Plug Solution Manager data into CR reports
Hi *,
my first post, so apologies if I'm in the wrong Forum or doing some other typical newbie things..
My management asked me to find out whether it is possible to connect the data from solution manager within my crystal reports!?
Are there any built functions, adapterts now that Businnes Objects is SAP?
Main focus would be to gather data from the 'Early Watch Reports' and put this into our Crystal Reports.
thx for any hints.
David
Hi David,
To create a report based on the SAP R/3 and BW will have to install the BusinessObjects integration kit for SAP. I am afraid if Early watches can be use with Crystal Repots.
Regards,
Aditya Joshi
Similar Messages
-
Service manager console can't connect to Service manager data warehouse SQL reporting services
When I start Service manager console, it gives this kind of error:
The Service Manager data warehouse SQL Reporting Services server is currently unavailable. You will be unable to execute reports until this server is available. Please contact your system administrator. After the server becomes available please close your
console and re-open to view reports.
Also in EventViewer says:
cannot connect to SQL Reporting Services Server. Message= An unexpected error occured while connecting to SQL Reporting Services server: System.Net.WebException: The request failed with HTTP status 401: Unauthorized.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.EnterpriseManagement.Reporting.ReportingService.ReportingService2005.FindItems(String Folder, BooleanOperatorEnum BooleanOperator, SearchCondition[] Conditions)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String searchPath, IList`1 criteria, Boolean And)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String itemPath)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItem(String itemPath, ItemTypeEnum[] desiredTypes)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.GetFolder(String path)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReportingGroup.Initialize()
at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath, NetworkCredential credentials)
at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath)
at Microsoft.EnterpriseManagement.UI.SdkDataAccess.ManagementGroupServerSession.TryConnectToReportingManagementGroup() Remediation = Please contact your Administrator.
We have a four server set-up where SCSM, SCDW, and sqls for both are on different servers. Also I have red that this could be a SPN problem, but this has been worked on last week without the SPNs.On the computer you get the "SQL Reporting Services server is currently unavailable" message please open the Internet Explorer and try to connect to the URL <a href="http:///reports">http://<NameOfReportingServer>/reports
This should open the reporting website in IE. If this isn't working you should check the proxy settings in IE. If the URL doesn't work in IE it won't work in the SCSM console as well (and vice versa).
Andreas Baumgarten | H&D International Group
Actually I can't access to the reporting website. It asks me credentials 3 times and then return a blank page. Also error message comes to the EventViewer System log with id 4 and source Security-Kerberos.
The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server "accountname".
The target name used was HTTP/"reporting services fqn". This indicates that the target server failed to decrypt the ticket provided by the client.
This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using.
Ensure that the target SPN is only registered on the account used by the server.
This error can also happen if the target service account password is different than what is configured on the Kerberos Key Distribution Center for that target service.
Ensure that the service on the server and the KDC are both configured to use the same password.
If the server name is not fully qualified, and the target domain (domain.com) is different from the client domain (domain.com), check if there are identically named server accounts in these two domains,
or use the fully-qualified name to identify the server.
I can access the website directly from the server which hosts Reporting Services.
Also I query "setspn -Q HTTP/"reporting services fqn" whit result NO SUCH SPN FOUND. -
Step- by- Step on How to Load Excel data into Crystal Reports?
Hi Friends,
Can anyone send me a Step- by- Step on How to Load Excel data into Crystal Reports? Pls help me. Thanks in Advance.
VijayIt's also important to 'prep' the excel file prior to connecting to it.
Give the data tab a meaningful name
Make sure the column headers are unique and that every column has a header
Delete any blank tabs
If you have trouble with Excel changing the data type of a field (say, a social security number you want to be a string value rather than a number so you don't lose leading zero) an alternative would be to save the spreadsheet file as a CSV, create a schema.ini to specify the data types for each column (example below) and use the same steps to connect except instead of choosing Excel 8.0, scroll to the bottom and choose Text. You have to make sure the CSV file is in the same folder as the schema.ini file that defines the columns.
Schema.ini example:
200912PUSD.csv
ColNameHeader=True
Format=CSVDelimited
MaxScanRows=25
CharacterSet=OEM
Col1=SSN Char Width 9
Col2=LAST_NM Char Width 25
Col3=FIRST_NM Char Width 25
Col4=DOB Date
Col5=STDNT_ID Char Width 10
Col6=SORTKEY Char Width 10
Col7=SCHOOL_NM Char Width 30
Col8=OTHER_ID Integer
Col9=GRADE Char Width 2
The filename in the first line needs to have the [] brackets around it, but I couldn't get it to display in this forum correctly.
Edited by: Eric Petersen on Jan 27, 2010 9:40 AM -
Solution Manager Data Extraction for BW
Hi,
We have a Solution Manager in place for SAP Systems. Our requirement is to extract data from Solution Manager into BW and provide BW Reports for Solution Manager Reporting & analysis.
What are the standard DataSources/Extractors available in solution manager for this?
What are the Business Contents (Infosources) available in BW?
Any help will be rewarded.
Regards
PrasadHi Prasad,
have you already found the related IMG tree? It guides you through the setup.
Transaction SPRO -> SAP Reference IMG -> SAP Solution Manager -> Scenario-Specific Settings -> Operations -> BI Reporting
transaction: RSA5 (Installation of DataSource)
- 0SM_SMG_ROOT Oberster Knoten Solution Manage
-- 0SM_SMG Solution Manager
--- 0SM_DSWPBI_DB390
--- 0SM_DSWPBI_DB400 DB400 Data
--- 0SM_DSWPBI_DBADA Adabas Data
--- 0SM_DSWPBI_DBDB2 DB2 Data
--- 0SM_DSWPBI_DBINF Informix Data
--- 0SM_DSWPBI_DBMSS SQL Server Data
--- 0SM_DSWPBI_DBORA Oracle Data
--- 0SM_DSWPBI_MODUL Module Data
--- 0SM_DSWPBI_PERF Performance Data
--- 0SM_DSWPBI_SERVER Server Data
--- 0SM_DSWPBI_SYSDATA System Details Data
--- 0SM_DSWPBI_SYSTEM System Data
Best regards,
Ruediger Stoecker -
How to Use Solution Manager to collect Status Reports from Consultants
Hi,
I am planning to use Solution Manager for collecting the weekly status reports from my consultants and maintain it as a repository . Please let me know the best way of doing this in SOLMAN. There should be mailing options too.
BR,
RajHi Rajasan,
to be able to meet this requirement, you need to set up plan working load in admin tab for your resource, they need to update actual data based on the work completion, you will get status of work,
if you require email, you need to set-up scot, then develop a program with execution scheduling
please check and revert
Anil -
Solution Manager 4.0 BI Reporting Content for SP13
Hi,
I'm looking for a listing of BI Reporting Content for Solution Manager 4.0 SP13. I've heard rumors that standard BI Reporting content exists for the Change Request Management and Service Desk domains, but all I can find are references for system and performance report content for SP12.
See the matrix of content listed in help.sap.com at this url... <a href="http://help.sap.com/saphelp_sm40/helpdata/en/44/1ed74368b66491e10000000a1553f7/content.htm">SP12 SolMan BI Reporting Content from help.sap.com</a>
Any guidance for standard BI reporting content for SolMan Change Request Management or Service Desk domains would be appreciated.
Thanks,
JoshI was on session LCM264 - Reporting and Performance Analysis Using SAP NetWeaver BI at TechED and there was no talking about Change Request Management or Service Desk reporting.... This doesn't mean it's not available but I have never heard about it...
I'm setting up Performance Analysis right now and it is working really fine.
/Mikael -
Solution Manager data upload/synchronize from SMSY to Marketplace
Hi Experts,
One of our SAP System data has got deleted from SAP Marketplace system data maintenance section. The data is available in SMSY transaction of our solution manager system.
I would like to know if there is any way that we can populate/synchronize the data available in SMSY to Marketplace System Data.
Please advice on this.
Rg,
Sandeep.Hi Anil,
This issue is resolved now and i was able to populate data from SMSY to System data in marketplace.
using SMSY - select system - system data in support portal - synchronize.
It uploaded data from SMSY to OSS and all details are visible now.
Rg,
Sandeep. -
How to set Solution Manager mail the EWA reports
Could anyone suggest me how to setup email for getting EWA report
Hi Bill,
1. I would assume you have already configured Early Watch to report to Solution Manager.
2. SCOT configuration done and e-mails can be sent out.
If so,
Go to --> Solution_Manager --> and Go to the solution --> Edit --> Automatic E-mail transmission
and give the e-mail addresses there.
Hope this helps,
Regards,
Krishna -
Solution manager Data Migration Solaris to AIX
Hi Gurus,
We are planning for migration our solution manager from Solaris to AIX .
I want to know the best method to do the migration.
We are currenlty on Solman 7.0 EHP1 SP23.
Please let me know if anyone has done this before or can suggest domething on this.
DevHi,
You need to do heterogeneous system copy for this using sapinst.
Thanks
Sunny -
How to feed data into crystal reporte with "SQLQuery" method in c#?
Hi there,
I've an old app that was written in VB with some crystal reports from Crystal Report 7.
Now I need to upgrade this old app into c# with newer version of Crystal Report, so we decide to go for VS2010.
I can open the report template in the VS2010 without any problems.
But I'm running into some issue here:
the old report has multiple tables from a SQL db as the connection. Each table has a PK to each other.
and the VB code feed the data like below:
MainForm.CrystalReport(1).SQLQuery = SQLString
I couldn't find any reference for "SQLQuery" method in the C#, is there such command exist?
Thank you in advanced,Thank you Ludek. Looking into the info you provided.
-
Service Manager data warehouse SQL Reporting Services server is currently unavailable
I keep getting this error when I launch my SCSM Console. Take a look at the event log > operation manager and saw this error message below.
Tried to google around but unable to find any solution to it. Anybody can enlighten me on this issue that I am encountering? Thanks
Cannot connect to SQL Reporting Services Server. Message= An unexpected error occured while connecting to SQL Reporting Services server: System.Net.WebException: The request failed with HTTP status 404: Not Found.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.EnterpriseManagement.Reporting.ReportingService.ReportingService2005.FindItems(String Folder, BooleanOperatorEnum BooleanOperator, SearchCondition[] Conditions)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String searchPath, IList`1 criteria, Boolean And)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String itemPath)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItem(String itemPath, ItemTypeEnum[] desiredTypes)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.GetFolder(String path)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReportingGroup.Initialize()
at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath, NetworkCredential credentials)
at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath)
at Microsoft.EnterpriseManagement.UI.SdkDataAccess.ManagementGroupServerSession.TryConnectToReportingManagementGroup() Remediation = Please contact your Administrator.
JeronHi,
This may occur when there is a mismatch between the Report Server URL entered on the SSRS Server Location window for the Report Deployment Wizard and the SSRS Web Service Virtual Directory for the Reporting
Services Configuration Manager.
Use the following steps to resolve the issue:
Launch the Reporting Services Configuration Manager on the server hosting SSRS
Select Web Service URL
Copy the value entered in the Virtual Directory textbox
Paste it after the last forward slash in the Report Server URL textbox in the Report Deployment Wizard
Continue on with the deployment
In addition, we may need to check you default web server IP is 'all unassigned', and ping the machine and see what default ip it has assigned.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
Exit Required for copy Warehouse Management data into quant
Hi Gurus,
Please refer the exits which are available for warehouse management(lt06,lt12) either in transfer order creation or in confirmation for copy certain field value in quant entry.
thanks.issue resolved
-
Early watch Report issue in Solution Manager
HI
I have configured the EWA report for system in Solution Manager 4.0 and report is generating but the issue is in the report EWA for Solution following section remain empty
Workload and Performance Analysis
Exception Analysis and Change Analysis
and one more issue for our production system the EWA report status is showing Not Productive
Thanks for your help
Harish>
Harish Kumar Jaiswal wrote:
> I have configured the EWA report for system in Solution Manager 4.0 and report is generating but the issue is in the report EWA for Solution following section remain empty
>
> Workload and Performance Analysis
> Exception Analysis and Change Analysis
>
> and one more issue for our production system the EWA report status is showing Not Productive
Please check, whether the managed system is well prepared.
It requires add-ons ST-PI and ST-A/PI, data in workload statistics ST03N.
Run RTCCTOOL via SE38 and check the results.
See SAP Note 91488
Ruediger -
How to Check UPL data collection at Solution Manager
Hello,
I had activated UPL data collection as per the document How to Guide –SAP Custom Code Management Usage and Procedure Logging.
I can check UPL data in my managed system by Report “/SDF/SHOW_UPL"
But I am not able to get the same data in Solution Manager by this same repot (/SDF/SHOW_UPL).
When I run this report in solman it show me only Solution manager data.
How I can read Manage System data in Solman? And what are the check point (for both Solman and Manage system) I need to check for ensuring my UPL date collection is working fine.Set up CCLM and the custom code setup and you will be able to view UPL data that way,
-
Import of Solution Manager reference data to ARIS
Hi all,
I would like to import SAP Solution Manager data to ARIS.
Is it possible to perform that simply importing a SolMan file including reference data to ARIS or do we need to create an interface between SolMan and ARIS?
We would like to do this in the most simple way as possible since it is for demo purposes only.
So if you have any idea please let me know.
Thanks,
//AndersAnders,
I have done similar demos in the past. based on my experience I am giving a quick step by step procedure for doing this.
Create Project in SAP Solution Manager and define system landscape by choosing the
SAP components based on the selected scenarios.
(ii) Analyze and Select the content from the Solution Manager BPR based on the
finalized Scenarios/Processes.
(iii) Establish a Project Database on the ARIS Server and merge the As-Is Scenario/Process
from the existing ARIS DB into this.
(iv) Synchronize Solution Manager Project with ARIS and establish the link between
ARIS Project DB and SolMan.
(v) Perform analysis of the As-Is Process in conjunction with selected scenarios from Solution
Manager reference content and define the structure and scope.
(vi) Align the As-Is Process with the Reference Framework from Solution Manager and
add/delete steps as required.
(vii) The Business process architecture is adapted to the SAP Reference Content aligned to the
structural layers of Solution Manager (Scenario, Process and Process Step).
(viii) Synchronize the Business flows created in ARIS with Solution Manager and update
structure on both ends.
Hope this helps you. Let me know if you need anyother information.
Rgds
Manish
Maybe you are looking for
-
Error while fetching data from CRM system to BW
I am extracting data (BP ID) from CRM system. I have upgraded the BI 7.0 system from patch 12 to patch 14. After upgrading when i execute the infopackage to fetch the data from the CRM system. The request is coming in yellow and is not fetching the d
-
Unreadable codes shows in PDF report.
Hi, I need to export PDF report via OAF page. But thers is some unreadable codes(Actually is chinese character) shows in PDF report. So, would you please help me out. BTY: Both rtf and xml have chinese character. CO:processFormRequest: if (pageContex
-
Flat files data comma separated using SSIS.
Hi, I have multiple flat files which come in comma separated columns. See example below : Customer Data CustID,FName,LName,Disease,Email,Phone 12345,Xyz,Smit,Bronchitis, Asthma and fever,[email protected],80000000 12346,Abc,Doe,fever Headache,[email
-
Transfer consignment plant to plant 2 steps
Dear Experts, I have the scenario where i need to transfer the consignment stocks from one plant to another in 2 steps. because the plants are far away and every plant have his own storekeeper with his own authorization. i dont want to use 301 becaus
-
Is it possible to put a watermark on all of the pages of the document?
is it possible to put a watermark on all of the pages of the document?