Plugin and https - problems

Hy,
i tried to load an applet via https from server.
without https applet starts working correctly.
with https following printout in plugin 1.4.1 - console is done and I
dont know were to search the problem for.
it seems not to be my code - because there is no package of my used
packages written out.
I hope that anyone can help me. problem is not iexplorer-specific
netscape is same behaviour.
Java(TM) Plug-in: Version 1.4.0_01
Verwendung der JRE-Version 1.4.0_01 Java HotSpot(TM) Client VM
java.lang.ExceptionInInitializerError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at java.net.URL.getURLStreamHandler(Unknown Source)
at java.net.URL.<init>(Unknown Source)
at java.net.URL.<init>(Unknown Source)
at java.net.URL.<init>(Unknown Source)
at sun.plugin.AppletViewer.getDocumentBase(Unknown Source)
at sun.plugin.AppletViewer.getCodeBase(Unknown Source)
at sun.plugin.AppletViewer.appletInit(Unknown Source)
at sun.plugin.viewer.LifeCycleManager.initAppletPanel(Unknown Source)
at sun.plugin.viewer.IExplorerPluginObject$Initer.run(Unknown Source)
Caused by: java.lang.NullPointerException
at java.security.MessageDigest.update(Unknown Source)
at sun.plugin.security.WSecureRandom.<init>(Unknown Source)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native
Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown
Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown
Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at java.lang.Class.newInstance0(Unknown Source)
at java.lang.Class.newInstance(Unknown Source)
at java.security.Security.doGetImpl(Unknown Source)
at java.security.Security.doGetImpl(Unknown Source)
at java.security.Security.getImpl(Unknown Source)
at java.security.SecureRandom.getInstance(Unknown Source)
at java.security.SecureRandom.<init>(Unknown Source)
at sun.plugin.services.WIExplorerBrowserService.getSecureRandom(Unknown
Source)
at sun.plugin.net.protocol.https.Handler$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.plugin.net.protocol.https.Handler.<clinit>(Unknown Source)
... 11 more
java.lang.NoClassDefFoundError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at java.net.URL.getURLStreamHandler(Unknown Source)
at java.net.URL.<init>(Unknown Source)
at java.net.URL.<init>(Unknown Source)
at sun.plugin.AppletViewer.getCodeBase(Unknown Source)
at sun.plugin.AppletViewer.appletInit(Unknown Source)
at sun.plugin.viewer.LifeCycleManager.initAppletPanel(Unknown Source)
at sun.plugin.viewer.IExplorerPluginObject$Initer.run(Unknown Source)

Getting the exact same error when trying to instantiate an applet over https with IE6, using 1.4.1_03, anyone got round this???
load: class xms.EntryApplet.class not found.
java.lang.ClassNotFoundException: xms.EntryApplet.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 11 more

Similar Messages

Bea JSP workshop plugin- and MyEclipse - problems

I have been using Bea workshop studio eclipse plugin ( JSP part) with MyEclipse. Bea JSP workshop( with Struts) is a very good product-- better than My Eclipse JSP's .
I had been using MyEclipse (Build id: 20060810-5.0.1-GA windows )with BEA JSP workshop version 3.2.1 with no problems. This combination works well.
I reinstalled the latest versions of eclipse/myeclipse/BEA workshop for struts
and now things are not working well.
Right clicking on the navigator and package explorer in the different perspectives ( JAVA, MyEclipse, BEA workshop studio does not always work
To reproduce the problem install Eclipse 3.2 then MyEclispe version 20061111-5.1.0-GA , then BEA JSP workshop studio - trial version 3.3 . Try and right click on an item in the navigator and package explorer -- change to different perspectives --JAVA, MYEclipse , BEA Workshop for Struts and try to right click again.
THen uninstall BEA Workshop . The problem goes away.
Hank

FYI
I received this reply from MyEclipse:
"MyEclipse uses the patched WTP. You have installed WTP that has been included in BEA Workshop.
The easiest way to solve this issue is to disable BEA's WTP. MyEclipse's WTP is compatible with BEA Workshop."
I updated to eclipse 3.2.1 and disabled BEA's WTP and everything seems to be working OK.

EPCF and https problem...

I have a problem with the EPCF. I have a page with the iViews: header, main view and footer. Some times, when the main view changes, the header changes too. And there is the problem:
- When I use it and open the Portal in http session, everything run ok!!!
- However, when I open the Portal in https session, the main view disappears (or minimize).
Can anybody help me? Does anybody know if I can use EPCF with https session?
Thanks in advance

I have a problem with the EPCF. I have a page with the iViews: header, main view and footer. Some times, when the main view changes, the header changes too. And there is the problem:
- When I use it and open the Portal in http session, everything run ok!!!
- However, when I open the Portal in https session, the main view disappears (or minimize).
Can anybody help me? Does anybody know if I can use EPCF with https session?
Thanks in advance

SA520W - ProtectLink and https problems

Hello Everybody,
We have a SA520W (firmware : 2.1.71) which works perfectly, and we've installed ProtectLink Web licence last week.
When we use URL filtering on port 80 there are no problem. URLs which are indicated in the section "Blocked URLs" are not accessible and URLs which are indicated in the section "Approved URLs" are accessible.
But, and this is the problem, when I use URL filtering on ports 80 and 443 (https), all https addresses are blocked. There are aparently no way to allow some URLs when port 443 is filtered. in fact none of the URLs indicated in the section "Approved URLs" works.
Is there a way to fix this ?
Thanks in advance for your help.
Florian.

Good afternoon,
Thanks for using our forum
Hi Florian, my name is Haider and I am part of the Small Business Support Community. I tried to replicate your network and discovered that there is two ways to manage URL filtering. One is through the ProtectLink tab and the other is through the Firewall tab of the GUI. I would like to suggest to make sure that these two are not in conflict with each other. Since you have the ProtectLink license, I would recommend using that. I would reset the settings for the Content Filtering under the Firewall tab if they are meant to do the same thing. I hope you find this information useful.
Greetings,
Haider Ali Malhi
Small Business Content Developer

DeployJava.js and HTTPS Problem

I'm using the following code for my applet:
<script src="https://www.java.com/js/deployJava.js" type="text/javascript"></script>
<script type="text/javascript">
var attributes = {
    codebase:'.',
    code:'com.myclass.class',
    archive:'/applets/myprogram.jar',
    width:715,
    height:340};
var parameters = {
    java_arguments:'-Djnlp.packEnabled=true',
    locale:'en_US',
    systemVersion:'${settings.systemVersion}',
var version = '1.6';
deployJava.runApplet(attributes, parameters, version);
</script>The applet is hosted on https://mysite.com/myfile.jsf, when a user that has never had Java installed on his machine goes to my applet page it takes him to the Sun Java download page. After wards the user is taken to:
http://https//mysite.com/myfile.jsf
This is obviously an invalid link and instead should go back to the original URL. This does not happen and works correctly if the server is using http instead of https. Any ideas on how this can be fixed?

Apparently no one has reported this is a bug on the bug parade. I did that, for what it's worth. I am shocked that this has been allowed to remain open for two years.

Certificate and HTTPS problem

Please see my forum post:
http://forum.java.sun.com/thread.jspa?threadID=702914&tstart=0
Especially at the end of the post....
I used these two sites in getting to the stage that I am at as explained in the forum post in the link above:
http://143.129.203.3/s/sitter/sl2nap/javaSSLprogr.htm
http://www.somacon.com/p41.php

Any ideas anyone, I will gladly provide more information to clarify the problem further if needed. Any help would be most appreciated.
Kind Regards,
Harry

Can't get rid of ads by Browse to Save and I've disabled all plugins and add-ons

In Firefox, on my FaceBook page and yahoo mail, there are Browse to Save ads everywhere! They are driving me insane. I disabled all add-onos and plugins and the problem remains. I clicked on on the ad and went to browse to save's site where they say they tell you how to uninstall it, but there is no way to uninstall it because it doesn't show up in plugins or add-ons. Help!

'browse to save' goes by a few names apparently-
mine called itself Vaudix (uninstalled it and problem is gone)
other names include Yontoo apparently
hope that helps- my first and only ? post!

I've checked my current plugins and it still shows Adobe Acrobat Version 7 for Netscape (7.0.9.50) I tried to do the update but I got an error - "Please tell Microsoft about this problem" "Send Error Report/ Don't Send".

I've checked my current plugins and it still shows Adobe Acrobat Version 7 for Netscape (7.0.9.50)
I tried to do the update but I get the same error each time - "Please tell Microsoft about this problem" "Send Error Report/ Don't Send".
Also, do I need to Disable or Uninstall the Extension: "SEO For Firefox 3.3.4 as this was highlighted?
== This happened ==
Every time Firefox opened
== When I try to do the update

http://www.microsoft.com/mac/support
http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

I have a macbook pro running snow leopard. Just recently I cannot view youtube videos and other online videos. I recently updated my flashplayer plugin and I believe that is the problem. Is the latest flashplayer plugin compatible with 10.6.8?

I have a macbook pro running snow leopard. Just recently I cannot view youtube videos and other online videos. I recently updated my flashplayer plugin and I believe that is the problem. Is the latest flashplayer plugin compatible with 10.6.8? If this is so, I need to find an older flash player plugin to reinstall. I do not want to upgrade from 10.6.8 at this time because I have 18 yrs. worth of financial records on Quicken that I have read will not work with Lion and I've read bad things about running music programs on Maverick.

rayvonr wrote:
...I have 18 yrs. worth of financial records on Quicken that I have read will not work with Lion and I've read bad things about running music programs on Maverick.
1) Quicken 2007 for Intel (Snow Leopard, Lion, Mt. Lion and Mavericks) is a full featured app that can be downloaded from Intuit for $15 and will work with your data file if you are using Quicken 2005, 2006 or 2007 (if you version is earlier, let me know for more instructions on easy conversion):
http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
2) Partition your hard drive, or add an external hard drive and install Mavericks there and "dual-boot" to operate your music programs in Snow Leopard and experiment with them in Mavericks.
DO NOT install Mavericks over Snow Leopard!

Hello! I'm using Aperture with Efex plugins and notice, what when I saving result in plugin and go back to aperture, preview mode is going to grey color and not working until I reboot Aperture. Did you saw this problem?

Hello! I'm using Aperture with Efex plugins and notice, what when I saving result in plugin and go back to aperture, preview mode is going to grey color and not working until I reboot Aperture. What is intresting - in full screen mode everything works fine. Did you saw this problem?

It seems there's a workaround here:
https://discussions.apple.com/thread/5566037?tstart=0

Is there a known problem with Nik Software Plugins and PSE10

I replaced my PC with a new 64-bit Windows 7 workstation. Have used PSE10 for a while for my cataloging and editing and I did 'trial' individual Nik Software plugins on my old Vista PC for a while. I decided to purchase the Nik Software collection and also to take the plunge and go to Lightroom 4 as well. I put PSE10 on my new PC as well because I want to consider how I might modify my workflow to use both in conjunction (perhaps LR4 for cataloging and PSE10 for editing)
When it came to installing Nik Software Plugins (they are supposed to plugin to Elements and LR4) it seemed to find some of the plugins compatible with both PSE10 and LR4 , some compatible with one of them and some not compatable (apparently) with either, but installed them anyway. But when I use PSE10 now I cannot go from the Organizer into the Editor, it loads the editor interface but not the image. If you open PSE Editor directly and open an image, the image will load and you see 4 of the plugins and I invoke them but the changes dont seem to get applied in PSE10. Then I started reading up on the web ..... and the consensus seems to be it is not a Nik Software issue but an Abobe editor plugin issue.
On a side issue, the retailer I bought Nik Software from sent me no product keys (they sent me Apple Aperture keys) - now they are about to replace my delivery with a fresh issue and proper keys ... but if I run into the same problems again, I dont know what to do. This leads me to looking for some definitive advice from those in the know!
Should I forget about buying Nik Software plugins altogether?
I see a download is available for LR4-2 .. does anyone know if this fixes Nik Plugin issues there?
I am minded to go the route of using LR4 as my cataloging preference but to call PSE10 Editor for editing and have all my plugins operate out of PSE10, but I could not get the plugins to work with PSE10 as mentioned. How does one get them to work?
Is there some workaround or special "way" or "order" to install things ???
I'm still waiting days for some support from Nik Software ... but they are just going to say there is nothing wrong with their product (and the web seems to concur)
Any help would be appreciated on the PSE10 Issue.

17/10/2012. I installed the update - Lightroom 4.2
It keeps the same product key and found the catalog and the Windows Control Panel only seems V4.2 so the original has been replaced with this upgrade.
This would be the first time I put down Lightroom with Photoshop Elements V.10 already there on the system and I suspect this might have helped with better integration between the 2 products.
I made sure I then opened Photoshop Elements V10 and I could edit an image (that the Organizer invocation to Photoshop Elements Editor did sucessfully load the image) and I could use existing plugins like Topaz and Noiseware. Also I made sure Lightroom 4.2 could use "Edit with Photoshop Elements " and it did.
The supplier who had sent me the wrong Nik Software product keys, sent me a corrected version with product keys for Lightroom
Several web articles I read on Nik Software plugins may be misleading (for example there is one on DPReview) which state that Nik Software plugins are compatable with Photoshop (the main product) but are NOT compatable with Photoshop Elements v10. I can tell anyone who uses Photoshop Elements 10 that they ARE compatable with Photoshop Elements 10, but it can be a little tricky to get them going.
This is how I sucessfully managed to get the Nik Software Plug-ins
working (finally) on both Lightroom and Photoshop Elements v10 at the same time
Remember my scenario ... I am putting together a new 64 bit Windows 7 PC and I want to be able to continue to use my Photoshop Elements v10 and also to delve into Lightroom for the first time. I had read all the blurb on Nik Software and it said the plugins were compatable with both and I had downloaded and tested some of them on an old PC anyway, so I knew the principle of installation and operation.
I had just bought the Nik SOftware Complete Collection in September 2012.
The box and the CD they come with .... this is where one of the problems is. Let me explain...
Step 1:
=======
Some of the components on the CD are up to date .. and when you elect to install them the sofware tells you that it has found both Lightroom 4.2 and Photoshop Elements V10 and it installs the plugins no problem and they work. Make sure (in these cases) you take their defaults as to the locations the plugins are instlled to. Typically the dual install works for the following components
Nik Color Efex Prov V4
Nik Silver Efex V2
and the plugins go to
for Photoshop Elements v10 C:\Program Files (x86)\Adobe\Photoshop Elements 10\Plug-Ins\
for Lightroom 4 C:\users\xxxx\AppData\Roaming\Adobe\Lightroom\External Editor Presets\
After each of the above 2 installs finished I invoked Photoshop Elements v10 first and opened an image in Editor and made sure the plugin was working and inserted my product key and activated it over the web. I then made sure it was also working in Lightroom 4.2 - it was!
Step 2:
=======
When it came to installing the Sharpener 3 component off the vendor's CD, it displayed NEITHER of the two applications on its compatability list at all. And there was no "+" sign where one can add one manually. Furthermore if you continue with setup.exe it crashes. I closed the EXE and confirmed there was no plugin in Photoshop Elements v10 as expected for Sharpener.
But when I went into Lightroom 4.2 it shows me the 2 Sharpener entities (the RAW and Output one). And I used it and proved the plugins were working through Lightroom 4.2 and I inserted my product key for it when invoking it for the first time via Lightroom 4.2 as well.
Then I went onto the Nik Software download site and downloaded a more updated version which was Sharpener Version 3.01. When I ran the installer from this download it actually does see and show both Photoshop Elements v10 and Lightroom 4.2 as "compatable" and it installed the plugins from that .. and they both work ... even though I had it working already (seemingly) from the CD install I obviously installed over it and the plugin still works in Lightroom 4.2. It also works now in Photoshop Elements v10. Only issue I had here was I had to re-insert my product key and activate it when I used the plugin via Photoshop Elements v10 for the first time... but if that is the extent of a techincal difficulty - I would take it anytime!.
Step 3:
=======
When it came to installing Viveza 2 off the CD, it only saw Lightroom 4.2 as compatable. I did something similar in this case. I let it install to Lightroom 4.2 as a plugin and proved it worked and activated its produvt key. Then I downloaded V2.009 off the website. I re-installed from it (over the Lightroom 4.2 one obvously again) and it now also sees Photoshop Elements 10 as compatable and installs correctly. Strangely enough I did not have to enter my product key a second time when I went to invoke the plugins via Photoshop Elements v10 in this case. What the hell! - the subtleties of software!
Step 4:
=======
Dfine 2.0 - the setup for the CD again finds NEITHER of the 2 applications on its compatablity list, but it put it into Lightroom 4.2 anyway (like the Sharpener component behaved) and I proved it worked. Then I downloaded version 2.112 from the Nik Software website and it finds both applications compatable. Also I did have to re-enter my product key when first invoking the plugin via the Photoshop Elements v10 editor (like as in the case of Sharpener)
Step 5:
=======
HDR Efex Pro (which comes on the vendors CD with a promise to a free upgrade to HDR Efex Pro 2) .... the setup.exe sees Lightroom 4.2 as compatable but does not see Photoshop Elements v10. Be careful ... this component is NOT A PLUGIN ... to see and use it in Lightroom 4 you must select photos and then do menu option EXPORT WITH PRESET HDR EFEX PRO. It does not work as a plugin within Photoshop Elements (any version) . I obtained my free upgrade too and it works from Lightroom. Dont even try to configure it manually as a plugin for Elements. Instead if you save files as JPG or TIFF you can open the EXE directly in the Program Files area (if you have 64 bit make sure to open that EXE not the 32 bit one) and you can use it in standalone mode. There is only one menu option within HDr Efex Pro when using it this way ... File-Open.
So to conclude ... (leaving HDR Efex aside because we know it will not plugin to Elements) ... I have them all working in both Lightroom and Elements. As I begin to learn Lightroom and move away from Elements for cataloging and edits, I know I can invoke most of my workflow plugins from both products. People say I should persist in Lightroom, but if for some reason I dont, I have the fall back position of having everything working out of Elements 10 anyway. It's been a bit of chore getting to this point, but others might find my workaround useful.

Firefox frequently 'not responding' having auto-installed version 10 yesterday. No previous problems. Have disabled all plugins and uninstalled and then re-installed Firefox several times today. Problem persists. Can anyone help please?

Firefox frequently 'not responding' having auto-installed version 10 yesterday. No previous problems. Have disabled all plugins and uninstalled and then re-installed Firefox several times today. Problem persists making continued use of this browser very unlikely unless a quick solution is found! Can anyone help please?

Perform the suggestions mentioned in the following articles:
* [[Firefox is already running but is not responding]]
* [[Firefox hangs]]
Check and tell if its working.

OPMN and HTTP server problem

Hi all,
I'm trying to install Application Server Infrastructure on RHEL 3, I Managed the connect the OID with database repository on another server..
But the installation failed at OPMN configuration assistant-start HTTP server!
I continued the installation anyway and used configToolCommands to configure the rest of the required tool, so now every thing is configured well exept for the (OPMN configuration assistant-start HTTP server)
in the installation log file, this was what I found:
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=14674)
failed to start a managed process after the maximum retry limit
Log:
/u01/app/oracle/product/9.0.4/IMHome/opmn/logs/HTTP_Server~1
Invalid Exit Code. The following result code will be used for configuration assistants: 1
Configuration assistant "OPMN Configuration Assistant - start HTTP Server" failed
So..Any idea what could be the problem? and how can I solve it?
Plz,reply as soon as you can, it's urgent..
Thx.
Asma

try this...there might be a port conflict with webcache and Http.
if you do not need webcache..stop it and start http.
opmnctl stopproc ias-component=Webc{C}ahe
opmnctl startproc ias-component=HTTP_Server
i am positive it will be port conflict. try running your http in a different port.

I have Firefox 3.6.9 and have problems with audiostreaming. I have downloaded Mediaplayer plugin with no success. I get a black screen with (audio/x-mpegurl object) any help?

I tried audio streaming. Even after installing the plugin for media player no success. Any suggestions for Media player, winamp or VLC?

Hi, I was extra busy today and then my email went to the next page, I think and then missed your post. Ok, so we have these add ons in FF. Well as you know the 3.6.9 just came out and is new, but I'm sure you were having issues before that, right?
Since Adobe has the Shockwave Player and the Flash Player, which are very different programs and I know they are confusing, but we need to keep the terms separate or we'll get them mixed up:-)
The Flash Player has the Shockwave Flash Object in the IE add ons and is vs 10.1.82.76 and must be Enabled.
In the Firefox browser it has the Shockwave Flash vs 10.1.82.76 plugin and it must be Enabled.
The Shockwave Player has the Shockwave ActiveX Control in the IE add ons and the latest version is 11.5.8.612 and it must be Enabled. I'm sure the Firefox browser has the plugin and it would be vs 11.5.8.612(latest version) and it must be Enabled.
These add ons are both in manage add ons under "Show" in "All Add Ons" for IE. For Firefox they would be in the plugins.
Since we are dealing with Flash Player, and for this discussion we need not be concerned about Shockwave Player, nor Shockwave Director.
Right now I need to know what operating system you use, is it a 64bit and what version of IE you have.
Go to this test site and test with each browser and let me know if you can see the animation and what version is listed .
http://www.adobe.com/software/flash/about/
Please understand I can't troubleshoot the PC with IE & FF and the HTC at the same time:-) Since you said IE is working, we'll see about FF.
Thanks,
eidnolb

All plugins and addons disabled but still have Flash Problem, ?

What can I do next?
I have Windows 7 64bit, FireFox 13.0.1 All Plugins and Addons are disabled. I downloaded the latest Flash which states it installed correctly, but it did not show the spinning Adobe box at the start, and no Flash pages work. Everything is ok in Explorer.

If you can't get Flash 11.3 to work then you can try to revert to Flash 11.2.
You can download the Flash 11.2 player via this direct link:
*http://fpdownload.macromedia.com/pub/flashplayer/current/licensing/win/install_flash_player_11_plugin_32bit.exe
*http://forums.adobe.com/thread/1022066
You need to uninstall the Flash 11.3 version if you downgrade Flash.
*http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html

Plugin and https - problems

Similar Messages

Maybe you are looking for