Plugged AE directly into my stereo. Continue to get flashing amber light even after resetting.

My iMac is connected wirelessly to a Linksys router. I can see the AE in wireless connections but I cannot get AE to the green light. What I am missing?

Just saw the info on blinking lights and was able to resolve my problem.

Similar Messages

  • I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

    I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

    I think this is probably a sign that your network could be better than it is.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

  • Hi, I am trying to connect a WD Mybook for Mac to my airport/time machine device.  On the AirPort Utility it listed under Disks at 0 Mb.  I enabled file sharing.  But nothing happens.  If I plug it directly into my MacBook it works fine.  How do I fix it?

    I am trying to connect a WD Mybook for Mac to my airport/time machine device.  On the AirPort Utility it listed under Disks at 0 Mb.  I enabled file sharing.  And also followed all the steps - "secured disk access: with a disk passord", "Airport disk guest access: read and write", "Share disks over WAN". But nothing happens.  If I plug it directly into my MacBook it works fine.  How do I fix it?  Also, its connected via a powered usb hub.

    I assume that you are using  Mac operating system 10.4.11, as your profile indicates.
    The instructions that you referenced are for use with AirPort Utility....not AirPort Admin Utility.
    Suggest that you download and install AirPort Utility 5.4.2 for Mac , which will run on 10.4.11.
    Also noticed that the instructions do not tell you that the hard drive should be formatted in Mac OS Extended (Journaled) to work with the AirPort Extreme, but they should.

  • My brand new Ipad 2 is not charging the battery with py PC thru USB. Is that normal? When I plug it directly into the wall, it works... Thanks! Sam

    My brand new Ipad 2 is not charging the battery with py PC thru USB. Is that normal? When I plug it directly into the wall, it works... Thanks! Sam

    It talks extensively about charging in the user guide, and how USB ports on PCs and older Macs may not provide sufficient power to charge the iPad.  The user guide is available for free from the iBook store (accessed directly via the iPad iBooks app).
    My iPad charges fine when plugged in to the back of my iMac, but I would always prefer to use the mains adaptor to save the strain on my USB circuits (which can wear out if used heavily to power external devices).

  • My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode

    My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.

    Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
    Resolve specific iTunes update and restore errors

  • My iPod touch is disabled and I cannot even get it to work even after I plugged into my computer

    My iPod touch is disabled and I cannot even get it to work even after I plugged into my computer..please help!!!

    Try recovery mode agian.
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
    Place the iPod in recovery mode using one of these programs:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    or
    http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:       
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • I am upgrading wi-fi router from Airport Express to Airport Extreme. I followed set up instructions yet I am still getting the flashing amber light and cannot setup (using manual setup or the continue button).  What should I do??

    Hello,
    I am upgrading my wireless router from an Airport Express to an Airport Extreme.  After disconnecting the Express and plugging the Extreme via ethernet cable to the modem, I am receiving a flashing amber light after connecting the power source.  I also reset the modem while the Extreme was still powered and plugged into the modem, but no luck.  I also tried resetting the modem and the Extreme and still no resolution.  Please advise.  Thank you!

    This error usually occurs when the Windows Firewall and/or anti-virus software blocks the connection attempt from the PC to the AirPort Extreme.
    Microsoft Security Essentials can do the same thing.
    Things would be much easier if you had a Mac or iPhone or iPad to set up the AirPort Extreme. Otherwise try turning off the Windows Firewall and Anti-Virus programs, etc on the PC.
    Restart the PC, then see if the PC can contact the AiPort Extreme. It will likely help to connect an Ethernet cable from the PC to one of the LAN <-> ports on the AirPort Extreme. You can disconnect the Ethernet cable once the AirPort Extreme has been configured.
    Re-enable the Windows Firewall, Anti-Virus, etc and restart the PC.

  • I just bought an AirPort Extreme system over this weekend and I am having problem with setting it up. I plugged the cable as explained in the manual but there is no way I can get a steady green light. I all see is flashing amber light. Can anyone help me,

    I just bought an AirPort Extreme system over this weekend and I am having problem with setting it up. I plugged the cable as explained in the manual but there is no way I can get a steady green light. I all see is flashing amber light. Can anyone help me,

    Think you need to provide some more details about what you are connecting

  • I am constantly getting a pop up box to sign into imessage or facetime and can't get rid of it even after entering password. What can I do?

    I am constantly getting a pop up box to sign into imessage or facetime and can't get rid of it even after entering password. What can I do?

    Launch Safari with the Shift key held down. If that doesn’t work, disconnect the computer from the Internet.
    (116847)

  • I continue to get 'no air printers found' after switching on/off and ink and paper ok. What do I do now?

    I continue to get 'no air printers found' after switching on/off. Ink and paper ok. What should I try next please?

    See requirements for AirPrint and printers that support AirPrint here:
    http://support.apple.com/kb/ht4356
    If your printer supports AirPrint but does not work then:
    Your printer might need a firmware update
    Your printer must be on the same WiFi network
    Your router must support Bonjour (Zero-configuration networking).
    Troubleshooting:
    Turn Off iPad, WiFi router (remove from power), and Printer (remove from power).
    Turn on WiFi router
    Wait 30 seconds
    Turn on printer
    Wait 30 seconds
    Turn on iPad
    Try to print.
    If you need more help then what model printer do you have?

  • Intel mac extreme - no go plugging computer directly into extreme

    I have a 24 inch Mac and yesterday bought an airport extreme. I want the computer to work plugged into the extreme, but when I do this it says that the Mac has a self assigned IP address and can not access the internet.
    I have updated all software and have plugged the computer directly into DSl and it works, but when I do dsl to> extreme to> computer it is no go.
    Any thoughts or suggestions would be helpful. I have not been able to locate this problem onany of the discussion boards.
    thanks

    Todd Janus1 wrote:
    I have a 24 inch Mac and yesterday bought an airport extreme. I want the computer to work plugged into the extreme, but when I do this it says that the Mac has a self assigned IP address and can not access the internet.
    Is the status light on the Extreme green? If you launch AirPort Utility, select the Extreme in the column on the left, and click on "Manual Setup", what do you see for "IP Address" at the bottom of the Summary panel?
    Did you unplug your DSL modem and wait several minutes before reapplying power whenever you switch between connecting the Extreme or your Mac to the modem?

  • Why does my iphone 4s play the first song in the library everytime I unplug it and plug it back into my stereo?

    I did the ios7 update and everything is cool except for this issue. If I choose an album or artist to listen to, and then plug the iphone into my car stereo usb input, it starts at the song that is alphabeticaly first in the library. Is there any way to fix this?

    I had the same issue in my 2012 Nissan Altima.  It was a function in my car's stero settings.  I had to go to the car's iPhone/iPod settings when the iPhone was plugged into the USB.  My settings come up automatically when I plug in and I can scroll through the commands to "Shuffle" songs.  Hope this helps.

  • Cannot get rid of "inbox" even after using other directions for doing so.

    After being cozened into installing "inbox" on my Mac, I could use "inbox" for nothing.
    My Mac runs OS 10.7.5.
    After installation "Inbox" seized first slot on my Firefox (16.0). Even after I thought I had done EVERYTHING to dump "inbox", "inbox" opens unasked.
    Scrupulously following directions, given in the next box, did not work either.
    Holding down the "option" key promised a safe mode restart, but Firefox would not open in safe mode within a more than reasonable time (10 minutes), nor did anything else appear. I gave up twice after choosing to restart in safe mode.
    Seek unambiguous advice that timely allows ridding my computer of all traces of "inbox" without wrecking anything else.

    See also [[/questions/785267]]
    Try to reset the prefs on the <b>about:config</b> page that refer to inbox.
    *Open the <b>about:config</b> page via the location bar and do a search for <i>inbox</i> via the Search bar at the top of the about:config page.<br />
    *Reset all <i>inbox</i> related prefs that appear bold (user set) via the right-click context menu to their default values.
    Try to reset some preferences to the default with the SearchReset extension:
    *https://addons.mozilla.org/firefox/addon/searchreset/
    Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).

  • Why do I continue to receive an "incorrect password" immediately after resetting it?

    Why do I continue to receive an "incorrect password" message immediately after resetting it?

    Be more specific. Do you mean after changing an email password, it says you have an 'Incorrect Password', or something else. My scenario is correct, than it's just the way Apple works.

  • Can I charge my ipod classic in Germany with the same usb wall charger I use in the USA, by plugging it directly into the correct adapter plug? Or do I need a power converter/transformer?

    I will be in Germany for a year. I want to take my ipod classic and charge it with a usb wall charger, like I do here in the USA. Can I simply use the correct wall adapter plug for Germany, or must I use a power converter/transformer in between?

    It should work as long as the prongs adapter are adapted to the outlet configuration.
    From http://manuals.info.apple.com/MANUALS/0/MA188/en_US/iPod_2ndGen_USB_Power_Adapte r-EN.pdf
    Specifications  Input: AC 100-240 volts (V), 50/60 hertz (Hz)  Output: DC 5V, 1 A

Maybe you are looking for

  • Is there a shortcut to center-align all items of a certain type only?

    I know the title of this thread is poorly worded; I apologize. Let me try to explain. I design transit schedules, which I create in InDesign using tables. These schedules list arrival times for bus stops, but when the bus does not stop at a particula

  • Vendor Payment Method for Substitution in Invoice Document

    Hi, I would like to define a substitution to replace Payment Method Supplement(BSEG-UWAZE) if the vendor master defined with payment method is Cheque. I had copied RGGBS000 to ZRGGBS000. Now in ZFGGBS000 FORM Routine, I need to check for the payment

  • Rreading and writing this file's metadata (xmp) has been disabled. Renders unplayable/corrupted files

    Hi everyone, I've been using Premiere Pro CC for a while now, as I have a YouTube channel, and I've rendered, exported and edited around a dozen different videos, and have had no issues until now. I haven't done anything to my settings, but randomly,

  • [HELP] Editing a circular menu

    Hi everyone, flash isn't my area, but maybe someone can help. I have a circular menu that i want to integrate in WebPlus but i don't know how to edit the code on the menu itself because i don't understande AS3 and Flash. When I test the movie and cli

  • How to add search tab in the .chm file

    Hi All, All these days, I was using RH -5 to create the .chm file. Today, I moved onto RH -9. The chm file had the Search option enabled automatically in RH-5. But in RH-9, Glossary option alone is available and I am not able to add Search tab adjace