Plugin is not working with Mac 10.6 {64 bit intel machine}

Hi,
I have tried to extend the AutomationFilter sample plugin. Earlier there was problem that the plugin name was not showing. Now it is showing, but when I click on it I am getting the following error
"Could not complete the AutomationFilter command because there is not enough memory (RAM)."
I have gone through the documentation which describes the plugin setting for 64 bit mode. And made the following changes in the pipl resource.
Any suggestion for fixing this problem will be greatly appreciated!
Thanks

I would like to add the some more to the prb..
when i am building the sample with Base SDK +i386 and debugging the sample from xcode then it's being load and working fine.The reason what i found is while debugging the photoshop is loaded in x32 bit which comes on the splash screen. But when I am directly running the photoshop application then the plugin did not gets loaded also the photoshop splash screen show it is loading in x64 mode.
In all other cases as
Base SDk + x86-64
10.5 /10.6 SDK + x86-64
when I am running the application I am getting error as not enough RAM for executing this command.
What I can do this fix it.
Thanks!

Similar Messages

Tried to download version 4, which replaced old 3.6, but I'm getting a message that version 4 will not work with Mac OS 10 (I have OS 10.4.11). How can I download previous Firefox version?

Tried to download version 4, which replaced old 3.6, but I'm getting a message that version 4 will not work with Mac OS 10 (I have OS 10.4.11). How can I download previous Firefox version?

You can download firefox 3.6.16 here: http://www.mozilla.com/en-US/firefox/all-older.html

In context not working with Mac Safari 6.04

Hi there just noticed
in context not working with Mac Safari 6.04, you can edit text, and save and publish but editable marquees are no longer visible especially the repeating elements?

Hi Vicki,
I would suggest submitting a support case on this for further investigation.
Unfortunately I'm on a PC machine so I cannot confirm on my end. Please reach out to direct support ASAP if the issue is still existing.
- http://helpx.adobe.com/contact.html
Kind regards,
-Sidney

Lost ical and the ical 1.5.5 is not working with mac osx 10.5 ?

lost ical, would like to download it, as in the installation disk, I'vent the possibility to do it . The problem is that the ical 1.5.5 is not working with mac osx 10.5 ?

biomecasport,
Welcome to Apple Discussions.
1. Insert the Leopard Installation disk into the computer.
2. The disk will appear on the desktop.
3. Double click on the "Optional Installs" folder.
4. Double click on the "Optional Installs.mpkg."
5. Click on (Continue) in Introduction.
6. Click on (Continue) in Software License Agreement.
7. Click on (Agree) to agree to the terms of the software license agreement.
8. Click on the disclosure arrow ▶ next to Applications.
9. Select (✓) iCal.
10. Click (Continue).
11. After iCal has been reinstalled, download and install the Mac OS X 10.5.8 Combo Update to bring iCal up to the most recent version.

Why does my printer HP 3080 not work with Mac OS X VERSION 10.7.5

Why does my printer HP 3080 not work with Mac OS X VERSION 10.7.5. Am I missing a driver? If so where do I go to download it? thanks

What's the full model number and name of the printer? I can't seem to find any HP printer with the numbers 3080 in the model number.
How are you connecting the printer to the Mac?
I am a printer tech for HP.

USB superdrive not working with Mac Pro

Is there a trick to getting a USB Superdrive working with a Macpro?
The drive in the Macpro no longer ejects and have tried connecting the USB drive to both the front and back ports - does it not work with Mac Pros?
Any pointers in the right direction would be much appreciated.

I had a problem my superdrive. It would play dvd's and cd's that were already burnt but would not burn blank DVDs or CDs- in the recent past it had no problems burning. In addition, the Finder would not display the superdrive. When I put a blank disc in it would go to Disk Utilities and would not allow burning. With help from Apple I discovered the problem-- The settings in CDS & DVDs had been changed from When you insert a blank DVD/CD "Ask what to do to to "GO to Disk Utilities". If this sounds like your problem try changing the settings to this:
Try going to; System Preferences/ CDs & DVDs
Change these two settings to this:
When you insert a blank CD: Ask what to do
When you insert a blank DVD: Ask what to do
NOTE: If they are already set to this you probably have a different problem. If they are set to Go to Disk Utilitiy this is probably a solution.
And
Then go to Finder Preferences
Make sure that under "Show these items on desktop:" that the checkbox for CDs, DVDs, and iPods is checked.
Try to burn the DVD again (reload Disc- perhaps restart) and try again.
Don't know how these setting changed but they did. It worked for me.
Message was edited by: pj176

How do I shut off the plug in. I using mac OS10.4.11 and I keep getting a bar to update my plugin. The plugin will not work with os10.4.11. Everytime I go to a

every time I go to a new site a bar is lowered and ask to update my plugin. I am using mac 10.4.11 G4 The new plugin will not work. How do I shut off the plugin update so I don't get this anoying bar ever time I go to a new web page. If there is no way to shut it off, I'll trash Firefox and go back to Safari. This just started and I'm tired of it.

to turn off the messages about outdated plugins, enter "about:config" into the address bar of the browser, confirm the info dialog, then search for the preference named "plugins.hide_infobar_for_outdated_plugin" & double-click it in order to toggle it to "true".
please also note that firefox 3.6.28 was the last build that ran on a powerpc, however if you want to use an up-to-date browser based on firefox you can switch to "tenfourfox" - the downside is it doesn't support plugins at all
[[Firefox no longer works with Mac OS X 10.4 or PowerPC processors]]

Why is wordpress wp-cycle plugin is not working with firefox 4?

wordpress wp-cycle plugin is not rotating with firefox 4 but does work with 3.6.10 and it works in Safari and IE. It just shows the first image but does not rotate to the others. This happens on both the mac operating system and Windows. Will there be a fix for this?

For me the solution given here worked on my Thinkpad T42 WinXP:
http://aslezak.com/thinkpad-trackpoint-scrolling-in-firefox
Open this file in Notepad:
C:\Program Files\Synaptics\SynTP\tp4table.dat
Find this line:
; Pass 1 rules (These rules run last)
Add the following lines above that:
; Firefox
*,*,firefox.exe,*,*,*,WheelStd,0,9
*,*,firefox.exe,*,*,MozillaWindowClass,WheelStd,0,9
*,*,firefox.exe,*,*,MozillaDropShadowWindowClass,WheelStd,0,9
*,*,firefox.exe,*,*,MozillaUIWindowClass,WheelStd,0,9
*,*,firefox.exe,*,*,*,WheelVkey,0,9
Save the file and restart the machine.

USB Mouse not work with Mac OS 10.6

I have a USB mouse can work with Mac OS 10.4 but cannot with Mac OS 10.6. Noticed the different is the USB mouse motion reporting is 12-bit instead of 8-bit. It can definitely work on Windows with standard USB HID driver. I wonder if the OS 10.6 is having a different USB HID driver specification which is not posted in USB-IF.

Ask the Vendor.

My canon EOS DIGITAL ver 24.0 in not working with mac pro os x

MY CANON EOS DIGITAL SOFTWARE VER 24.0 IS NOT WORKING WITH THIS VERSION OF MAC OS X

Atiya wrote:
I have a Mac Pro (2 x 2.4 GHz Quad-Core, model identifier MacPro5,1) purchased in late 2010 and a 24" LED Cinema Display. The Mac Pro has three video ports--a full-sized DVI and two mini DVI. When I plug the Cinema Display into either of the mini DVI ports, I cannot get a picture, although the iSight camera works fine. If I plug another monitor into the full-sized DVI port the computer believes that is the only monitor. The Cinema Display works fine with my MacBook, so there is nothing physically wrong with it.
Is it not possible to use this monitor with a Mac Pro without an adapter, even though the Mac Pro does have mini DVI ports?
I use a 24" LED with my Mac Pro. Works a treat!
Does this help you? http://support.apple.com/kb/TS2400
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.6); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.6)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

HP Envy 5530 e-all-in-one Does Not Work With Mac

Just bought an HP Envy 5530 all-in-one. It does not print through Safari and possibly other Mac applications. Does not frame the page properly even with "print page" and prints slower than 1 page per minute, even with no background images. My old HP had no problem with Safari. Phone support tells me there is no driver or fix. So I will return the device. Seems crazy. I now see othr commenters saying it doesn't work with Mac. If HP's no longer works with major Mac applications, they will be returned in droves. Anyone know why or know of a fix?

I am having the same issue. Did you ever find a solution?

My banking website ask me to install latest IE . but IE8/9 does not work with mac

My banking website ask me to install latest IE . but IE8/9 does not work with mac

You should contact your bank to see what browsers they support and until then ignore the message. The chances are very good they suppport Safari and Firefox, both are great browers.
Roger

Exchange Server not working with Mac mail

Any tips on how exchange can work work with mac mail? I get connection errors.

Hello Phil.
Copied from Mail Help.
An Exchange account allows you to connect to your Exchange server via IMAP, and if you enter text in the Outlook Web Access Server field, Mail filters non-email related content from the server. (You can get the text you need to enter from your mail account provider.) For Exchange to work with Mail, Exchange administrators need to configure the Exchange server for IMAP access. Some system administrators may refer to an Outlook Web Access Server as an Internet Information Services (IIS) server.
Is the Exchange Server configured for IMAP access?

Itunes not working with Vista Home Premium 32-bit

Itumes 10.6.3 version will not work with Vista Home Premium. I have a 32-bit operating system. I'm not sure what to do next. It appears in trying to update it deleted the old itumes, as I can't find a copy of it when I search the computer.

Then I installed Quicktime on its own - still get the same error 'Quicktime has stopped working;
Okay. That will be the source of the iTunes problem. (Without a properly working QuickTime, iTunes won't work correctly.)
Checking on things that can cause QuickTime launch errors now.
Have you at any stage installed any Codec Packs, any copies of the programs QT Alternative, QT Lite or Storm Codec, or any media converter programs that can convert files into QuickTime readable formats?
(I'm checking on these things because depending on the versions of the programs/codec-packs, these can install earlier versions of QuickTime componentry on a PC, which can interfere with the running of a higher version of QuickTime.)

Windows Radius / NPS not working with mac book pro 10.9.4 wired

Hi,
I'm trying to get my Radius windows server 2012 working with the correct setting for using 802.1x wired connection for the mac book pro. The only issue I'm having is there is not much setting in the mac book pro. I'm not sure what need to setup on the sever to make it connect correctly and assign it to the correct vlan when it's authenticated.
Here are some screen shoots for my mac book pro
So I've got it up to a point where I have this issue and here is my screen shots setting:
So the above are my windows 2012 screen shot settings.
On the mac book pro, I'm getting a prompted about adding certificate and I've added that into the laptop and then I need to put the username and password information. I put the following:
[email protected] and the password.
I'm current working with someone at HP on the switch settings, everything looks good.
I know the following:
1. Wireshark: shows server is getting request from the switch but it's not accepting them here are my logs on the NPS:
RAD01 6274    Information      Microsoft Windows security auditing.   Security            2014-08-21 12:40:24 PM
Here is the detail of the machine:
Network Policy Server discarded the request for a user.
Contact the Network Policy Server administrator for more information.
User:
Security ID:                              S-1-5-21-2690993882-1154983957-2264505580-1328
Account Name:                         [email protected]
Account Domain:                                  LCS
Fully Qualified Account Name: LCS\username
Client Machine:
Security ID:                              S-1-0-0
Account Name:                         -
Fully Qualified Account Name: -
OS-Version:                             -
Called Station Identifier:                      b4-39-d6-ec-2c-00
Calling Station Identifier:                     ac-7f-3e-e6-32-34
NAS:
NAS IPv4 Address:                   xx.xx.xx.xx
NAS IPv6 Address:                   -
NAS Identifier:                         5412zl-xxx-xxxxswithname
NAS Port-Type:                                    Ethernet
NAS Port:                                 170
RADIUS Client:
Client Friendly Name:               HP Procurve 5412zl switch
Client IP Address:                                xx.xx.xx.xx
Authentication Details:
Connection Request Policy Name:       Secure Wired (Ethernet) Connections
Network Policy Name:              Secure Wired (Ethernet) Connections
Authentication Provider:                      Windows
Authentication Server:             rad01.xxx.xxx.ca
Authentication Type:                EAP
EAP Type:                                -
Account Session Identifier:                  -
Reason Code:                          1
Reason:                                               An internal error occurred. Check the system event log for additional information.
Again I don't know what's the correct setting the default 802.1x for mac book pro, but it should correct.
I'm also not sure what the internal error message is regarding about. The switch should automatically put me to vlan 7
Can you some please help out what the correct authentication method for mac 10.9.4.
Thanks

Flash Player is a browser add-on, not a standalone application.
You can test if the player is correctly installed at http://www.adobe.com/software/flash/about/

Plugin is not working with Mac 10.6 {64 bit intel machine}

Similar Messages

Maybe you are looking for