Plugged laptop into school smartboard ... now everything has gone large and wallpaper has gone?!, Plugged laptop into school smartboard ... now everything has gone large and wallpaper has gone?!
I plugged my personal Macbook into my classroom smartboard OHP today and everything went large and the wallpaper reset to the Macbook standard one. I restarted my comp and its still like this ...
HELP please!!
You need to go into System Preferences... > Display and select the correct resolution. Then go to Desktop & Screen Saver and select a new wallpaper.
Bob
Similar Messages
-
My IPAD has a little box around everything I tap. I have tried to reset the IPAD 2 but to no avail. Now I am locked out and cannot put my passcode into the Ipad2 so I cannot back up the IPAD 2 when plugged in. It is charged ..I was reading a Foot Smart email when this occured. Help
Sounds like you have VoiceOver (one of the accessibility features) 'on'. Try triple-clicking the home button and see if that turns it off, and if it does you can then change what a triple-click does via Settings > General > Accessibility > Accessibility Shortcut (or Triple-Click Home depending upon the iOS version).
If that doesn't turn it off then you can either turn it off directly on the iPad (you need to use a tap-to-select and then double-tap to activate/type process and 3 fingered scrolling) to go into Settings > General > Accessibility and turn VoiceOver 'off', or you can do it by connecting to your computer's iTunes (after typing in your passcode via the tap/double-tap process) : http://support.apple.com/kb/HT4064 -
I plugged my iphone in to my laptop to update it and the computer shut down right at the end. My phone now has the itunes symbol and an arrow asking me to plug my phone into itunes (I assume the laptop). It's frozen like that even when switched off. If I plug the connection into the laptop it's not recognising it now. HELP!
Hello there, xkatiex255.
The following Knowledge Base article should provide the steps for you to resolve your issue:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Hi I tried to install ios7 last night and the ipod touch now has a frozen screen with the itunes logo and the usb logo I plugged the ipod into my laptop and tried to restore only to be met with the message 3194 error cannot restore this ipod please help thanks
Hi. The two user tips both describe a sequence of steps that should get your library from the point where it threatens to wipe data from your device to where it is syncing normally, while recovering as much information as possible. It may still be necessary to wipe and reload the device but this should only take place once all the data that can be recovered has been recovered.
Doing step 1 of 8 and then complaining things aren't the way you want them to be yet strikes me as premature...
Since you appear to have all your media content, and we are discussing an iPod classic, not an iOS device, the main worries are already taken care of. What's left is ratings, playcounts, playlist membership and checked status. Since your device holds only part of your library at best you could only recover the missing data for the content that is on the device using third party tools.
Recreating the previous checked/unchecked status of every track in your library from where you are now may not be that easy. Syncing with selected playlists has many advantages, one of which would have been that you would have a named playlist that could have been retrieved by 3rd party software if you had used this method.
You haven't explained what caused your problem in the first place, but if you have a Previous iTunes Libraries folder holding old copies of your iTunes database (generated with each iTunes update) then it would be possible to restore the most recent of these and then update the library with any changes in your media folder.
BTW Apple doesn't offer free support for this kind of issue with iTunes.
tt2 -
my iphone 5 randomly shut off and when I plugged it into my laptop, it says it is in recovery mode. however, i keep getting error 9 when it's attempting to restore. my phone has been off for 24 hours now and i can't get it to successfully restore
Hey p0507!
Here is an article that addresses your error message, and can help you troubleshoot this issue:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Configure your security software
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
Common errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Thanks for using the Apple Support Communities!
Cheers,
Braden -
My 5C has just done the most recent update, yet I can't turn it on without it being plugged into iTunes through a laptop. However, I don't have iTunes on my laptop because it's my school one. Ideas please?
If you are seeing the USB cord and iTunes icons on your screen something has gone wrong with the update. You will have to restore your iPhone. The only way to do this is to connect the phone to your computer that is running iTunes.
-
I am updating my phone to the newest IOS and it has been doing it for hours. I have now plugged it into the computer and it says that it is in recover mode and I should restore it? What does that mean? Do I lose everything on my phone? Is there anything else I can do?
Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.
-
I plugged in my husbands iphone to my laptop and synced it to mine. I used my own apple ID. Big mistake. Now he has my name, email address,contacts etc on his phone and lost his... how do I correct this?
You'll have to set up his mail account again. To change the name, follow this article: iTunes: How to rename your device
After that right click on it in the device list and choose backup. A manual backup will be made, no sync process is included. When the backup is finished you should find it listed in iTunes/Edit/Preferences/Devices
Message was edited by: Ingo2711 -
i was on facetime and phone was working perfectly normal. I plugged it in and left it for 5 minutes before going on it again, as i went to unlock it the screen was a dark blue colour and was receiving text messages but the screen was still this dark blue colour. i have since left it for an hour and restarted it multiple times but the screen is still the same. Ive plugged it into my mac to try and reset the whole phone but isn't letting me as i cannot type the password in. I'm just very confused as to how one minute it was working perfectly and now it isn't working at all. It hasn't been dropped.
Hi lydiablackburn,
I see that you are experiencing an issue with the screen of your iPhone. Here is an article for you with some information about addressing this issue:
Get help with the screen on your iPhone, iPad, or iPod touch - Apple Support
https://support.apple.com/en-ca/HT203039
Thanks for using the Apple Support Communities!
Cheers,
Braden -
I plugged my phone into my Mac which i have never synced before and it restored ALL of my old things from my old phone. is there a way to undo everything?
iPods do not work with "accounts." They work with your iTunes library. You don't have to set up a new iTunes library for each iPod. One iTunes library can sync with as many iPods, iPhones, and iPads as your own, at the same time. iTunes connects to and treats each device separately.
However, if your iPod nano is set up for automatic syncing with an iTunes library that is NOT your current iTunes library, you cannot sync your current library to it without replacing its existing content. Do you have access to the previous iTunes library, the one the iPod currently synced to? If so, you should transfer your song files from that iTunes library to your current iTunes library. Then, sync our iPod to your current iTunes library. You can post back to get more info about the procedure.
If you don't have access to that previous iTunes library, the approach is to first offload the song files from the iPod to your computer's drive, then add the song files to your current iTunes library.
You cannot use iTunes to transfer song files from iPod to computer, except for songs purchased from the iTunes Store. However, there are third-party methods and utilities that can transfer from iPod to computer. If you do a Google search on something like "ipod transfer," you should get some links.
You can then sync your iPod to your "consolidated" iTunes library. -
Hi, This is the first Apple product I've ever owned and could really use anyone's help. Please do not be blunt and to the point, I need lots of detail and some steps in order to understand what I need to do Thank you!
if you want to add songs they must be checked, put them in asong list as it makes them easier to manage
-
Ive synced and backed up my iPod onto my old laptop which has now broken, how can i sync and bakc it up onto a new computer without everything being wiped?
you will have to plug it into your new computer and connect it to itunes, then hit the backup button it should start backing up. THERE YOU GO! HOPE IT HELPED! please hit the "this solved my question" button
-
MY I4S PHONE CUTS OFF IN THE MIDDLE OF DAY FOR NO REASON. IT WILL NOT TURN BACK ON UNTILL I PLUG THE USB INTO THE COMPUTER. THEN IT HAS "SEARCHING " AT THE TOP LEFT PART OF THE SCREEN. BATTERY IS 64% RIGHT NOW. IT DID THE SAME THING YESTERDAY SO I DOWNLOADED THE IOS61.1 AND IT SAYS IPHONE SOFTWARE IS UP TO DATE. ANY IDEAS
Nothing happened, i managed to get my computer to recognise it and now restoring... but it says 3 hours remaining?! Will i lose everything?
-
My ipad has been disabled and now I'm trying to get it to work again. However, when I plug it into my computer it says that i need to type in the passcode, but i can't until it connects to itunes...also, my ipad has only been plugged into my friend's computer. it has never been plugged into a computer since then. Would this have anything to do with my problem?
This probably has nothing to do with plugging into your friends computer, but unless you have a backup, everything on the iPad will be lost.
You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
You will probably have to use recovery mode
http://support.apple.com/kb/ht4097
You can download purchased content again from the various stores as long as you use the same Apple ID, as long as the content is available in the stores, and as long as the content is available where you live. -
hi there, I need help .. I have 2 gen ipod touch and I restore my ipod around 11:00 pm and now its 1:20 am and on my screen its the iTunes logo and the usb cord and when I plug my charger in my laptop .. iTunes comes up and this what it saids "iTunes has detected an ipod recovery mode. you must restore this ipod before it can be used with iTunes" so what do I do.. do I let my ipod died right out & then try it .. because I restore it ,... it was beening to slow... so please help me ?
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Does anyone else have a yellow tinted screen on there ip4
I bought the iphone 4 3 weeks ago i had it switched out 3 times and my screen still has a yellowish tint to it compared to everyone else i know that has an iphone theres is clear and bright white. Anyone else having this issue?
-
Activating New GL & Doc Splitting
Hi Can anyone suggest me a solution: We are working in ECC 6.0, New GL & Doc Splitting is not acvtivated. We are already in Production, can I activate it now, if not what is the procedure. We are just 3 months after live. SAP suggests a migration pro
-
I have tidied up some email campaigns by archiving them, but now find I can't access the analytics for them. Is there a way of doing this, or do I need to log a support ticket to get this undone? thanks Ursh
-
Import iMovie Project containing map animations
How can i import my iMovie projects without losing map animations? Is there an addon, plugin or something like that?
-
CS3 and printing to an Epson 7800 (Mac OS10.5)
I have an Epson 7800 printer. With Photoshop CS3 not all the print setting choices are available(after hitting "Print" from the first, new Print Dialog window). I get the new Print Dialog window, but when I hit Print and then try and choose Print Set