Plus symbol is disable in SAP R3 MMC Console
Hi All,
I am unable to start SAP R/3 MMC , that is when I open SAP MMC console and click on + symbol of SAP R/3 system it is going to be disabled .So I am unable to start the SAP Management console .
I am using 4.7 IDES EE on the windows 2003 server .
Please provide me the solution ASAP.
Regards,
Bharat .
Hi,
Probably your SAP services are not running.
start->run->services.msc see if you SAP services are disabled. If they are, then start them.
Regards,
Vishnu
Similar Messages
-
Stop SAP from mmc console invalid credentials
Hi everybody
I'm trying to stop the SAP System over the MMC console 5xx13
After right clicking the instance and selecting stop SAP system I type in the user credentials <sid>adm and password.
the message invalid credentials appears.
Has somebody ever tried this way?
thanks for your help
Murat> After right clicking the instance and selecting stop SAP system I type in the user credentials <sid>adm and password.
> the message invalid credentials appears.
Is this a local system (on Windows) or is this a remote system on Unix?
Markus -
Error while starting SAP from mmc Console
Hi,
I am trying to start SAP system through sapmmc, by right clicking on the System and pressing start. But getting this unknown error:
Start Failed: 2
NIECONN_REFUSED (WSAETIMEOUT: Connection timed out), NRawConnect failedin plugin_fopen()
Checking Start Permission on http://oiam:50113 failed: NIECONN_REFUSED (WSAETIMEOUT: Connection timed out),
NRawConnect failed in plugin_fopen()
Can anyone help me in getting this resolved.
Regards,
ShubhiHi,
Restart the OS and try........i have faced the similar problem..I tried it by restarting the OS....
but,
my database was on AIX and SAP was on windows....
I dont whether this helps you....i
Regards
Suresh -
Portal: Disable the SAP tool bar and enable a pop up in SAP IAC iview
Hi Experts,
My requirement:A user will open the ESS->Bank details iview (which uses the standard transaction PZ03) and would like to edit a record. So, he clicks on the change button and a screen to edit the record comes up. Here, he edits information as required and now decides not to save these changes. Then the user clicks on the back button and a pop up dialog box appears which asks the user if he would like to proceed without saving the changes. Once he clicks on OK, he is taken back to the previous screen. Also, in the iview, the SAP tool bar must be invisible.
I can achieve the dialog pop up to appear using these ITS parameters:
~popups = 1
~generateddynpro = 1
In this case, the SAP menu tool bar is very much visible.
If I give the ITS service parameters as
~webgui = 1
~webgui_simple_toolbar = 1
~popups = 1
~webgui_popups = 1
Here, I'm able to disable the SAP tool bar but my pop up dialog box does not appear.When I click on back button, I continue to remain on the same screen instead of the pop up dialog box getting opened.
If I give both ~webgui and ~generated dynpro together, it's not helping either.I cant see the pop up again, but able to disable the tool bar.
Need some inputs to fix this issue.
We are on EP 7.0, ECC 6.0 and ESS/MSS 50.4
Thanks,
M.ManeeshaPlease keep following parameters in the ITS services and your problem will be resolved.
Make sure you remove all parameters other than below.
~AUTOSCROLL 0
~GENERATEDYNPRO 1
~LANGUAGE
~LISTSCROLLING 0
~LOGIN
~PASSWORD
~POPUPS 1
~STYLE DHTML
~TRANSACTION PZ03
~WEBTRANSACTIONTYPE EWT
Edited by: Barin Desai on May 11, 2010 6:45 PM -
How to use Symbols or icons in SAP script
Hai ,
I am facing one problem in sap script , I want to display one of my field as icon (or )symbol ( tick mark ) in sap script . how to do . Particular transfer order ( check LTAP table ) having 10 line items . In 8 line items are confirmed ( pquit = 'X') others not confirmed . if LTAP-pquit = 'X' then instead of 'X' i need tick mark symbol .Icons and symbols in SAPscript texts
To print these, use output devices whose device type uses one of the following printer drivers:
· HPL2 (PCL-5 printers, such as HPLJ4, HPLJ5, HPLJ5SI, or HPLJ4000)
· POST (PostScript printers, such as POSTSCPT, or POST2)
· PRES (PRESCRIBE printers, such as KYOFS150, or KYOFS170)
· SWIN (device types SAPWIN/SWIN and country-specific versions)
Icons and symbols in ABAP lists
If you also want to print these characters in lists, you must define an output device with one of the following device types:
· HPLJ4000/HPLJ5000/HPLJ1100: Device types for PCL-5-printers
· KYOFS170: Device type for Prescribe II printers
· POST2: Device type for PostScript Level 2 printers
· SAPWIN/SWIN and the country-specific versions: generic, that is, device-independent device type for printing using Microsoft Windows -
how do you change the minus symbol on the quick selection tool to a plus symbol? im finding it difficult to select an area.
You can use the Alt/Option key to toggle between add + and subtract -
http://helpx.adobe.com/photoshop/using/making-quick-selections.html
First though select the Add to Selection in the tool options bar for that to work. -
Instance Status Yellow on SAP MMC Console
Dear Experts,
We are installing NW 7.0 dialog instance on Windowsx64 bit platform, Central instance is running on Aix64 bit,
NW 7.0 Java add-in has installed on Central instance,
I want to start only abap instance on new windows application server, i set rdisp/j2ee_start parameter to "0",
Now java process do not start but SAP mmc console status is yellow because of it, disp+dowk process message is J2EE status info unavaliable,
How can unistall Java instance from newly instaled application server ?
Best RegardsHi,
Regarding the MMC display "J2EE status info unavailable", as you don't want a dual stack remove the entry icm/HTTP/j2ee_0 from the instance profile and set the parameter 'is/HTTP/default_root_hdl = abap'.
Please reboot your system (bounce OS) to see if this helps.
If this does not help please try this.
1. Stop the SAP service
2. Open a command prompt
3. Go to usr\sap\<SID>\...\exe\run
4. call 'sapstartsrv.exe -t' from the command line
5. Confirm the dialog window
6. Start the service again
Best Regards
Niraj -
SAP Microsoft Management Console Windows MMC no open
Hello guys,
I have a problem with the MMC is not working and does not open. I do not get how to stop the instance of SAP. When I open the MMC is running the process and never opens it.
I am also trying to stop the instance with the following command STOPSAP.EXE name=SID nr=00 SAPDIAHOST=host from the D:\usr\sap\SID\SYS\exe\uc\NTAMD64, connected to the user and SIDadm gives the following error and does not stop the SAP instance:
Problem signature:
Problem Event Name: APPCRASH
Application Name: stopsap.exe
Application Version: 7010.137.18.59200
Application Timestamp: 4d98ef00
Fault Module Name: MSVCR80.dll
Fault Module Version: 8.0.50727.4053
Fault Module Timestamp: 4a59381a
Exception Code: c0000005
Exception Offset: 000000000001de04
OS Version: 6.0.6002.2.2.0.274.10
Locale ID: 8202
Additional Information 1: 087f
Additional Information 2: 44187f75b1dcde9b0b1e7fe2257e0dd7
Additional Information 3: d82e
Additional Information 4: 0064b09090719a14286f02f8be1df635
The instance of SAP is working without problems, but I need to stop services for server maintenance.
I have Windows Server 2008 Enterprise (Service Pack 2) y Oracle 10g.
How else I can stop the SAP instance, I do not restart the instance without stopping the services correctly.
Thanks guys for the help
Desiru00E9Hi Desirée/ Orkun,
Did you find a solution to the hanging issue of MMC.
It is not working in our case and we are struck for last 5 days and even SAP is not helping us with any inputs/ thoughts.
In our case, We have recently upgraded Windows to 2008 R2. SAP is coming up but MMC program hangs and has to be closed via CtR-ALT-DEL. After that mmc.exe process is started but MMC console does not comes up.
We get the following message in event viewer:
Log Name: Application
Source: Application Hang
Date: 9/9/2011 8:32:30 AM
Event ID: 1002
Task Category: (101)
Level: Error
Keywords: Classic
User: N/A
Computer: sap-xp-q01.saladinos.com
Description:
The program mmc.exe version 6.1.7600.16385 stopped interacting with
Windows and was closed. To see if more information about the problem is
available, check the problem history in the Action Center control panel. Process ID: fcc
Start Time: 01cc6f03c402c248
Termination Time: 6
Application Path: C:Windowssystem32mmc.exe
We have upgraded Kernel, installed the latest MMC patch.
Please advise.
Thanks,
Antarpreet -
Dear all,
i have tried to open SAP Solman MMC, i got the below error .
MMC cannot open the file c: \Documnets and setting\user\Windows\sapmmc.msc.
this may be because the file does not exit, is not an MMC console , or created by a later version of MMC. This may also be because you do not have sufficent access rights to the file .
NOTE : i have logged in SIDADM.
kindly advise
RegardsDear all ,
now there is no issue to open MMC ,.
I have checked ABAP WP table , it is showing all the work processes and status for work process is waiting .
The same thing i have checked J2EE process table, it is showing there is no items to show in this view nad its not showing any process.
Kindly advise ,
Regards -
Leopard folder icon with plus symbol
Does anyone know where I'd find a proper Leopard icon (that displays correctly at 16 bit) with a plus symbol, like the one you can add to the Finder toolbar?
That's a combination of a generic folder icon and a new folder badge icon, both of which reside in /System/Library/CoreServices/CoreTypes.bundle/Contents/Resources/. Combining them to do what you want is left as an exercise.
-
Removing "plus" symbol in Excel
Hello dear Labviewers. I need to calculate the values in excel, and can't do that with those "plus" symbols. Is there any way to remove them from Excel ?. The problem occurs because my scale can measure both positive and negative values in grams.
Best regards
OesenCurious: Is this program for the visually impared? Or for a monitor that is far - far away from the operator?
Just asking because it is super large...
I did not see where you write the values to the Excel spreadsheet. It must be in a different VI.
But I do have comments for the one you posted. Nothing serious, just things you pick up with experience..
Also, you do realize that you need to select the Start/Stop and / or Reset before you click on Measurement 4 so that they do the proper action, right?
I think you may need to investigate producer consumer architecture.
To learn more about LabVIEW, I suggest you try looking at some of these tutorials.
Attachments:
measurements.PNG 39 KB -
Hi,
Sorry about this post as I'm sure it's been done before but I just can't find it with Forum Search.
I just added a new keyword to a group of images and now the listing for that keyword has a plus symbol to its left in the Keyword Tags panel in the Library module. I'm just wondering what the '+' is for.
Many thanks,
PatThe + sign indicates that this keyword is set as a Keyword Shortcut. This keyword is now eligible to be used by the Painter tool or applying the keyword with the K keyboard shortcut.
-
No SAP instances in MMC console??
Hi,
I could't able to see SAP instances under console root-? SAP R/3 Systems?
It says below error in adminators event viewer.....any ideas to revolve this...
"The SAPPRD_00 service was unable to log on as .\SAPServicePRD with the currently configured password due to the following error:
Logon failure: the specified account password has expired.
To ensure that the service is configured properly, use the Services snap-in in Microsoft Management Console (MMC).
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp."
"DCOM got error "The service did not start due to a logon failure. " attempting to start the service SAPPRD_00 with arguments "-Service" in order to run the server:
{EFC29CC0-A03C-11D0-A1F2-0000F62893CC}"
Please help me why no instances are showing up in my MMC
Thanks
Manohar
Message was edited by:
Manohar Reddythen give a new password , also go to services and change the password for these user ..
for this go to run enter service.msc and enter
then you will get a windown , there find service SAPPRD_00 double click and go to LOg on tab , check there you can see the user which you changed the password there , if you see , change the password there to new password you just changed. also check whether any other services runnign under that user , if yes changes the password
thanks Prince -
SAP MMC console not working.
Hi All,
While opening the management console of the SAP,
I'm encountring an error given below:
"MMC can't open the file "C:\WINDOWS\SAPMMC.MSC."
This may be because the file doesnot exist, is not an MMC console, or was created by later version of MMC. This may also be because you don't have sufficientaccess rigths to the file.
Plz help
Thanks in advance.
Edited by: Mohnish Kapoor on May 17, 2008 3:07 PMProblem solved.
-
Disabled the SAP authentication on BO
Hi,
I´ve installed the sap integration kit on BO XI3.1 SP3, but the SSO by kerberos isn´t running. I´ve disabled the Sap authentication and the user can login with her windows user id and password.
How can return to use the SSO?
More thanksHi,
you have to check both.
You have to write back the settings you entered during the configuration of your WindowsAD setup.
These are Environment related to your Environment. Check the Documentation you used for the configuration.
Regards
-Seb.
Maybe you are looking for
-
For some reason the system is telling me my birth date is wrong when it's not and it won't let me proceed to reset my password. Can someone tell me how to get a "real" person from tech on line?
-
Can character encoding be predefined for certain pages?
Certain pages that I visit frequently require me to manually set my character encoding to Western (ISO Latin 1), both when my default character encoding is set as UTF-8 and Western (ISO Latin 1). As the pages that show up malformed are embedded in ot
-
Packaged app - image script problem
I have a packaged app which has several scripts to install the underlying database objects and seed the initial data. It also runs as script to install the images which are specific to the app, not the workspace. The script is created using the expor
-
Image size lightroom 4.4
i have been having ongoing issues with very small image sizes, each time I send (by e-mail) or upload direct (web-based) the company gets back to me saying the image size is way too small ??? I have a nikon d5200 (24 million pixels) and all shots wer
-
Overlaying SWF Asset with layer components - Strange behaviors.
Hi ! I am brand new at Flash Builder and Flash Catalyst. I have been spending most of my time in Catalyst at first and realized later on that I needed some of the nice features inside of FlashBuilder. I created a few FlashBuilder components and broug