Plugin up-to-date check not showing plugin status

In Add-ons Manager page, I attempt to check the status of plugins, but the plugin check page (mozilla.org/en-US/plugincheck/) shows no plug-ins. The Add-ons Manager page shows 18 active plug-ins, some quite old ('07), some less than a day old. I have No-script installed and previously disabled Java alltogether, but for the plugin check I re-enabled and allowed all mozilla.org. I restarted firefox after those changes to attempt the plugin check.

hello, this is an error on the sever-side on the moment and not related to your local settings - there's nothing you can do on your end to solve the problem. however the problem is already known and getting worked upon, hopefully it will get fixed soon...

Similar Messages

Data is not showing up in report on ODS

Hi All,
we have requirment like below
we have an ODS no update rules and nothing with 5 fields . with bex reporting flag checked..
we have function module to fill the data for these 5 fileds in ODS active data table .
So data is there only in active data table that table was filling by using function module.
so i need report that data .when i created and run the report data its not showing up.
Please let me know whats the issues is and how to handle.
I appreciate your help
Regards,
Sirisha

In this case you need to use Write-Optimized DSO or if you are in earlier version, then you need to use Transactional ODSinstead of basic DSO.
thanks.
Wond

BizTalk BAM Data is not showing

In BizTalk 2010, BAM Data is showing correctly.
But in BizTalk 2013, BAM Data is not showing correctly while I am applying the same procedure for both.
Event Log shows not any error.
What I have to check for getting BAM data in 2013 ?
Which configurations should I check ?
Any kind of help would be appreciated.
Prakash

Prakash,
There are two parts to it:
Deploying the BAM definitions, which would create the BAM activities and its related DB artifacts.
Deploying the Tracking profile. This step hooks you port/Orchestration/messages to the db artifacts created in step-1.
If you see the BAM tables and its related DB artifacts means BAM definitions has been deployed.
If event log is clean, no data in
TDDS_FailedTrackingData, no data in AllInstances view , you have checked the above suggestions like TDDS means, then it could be the second step which is deploying the tracking
profiles may not have happened properly.
Check the following article for help:
Deploying and Undeploying Tracking Profiles
How to Deploy Tracking Profiles with the Tracking Profiles Management Utility
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

In IPhoto I changed movie dates after thumb nails were created in IMovie but the new dates are not showing up in IMovie. Is there someway to refresh the IPhoto event in IMovie?

Background: I'm transferring file folders from a Visa laptop via an external hard drive to my IMac. In the folders are photos and videos from different cameras. SO I first tried to import to IMovie but it would not recognize any of the files. So then I imported into IPhoto and both photos and videos were imported and I created events for each folder. When I first opened IMovie I had to wait for it to create "thumb nails". Then I could view the events in IMovie BUT the video clips are not together because they have vastly different dates and are mixed with videos from other events. I looked at the dates and said I can fix that in IPhoto which i did but those new dates are not showing up in IMovie. I think I need to somehow refresh the event data that Imovie is using but have not found how to do that in either IPhoto or IMovie.
I'm doing this on three events with about 100 photos and videos. But I have many 1000s more to do so need to know how to either fix this or delete these events, reimport, change the dates, then open again in IMovie. I'm sure that would work but I can't understand why changing the dates in IPhoto is not being reflected in IMovie.
Appreciate any tips or pointers.
OBTW this is my first question as a first time Apple owner.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

Ok, the issue seem to be solved. The problem was this:
The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
And then LR is reading them and all metadata information has been set / read correctly.
So this is solved.

Time of email shows in Date Column, Date is not showing on new emails

Date is not showing in Date column. Only time is showing.
I just migrated from OE - Old emails show the time & Date.

If these are emails received today that is normal. Thunderbird assumes you know what day it is and only displays the time for messages received today. It will append the date to these messages at midnight tonight.

Due date is not showing up in UWL

Hi ,
Due date is not showing up in UWL. Back end is ECC not GP Just regular work flow.
I can see in workflow object end date kind. But the field is blank. For due date any additional configuration needed.
I really appreciate your help.
Regards
Mark

Hi,
As far as I remember correctly, the Due Date in UWL is the Requested End date in the workflow. So basically you need to open the workflow in backend in WF builder and look at the step. There is a tab for setting different deadlines and stuff. If you do the settings there (for example set the requested end in 3 days), I think that work item will display the due date based on that data.
Regards,
Karri

GL posting clearing item amount and do not show doc status on the header

Hello,
GL post clearing amount both side and increase the no of items in the GL balance display. Inaddition, these clearing line item document header does not show document status field. I have another GL which does not post extra two lines and clearing item document is empty and header shows document status as A (cleared item).
Could you let me know what the difference and what need to be changed to make it not to post clearing items + and - and show doc status.
Both are same FSG and only difference tick mark not done for balance in local currency.

Thanks for your reply...but thats did not work. As I said earlier, I have a Structure in my rows and 2 characteristics in my free chracteristics and in my columns I have a selection of key figures...
What I want is when I drill down on one of my 2 free characteristics, I do not want to see rows with amounts (KFs) zero or space.
RR

I plugged in USB cable but not showing connected status in my ipod 4th generation

I plugged in USB cable but not showing connected status in my ipod 4th generation

What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

Oracle apps Data does not show in Discoverer

When running my query in sql developer, I have to execute the command apps.fnd_global.apps_initialize(user_id, resp_id, resp_appl_id) in order to show the result of my query. Without this, the query returns nothing. The problem is I am using this query as a custom query for my Discoverer report and my report does not show any record. Anyone knows how to handle this?

Hi,
There can be many reasons why a Discoverer report does not return data, but I don't think it will be because the session is not apps initialized. Check that the language has been set correctly, using the calculation userenv('lang').
As I don't know anything about your environment, it is a bit hard to guess what else might be causing this issue. Is there anything different about this report? What is the custom query that you are running?
Rod West

Data is not showing in R/3 ztable whlie creating XI inbound proxy.

Hi experts,
    I am creating an XI inbound proxy for zxx_stockyard_price_ib_dt ,
I created Ztable(this structure contains both filename and data structure) in R/3 and i am writing a code in sproxy to fetch the data from XI to R/3, R/3 is to fill and store the data in a ztabe .
XI data file is ok, however , when executed ,the input file of XI is not reflecting in the R/3 Ztable,
I need a help in this scenario,
here is the peice of code,
METHOD zxx_ii_stockyard_price_ib_mi~stockyard_price_ib_mi.
DATA : it_zxx_stockyard_price_ib_dt        TYPE table of zxx_stockyard_price_ib_dt ,   " input batches from file
         wa_zxx_stockyard_price_ib_dt        TYPE zxx_stockyard_price_ib_dt         ,
         i_zrva_trv_interfa                  TYPE TABLE OF zrva_trv_interfa ,
         wa_zrva_trv_interfa                 TYPE zrva_trv_interfa.
******fill input internal table from XI
wa_zxx_stockyard_price_ib_dt = input-stockyard_price_ib_mt.
*fetch the records from XI.
LOOP AT it_zxx_stockyard_price_ib_dt INTO wa_zxx_stockyard_price_ib_dt.     " looping input data of XI nd moving the data to R3.
    MOVE-CORRESPONDING wa_zxx_stockyard_price_ib_dt TO wa_zrva_trv_interfa.
    APPEND wa_zrva_trv_interfa TO i_zrva_trv_interfa.
   Modify zrva_trv_interfa FROM WA_zrva_trv_interfa.
ENDLOOP .
IF NOT i_zrva_trv_interfa IS INITIAL.
    LOOP AT i_zrva_trv_interfa INTO wa_zrva_trv_interfa.
      MODIFY zrva_trv_interfa FROM wa_zrva_trv_interfa.
      CLEAR wa_zrva_trv_interfa.
    ENDLOOP.
ENDIF.
FREE i_zrva_trv_interfa.
ENDMETHOD.
when execute and debugged i found the values are not showing in internal table i_zrva_trv_interfa (loop at i_zrva_trv_interfa), where i am going wrong?

> here is the peice of code,
>
> METHOD zxx_ii_stockyard_price_ib_mi~stockyard_price_ib_mi.
>   DATA : it_zxx_stockyard_price_ib_dt        TYPE table of zxx_stockyard_price_ib_dt ,   " input batches from file
>          wa_zxx_stockyard_price_ib_dt        TYPE zxx_stockyard_price_ib_dt         ,
>          i_zrva_trv_interfa                  TYPE TABLE OF zrva_trv_interfa ,
>          wa_zrva_trv_interfa                 TYPE zrva_trv_interfa.
>
> ******fill input internal table from XI
>   wa_zxx_stockyard_price_ib_dt = input-stockyard_price_ib_mt.
>
I think here at this place you have problem. As per your code you have moved the input-stockyard_price_ib_mt to wa_zxx_stockyard_price_ib_dt BUT you have not appended to the internal table it_zxx_stockyard_price_ib_dt.
If I am wrong then make sure it_zxx_stockyard_price_ib_dt is filled correctly before you loop on it.
also add the below check befor looping.
IF NOT it_zxx_stockyard_price_ib_dt is INITIAL.
> *fetch the records from XI.
>   LOOP AT it_zxx_stockyard_price_ib_dt INTO wa_zxx_stockyard_price_ib_dt.     " looping input data of XI nd moving the data to R3.
>     MOVE-CORRESPONDING wa_zxx_stockyard_price_ib_dt TO wa_zrva_trv_interfa.
>     APPEND wa_zrva_trv_interfa TO i_zrva_trv_interfa.
> *    Modify zrva_trv_interfa FROM WA_zrva_trv_interfa.
>   ENDLOOP .
ENDIF.    "IF NOT it_zxx_stockyard_price_ib_dt is INITIAL.
>
>   IF NOT i_zrva_trv_interfa IS INITIAL.
>     LOOP AT i_zrva_trv_interfa INTO wa_zrva_trv_interfa.
>       MODIFY zrva_trv_interfa FROM wa_zrva_trv_interfa.
>       CLEAR wa_zrva_trv_interfa.
>     ENDLOOP.
>
>   ENDIF.
>
>   FREE i_zrva_trv_interfa.
>
> ENDMETHOD.
>
>
> when execute and debugged i found the values are not showing in internal table i_zrva_trv_interfa (loop at i_zrva_trv_interfa), where i am going wrong?
Regards,
Sarvesh

Date Sent not showing in Sent Mail

After a certain date, using Mail application, the Date (sent) is not showing in the header along with To & From & Subject. Why?
I have tried to get it to show using view prefs. Doesn't work.
I have changed to using a network time server. Doesn't work.
I've tried moving it to another folder. Doesn't work.
I need the date to show so when I print, I have proof of date and time sent...
Anyone?

Not sure about the time stamp problem, but the missing "Sent" mails problem is not uncommon. This problem is one that a lot of people have and in my opinion, I think it's a problem with Apple's mail application, nothing at the user's end.
Does this happen only when you include an attachment or does that matter? Also, does it only happen when your outgoing message is delayed a bit? Check your junk/spam folder to see if your sent messages went in there.
This doesn't fix anything, but you might change your e-mail settings so that all new mails are automatically sent Bcc to yourself.
Sometimes the "missing" sent mails are not going in the right folder. I'm sure you probably already know, but in the left-hand column in MAIL, under Mailboxes, there is a second "sent" folder way at the bottom, depending on your other e-mail accounts, such as Yahoo or Gmail). Many people have discovered their missing "sent" e-mails in those.
It is a big hassle, for sure, and has been officially reported. Users with complaints are being told that Apple's Intrusion Detection and Prevention (IDP) systems block the connection from a user's e-mail client when it attempts to store outgoing e-mails, which contain attachments, to the users' sent folder.
This is supposedly due to the Mac OS/Mac Mail sending non-standard or erroneous commands to the server, emulating the activity which would be generated by an attacker attempting to abuse an exploit in the IMAP server. I doubt you are doing anything wrong, so it's just a matter of waiting for them to FIX this annoying issue.

JDBC to RFC data is not showing in RFC palyoad

Hi,
I am doing JDBC to RFC scenario. I configured the scenario while i executed the scenario JDBC communication chennal i can see the payload and its picked the data orom Oracle.
when i check in SXMB_MONI message showing scucess and request for message mapping i can't see any data in payload.
I am tried to use the Test coniguration and its showing success and its connected to RFC but while running the scenario the data is not in payload.
RFC communication chennal also showing green and when i click the message in payload i could't see any data.
Pls help me on this
Thanks,
Venkat

Hi,
I have checked the sxmb_adm the Logging=1 and server restarted even the same msg.
I have checked the runtime workbench the msg showing success and when i click the details the payload is empty.
I have tested the scenario through ID with mapping
this is the payload from SXMB_MONI
<?xml version="1.0" encoding="utf-8" ?>
- <ns:mt_bc_tran_sender xmlns:ns="http://testxi.com/oracle/test">
- <row>
<SET_ID>6</SET_ID>
</row>
</ns:mt_bc_tran_sender>
Request message mapping
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:_-BIC_-CQZOMD_ZL00004000 xmlns:ns1="urn:sap-com:document:sap:rfc:functions">
- <DATA>
- </item>
</DATA>
</ns1:_-BIC_-CQZOMD_ZL00004000>
I have tested in message mapping and Interface mapping its working fine
Thanks,
Venkat.

ABAP System data is not showing in SLD

Hi All,
I need to see ABAP System data in to my Java SLD, but presently i cant may be due to 2 main issues--
1. I have configured all the connections related to RFC properly & SLDCHECK is also giving Green status, but when i ran data collector job in RZ70,. it is giving me following logs
SLD DS Start Program
    0: inmumsap18_BW2_00                         : Execute program: SLDRFC
    0: inmumsap18_BW2_00                         : Execute program: SLDMSGSRV
    0: inmumsap18_BW2_00                         : Execute program: SLDIPSERV
    0: inmumsap18_BW2_00                         : Execute program: SLDINSTSP
    0: inmumsap18_BW2_00                         : Execute program: SLDINSTSC
    0: inmumsap18_BW2_00                         : Execute program: SLDINSTPRD
    0: inmumsap18_BW2_00                         : Execute program: SLDGWSRV
    0: inmumsap18_BW2_00                         : Execute program: SLDDBSYS
    0: inmumsap18_BW2_00                         : Execute program: SLDCOMPSYS
    0: inmumsap18_BW2_00                         : Execute program: SLDCLIENT
    0: inmumsap18_BW2_00                         : Execute program: SLDBCSYS
    0: inmumsap18_BW2_00                         : Execute program: SLDAPPL_SERV
    0: inmumsap18_BW2_00                         : Execute program: SLDASSOC
    0: inmumsap18_BW2_00                         : Collection of SLD data finished
    0: inmumsap18_BW2_00                         : Data collected successfully
    0: inmumsap18_BW2_00                         : RFC data prepared
    0: inmumsap18_BW2_00                         : Used RFC destination: SLD_NUC
    0: inmumsap18_BW2_00                         : RFC call failed: Error when opening an RFC connection
    0: inmumsap18_BW2_00                         : Test mode: No batch job created
i did created SLD_NUC entry in Visual admin of my source system then it gives me error of "RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA'.
So now i need to know, whether this job is actually fetching me data or not?
Also, when i check in SLD-Administration-data supplier tab, there it shows me my RFC server threads are down, so what to do for it? I did saw in one note, saying Restarting complete server will help, but i think that should be last option, so need to any other solutions prior to that?
Please also tell me, whether anything else to do for having ABAP system in NWA, i need to do basic activities from NWA for ABAP system?

Hi,
This is dual stack, but still i'm not able to see the system.
Also tell me, in SLD when i'm checking SLD Data supplier in Details tab, it is showing me RFC Server threads as down.
For example--
RFC server threads:
[DOWN] NUC:localhost_sapgw_SLD_NUC_160375285
[DOWN] UC :localhost_sapgw_SLD_UC_1570432430
[DOWN] NUC:localhost_sapgw_SLD_NUC_1566747572
[DOWN] UC :localhost_sapgw_SLD_UC_131845580
Is this hampering anything?
Also, in SLD, i'm not able to see Server Settings button/option in main page along with SLD Data Supplier starting option. I have already given concerned roles to my User J2EE_ADMIN, by which i'm logging in to the SLD, as this is my Administrator user.

Data selection not showing in Planning book

Hi everybody,
We were using one info cube on APO side and so from cube the data will be shown in the APO planning book..
Now we modifed the cube on APO by adding new infosource and new mappings from BW side with data marts.. I can see the data is successful loaded to cube, but the slection it self is not showing.. i dont see anything related to cube and so i couldnt run the planning book.. My point is data is available in cube bu planning book now have no data...it is not showing any data..
thanks
arya

There might be few things you should probably check
1) In the planning object structure just activate the POB. through the context menu.
2) I think you might have assigned the Infocube into the Planning areas as Infocube Fed key figures. Make sure that all the characteristics remain the same. There might be inconsistency between the char of the new Cube and the already existing PA.
3) Create time series to the PA or perform initialization of the PA.
4) Try creating a CVC manually and see if it allows to create.
Atleast now you should be able to see the key figures in the Planning Area.
Let me know if it works.

Plugin up-to-date check not showing plugin status

Similar Messages

Maybe you are looking for