Plugplug.dll missing at start up of PScc

Hi there,
I get this message on start up of PS cc. Still lets me use PS cc, used to only happen in Admin mode (I needed to use this to get an extension to work see below) but now its in any mode.
info:
I am on my trial still, win 8, 16gb ram, i7 laptop.
Extensions:
GuideGuide
Catalist
Pixel dropper*
Webzap
(* this is the program i needed to run in admin to get it to load without crashing photoshop but then it wouldn't let me drag files and a fwe other things so I stopped that and just don't use it much wich is a pitty as its gooood)

Problem solved by now:
Originally I copied my old plugins from PS 7 into the plugin file of PS 10, maybe this caused the mistake.
Meanwhile I saved my old pluginfile (just to know which plugins I had), deinstalled PS 7 and PS 10 completley, deleted all the corresponding Adobe files und "programms" and cleaned up the registry by CCcleaner and CCenhancer as well as by Tune up Utilieties 2011.
Than I reinstalled PS 10, installed my Nik Software "Complete Collection" and installed one plugin after the other of my other plugins manually.
Now the PC runs without any problems.

Similar Messages

When I try to install iTunes on my Windows computer I get an error message, "Apple Mobile Device failed to start". After an incomplete installation when I try to open iTunes I get an error message, "MSVCR80.dll missing". I downloaded MSVCR80.dll.

When I open iTunes I get an error message "MSVCR80.DLL missing". I downloaded this .dll and installed in C:\Windows|System32. I then scanned my computer to fix registry errors.I uninstalled iTunes and reinstalled and got the following error message "Apple Mobile Device failed to start".

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Firefox 5.0.1 fails to start with sqlite3.dll missing message

ff 5.0.1 started losing all my bookmarks. I imported them and the next day they were gone again. I had other strange things happening so I decided to go back to ff 3. I uninstalled ff5.0.1 and removed the ProgramFiles directory. I installed ff3 and it worked ok. I used it to upgrade to I believe 3.0.19 ok. I then upgraded to 3.6. The upgrade appeared ok but it would not start. I got an sqlite3.dll missing message. Nothing I have done has gotten ff to start. I have uninstalled and reinstalled 5.0.1 and still be sqlite3.dll missing message. I searched my C drive for sqlite3.dll and found several stored with other applications. The FF directory had an mozsqlite3.dll but not just sqlite3.dll.
At this point I can't start FF.

Try downloading Firefox again, then uninstall Firefox, remove the program directory, and install it all over again.

I use Windows 7 and can't get itunes to start due to msvcr80.dll missing.

I use Windows 7 and can't get itunes to start due to msvcr80.dll missing. I downloaded and installed latest version of itures and can't get it to start. Any suggestions?

Hi, I followed others yesterday with the same problem and removed all Apple Inc programs, rebooted and reloaded iTunes appears to of sorted this issue but as others have found OUTLOOK now takes ages to load and open ??

Help! AfterFX won't start because .dll missing

As the title says, out of the blue after fx stopped working. I tried installing it and re installing it, but it won't work.
What can I do? Is there a .dll missing from my OS? By the way I use, windows 7 64bit.
Thank you very much in advanced!
K.

Thanx for helping.
I have a windows 7 64-bit OS. With intel core i7-2670QM CPU @ 2.20 Ghz and 16 GB (ram)
I have an adobe cs6 master collection. Since I can't access AE, I can't say what version it is, but the file number is: 6.0.335.0
It has always worked. I never had a problem before. I work often with Photoshop, and less with after fx, and premiere, still those 3 are the ones I use the most, from the entire suite. A few days ago out of the blue, AE stopped working. I had it installed 3 weeks before and by then it did worked. Since I newly bought a bigger hard drive, I had to format/ re install everything. After that, the only program from the cs I can really say it worked was photoshop.
Now when I open AE all I get is the following message:
AfterFX.exe - System Error
The program can't start because .DLL is missing from your computer.
Try reinstalling the program to fix this problem.
I tried formatting the pc and reinstalling windows 7 with all updates, and with out any. With and without internet connection. And so far nothing. The only thing completely different now, is that I have a bigger non ssd hard drive.

Missing php5ts.dll when I start php

Hi all,
1) I reinstalled PHP version 5.28 thread safe on Windows 7 SP1
I selected IIS/FastCGI
then using the IISManager I estalished a mapping between IIS and php-cgi.exe.
I still get php5ts.dll missing. Any Ideas.
I just want to connect to a SQLSERVER 2012 located on one of my ISP's servers
and manage the a database from a local php script.
Thanks,
Milt
miltonkbenjamin

Hi Milt,
After researching some documents, this issue is related to PHP installation and configuration rather Microsoft Drivers for PHP for SQL Server, you can post this issue to PHP Community forum. I listed the link below. Additionally, I found some solutions on
the following links, you can also refer to them.
PHP Community forum
http://forums.iis.net/1102.aspx/1?PHP+Community
Problem with PHP exec()
http://forums.iis.net/t/1177773.aspx?Problem+with+PHP+exec+
in the download for PHP 5.3, there is no php5ts.dll
http://social.msdn.microsoft.com/Forums/en-US/922f92fd-6ef2-4eff-956e-524269684807/in-the-download-for-php-53-there-is-no-php5tsdll?forum=sqldriverforphp
“The program can’t start because php5ts.dll is missing from your computer” Error
http://www.touchoftechnology.com/the-program-cant-start-because-php5ts-dll-is-missing-from-your-computer-error/
Best Regards,
Allen Li
Allen Li
TechNet Community Support

Attempting to install the latest update, received = this program cannot start "MSVCR80.dll Missing". What should I do?

Attempting to install the latest update, received = this program cannot start "MSVCR80.dll Missing". What should I do?

Click here and follow the instructions.
(98820)

Plugplug.dll win64 for photoshop CC

Hi,
I'm running the cloud on a window machine 64 bit. Everytime I open Photoshop I get the error : It cannot start because it's missing plugplug.dll, then it does load.
How can I rectify this error?

PlugPlug.dll is no longer supplied as part of Photoshop CC 14.x (the name has been changed). Thus, no part of Photoshop CC 14.x needs PlugPlug.dll to exist.
Chances are you copied some plug-ins from an older version of Photoshop into the Plug-ins subfolder of the Photoshop CC installation.
You need to undo that. It is not valid to just copy the entire folder of plug-ins from an old version of Photoshop, because in some cases you could pick up plug-ins that were supplied by Adobe to work only with that older version.
The Plug-ins folder under the Photoshop CC installation area is no longer normally populated with any files by Adobe. You could start by removing all files from there and then reinstalling your plug-ins one by one, and testing. If you MUST copy plug-ins (i.e, you can't get a Photoshop CC-compatible installer afresh from the plug-in's maker), you need to be very selective and be careful to pick up only the file(s) for the particular plug-in - you must AVOID the ones Adobe supplied. Keep in mind that some plug-ins cannot be installed just by copying files, and others require files elsewhere to be copied as well.
-Noel

Frequent crashes on module PlugPlug.dll

Dreamweaver CC 2014.1 has been crashing for me frequently if the app is left open for extended periods of time. I notice it most when I've left it running overnight or if I'm away from my computer for a few hours during the day.
The most common reason for Dreamweaver to crash is the PlugPlug.dll file. Here is the most recent error entry from my security logs. The problem started on 2/5/2015 and I've had 12 crashes since then.
Faulting application name: Dreamweaver.exe, version: 15.1.0.6981, time stamp: 0x54d123a5
Faulting module name: PlugPlug.dll, version: 5.2.0.38, time stamp: 0x53f3272f
Exception code: 0xc0000005
Fault offset: 0x0000000000036bb4
Faulting process id: 0x27cc
Faulting application start time: 0x01d051484148f000
Faulting application path: D:\Software\Adobe\Adobe Dreamweaver CC 2014.1\Dreamweaver.exe
Faulting module path: D:\Software\Adobe\Adobe Dreamweaver CC 2014.1\PlugPlug.dll
Report Id: a9fbce23-bdc3-11e4-b5b6-bcaec56ea490

hi Michael,
Can you please provide us complete logs. To collect log -
Create crash logs on win –
You need to add these entries in registry.
Go to run, type regedit and enter. This will open Registry Editor.
Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting->Right Click->New->Key. New key named "New Key #1" will be created. Rename it to LocalDumps.
Add two entries LocalDumps. Right click on LocalDumps->New->Expandable String Value (REZ_EXPAND_SZ). Double click on the entry created and add value name : DumpFolder and value data : %LOCALAPPDATA%\CrashDumps.
Right click on LocalDumps->New->DWORD (32 bit) Value(REG_DWORD). Double click on the value created and add value name : DumpType and value data :1
Next time when the application crashes you will find the crash dump at C:\Users[UserName]\AppData\Local\CrashDumps. Dumps will be created only in case of crash and not hang.
Thanks!
Kusha

Elements 12 organizer has stopped working and premiere elements 12 get msvcr80.dll missing errors

elements 12 organizer has stopped working and premiere elements 12 gets msvcr80.dll missing errors

First deactivate the product(s) and then uninstall it from the machine using the procedure specifically for your OS. If in Windows and I suspect it is then uninstall from the Control Panel.
To deactivate the product you need to go Editor and then:
Help >> Deactivate
Please also make sure that you have your original CDs and /or DVDs handy including the necessary serial number as you will need them to install the product(s) again.
After uninstalling the products, you need to restart the machine before you start to install again.
You have created the backups of your sentimental photos, right? You need to just in case the machine causes more problems down the line.
G/L

Error while startup: msvcrt.dll missing

Hi,
on some boxes (maybe windows 2000 ) we get a error while startup: msvcrt71.dll missing ...
whatÂ´s the problem ?

Andre,
since this is difficult to answer without a detailed description of the use
case, could you please post information about the how and what you are
trying to start, i.e. the command line, the operating system and what
version of JRockit you are using and have installed.
The file msvcr71.dll is needed by a few launchers and libraries inside the
JRockit JDK but those cases should be covered if launching using e.g.
java.exe. The only case that comes to mind is if you are trying to load the
jvm.dll directly, if that is the case you should copy
<jrockit-jdk>/jre/bin/msvcr71.dll to
<jrockit-jdk>/jre/bin/jrockit/msvcr71.dll to see if it helps.
Best Regards
/Robert
<Andre Frintrop> wrote in message news:[email protected]..
Hi,
on some boxes (maybe windows 2000 ) we get a error while startup:
msvcrt71.dll missing ...
what??s the problem ?

CS6 Service Manager / Vulcan Control.dll Missing / App Crashing on Startup

I am using Windows 7 on a CC Team Member, not the first time i have had this issue where App's whould not update but got it fixed. This time however it wont fix and i no have a CS6 Service Manager Error & VulcanControl.dll missing error.
I am not using CS6 all my products are CC App's.
Would love some help as I am a team member online support is not allowed and when i tried calling i was on hold for 45min then I had to let someone else use the phone in office.
At the moment I dont have any CC or CS6 products installed, I have also used Adobe Creative Suite Cleaner.
Please can someone help.
Thanks

There seems to be a real issue here . I get this problem. CC2014 runs for a short time after I reinstall a back up operating system then up it comes again Vulcancotrol.dll missing program can not start.
I can find no solution. Any attempts to fix or reinstall get blocked by Norton. Even if I turn of my anti virus I can not get this .dll back.
What is going on?
Need help please. I reinstalled a working system this morning but the same problem has now come up again. Attempts to re register Vulcancontrol result in a message that is is not present!

When I try to use my itunes I keep get the message "msvcr80.dll missing. reinstall program" I have reinstalled itunes several times with no change.

Everytime I try to start my itunes app I get the message " msvcr80.dll missing. try reinstalling the program" I have reistalled itunes several times and this keeps coming up. The msvcr80.dll is on my system. What am I missing? This has only been going on since the last itunes update.

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

TS3212 Error message: File MSVCR80.dll missing

I rencently got this error message when trying to start itunes: Dile MSVCR80.dll missing. I uninstalled itunes and reinstalled and got the same error message. I had tried to load the new update when this occured. Im am on a Dell, windows 7.
Anyone have any idea what the problem is?
Thanks

Click here and follow the instructions.
(99056)

Wsmp32.dll missing

I have the new Photoshop CC, but I need PS5 for doing
passports and other packages that Adobe carelessly removed from newer products.
However, when doing pkg and printing I get a
wsmp32.dll missing error and it freezes the program.
Even Control / Alt / delete and closing application doesn't work so I have to force a
closure on my computer..
How can I fix this?
and what caused it...
Thanks Tracy

If it just happened, you can try a System Restore.
Using System Restore will not affect your documents, pictures, or other data.
To use System Restore (Windows XP, Vista, 7, and 8):
Click the Start button.
In the search box, type "System Restore" and hit ENTER.
In the results, click System Restore.
Enter any administrator passwords (if prompted).
Follow the steps in the Wizard to choose a restore point.
Restore your computer.
Gene

Plugplug.dll missing at start up of PScc

Similar Messages

Maybe you are looking for