Plug-ins in LR4 not showing

I seem to have a small issue with plugins showing as "Installed and Running" but the Presets aren't showing in the "Export with preset" panel. In particular the two plug-ins are HDR Efex from Nik Software and XRite Color Checker passport.
Everything seems to be OK as another plugin (LR Enfuse) is located in the same Modules folder in the Appdata/Roaming/Adobe/Lightroom foder and shows in the Plug-in Extras panel.
The PC is running Windows 7 x64 and the installation of Lightroom is 4.1 (latest) there is also CS6 etc on the PC and I haven't really had any problems before.
Even if I right click on a photo the two export presets in question don't show in the export panel.
The strange thing though is if I copy the Presets to directories I made in the "Export Presets" folder they show in the export panel under the names of the directories and they work ok.
Is there anyone who can think of a reason for this?

Hi,
I beleive I have come to the root of the problem, the relevant paths and settings folders are:
Library Path: C:\Users\HP-Dv4-DM\Pictures\Lightroom\Lightroom 4 Catalog.lrcat
Settings Folder: C:\Users\HP-Dv4-DM\AppData\Roaming\Adobe\Lightroom
FYI the system info is:
Lightroom version: 4.1 [829322] x64 ,
Operating system: Windows 7 Home Premium Edition x64, Version: 6.1 [7601]
(HP-Dv4-DM is the name of the PC) and it seems that Lightroom doesn't like the name "HP-Dv4-DM" but, short of renaming the PC and removing the user, I cannot work out if it is the "v" or the dashes in the name. The name "HP-Dv4-DM" is just a display name as the disk is not case sensitive so I assume it is the "-" in the name and affects only ".lrplugin" folders with presets in a "presets" folder within the plugin.
I moved the plugins to a folder in the Documents then the Pictures library and it still didn't work so I created a folder on the Root directory "LR-Modules" moved the plugins there and still had the same problem. When I renamed the folder to "LRModules" and reimported the plugins all was fine.
I guess I should report this as a bug? If any Adobe employee reads this give me some advice as to where I should place this.

Similar Messages

Help! Error "...'[Filename].indd' uses one or more plug-ins which are not currently available..." Wh

Hello guys,
I called Adobe for help on this, but they said my version of InDesign was too old for them to help me, which was really discouraging. I am getting an error when I try to open my InDesign files, which up until a couple weeks ago, opened fine. I am getting the error below:
Error "...'[Filename].indd' uses one or more plug-ins which are not currently available..." When Opening an InDesign 2.0.x Document
And it lists the following unfound plugins:
WorldReady.InDesignPlugin
LILO.InDesignPlugin
CellStyles.rpIn.InDesignPlugin
Conditional Text.InDesignPlugin
If I click okay to try to go past it anyway, I get the following error:
Error "...Cannot open '[Filename].indd'. Please upgrade your plug-ins to their latest versions, or upgrade to the latest version of Adobe InDesign.
And it lists the following unfound items:
AppFramework.framework
Image.framework
Table Model.framework
Spread.framework
Transparency.framework
CJKGrid.framework
Links.framework
Workgroup.framework
Assignments.framework
Print.framework
Graphics.framework
Linguistics.framework
Indexing.framework
Tet Attributes.framework
Open Place.framework
Layer.framework
Generic Page.framework
Hyperlinks.framework
XML.framework
Path Type.framework
Master Page.framework
BNCore.framework
Text.framework
Text Wrap.framework
Package and Preflight.framework
Document Framework.framework
CJK Text Attributes.framework
TOC.framework
XMedia UI.framework
Image Filters.framework
Utilities.framework
Color Management.framework
I tried to follow the post http://kb2.adobe.com/cps/327/327956.html, but I'm told I am "not authorized to view the content" on the partners page, so can't complete the instructions.
I've tried deleting and reinstalling CS2. I've tried removing my preferences. Neither have worked. I am close to just resorting to Apple's Pages for my layout design. If anyone can give some fixes here, I would really appreciate it.
Thank you!

function(){return A.apply(null,[this].concat($A(arguments)))}
bryanmcclure12 wrote:
I've tried deleting and reinstalling CS2. I've tried removing my preferences.
Verify that you are running ID CS2, InDesign version 4.x. What level are you patched to from the InDesign>About InDesign drop down splash screen?
The message alerts to files being version 2.0.x? that is 2 versions back, are these old files?
Can you create, open, edit, save new files?

I have just started with Logic X, having been a Logic 8 user for many years. I have some expensive plug-ins which are not being recognised by the news Logic. Where should I install them ? YoursdisillusionedbyLogic

I have some expensive plug-ins which are not being recognised by the new Logic. Where should I install them ?
I am using Mavericks OS, and I am considering transfering my choiceof DAW to Protools.
YoursdisillusionedbyLogic

Hi
LPX only supports 64bit Audio Unit plugins. You probably need to get the latest updates for all of your plugs.
Some plugs are not currently available as 64bit versions: you may want to try
http://www.soundradix.com/products/32-lives
CCT

Acrobat Plug-in loading but not showing in menu

I had developed an small plug-in in C++ using Acrobat XI SDK for Adobe Acrobat X pro.
the plugin works 100% in my development machine.
But when I copy the api file into other users computers the plug in does not show in the menubar.
when I generate a system report in Acrobat, the plugin is showing as loaded, but it doesn't show in any menu.
any idea?
someone told me that I need to register a prefix for my plug in, but I cannot find any location to register.
thanks
Oscar

Certainly you need to register a prefix, or you may duplicate the plug-in ID, menu ID, and selector and tool IDs from samples or other plug-ins.
But you can quickly test for this problem by removing all other plug-ins.
Check the "only registered plug-ins" option is off.
I can't advise using the Acrobat XI SDK for making Acrobat X plug-ins. Traditionally, uplevels SDKs will make plug-ins that don't load in older versions of Acrobat.

Great 3rd Plug Ins for Photo Slide show? (Sample attached)

Looking for something like this (slide show), and would like advice.
Thing is, some say you have to update the whole thing every time you add a photo, not sure why that is, interested in seeing what's out there. Appreciate any and all advice. Also looking into Rapid Weaver, seems okay, Themes are a little dull and the plug ins don't really explain the situation well, therefore, for now, I will stick to iWeb. I too am interesting in building a music site and this is why I am using this example.
Thank you.

If you create a web gallery with iPhoto, embed it into your web page you can then update the gallery and slideshow from iPhoto very easily without having to use iWeb again. Embedding a MMe gallery in an iWeb page is shown in this demo page: MobileMe Galleries and Quicktime Movies.
If you create an photo page in iWeb you can add new photos to it via the Media Browser and republish. Depending on where you're hosting the site you don't have to upload everyting each time. With MobileMe you can just use the Publish Site Changes and you'll only have to upload those pages that have been changed.
If you use a 3rd party hosting service you can publish to a folder, use Web Site Maestro to optimize and upload only those files that have been changed.
I don't know of any method that would allow you to just add more image files to a folder on the server as a way to add to the online photo presentation and slideshow.
If you're interested in a music site be sure to visit Roddy's iWeb for Musicians
OT

DNG files exported from LR4 not showing changes made when opened in PSE10?

I have LR4, and once I make some develop changes I've been exporting the files I want to use as DNG. I then open them in PSE10 to make final edits. It's been working fine, actually I had an older version of Adobe Raw in my PSE on my other computer. So when I opened in PSE it would ask if I wanted to conver to compatible version to edit in camera raw. I always said no b/c I didn't need to do anymore raw edits. Now that I have installed PSE on my new computer, it has the new ACR version I guess. When I open the DNGs to edit now I no longer get this error message, but it's showing my contrast, etc. as a standard raw setting instead of the changes I made in LR. Some are showing....like vibrance, but "recovery" which I know is "highlights" in LR, and other things are not showing correctly. I know that the options are different, but I don't want to use the ACR settings that it's using when I open the file, or have to go through them again. I'm sure there's something I'm missing but can't figure it out. Thanks for any help!

I quite simply did not comment on the issue of "it is supposed to be better to keep DNG files as opposed to NEF files now, right?"
The issue you raised in your original post, and the issue of choosing DNG versus NEF, are completely separate and independent.
The issue of transferring photos to PSE would cause the exact same problems in your case whether or not you use DNG or NEF.
On the issue of converting photos from NEF to DNG, there are advantages and disadvantages, some people do and some people don't. If you'd like to know more, I suggest you search this forum, there are plenty of discussions on this topic.

Manual update for plug ins and extensions not working

I've just noticed that when I attempt to manually check for updates either in plug ins and/or extensions from the gear symbol drop down screen that I get the drop down screen, but, the check for updates function does not work. It just sits there with nothing happening. I have to close the screen to get out of that function. Anybody know anything about this?

Thanks you for your comments. I would mention that this problem just started with the update to FF 37.0.4 I tried restarting FF in safe mode with no effect on the above mentioned problem. Any other thoughts?

Windows media player files will not play. I downloaded the plug in but does not show up under plugins. Why won't it load?

Whenever I try to play a wmv file through firefox it will not load. It was not a problem a few weeks ago. Under plugins it is saying I do not have windows media player. So I tried downloading it using the troubleshooting directions from firefox. But it still will not show up under plugins. Any help would be much appreciated.

'''np-mswmp''' in your Installed Plugins listing ''(in '''More system details''' to the right of your posting)'' is the Windows Media Player plugin for Firefox.

Powered plug-ins loader will not allow opening of FCP 6

Have the most current Mav OS installed on MBP Retina late 2013. When I try to open FCP 6 it comes up with this message:
Powered plug-ins loader reported error 2. Please re-install
Current plugin: UAD Modifilter
Well I unistalled it using UAD 5.4.1 driver which was the version that was installed. Since the MBP doesn't have a PCI slot I did this. Any other suggestions?

How did you install FCP 6 on to this computer? Because the latest OS doesn't let you do it without a lot of trickery. And the latest OS doesn't really support this really old FCP version...so that is an issue.

Once I put the Firefox Icon in Apps, it shows up as a white circle/slash (as in "no" or "stop") NOT the standard Firefox Icon. I checked plug-ins."Shockwave Flash" shows up Vulnerable. When I update, I get download warnings. (more below)

Downloaded Firefox and put it into my Apps folder as instructed. Its Icon in my Apps folder is not the Fox/Globe but a white icon of papers with a white circle&diagonal slash (like a white "stop" or do-not-enter sign). When I pulled that to my dock, it transferred there as the Fox/Globe; but I'm concerned about opening Firefox because that Icon in my Apps isn't right. I assumed the circle/slash icon telling me something's wrong with the App. So I checked the PlugIns.
The PlugIn tells me "Shockwave Flash" is "Vulnerable, Update Now." But there are warnings about that download. When I check that, showing I'm a Mac, it gives me warnings for Windows!- but no warnings for Macs. What's going on?!
Why am I not getting the standard Firefox Icon in my Apps folder?
I don't want to corrupt my HD by opening Firefox if that Icon is telling me somethings wrong... (which seems the point of its circle/slash).
This is all so unclear!

What is your current Flash Player version: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html ?
What is your display adapter, driver version & date? See http://forums.adobe.com/thread/945765

Plug-ins in browser not playing

Anything that uses Quicktime on any browser shows the quicktime symbol with a question mark through it. I have unistalled and reinstalled a few times both quicktime and my browser, it just wont work!

Hi,
I beleive I have come to the root of the problem, the relevant paths and settings folders are:
Library Path: C:\Users\HP-Dv4-DM\Pictures\Lightroom\Lightroom 4 Catalog.lrcat
Settings Folder: C:\Users\HP-Dv4-DM\AppData\Roaming\Adobe\Lightroom
FYI the system info is:
Lightroom version: 4.1 [829322] x64 ,
Operating system: Windows 7 Home Premium Edition x64, Version: 6.1 [7601]
(HP-Dv4-DM is the name of the PC) and it seems that Lightroom doesn't like the name "HP-Dv4-DM" but, short of renaming the PC and removing the user, I cannot work out if it is the "v" or the dashes in the name. The name "HP-Dv4-DM" is just a display name as the disk is not case sensitive so I assume it is the "-" in the name and affects only ".lrplugin" folders with presets in a "presets" folder within the plugin.
I moved the plugins to a folder in the Documents then the Pictures library and it still didn't work so I created a folder on the Root directory "LR-Modules" moved the plugins there and still had the same problem. When I renamed the folder to "LRModules" and reimported the plugins all was fine.
I guess I should report this as a bug? If any Adobe employee reads this give me some advice as to where I should place this.

Plug-Ins Not Showing In Logic Pro 9

Hey guys, I'm having some trouble with plug-ins in Logic Pro 9. Any of the third-party plug-ins I have installed (I've checked the location in the Components folder and they're all there, so I guess it's not something related to the plug-ins location) don't show up, even after rescaning the AU library, reopening Logic and all that stuff.
Anybody has a clue about what could cause this and how to solve it, please?
Cheers!

If you ran Logic Pro in 32bit mode first and then in 64bit mode.. any 32bit plugins which you have installed, will appear under either the Software Instrument button (In LP9) or the Insert FX button for a Software Instrument track....
If they dont then either..
You didn't install the AU version of the plugin.... in which case, please do so and then again run LP in 32bit mode and then 64bit mode to make the 32bit version appear in LP 64bit mode..
or....
You are not looking in the right place as shown below..
or...
You are trying to access a software Instrument on an Audio Track which wont work.. Create a Software instrument track and try again...
or..
You are not using a legal version of the 32bit plugin...... in which case, asking here is a bit of a dumb move...
Here is a screenshot of where the Software Instrument button is in LP9... Click and hold.. on it and look for the 32bit AU plugin sub menu and choose Sylenth...

Yamaha o1x Issue with plug ins not showing on the DAW

Hi everyone, Been a while since I have used the Logic program, and I have updated the software as it was developed over the years. First I have already discovered that the Mlan will not connect in 64 bit mode and boot my macbook pro in 32 bit. I completed a mix a few weeks ago and need to eq certain areas and this job would be a breeze using my Yamaha O1x which is old but still works marvelously but the plug ins controls are not appearing on the DAW which is most frustrating. I am doing a number of experiments ( Which I would prefer not to ) to see if any plug ins work and plan two is to use an old 12" power pc and load an older version of logic and use the dongle to finish this up, failing that I guess I will have to do the finger dance with my track pad. Anyone have this issue? Anyone using a newer operating system and current logic pro using an O1x and having no issues? Thanks for reading. Cheers Chris

Not sure those plugins will work on recent versions of OSX and Logic, but if they could work it won't be on the initial version of OSX 10.7.5 which had a serious AU plugin problem... er.. BUG!
See if the supplemental update helps... (I would reboot after installing)
http://support.apple.com/kb/DL1599
If not, going back to the older PPC system may be the only choice.
I set up an O1X in a small studio many years ago, nice mixer, we used a digital patchbay and a master wordclock to sync up various digital devices.

Migrating PS CS3 to Intel with OS 10.5.6 Plug-ins Not Available

After migrating CS3 to MacBook Pro, 10.5.6, a list of unavailable plug-ins comes up. All except two were PS plug-ins, NOT aftermarket. Sure enough, they don't show up in the filters menu. I don't know where else they are missing. (migrated from Powerbook 10.4.11)
What is to be done?
CS3, OS 10.5.6/ MB Pro 2GB ram, 2.4 Ghz

Migrating is never a great idea, but migrating an application originally installed under Tiger on a PowerPC machine to a Mac-Intel box running Leopard goes beyond being a monumentally bad, horrendous idea. It's sheer lunacy!
You need to wipe out that drive, or at least use the Adobe Uninstaller (installed by CS3 in Applications/Utilities/Adobe/ on your old machine), look for, download and run the CS3Clean script, and then install the application from the original media.
Also, realize that any plug-ins that were not written in Universal Binary will NOT run under CS3 on the Mac-Intel machine,
unless you run CS3 under Rosetta software emulation with a corresponding
massive performance hit.
Never, ever try
"migrating" again. :(

I run logic pro 9.1.5 in 64 bit mode on lion osx and my waves plug ins won't show up. Any suggestions?

recenlty i purchased the Kramer mpx master Tape plug in from waves and i try to make it work in logic but no luck.. I switch it as well in 32bit mode some plug ins from wave are showed up but they are not operational. There are a few of them that i can load up... but the ones i really need are really not there..
Have the logic pro 9.1.5 on lion osx and a mac pro early 2008 model...
Any suggestion that i can every works fluently like it suppose to work?
thanks in advance

The crashed thread (7) mentions logic's preferences file. (com.apple.logic.pro). Drag it to the desktop (so you can reclaim you key commands if it works) and restart logic. Logic will create a new preferences file. Worth a try..

Plug-ins in LR4 not showing

Similar Messages

Maybe you are looking for