Plug ins not indicating presets/number

Wondering if anyone may know what may be causing the preset selection on plug-ins not to show anymore. I'm getting this (_ _ _), instead of what used to be preset 01, 02, or 03 etc..... .I'm thinking maybe I need more ram, or the battery on my mac is running low, but I'm not sure.

In response to your questions
1. I did not install them. They were installed by CS4. (I have the CS4 premium production suite for Mac)
2. Correct.-- the project that I opened shows the plugin. And the plug-in is fully operational. All the parameters work.
3. Correct--. the plug-ins are not found in the Effect menu, nor the Effects and Presets panel but they are in the Plug-un Folder (see below). This makes me wonder how many more plugins I have that I cannot get access to. I realize that all of the features in the PSClassic and PS LE Classic are probably in the Particle System II, but using the PS Classic was easy and straight forward compared to figuring out all of the parameters in Particle system to get similar results.
Notice the date on the plug-in in the attached picture (Created 6/22/09)
If you have CS3 or CS4 you probably have these plugins in your folder also. The last copyright on the book is 2004.

Similar Messages

Photoshop CS5 Extended -- Optional Plug-ins, Extensions and Presets

I am using Photoshop CS5 Extended.
I downloaded the Optional Plug-ins, Extensions and Presets file, unpacked it the desktop. All I wanted was the SGI file format, which works very well and the legacy textures.
As per the PDF file I copied the "Textures directory" to C:\Program Files\Adobe\Adobe Photoshop CS5 (64 Bit)\Presets
The instructions stated just restart Photoshop and the deal was done.
Only it didn't work. The legacy textures are not available in the texturizer

Have you tried changin the texture selector using the sidearrows?

Migrating PS CS3 to Intel with OS 10.5.6 Plug-ins Not Available

After migrating CS3 to MacBook Pro, 10.5.6, a list of unavailable plug-ins comes up. All except two were PS plug-ins, NOT aftermarket. Sure enough, they don't show up in the filters menu. I don't know where else they are missing. (migrated from Powerbook 10.4.11)
What is to be done?
CS3, OS 10.5.6/ MB Pro 2GB ram, 2.4 Ghz

Migrating is never a great idea, but migrating an application originally installed under Tiger on a PowerPC machine to a Mac-Intel box running Leopard goes beyond being a monumentally bad, horrendous idea. It's sheer lunacy!
You need to wipe out that drive, or at least use the Adobe Uninstaller (installed by CS3 in Applications/Utilities/Adobe/ on your old machine), look for, download and run the CS3Clean script, and then install the application from the original media.
Also, realize that any plug-ins that were not written in Universal Binary will NOT run under CS3 on the Mac-Intel machine,
unless you run CS3 under Rosetta software emulation with a corresponding
massive performance hit.
Never, ever try
"migrating" again. :(

I am using CS4. Can I open CS6 files? I am receiving "plug-ins not available on your system" messages and I'd like to open anyway but clicking on OK doesn't work.

I am using CS4. Can I open CS6 files? I am receiving "plug-ins not available on your system" messages and I'd like to open anyway but clicking on OK doesn't work.

InDesign CS4 can open .indd, .indt and .inx files from earlier versions, but not from later. It should, however, be able to open .idml files saved or exported from newer versions, with the understanding that unsupported features will be lost, text will probably reflow due to differences in texts engines between versions, and that the greater the gap between versions the more likely there are to be noticeable differences from the original. You will need to be sure CS4 is at version 7.0.6 to read the .idml.

3rd Party Plug-Ins Not Listed Under Inserts

I have recently installed two 3rd party plug-in software - Stylus RMX and Kontakt 2. I installed the latest versions of the software that are compatible with an Intel based Mac. They appear under the library/audio/plug-ins/components but they do not appear under any of the headings in the Inserts tab.
Do you I have to reinstall Logic Express 8 after installing the plug-ins? Do I have to direct Logic Express 8 to the components directory. I have read all the manuals and I cannot find the solution.
Please help.

Thanks for the quick response. The RMX plug-in is in the Audio Units Manager. When I Reset and Rescan I get the following response which at the end is a pass, but the RMX plug in still does not show up in the Inserts tab.
Cabarete
Software response:
validating Audio Unit Stylus RMX by Spectrasonics:
AU Validation Tool
Version: 1.2.1b3
Copyright 2003-2007, Apple, Inc. All Rights Reserved.
Specify -h (-help) for command options
VALIDATING AUDIO UNIT: 'aumu' - 'Styl' - 'GOSW'
Manufacturer String: Spectrasonics
AudioUnit name: Stylus RMX
Component Info: Stylus Audio Unit.
Component Version: 1.6.1 (0x10601)
Component's Bundle Version: 1.6.1
* * PASS
TESTING OPEN TIMES:
COLD:
Time to open AudioUnit: 44.468 ms
WARM:
Time to open AudioUnit: 0.124 ms
FIRST TIME:
Time for initialization: 0.009 ms
* * PASS
VERIFYING DEFAULT SCOPE FORMATS:
Input Scope Bus Configuration:
Default Bus Count:0
Output Scope Bus Configuration:
Default Bus Count:8
Format Bus 0: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 1: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 2: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 3: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 4: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 5: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 6: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 7: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
* * PASS
VERIFYING REQUIRED PROPERTIES:
VERIFYING PROPERTY: Sample Rate
PASS
VERIFYING PROPERTY: Stream Format
PASS
VERIFYING PROPERTY: Maximum Frames Per Slice
PASS
VERIFYING PROPERTY: Last Render Error
PASS
VERIFYING PROPERTY: Instrument Count
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/0], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/1], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/2], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/3], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/4], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/5], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/6], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/7], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Group/0], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Part/0], which should be invalid.
PASS
* * PASS
VERIFYING RECOMMENDED PROPERTIES:
VERIFYING PROPERTY: Latency
PASS
* * PASS
VERIFYING OPTIONAL PROPERTIES:
VERIFYING PROPERTY Supported Number of Channels
PASS
VERIFYING PROPERTY Tail Time
PASS
VERIFYING PROPERTY Bypass Effect
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/0], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/1], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/2], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/3], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/4], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/5], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/6], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/7], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Group/0], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Part/0], which should be invalid.
PASS
VERIFYING PROPERTY Render Quality
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/0], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/1], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/2], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/3], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/4], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/5], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/6], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/7], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Group/0], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Part/0], which should be invalid.
PASS
VERIFYING PROPERTY Host Callbacks
PASS
* * PASS
VERIFYING SPECIAL PROPERTIES:
VERIFYING CUSTOM UI
Carbon View Components Available: 1
auvw StyM VST - Spectrasonics View
PASS
Cocoa Views Available: 0
DEFAULT PRESET: 0, Name: unused
auvaltool(714) malloc: * error for object 0x13d3f850: double free
* set a breakpoint in mallocerrorbreak to debug
HAS FACTORY PRESETS
VERIFYING CLASS INFO
WARNING: Preset name is not retained in retrieved class data
PASS
TESTING HOST CALLBACKS
PASS
* * PASS
PUBLISHED PARAMETER INFO:
# # # 74 Global Scope Parameters:
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
* * PASS
FORMAT TESTS:
Reported Channel Capabilities (explicit):
[0, 2]
No Input, Output Chans:
0-1 0-2 0-4 0-5 0-6 0-7 0-8
X
WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:1
WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:4
WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:5
WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:6
WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:7
WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:8
* * PASS
RENDER TESTS:
Output Format: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Render Test at 512 frames
Slicing Render Test at 64 frames
PASS
Render Test at 64 frames, sample rate: 22050 Hz
Render Test at 137 frames, sample rate: 96000 Hz
Render Test at 4096 frames, sample rate: 44100 Hz
Render Test at 4096 frames, sample rate: 192000 Hz
Render Test at 4096 frames, sample rate: 11025 Hz
Render Test at 512 frames, sample rate: 48000 Hz
PASS
Checking parameter setting
Using AudioUnitSetParameter
Using AudioUnitScheduleParameter
PASS
* * PASS
AU VALIDATION SUCCEEDED.
validation result: successfully validated
updating properties of AU Stylus RMX by Spectrasonics...done.

Nik Software Plug-ins not working with LR3

Hello,
I have both LR 2.7 and LR3 running on my computer. When I installed LR 3, it load the Nik software plug-ins into the external editor section like LR 2.7. However, when I try to use a Nik plug-in in LR 3 I get an error message that the " File xxxxx.tif can not be opened because it does not exist or access is denied." The Nik interface opens, then I get this error message, but then it places the xxxxx.tif file in the film strip. The plug-ins work just fine with LR 2.7. I've uninstalled and re-installed the plug-ins, but the same error message pops up in LR 3. I have contacted Nik Software, but have not gotten an answer that works. Has anyone else had this problem? If so, what was your solution. I've tried everything I know of except uninstalling LR 3 and re-installing. I'm using Windows 7 64bit. I have CS4 (32 and 64bit) and CS5 (32 and 63bit) running and the plug-ins work just fine with them.
Thanks for your help in advance!
Dennis

Hi Martin,
You might try going in the pref and under external editing and try to manually set up each one. Go down to additonal external editing. Click on Choose and then go to the folder where you have your Nik software installed and choose the program file. There will be dialog box telling you to name the file, call it anything you want and the click ok. Go to the drop down bar and select Save as new preset. Close LR3 and then reopen and check to see if your program is there under the new name. If not, you probably will have un-install all the plug-ins and re-install. Hope this helps!
Dennis

Effects plug-ins, and user preset weirdness

Here's a headache for you.
I've noticed that when using VST/DX effects in Audition that it adds its very own load/save preset bar to whatever effects application is in use, and that when saving presets with this quick access bar that it doesn't appear to save the presets anywhere within said efx plug-in's program directory.
The end result is that user created presets saved in this way won't show up using said plug-ins in any other audio editing program.
Audition manages to associate the proper user presets with their respective plug-ins, which leads me to believe it's saving the information in specific files/directories pertaining to each plugin.
I've rooted around a bit in Audition's program directories and so far have come up with no helpful leads.
This leads me to my question: where the hell Audition is saving these presets on the hard drive?

Tell me, have you noticed AA not saving your VST/DX plugin settings from session to session? That is, it resets itself to a "default" setting when you exit the session and when you return to the session your effect settings are no longer in the state you left them, but in a "default" state.
(This doesn't occur in any Pro Tools or Acid Pro, both of which "remember" the state in which I left them...)
Your observation of AA adding its own preset bar is interesting. Pro Tools and Acid don't do that. I wonder if that has anything to do with the issue I described...?

Yamaha o1x Issue with plug ins not showing on the DAW

Hi everyone, Been a while since I have used the Logic program, and I have updated the software as it was developed over the years. First I have already discovered that the Mlan will not connect in 64 bit mode and boot my macbook pro in 32 bit. I completed a mix a few weeks ago and need to eq certain areas and this job would be a breeze using my Yamaha O1x which is old but still works marvelously but the plug ins controls are not appearing on the DAW which is most frustrating. I am doing a number of experiments ( Which I would prefer not to ) to see if any plug ins work and plan two is to use an old 12" power pc and load an older version of logic and use the dongle to finish this up, failing that I guess I will have to do the finger dance with my track pad. Anyone have this issue? Anyone using a newer operating system and current logic pro using an O1x and having no issues? Thanks for reading. Cheers Chris

Not sure those plugins will work on recent versions of OSX and Logic, but if they could work it won't be on the initial version of OSX 10.7.5 which had a serious AU plugin problem... er.. BUG!
See if the supplemental update helps... (I would reboot after installing)
http://support.apple.com/kb/DL1599
If not, going back to the older PPC system may be the only choice.
I set up an O1X in a small studio many years ago, nice mixer, we used a digital patchbay and a master wordclock to sync up various digital devices.

Why are my plug-ins not recognized by Photoshop CS5?

Hello,
It seems my plug-ins are not recognized at all by Photoshop CS5:
- Imagenomic
- Photokit Sharpener
- Photomatix
and even the - Optional Plug-ins given by Adobe are not working
I get a panel that says:
"could not complete your request because Photoshop doesn't recognize this type of file"
Am I doing something wrong?
The plug-ins are in:
Applications>Adobe Photoshop CS5>Plug-ins>Automate>PK Sharpener
or
Applications>Adobe Photoshop CS5>Plug-ins>Optional Plug-Ins
or
Applications>Adobe Photoshop CS5>Plug-ins>Imagenomic
or
Applications>Adobe Photoshop CS5>Plug-ins>Filters>Tone Mapping
Thanks for your help!
Emilie

sorry I've found the answer... not running in 32 bits... What a shame...

Error message Plug-ins not upgraded, cannot open

A client sent me a CS3 InDesign that won't open. It says my plug-ins are not upgraded. It lists all the plug-ins and they
are features that already exist in InDesign such as preflight and collect. How can I get the file to open?

I cannot insert the screenshot .jpg's into my e-mail. So here are the messages:
Error message 1.)
CONDITIONALTEXT.RPLN
WORDREADY.RPLN
The "file.indd" uses one or more plug-ins which are not currently available on your system. Do you want to open anyway?
Error message 2.)
List of 21 plug-ins (many in this list are standard items in my CS3 InDesign such as preflight)
Cannot open "document.indd" please upgrade your plug-ins to their latest versions or upgrade to the latest version of Adobe InDesign.
InCopy is listed as one of the plug-ins. Does that tell you something? Let me know if you need additional information.
Thanks,
WZ
WZ DESIGN | 135 PROSPECT ST. | PROVIDENCE, RI 02906 | 401.323.4975
WWW.CREATIVESHAKE.COM/WZDESIGN

Adobe Acrobat Pro X - plug-ins not loaded

I recently purchased Adobe Acrobat Pro for our company with multiple user licences. Once installed I noticed a lot of features which were in previous versions are not available. When I select the “Help” “About Adobe Plug-ins...” tab, almost all of the plug-ins are not loaded. Is this right and if not, how do I fix it. After reading numerous blogs I still do not have an answer – most refer to 3rd party plug-ins but not to this problem. NB: I am not an IT expert, but can help myself fairly well on software. Using Windows 7. Uninstalled Google Chrome as someone suggested it affects the plug-ins (which also did not solve the problem!)

It's working correctly.
The Help > About Adobe Plug-ins dialog shows the status of dynamic extensions which ship with Acrobat - not third-party plugins you may have installed yourself. These core extensions are loaded on demand, so if you don't have a document open, very few of them will be loaded. It's why the dialog bothers to tell you their status in the first place.
Third-party plugins need to be reinstalled if you upgrade to Acrobat X, as the installation folder is different. Some that were written for previous versions won't work with Acrobat X, especially if they're not designed to cope with the Tools Pane or Protected View in 10.1, but they will not appear on that dialog - they appear on the next menu item down, "About Third-Party Plug-ins".
The UI in Acrobat X is radically different from previous versions, but very few features are actually missing - what are you looking for that you can't find?

Plug-ins not showing up in Aperture 3.1

I have been using Aperture for a past few days, and when i tried to instal two plug-in programs (photoshelter - it is a photo hosting site and the plug in allows you to upload photos directly to the site, and HSC edit - this is an edit tool I downloaded from the Apple site). Neither of them show up in the menu of Aperture. I tried re-installing, but doesn't work. what could i be doing wrong?

Frank,
I have a similar situation that you seem like you might understand.
I bought a new computer, started a new user (A), and downloaded Aperture. Then I realized it was easier to move the pictures from my old computer by transferring everything from that computer, creating another user (B) on my new computer. Since then I havent used user A at all, but now I can't access plug-ins for Aperture. Based on your posts above I checked user B and sure enough there are the plug-ins. I tried to repair permissions in the disk utility, and that didn't help. I restarted the program after each try.
Any idea of what I might try next?
On a separate note, I've been unhappy with this new macbook pro from the start, as compared to my old macbook, in terms of speed. Plus the battery life *****, which is a main reason i ditched the last one, no where near as advertised. Could an extraneous unnecessarily running/ partitioned in the background be creating any problems for speed or battery life? Or was dumping in everything from my old computer a bad idea?
Thanks in advance to anyone who can help.

Korg Wavestation Plug ins not appearing in Logic 9.1.3

Hi all;
New to the Forums and Logic. I just upgraded to Logic Express from Garageband and Im still pretty new. I am finding my way around ok but I am having an issue with my Korg Wavestation Plug ins showing up in Logic.
They show up fine in Garageband, and if I open a Garageband Project that used Wavestation instrumentation they are there too.
However, If I start a new projct The choice for Wavestation does not appear, only the Apple Plug ins. I went into the AU manager and KORG wavestation is listed nd I tried uninstall and reinstall. Am I supposed to use MIDI in stead of sofware instrument ?
BTW its Korg Legacy Collection v1.6.6 Logic is v 9.1.3 and Its on a MacBook Pro 2.4 GHZ Duo Core with 8GB RAM
Any help appreciated... I searched but couldnt find any relevant threads
M

Set Logic to open in 32-bit mode, then open a default empty project (not one you're working on) Logic should validate the plugins... after it's finished, close Logic, re-set to 64-bit mode and you should be ok.

Editing software filters/plug-ins not showing in LR 5.4

I have editing software and plug-ins that I use mostly in LR, but now I notice when I use them, the filters don't show up. I have Google Nik Collection, Topaz suite, Photomatix and Perfect Effects 8. I went to my LR preferences >external editing and the first editor I have is Photoshop. The sdditional external editor is HDR Efex pro 2. In the Additional editor, should I be making that a new preset, or as a custom preset. Am I only limited to 2 choices in the External editing preference pane?
I notice that in the File>Export w/Preset, it lists HDR Efex Pro and Photomatix Pro. Under file>Plug in extras, it lists Perfect Effects 8, and again, Export to Photomatix Pro. Opening any of them, the filters don't appear like they used to. What am I overlooking? This is making me crazy with loss of time since I have a show coming up. Any pointers would be appreciated.
I am using a Mac, OS Mavericks which I just installed a couple of weeks ago.

It isn't obvious, but you can add as many external editors as you want. In Preferences/External Editing, hit the Choose button, select an application, then from the dropdown select "Save current settings as new preset". Repeat as needed.
Hal

Plug ins not showing

After migrating from tiger on a powerbook G4 to snow leopard 10.6.7 on 2.93 GHz i7 imac. all my plug ins are not showing in Garageband 11 (Atmosphere, Rmx, trilogie, FM7 etc ...)where should they go? I put some in HD> library> audio> plug-ins> components ... but still none showing when I am in GarageBand.
Thank you for your patience

You need to make sure that they are Universal Binaries, you can't use PPC plug-ins on an Intel machine.
You might need to see if there are updates available from the mfg.

Plug ins not indicating presets/number

Similar Messages

Maybe you are looking for