Plugins settings reset to full

Does anyone have a problem with plugins such as the logic compressor resetting itself to full threshold as soon as you let go of the control.
If i pull the control on the gui down to a level i want, as soon as i release the mouse the control jumps back to maximum,
This does this on both logic and 3rd party plugs.
I have removed all contensious plugins and still the same.
I'm running Latest everything on a dual 2.5 g5 5gig ram
Thanks in advance Andy

Thanks for your reply .
Yeah automation is off and it happens in a virgin new song, btw ive thrown out user prefs , could it be something midi wise?
I'll experement with midi devices unpluged
Thanks Again

Similar Messages

  • ColdFusion Builder 3 Settings Reset on Restart

    I've downloaded the ColdFusion Builder 3 trial and am experiencing some odd and very annoying behavior.
    I've customized some code editor text font and color settings. I've added an entry to the CF Servers panel for an instance of ColdFusion 10 running inside a VMWare virtual server on my laptop.
    When I restart Eclipse, all the code customizations I've made are reverted back to the default install settings and the entry in my CF Servers panel is gone.
    I've been an IntelliJ user for well over a year, but in doing much more cfscript-based development the CF Plugin for IntelliJ is proving to be a hindrance so I thought I'd give CFB 3 a try and see if there were any improvements over CFB 2. However, I can't take this kind of behavior. Hopefully someone can give me a setting or someone else has seen this before and can give me an idea of where to start looking.
    I have CF Builder installed as a plugin into Eclipse Kepler 64-bit for Mac. I added the CF Builder update site and have updated to CF Builder 3.0.0.290000. I also previously installed as the standalone version with no additional plugins and experienced the same behavior.
    Anyone have any ideas?
    Thanks,
    Dan

    Milan...
    My apologies for taking so long to get back to this. I just did some testing tonight of your instructions as well as those by Kaif above.
    Firstly, I installed ColdFusion 10 locally on my Mac. I added the local server to the CF Servers panel successfully. After restarting Eclipse, the localhost entry remained in the CF Server panel.
    Secondly, I followed your instructions to make a new profile and make my font/coloring customizations in it. I restarted Eclipse and my font and color selections were maintained (through 3 restarts). I noted that my newly created profile was selected in Preferences after each restart.
    I then added a remote CF 10 server to the CF Servers panel successfully (as noted by the panel telling me that the server was running and being able to launch the CF Admin from within Eclipse). At this point there were 2 entries in my CF Server panel--localhost and the one remote server that lives inside my VM. I restarted Eclipse and when it came back up, only the localhost server remained. I might add that the VM has ColdFusion 10 installed in "multi-instance" mode and that the remote server instance that I added to the CF Servers panel was one of 4 CF instances configured and running inside the VM.
    All the while, my font and color customizations have remained the way I set them.
    So, it appears as though we're down to just one bug relating to remote server registrations in the CF Servers panel.
    I saw that another user was reporting something similar in this thread: ColdFusion Builder 3 RDS and Remove Server settings reset on each restart so apparently it's not just me.
    Thanks to you and everyone else for all the ideas and troubleshooting help thus far. At least at this point I think I might be able to use this for day-to-day coding, even though I really want the remote server system to work correctly so I can use the step debugger feature again.
    Dan

  • IPhone 4S 5.0.1 Update Improves Battery w/ Settings Reset

    After installing the update make sure you reset all setttings. I have done a few updates now  and  have had much better  sucess after settings reset all. Standby drain has been virtually eliminated from 2-4% hr before update. It is located in settings/reset//reset all settings. You loose some wifi and desktop settings, but data, apps, etc remain intact.

    freddy,
    you don't really need to completely restore as new phone, but reset all settings in my experience and do a full drain and recharge.  it is located settings -> reset -> reset all settings.  this clears all the basic settings (i.e. wallpaper network, etc) back to default, but still keeps all of your apps, email and data as they were.  when it reboots though choose "setup as new phone" after you go throught the basic questions (i.e. lang, location, siri ) setup.  your apps, data will still be there as before.
    still midway through my second day (east coast) and after nearly 5 hrs of standby and 30 minutes of data usage, battery is at 93%.
    ps: does the mk5 refer to a golf... i have a mk6 tdi

  • Base Station, Error 4 for any action, Factory settings reset didn't work

    Hi all,
    I decided to try my AirPort Base station (which was used by someone else before), and have changed some settings trying to make it work Now I keep getting that annoying error message with -4 error code when trying to connect to my base station, and can't make any changes whatsoever.
    I have a Windows Vista OS, and an 4.1 Admin utility ( I tried to install a later version, but it kept saying I had to "install Windows XP or Vista first". (Kidding?!)
    I did both a soft reset and a factory settings reset (although I don't know how I did the latter, since both pressing the resed button for 5 and 30 sec did not work. Anyway, the station's name has changed to its serial N, so I did the reset somehow
    The station's IP address in the Admin Utility begins with 172. and the same IP ip address I have in my network settings. I guess I had changed the ip somehow, and that's where the problem started... Anyway, I can't enter the configuration window to change anything.
    Any ideas?

    Still no ideas? I can't believe there's nobody to answer this question
    Well, as I said I believe the problem is the ststion's new ip address, but I don't know how to change it.
    I did a full reset, but the ip address did not change, so maybe it is my laptop's setting to blame?

  • Plugin settings not preserved from MacPro to G5 - Logic Pro

    Hi there,
    I have an annoying problem - I recently recorded some songs on my Macbook Pro using Logic Pro 7.2.3 and the Renaissance compressor and reverb from the Platinum bundle. I found when I transferred the song files back to my G5 that the Waves plugin settings were not preserved and reverted back to the defaults, and I have had to write down the settings for each track and reset them manually.
    I have the Waves 5.9.1 Platinum bundle on the Macbook Pro and the 5.2.1 bundle on the G5 both running OS X 10.4.9.
    Has you seen this problem before?
    Any comments would be most welcome!
    Regards
    Rick

    Hi there,
    I have done some experimentation on the different platforms, but I still have had no success in resolving this, even though I have installed the latest version of the Waves plugins on my PPC Mac. I do have some comments to make from the tests I made to try to track down the problem.
    Saving the settings in Logic as channel strips or using the down arrow on the Logic frame surrounding the plugin, and selecting 'Save As' do not transfer the settings saved on an Intel based mac to a PPC based one (.aupreset files are saved this way).
    What does work is saving the settings from the 'Save' button on the Waves plugin itself and transferring the .xps file from the Intel Mac to the PPC mac and loading the setting from that file.
    The reason for this may be because the Waves format file (.xps - XML format) stores the plugin settings in human-readable form in the file. The Logic format file (.aupreset - also XML) on the other hand saves the plugin settings as a block of mixed text characters representing the settings as binary data.
    Since this is the case, I think that the PPC Waves plugin can handle its own format files 'cos they are in readable text, but when presented with binary data (which presumably has byte swapped data words in it - Intel and PPC chips differ in this respect) it cannot understand what is being presented to it and fails to load the info.
    If that is the case, Waves need to change their plugins on the PPC platform to understand settings delivered in a binary form from Logic - I keep looking at the Waves site periodically to see if they have.
    Cheers
    Rick
      Mac OS X (10.4.10)  

  • Restore only saved wifi passwords after Network Settings reset

    Hi, I did a Networks Settings reset without realising it would wipe my wifi passwords. I know they're in the backup on my iTunes, but I don't want to do a full backup and lose some recent data from other apps that's on my phone.  How can I restore the wifi passwords without restoring the whole backup and reverting the phone back to a previous state?  Thank you!

    barrybarrybaz wrote:
    I know - as I said, they are in the backup. 
    And, how do you know that? Did you encrypt your backup? No where in anything you've posted so far have you stated such.
    Regardless, the restore from backup process is all or nothing, & I'm not aware of any software that can extract data from an encrypted iPhone backup. So, if in fact your backup is encrypted, then your only option is to restore from that backup.

  • Settings reset code?

    Does anyone know the code for a total settings reset on the N95 please

    It must only be in a few thousand posts on these forums so pretty obscure.
    Revert to factory defaults: *#7780#
    Soft reset: *#7370#
    Hard reset: power off. Hold down '3', '*' and 'call'. Power on with those buttons pressed. Release them when the phone shows the nokia "handshake" logo or the language selection screen.
    Do a backup first - these procedures will wipe your settings at least, and the resets will wipe everything in the phone's central memory (but not the content of the memory card).
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Settings reset when Comp resta

    Since downloading 2.8.0004, whenever I restart my computer ALL my sound settings reset to stock settings. (Volume settings, Mic settings, etc). So everytime I restart my computer I need to go through all my settings and put them back where I want them.... EVERYTIME. I tried to figure it out on my own, but I'm at my wits end.
    Any help you guys could give me would be very much appreciated.
    System Specs
    SoundBlaster X-Fi ExtremeGamer
    Asus P5N-D
    Intel Core2 Quad CPU Q9300
    Nvidia EVGA 8800gtx
    Vista Home Premium x64
    4gb Mushkin Extreme RAM
    Anything else you need, please let me know.

    Hello Nafets727,
    You might want to check this thread.

  • Finding good plugin settings

    After purchasing Logic Pro, I was surprised the setting choices that came with plugins (EQ, Space Designer, etc...) were not very realistic. A Piano in a Space Designer "Piano Concert Hall" sounds more like it's in outer space. The EQ setting for piano also sounds muffled and unrealistic. I've been able to play around with the settings to make them more realistic, but I was wondering if there is a forum somewhere where people post their plugin settings. It would be nice to share in all the hard work it takes to fine-tune these settings.
    Anyone know what I'm talking about?

    We have never sent an email to any of our registered members unless contacted first by the member. No spam here.
    I did take the time to visit the spamgourmet site and have to say it really sounds like a great idea!
    But anyway yes, we welcome all of your Logic presets: plug-ins, channel strips, Environments or song templates... and we already have about 40 of those files posted by members. I'd actually like to hear your enhanced piano sound preset.
    David.
    G5 Dual 1.8GHz - Logic Pro 7.1   Mac OS X (10.3.5)  

  • HT5569 4S phone to IOS 7.1.2 and lost my wi-fi.   The wi-fi is on, but can't find ANY networks.   I have been through all the steps, from turning the phone on and off, resetting the network settings, resetting the whole phone, redownloading 7.1.2 an

    I updated my 4S phone to IOS 7.1.2 and lost my wi-fi.   The wi-fi is on, but can't find ANY networks.   I have been through all the steps, from turning the phone on and off, resetting the network settings, resetting the whole phone, redownloading 7.1.2 and lastly going to the Apple store for help.   They tried all the exact same steps I did, took the phone apart and looked at and said it is in "pristine" condition.   They have no idea why it isn't working, but they could offer to sell me another phone.    This is extremely annoying!    They claim it has nothing to do with the update to 7.1.2, but that is when I lost the wi-fi, so it has to be related!

    My 4s i-phone which is 2 years old cannot find any wi-fi networks not even my home network... I had the same problem two months ago but i turned off the i-phone for 8 hours and then it was okay... Now it happened again.... I tried to restart the modem but whilst my laptop is connected regularly, my phone still cannot find any wi-fi networks... I restart the i-phone, i reset it, i chose reset network settings, reset all settings, i turned it off for a whole day in case it was overloaded, i turned on the airplane mode and turned it off again, i put it into the freezer for 10 minutes within a zipped bag but 3 days now and i still cannot be connected to my home wifi... I went to the technician today and he told me that it means that wi-fi is broken and that i need to change it with a charge of 70 euro but i have to give my phone for 10 working days so as to be fixed... I am so frustrated and i don't know if i want to give 70 euro for wifi since i don't know if it would make the same problems again... 

  • My front camera is not working. it shows the shutter pic and won't work on any apps. does anyone know how to reset it? i have already done reset and full reset.

    my front camera is not working. it shows the shutter pic and won't work on any apps. does anyone know how to reset it? i have already done reset and full reset.

    Did you try to set it up "as new device" without using the backup afterwards? How to set up your iPhone or iPod touch as a new device
    If this does not work, get it serviced or visit your next Apple Store.

  • WiFi only works close to router, DNS fail, Signal Bars present but Safari says no Internet, I've deleted and readded through to reset and full reset, I had no problem with 4.3.2 only 4.3.3 both my iPhone4 and my iPad2. I am now beside router - no problem

    Help
    WiFi only works close to router, DNS fail, Signal Bars present but Safari says no Internet, I've deleted and re-added through to reset and full reset, I had no problem with 4.3.2 only 4.3.3 both my iPhone4 and my iPad2. I am now beside router - no problem, but go 20 metres and WiFi becomes unstable. Only way to get either to work is disable WiFi either as a Hot Spot or turn it off and use the 3G connection. This worked with 4.3 & 4.3.2 what has gone wrong? I raised it at the Apple Store in Belfast as a problem but was told that there was no problem with Apple but I must have a faulty router - yeah - that's a lot of faulty routers, my home, my office, my holiday home, Starbucks, my friends house, my son's house. I've tried all the 'fixes'. I think it is a plan to force us to buy Apple Routers

    Two ways out, I added two more Belkin Access Points in my house in Spain so that I'm not more than 10Mtrs away, (Reinforced Concrete & solar glass 2010)
    I bought 3 Apple Airports, 1 x Extreme and 2 x Express (1 as a hard wired AP, 1 as an extender) for my other house (Brick construction 1930's)
    Everthing now works perfectly, as I said 'an apple plot', so either blast them with signal or visit your nearest apple store.
    Early beta iOS5 (iPad) is also much inproved in Beta 3, I have not had any problem with 'Lion'
    Happy hunting!
    john

  • Volume resets to full when download finishes while viewing in browser

    While viewing a Quicktime movie in a browser (either Safari or Firefox), if I set the volume while the file is still downloading, once it has finished downloading it always resets to full volume. It's little bit annoying. Anybody have any ideas why or how to fix it? I had a search of the other threads but couldn't find anything... is this only happening to me?

    After thinking about this...to be honest. You'll have to download the video edit the sound volume and do a save...

  • Hi, I have iphone 4s and since yesterday my personal hotspot will not work. It's always worked fine in the past and I have a plan with three uk which includes tethering. I've tried everything I can think of including resetting network settings, resetting

    Hi, I have iphone 4s and since yesterday my personal hotspot will not work. It's always worked fine in the past and I have a plan with three uk which includes tethering. I've tried everything I can think of including resetting network settings, resetting the phone as a new phone but nothing works. When connected to the pc it shows on the iphone screen '1 connection' but the pc says 'no internet connection' I've spoken to three who say it must be a phone fault. Any help appreciated. :-)

    If you have restored as new that pretty well covers software issues
    Looks like a trip to an Apple Store and a likely Out of Warranty exchange unit  £159 over the counter
    May e consider an upgrade with the money ?

  • After draining battery, Safari cookie settings reset

    I am having an issue where the Safair Cookie settings reset after draining the battery. Is anyone else seeing that? Is there any work-a-round to prevent that from happening.
    The Accept Cookies gets set to "Never" which makes it hard to do things like GMail, etc..
    It also happens on my wife's phone which is running iOS 5.0.1.
    Thanks for any insight!

    ... and more info from last night.
    Last night, before I went to bed I checked gmail. It worked perfectly. I double-checked that cookies were set correctly. The phone was on the charger all last night. When I woke up Accept Cookies was again set to "Never" and gmail wouldn't load.
    Arghhh.

Maybe you are looking for