Plugged in Apple TV, Apple symbol appears the a view of the rear of the box with a USB lead going to an iTunes symbol? Can anyone shed some light on this oh and it doesn't go past this point
Plugged in Apple TV, Apple symbol appears the a view of the rear of the box with a USB lead going to an iTunes symbol? Can anyone shed some light on this oh and it doesn't go past this point
You need to grab a micro usb cable and restore via iTunes
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US
Similar Messages
-
when registering my iphone on itunes the message - the sim card insertedin this iphone does not appear to be supported - can anyone shed some light on this and tell me a way around this problem? the phone itself is an english phone and tried to register with a spanish sim and that message appeard, so i tried with my iphone sim which is english and the same message appeared!
thanksIs the English sim from the original carrier as that is usually the message you get with a carrier locked phone.
-
Woke up to my iPhone 4 being completely blank. I've tried restarting and resetting it as well as charging it and plugging into my computer. Can anyone shed some light as to what may be wrong or how to fix it? Thanks
Hello there, Kyle.Kuz.
The following Knowledge Base article that provides some helpful pointers to help resolve your issue is:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Specifically:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
I am trying to register my Appliances and when I try to click on "Save" or "Submit" I am unable on my MacBook pro. I have tried different browsers yet still same problem. Can anyone shed some light on this please.
Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
Thanks again, Sandra2474. -
Ever since my last update I have been unable to add songs from my i tunes library onto my i phone. The "add to" button does not appear for me when I connect my i phone. Can anyone shed some light on this for me?
Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
Thanks again, Sandra2474. -
So I downloaded acrobat XI Standard from the Adobe website, when I go to install it, it says "Adobe XI Pro" at the top left corner. Can anyone shed some light on this for me? I have a volume license for XI Std. so I would like to use the Std. version.
login and download your software from the adobe volume licensing website, Customer resources | Adobe Buying Programs
-
Can anyone shed some light on the OS X icon "irregularity?"
Had expected icons (Mail, Reminders, Calendar, etc.) would update to those of iOS 7 with the Mavericks update. They did not (for me)! Should I be doing something in order to see the updated icons in Applications and Dock? I noticed the icons changed in iCloud. This obviously is not a major issue just an observation. Can anyone shed some light on the OS X "irregularity?"
When I upgraded to Mavericks... The Calendar and Notes icons were updated also.
After the first reboot... they reverted back to the last generation. -
Hello,
Can anyone please shed some light on how I can run MS Office and Meta Trader 4 platform on mac air. I have been using Play on Mac and Wine for the past couple of weeks, but now suddenly it has stopped working, only crashing and giving me nightmares. Is it juts best to install the latest Windows or Parallel?
Regards JoeMeta Trader 4 is Windows only - Office is available for the Mac and Windows and are mostly compatible but given that you'll be doing online trading you may prefer the Windows version of Excel since there are financial spreadsheets with macros that only run on the Mac with some significant editing.
You can install Windows 7 or 8 in BootCamp or any version of Windows usting virtualization. VMWare and Parallels are commercial programs and VirtualBox is open source. VB may be all you need. Whatever solution you choose, you'll need a commercial version of Windows (or get an OEM disc from NewEgg). -
To say that I am livid would be the greatest understatement EVER made in the ENTIRE history of the planet. Last night my iPhone 5 decided it would go into Recovery Mode. (That is.....a Black screen showing the iTunes logo, a white 'up' arrow and with the white cable/plug at the bottom of the screen).
(Hold onto your Samsung Galaxys people - do NOT throw/give them away when you 'update (yeh right) to an iPhone).
So I turned it off and left it off all of last night. I arrived at work this morning to 'sync/restore' it with my computer where it asked me to install the latest version of 'whatever it is the latest version of.' HOWEVER, as I do not have the administrative rights to do such things on my work computer, I was unable to do so and now I have been riding the 'Apple Merry-Go-Round' since 0630hrs (WAST). It comes up with the following message in a window on the screen:-
'The iPhone "iPhone" could not be restored. An unknown error occurred (14).'
Gee - thanks for that - I'd never have known unless I saw that little window!!!! The fact that my screen has frozen and I am unable to install, sync or restore anything kind of gives it away!!!
'Just go to the nearest Apple Store' I hear you say. That is a 'tad' hard as I work in The Pilbara Region of North West, Western Australia (for 4+ weeks at any one time) and won't be back in 'civilisation' until next Monday week (10th of Feb, 2014)........Talk about being held to ransom by technology!! I have asked other people at work (who ALL have iPhones) and when I showed them the screen (& the whole ridiculous process) they screwed their faces up as they had never seen such a thing. Some people NEVER get asked to update/install anything on their phones.....So, I have to wonder why mine 'asks me'.......constantly.
I fear that my 'Apple' is not an apple but that it is actually a 'Lemon.'
Hey 'Apple' - don't let me get a hold of you!!
Oh yeh - the opening hours actually say Sun 10:00am til 4:00pm or even 6:00pm in some places.......how convenient - when you call (them on their landline FROM a landline) you get the engaged signal!Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
Thanks again, Sandra2474. -
Can anyone shed some light on the bizarre filing system?
Ive been using Iphoto for years and have yet to ask or figure out the file naming system.. for instance under 2002 there are a ton of folders that are named as a number and inside of thise more of the same. I cant figure out WHAT the logic is? Enlighten me..
A Note about the v6 iPhoto Library Folder:
In this folder there are various files, which are the Library itself and some ancillary files. Then you have three folders
Originals are the photos as they were downloaded from your camera or scanner.
(ii) Modified contains edited pics, shots that you have cropped, rotated or changed in any way.
This allows the Photos -> Revert to Original command - very useful if you don't like the changes you've made.
(iii) Data holds the thumbnails the the app needs to show you the photos in the iPhoto Window.
It is strongly advised that you do not move, change or in anyway alter things in the iPhoto Library Folder as this can cause the application to fail and even lead to data loss
There are three ways (at least) to get files from the iPhoto Window.
1. Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. Show File: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
Rolls in the iPhoto Window correspond exactly with the Roll Folders in the Originals Folder in the iPhoto Library Folder. You can move photos between Rolls, you can rename rolls, edit them, create them, as long as you do it via the iPhoto Window. Check out the Info Pane (wee 'i', lower left) the name and date fields are editable. Edit a Roll Name using the Info Pane, the Roll Folder in iPhoto Library Folder/Originals will also have the new name.
Regards
TD
Message was edited by: Terence Devlin -
My gmail email is my apple ID. I found I lost access of gmail last night and I reset the password before bed. But this morning the password was changed again. My ipad also requested a password that didn't match to the one I used. I have reset my gmail once more. In addition, I added 2-step verification. But I have not received any new mail up to now. I tried to reset my apple ID. When I selected sending an email for resetting, the mail was sent but never reached my mailbox; When I selected answering security questions: the birthday was wrong. It's been changed. I am SO SO UPSET. Can any genius take pity on me and show me some guidance, please?
You should get Apple involved in sorting this out. Start at this site:
https://getsupport.apple.com/Issues.action
Your Apple ID can be handled through iTunes. -
I ran the update for 10.7.4 and now my 2011 outlook will not load, I've reloaded the application and it still won't load, any help is so appreciated!
Run all available Office 2011 software updates using Microsoft Auto Update program.
-
Can anyone shed some light on this?
We are having problems running two iPhones. When a setting is changed on one one it changed the other.
Hey I know I'm new, but I'm running 3 iPhones and an iPad all using my one apple id, I've never had any problems with the setting's syncing between them. Why would they need a whole new apple id? Can they not just change the cloud settings on the individual phones so that they don't sync? That's what I did, I sync my phone with my PC and my wife's phone & iPad sync to the cloud for most things. before I made these changes she was getting my calender notifications but everything else was working perfectly and still does.
I personally don't think you need a new apple id, maybe the phones need to be named differently, and cloud settings need to be adjusted to your personal needs.
I like having everything under the same id, since I can purchase apps for all my devices and we share the photo stream between all devices so I get to check out pictures she takes with the kids while i'm at work and vice versa. Also love being able to use findmyiPhone to track her location (and vice versa).
Sorry if I'm stepping on your toes Eric, but I just think that there is a better solution for the OP than creating a whole new apple id. -
I am having trouble with the Jpeg icons and also now thumbnails not being visable in bith teh Apple finder and now also Adobe Bridge. Can anyone shed any light on this ?
Argh - once again, I find my solution right after posting this. Left out one modification to the SWIG script, now it runs in 29 seconds vs C 16 seconds, I can live with that.
-
My backups using Time Machine to my Time Capsule worked fine until a week ago. Since then it gets stuck on "Preparing ...". I have left it preparing overnight and it doesn't get past this stage. What else can I do?
Mavericks does really nasty stuff..
Try manually mounting the sparsebundle and extract the files you want.
Yet another Pondini reference. http://pondini.org/TM/15.html
We have avoided Mavericks you see knowing that it would cause these kinds of issues..
You never ever load a new OS without doing a disk image beforehand.. TM is not reliable enough or trustworthy to be depended on.
If none of the above work..
I would get a USB drive on the computer and install Mountain Lion or whatever OS you had before you unfortunately upgraded to Mavericks.. Then use TM from that decent installation but mount the sparsebundle and choose the backup from a date well before mavericks was installed.
Once you have extracted the files.. or even done a full restore you might be able to extract the files you want.
Maybe you are looking for
-
Adding new field to Master Data
Hi All, I have one master data which is business content. i need to add one custom field in that with the status information of records. that new field will get data from R/3 status table via extractor from CMOD. now this Master data is having delta.
-
View creation not working +timesten
Hi All, i am not able to create view in Timesten with following SQL can any one tell me , do't we have OVER ( PARTITION BY ) clause inTimesten ? thanks , -AK Edited by: tt0008 on Jul 1, 2010 1:19 AM
-
Car with USB input - but music plays from phone sp...
Hi all, Last week I got a new Nokia Lumia 520. I've had iPhones for years, but since getting an iPad, though I'd have a change of phone. Our Nissan Quasquai has a usb input which connects straigh to the head unit. I can plug my iPad straight into tha
-
we want to hide cash discount column in standard "post incoming payment" screen, is it possible by changing screen variant or user exit? I tried, but haven't got it, it seems only document number, Sales order number column can be hide
-
Hi all, I need to run a Z program right after a LSMW. I've tried to insert a "submit ZPROG" in the LSMW "end_of_transaction" step but it doesn't work. Does somebody has an idea if it's possible ? Or, is there any workaround ? Thanks in advance for yo