Plusieurs apple tv en simultané

nous avons créer différentes zones de musique dans la maison (ex. haut-parleur dans le bureau, à l'extérieur, dans le salon) et chaque zone est reliée à sa propre Apple TV.Est-ce que je peux à partir de un appareil IOS envoyer ma musique à toutes les apple tv simultanément pour que les 3 zones jouent la meme musique en meme temps?

Probablemente debas revisar en Ajustes si tu Apple TV esta conectado a la tienda de estados unidos y no a la de tu pais.

Similar Messages

HT4437 Can I play a video from the remote app onto apple tv whilst simultaneously stra,ing music to other speakers via express?

Can I play a video from the remote app onto apple tv whilst simultaneously stra,ing music to other speakers via express?

Thank you for that, I wanted to make sure I was trying to replicate the same thing as you. Just tried it now, works fine for me.
Of note though, this will take a relatively well performing network to achieve this, I have such a network, if your network is not as good as it might be, you might encounter problems.
For the avoidance of doubt, I used the remote app on my phone to get my iTunes library on my computer to stream music to 3 of my Apple TVs, I then used the remote app to control another Apple TV and get it to stream a music video from my computer to it. Of interest I managed to do this while my wife was using yet another Apple TV (not with the remote app) to watch something else from iTunes on my computer.

Multiple apple tv's simultaneously playing on the same network and account

I have an office with 10 apple tv's hard wired to a router. We play different movies in each room. Randomly, different apple tv's will say they cant find the movie library? Could there be a problem with the way they are being shut down or the way itunes attached to the network is being shut down????

There is no specified limit. I have a location running 10, as long as your network can handle it, you're fine. You can use custom names for the apple tvs so there's no limitation there. The only limitation would be if they were all on the same accounts (itunes store, netflix, etc.)

Relire plusieurs rapports d'essais simultanément

Bonjour,
Je cherche à établir des statistiques sur un ensemble d'essais réalisés avec Labview. J'ai crée mon VI d'analyse afin de comparer les données entre elles ( valeurs max , écarts types etc...) mais je ne sais pas comment spécifié à ce VI qu'il doit faire l'analyse sur tout les essais inclus dans le dossier que je spécifie.
Merci d'avance pour votre aide.
Aurelien
Résolu !
Accéder à la solution.

Bonjour,
Pourquoi ne pas utiliser le VI inclu dans LabVIEW ?
Cordialement,
Pièces jointes :
exemple_dossier.vi ‏8 KB

Stream from Apple TV to 2 iOS devices simultaneously

Using a Mac, one can send iTunes music to more than one set of speakers if they are connected to an Airport Express and/Apple TV.
With the latest updates, is it possible to stream music from an Apple TV to the speakers connected to the Apple TV and simultaneously to one or more sets of speakers that are each connected to an Airport Express ?

You might want to use the feedback form to ask that this feature be included. Go to http://www.apple.com/feedback/appletv.html

Can I stream from the same iTunes account to 2 Apple Tv's in 2 different locations?

I currently have 1 Apple TV device at home. I'm thinking of buying a second one to keep in my office at work across town. My concern is this: my kids love streaming purchased movies and TV shows at home during the day while out of school. Will I be able to stream content purchased on the same iTunes account at the same time while I'm at work and my kids are at home watching on my first ATV device?
I know ATV isn't that expensive, but I would like to avoid duplicating purchases on a new iTunes account just so both locations can be streaming at the same time. Anybody know if this is possible?
Thanks ahead of time.

Yes. I would like to know if I can stream content from the apple store on both Apple TV devices simultaneously. Not from a computer, but items purchased from the Apple store on my first Apple TV device.
Thanks for the reply!

How many devices can I have attached to my Apple Id?

So heres the situation:
We currently have 2 iPads, 2 iPhones and 1 iMac PC between myself and hubby, and 4 PITA galaxy tabs for the kids.
Come Christmas we will be replacing the galaxys with iPad minis x 5 (5th kid is now old enough) and in the next month or so a new iMac Pro will arrive.
Will we be able to have all devices attached to the one Apple Id and share all purchases? OR will i need to create an account for the kids to share.
Im only asking now as it will affect the purchases i make in the next 2months on iTunes (i.e.: I'm not gonna go buying apps to keep my youngest happy on my iPad if they cannot then be transferred to his iPad, and the same with music for my preteen who has hijacked the "spare" iPhone for music.)
so where do we stand on this???
thanks

It is from my experience that iTunes handles computers and devices separately. For example, you are allowed to link up to five computers to any given iTunes account. But, you can have any number of devices (Apple TV, iPhone, iPad, etc.) to any iTunes account.
I personally have two iPhones, one iPod Touch, two iPads, and an Apple TV linked to my Apple Account while simultaneously having my Mac Mini, Macbook Air, and gaming computer attached to the account as well.

Ipod not connecting again, apple please read this.

First let me state that I made posts awhile back about my Ipod touch not being able to be recognized by itunes at all and just as a camera by windows. Now every single guide did nothing to help and the FEW people that posted had posted things I already did that did not help.
HOWEVER the version of Itunes that was prior to the one I just downloaded connected PERFECTLY with no issues.
But I just updates and wouldnt you know it, the connection problem is BACK. Apple please read this, the last version of Itunes had something different with how it connected to the Ipod...PLEASE bring that back, its so inconvenient not being able to connect to my own Ipod
If someone wants to post a reply that might help feel free...but everything on this website and even a few others not posted here have not worked, this is mostly me praying that Apple reads it...that tiny difference on how it connected made a huge difference with my computer.

Thanks. I worked out a simpler method of turning off the internet access - just switching off my wireless modem. Either way, this works and with the PC not connected to the internet, all three Apple devies will sync.
Thinking about it now, I had a similar problem a few versions ago which I recognised because with Home Sharing on and connected to the internet iTunes was trying to find files from someone in another hotel room who also sharing the hotel's wireless network. My devices would not sync then either. This seemed to be resolved with subsequent itunes upgrades until now ....
Thanks for the advice. Let's hope Apple's next 'update' actually updates itunes so it can sync Apple devices whilst simultaneously connected to the internet (not a big ask really).

Apple TV interference with my macbook pro and my wife's macbook

I recently bought the new Apple TV. My wife and I have same iTunes account. I have turned on home sharing only in the iTunes in my macbook pro. Still then, the apple tv's remote operation interferes with my wife's macbook and also, searches photos on her iPhoto in her macbook rather than searching on mine. Also, I try to play something on the TV with the apple TV, and simultaneously some other random video opens on my iTunes ! We both run the latest iTunes software. How can I fix this? It is kind of annoying...

You can do one of two things to stop unwanted interference from an apple remote:
1) Disable the mac's response to the remote
2) Pair a mac to a specific remote
Both are done easily at System Preferences->Security, the settings there are self-explanatory.

Extend wifi for media?

I need a an ethernet connection for my blue ray player, dvr, tv and soon to recieve apple tv. How can set the airport express to extend my wifi (linksys) and connect to these devices?

One last question if you dont mind...
If I connect a non-apple router with simultaneous dual band to my modem similar to airport extreme and then use this non-apple router as the main base and use the extreme in bridge mode as a wireless access point (bridge mode) to extend the range of my wireless (extreme connected via ethernet to main router). Then I'll connect the ps3 via ethernet to the extreme. If this non-apple router has uPnp capabilities so tha I can plug a usb hard drive on the non-apple router and be able to access the music/videos through the ps3 media server. Will that be possible? I know the extreme doesn't have uPnp capabilites so there is no way to access the hard drive files through the ps3 without using a computer and media server software if the hard drive is connected to the extreme. But what if the hard drive is connected in the main router which has uPnp and will work with the ps3 without the need for a computer to be on if the ps3 is connected to the extreme while the extreme is only acting as an access point.
Hope you understand what I'm trying to do here. Thanks.

HT204291 Is it possibly to have iTunes music play out of both the computer and AppleTV while using Airplay Mirroring for the TV?

Is it possibly to have iTunes music play out of both the computer and Apple TV while simultaneously using Airplay Mirroring to view the computer screen on the TV? Whenever I try, by clicking on 'computer' radial button for volume in iTunes Airplay, the TV automatically reverts to the Apple TV screen. I usually end up using preferences to 'bring back' the audio to the computert while leaving the picture on the tv, but this means i have to suffer from the inferior sound quality of my Macbook internal speakers.

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod
BTW this is the iPOd touch forum

Will Radeon x800xt support 30" ACD plus a 23"ACD

I have a dual 2ghz G5 tower with an ATI Radeon x800xt graphics card. Will the system support two Apple Cinema Displays simultaneously: a 30" plus a 23""?

According to ATI, the X800XT has one dual link DVI port (for the 30" ACD) and one ADC port (for legacy Apple displays). If your 23" display is the newer aluminum version, you'll need an adapter.
Hope this helps!
-macmatt
1 GHz TiBook, 768 MB RAM Mac OS X (10.4.3)

Three Monitor Support, Assigning Displays

I'm having an issue supporting three displays on my new Mac Pro (late 2013) running Mavericks 10.9.2. Specifically assigning content to specific monitors. This hardware configuration services my facilities high-end video editing suites. The primary software used is FCP X (version 10.1.1). I would like to assign my displays specific, static Display ID's because the ID's the OS is assigning are not what I want and conflict with output functions of FCP X. Below is an image of how are displays are setup. Currently, no matter which order I plug the display in, or to what Thunderbolt Bus, the display always defaults to this configuration.   What I need is Displays 2 & 3 to be switched. After the images are specifics about hardware and setup.
Connected to my Mac Pro are two 27" Apple Cinema Displays (Displays 1 & 3) which are display port, not the new thunderbolt version and a new Sharp 32" 4k Display (Display 2).   Also connected to the Mac Pro is a Sonnet Echo Express III-R Thunderbolt 2 Expansion Chassis (http://www.sonnettech.com/product/echoexpress3r.html) that contains an additional SSD drive, Audio Card and most importantly a Black Magic DeckLink Studio 4K card (http://www.blackmagicdesign.com/products/decklink/models). The DeckLink card is used in conjunction with FCP X's AV Output Function to output video to my 4K Display over hdmi. The Sharp 4k display is connected via display port to the Mac Pro so it can be used as a traditional desktop display and also connected to the DeckLink card via it's HDMI port so it can also display the output from FCP. Our editors switch inputs on the Sharp 4k display to the DeckLink video input while in FCP, otherwise they switch back to Display Port input so they can watch video from applications like QT Pro, After Effects, motion, webpages, etc.
The issue is that my Sharp 4k display is always assigned as "Display #2" so when I choose the FCP X option to "Show Event's on Second Display" my event window goes to the Sharp 4k display every time (like the bottom left image). This makes it impossible to display my Events on the left Apple Display while simultaneously displaying my Decklink 4k output to the Sharp 4k display.   The bottom right image shows the DeckLink output when switched to it's hdmi input which now hides my events. What I want is my Events window from FCP to be on my bottom left Mac Display, the main FCP X window on the right Mac Display and my DeckLink 4k video on the top display.
In iterations of this setup in the past I've had an older Mac Pro (2008). In that configuration there was a Black Magic Intensity Card driving a third display along with the third output (DVI) of our ATI Radeon 5870, in this case a 1080P Samsung TV. Our editors switched the input on the Samsung TV to view either the Mac OS or the Intensity output.   In this configuration of hardware, the TV was always Display #3 so we were able to have our video output on the Samsung while utilizing the two apple displays for Final Cut Pro's main window and secondary window.   It just always worked, which adds our frustrations when we upgraded to the new Mac Pro and hardware.
Here is what I've tried so far:
Plugging the displays into the Mac Pro in different sequences.   Briefly the 4k display may be desktop 3, but upon restart or an interval of time, it switched to desktop 2.
A tried plugging the displays into different TB busses on the Mac Pro.
To have the Sharp 4k display at 60hz I have to use the Sharp's display port, so coming out of the HDMI port on the MacPro is a not an option.
Further avenues of research.
Is there a command line solution to assigning monitors specific desktops?
Is FCP going to give us an option to assign windows to Third displays someday, not just the second.
Thank you. Any suggestions would greatly be appreciated. - Steve

I've updated to 10.1.2. No changes regarding three display support or the ability to "Choose" a Secondary Display.

Relecture de données

Bonjour,
Je cherche à creer un VI d'analyses afin d'établir des statistiques sur une série d'essais de qualification réalisés sous Labview.
Mon problème est : comment faire appel à plusieurs rapports d'essais simultanément afin de pouvoir être anaylsés par mon VI.
Merci d'avance.
Aurélien

duplicate
Steve M.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Vidéo-t'chats de l'été : présentations techniques et ingénieurs pour répondre à vos questions

DVD rip 2 audio channels if i stream from itunes

I ripped my DVD in mp4 5 audio channals, i see them if i open with quicktime
i copy this file into itunes library on imac and stream it to my Apple TV 3, but i get 2 audio channals output
i'm sure of that because my HIFI display audio channals of input signal and has only 2 channals
should i enable something in itunes? is just not possible?

Yes. I would like to know if I can stream content from the apple store on both Apple TV devices simultaneously. Not from a computer, but items purchased from the Apple store on my first Apple TV device.
Thanks for the reply!

Plusieurs apple tv en simultané

Similar Messages

Maybe you are looking for