PLW NTR prints one page, then a blank, and stops

I have a dependable 18 year old Personal Laserwriter NTR printer which has been running with a Dell running Windows XP for a couple of years. The printer is connected via a parallel cable to the computer. The printer has suddenly started printing only the first page of a multi-page document, then prints a blank and stops printing while the top light on the printer keeps flashing. However, if I open and close the feeder door, the next page and a blank will print, and the cycle repeats. Thinking that the printer driver "broke," I deleted the printer control program from the control panel and installed a new copy of Apple Personal LaserWriter NTR v2010.129 from the XP program. No change in the status. I have used Word, Excel and Wordpad with the same results. Any ideas as to the problem and how to correct? Thanks

This should help you out...
http://www.fixyourownprinter.com/kits/Apple/K53
Sometimes sticking solenoids will cause this issue too, but if it were mine, I'd install the kit I mention above first, and see if that fixes it.
Let us know how you fare.
Cheers,
Jason

Similar Messages

  • My hp 100 mobile printer will only print one page then quits. will not print all of the pages.

    my hp 100 mobile printer will only print one page then quits. will not print all of the pages.  i have rebooted, new install, and reset. still the same thing. when i look it shows that it is printing but there is nothing happing. i use this with my lap top.

    Hello colt1,
    Are you using Bluetooth or USB cable to connect to the printer?  Did you install from the disc, or from the online program?  When it sits there and doesn't print, does it eventually give error messages, lights flashing, etc.? 
    Thanks,
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Printer prints one page followed by blank page

    My HP printer will print one page followed by a blank page until the document is complete. Any suggestions on how to correct this?

    Try changing the 'Page Setup' > 'Format for' from 'Any Printer' to the printer you are using.

  • Printer prints one page, then stops

    I've had my printer for several years. Now, when I try to print a multiple page file, it prints one page and stops. I have to print each page individually. It never used to do this.

    Hey ,  Thank you for posting in the HP Support Forum.  I understand you're encountering a partial print job issue when using your HP LaserJet Pro CP1025 Color Printer.  I would like to help.  Firstly, I recommend you run the HP Print and Scan Doctor for Windows.  You can click here to install.  This utility might find and fix whatever's ailing your setup.  Additionally, if this approach doesn't help, I suggest working your way through the steps listed in this article from HP.  It should help rule out potential print queue issues.  Lastly, it won't hurt to clear out your temp files as directed below:  Clear Temp Folder:  Open your Start menu and in the 'search programs and files' box type %temp% and hit enter.When the Temp folder opens select Ctrl + A at the same time on your keyboardOnce everything is highlighted in the Temp folder select 'Delete' on your keyboard to delete the files within the Temp folder. No files and folders on your actual computer will be removed. This will only delete Temporary files. If a file is still be used by a program on your computer you will get the pop up to 'skip' the item.Once the Temp files are deleted close the windowOn your Desktop, right click on the Recycling Bin and select Empty Recycling BinPlease let me know the result of your troubleshooting by responding to this post.  If I have helped you resolve the issue, feel free to give me a virtual high-five by clicking the 'Thumbs Up' icon below and clicking to accept this solution. Thanks again for your post and have a great day!   

  • JS: How to make a script to print one page at a time and set print job name?

    What I want is to print one page at a time to the printer.
    Document.print(false, app.printerPresets.item(0)) almost get me there. But how do I get it to print page by page? There seems to be no way to set which page to print to printerPreset.
    Also, is it possible to change print job name from the default of using document name?

    >Is there any solution to this other than saving the document to a different name before each page print?
    Here is an altered and abriged version of the script that I use. I use print preset called "PS to PDF" in it, so you should change it to your own.
    if(app.documents.length == 0){
       alert("Please open a document and try again.");
       exit();
    var myFolder = Folder ("~/Desktop");
    var myDoc = app.activeDocument;
    var myNoExtention = getFileNameOnly (myDoc.name);
    var myPrintPrefs = myDoc.printPreferences;
    if (app.printerPresets.item("PS to PDF") == null) {
       alert("Preset \"PS to PDF\" has not been installed");
       exit();
    else {
       myPrintPrefs.activePrinterPreset = app.printerPresets.item("PS to PDF"); 
    myDoc.sections.everyItem().sectionPrefix = "";
    myDoc.sections.everyItem().includeSectionPrefix = false;
       var stop = myDoc.pages.length;
       var w = new Window ( 'window', 'Printing PS-files' );
       var pb = w.add ('progressbar', [12, 12, 300, 24], 0, stop);
       var txt = w.add('statictext');
       txt.bounds = [0, 0, 200, 20];
       txt.alignment = "left";
       w.show()
    for(var myCounter = 0; myCounter < myDoc.pages.length; myCounter++){
       curPage = myCounter + 1;
       pb.value = curPage;
       var myText = String("Page " + curPage + " of " + myDoc.pages.length);
       txt.text = myText;       
       var myPageName = myDoc.pages.item(myCounter).name;
       var cornumber = pagenum(myPageName);
       var myFilePath = myFolder + "/" + myNoExtention + "_" + cornumber + ".ps";
       var myFile = new File(myFilePath);
       myPrintPrefs.pageRange = myPageName;
       myPrintPrefs.printFile = myFile;
       myDoc.print(false);
    w.hide();
    alert("Done!");
    function pagenum(myNumber){
       if (myNumber >= 1 && myNumber <= 9)
       x =  "0" + "0" + myNumber;
       else if (myNumber >= 10 && myNumber <= 99)
       x = "0" + myNumber;
       else if (myNumber >= 100 && myNumber <= 999)
       x = myNumber;
    return x
    function getFileNameOnly (myFileName) {
       var myString = "";
       var myResult = myFileName.lastIndexOf(".");
       if (myResult == -1) {
          myString = myFileName;
       else {
          myString = myFileName.substr(0, myResult);
       return myString;
    Kasyan

  • LaserJet pro 400 only prints one page then memory low issue

    Hi
    Everytime  I go to print more than one page I get a memory low error.
    They pages are just black and white word docs or from webpages.
    Any idea why?

    @HPLaserJet400 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • Trying to print one page of a document in duplex - help!

    Hi,
    I've done a fair bit of work generating postscript from an OpenVMS COBOL system in the past, and while not an expert, have usually managed to produce something that works. This time I'm failing. Can anyone assist.
    The problem: I have a document which has to print from 2 trays.
    Tray 1: (Headed paper with blank background)
    Tray 2: (Special paper with writing on the back)
    Up to now it has been a simple simplex job, printing one page on headed paper and then page 2 (and more) on the special paper
    << /MediaPosition 0 >> setpagedevice
    (PAGE 1) show
    showpage
    << /MediaPosition 1 >> setpagedevice
    (PAGE 2) show
    showpage
    I have to add a sheet printed on both sides between page 1 and page 2  (A) on the headed side and (B) on the blank reverse.
    I tried
    << /MediaPosition 0 >> setpagedevice
    (PAGE 1) show
    showpage
    << /MediaPosition 0 /Duplex true >> setpage
    (PAGE A) show
    showpage
    (PAGE B) show
    showpage
    << /MediaPosition 1 /Duplex false>> setpagedevice
    (PAGE 2) show
    showpage
    This produced page 1 on headed, page B on headed with page A upside down on rear. then page 2 on special paper.
    I can get A to be the right way up by changing to
    << /MediaPosition 0 >> setpagedevice
    (PAGE 1) show
    showpage
    << /MediaPosition 0 /Duplex true /Tumble false>> setpage
    (PAGE A) show
    showpage
    (PAGE B) show
    showpage
    << /MediaPosition 1 /Duplex false>> setpagedevice
    (PAGE 2) show
    showpage
    but still I get page B on the front and A on the back.
    if I reverse thus:
    << /MediaPosition 0 >> setpagedevice
    (PAGE 1) show
    showpage
    << /MediaPosition 0 /Duplex true /Tumble false>> setpage
    (PAGE B) show
    showpage
    (PAGE A) show
    showpage
    << /MediaPosition 1 /Duplex false>> setpagedevice
    (PAGE 2) show
    showpage
    I get A on the headed side, but upside down, and B on the back (also upside down)  and B is stacked first so someone looking at it will see 1 B(upside down) A(upside down on headed), 2
    I just want  1 (headed)  A (headed), B (reverse of headed), 2 (special)
    Can anyone suggest the solution (to an HP Laserjet or 5550dfn if it helps)

    You need to alter the page orientations independent of the duplexing/tumble commands. you may be able to do this in setpage or setpagedevice, if not then reorient the specific pages using "moveto" and "rotate" PostScript commands within your pages.

  • A/R Invoice PLD is printing one page extra

    Hi all,
    We have designed a layout with tax break up for A/R invoice in SAP B1 2007.
    It has following sections
    Page Header height 348 with Area Height Adjustment Tick Unset
    Repetitive Area Header height 12 with Area Height Adjustment Tick Unset
    Repetitive Area height 120 with Area Height Adjustment Tick , Hide Repetitive Area If Empty and duplicate repetitive Area set.
    Repetitive Area Footer height 12 with Area Height Adjustment , Display Repetitive Area Footer On All Pages Set
    Page Footer Height 360 with Area Height Adjustment Tick Unset.
    It prints one page extra with blank space in the repetitive area.
    Help required.
    Thanking you
    Pradnya

    Hi all,
    I'm closing the issue. For now we solved the issue by re designing the page footer.
    Thanks.

  • Why does my printer take so long to print one page?

    i have an HP photomart C3180 all-in-one printer, everytime i hook it up to my mac and try to print something it takes about an hour to print one page, its super slow and its driving me crazy , im sure i have the right driver installed from apple for this printer, i dont want to install there CD cuz thats just more crap on my computer, i thought maybe apple's drivers would work. i have a Macbook pro, 10.8 if that helps in any way.
    thanks

    Get the latest driver from here:
    http://support.apple.com/kb/DL907?viewlocale=en_US&locale=en_US
    What kind of file are you printing? from what program? Does this happen with plain text files from TextEdit? Have you asked HP support for their help?

  • Customer Invoicing Printing First page line items blank

    Hi Everybody,
    Customer Invoicing Printing First page line items blank and it is printing it from the second page.  Please help me on this.
    Regards,
    Md Ziauddin.

    item No    Material No   Descripition  Putaway Bin   SUT  Vendor Batch  LE QTY  COA   Base UOM
    this how my line item should like, i am able to print only single line item for each item no.
    if i have 5 pallets for single line item, i want the same line item to be printed 5 times and this is what i am looking at

  • I have an HP Photosmart C4180 all in one printer scanner and copier, I can't figure out how to scan more than one page at a time and then send as a PDF file via email

    I have an HP Photosmart C4180 all-in-one, printer, scanner and copier.  I can't figure out how to scan more than one page?  It will only let me do one page at a time and then I have difficulty sending pages 1, 2 and 3 as one docuement.  Any ideas??
    Thank you, Jetteski

    Hello Jetteski,
    Hello Jetteski, Thanks for the post.
    Since you are running a MAC, check the below links for some excellent information on scanning.  Good Luck!
    http://goo.gl/M8Cl2
    http://goo.gl/cufK6
    http://goo.gl/OTQoR
    I work for HP but my posts and replies are my own....Thank you!

  • Printer prints one page

    When i print a document, it prints only the first page, then i try to print something else and it takes the paper in but doesn't print it. i have to cancel printing, printer returns the blank paper it took in for printing, i turn off my printer then turn it on again in order for me to print another page.. what is the issue ?? it only started doing this recently...
    thanks

    Hello there, Welcome to the Forums! I hope you enjoy your experience
    I understand your printer is now only printing one page at a time. I would like to offer my help where I can with this concern. Please try Resetting the Printer and if you are running a Windows OS, run the HP Print and Scan Doctor.
    If this information does not curb the problem, please respond to me with which OS you're running and which printer you have.
    Help to find which Operating System you are running:
    Which Windows Operating System am I running?
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Help to find your printers Model Number:
    How Do I Find My Model Number?
    Thanks for posting!
    Happy Monday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • How do I print one page at a time for a photobook .pse project?

    I am trying to print a photobook project one page at a time as I am using double sided paper that I need to turn over.  One other project I did asked me if I wanted both sides and would I do the turning myself, but this one doesn't.  I also wanted no border on the prints and it came out with a border.  It is also frustrating to have to wait for it to load 75 pages and then it prints them back to front.  Is this PSE or the printer software?

    Yes, you can print one page one at time as you want .
    In print dialog, select other pages and click on remove button.(refer to screenshot).
    For border click on more options and ensure check box is not selected ( refer to screenshot)

  • Can't print off my statements like before...have to print one page at a time instead of whole statement...what gives?  did up dates ...updates no good?

    Can't print off my statements like I did before...have to print one page at a time now...what happened?   never had proble  before....I did an update that they said was available...did that cause the problem...Apple???

    Hi Charlott...
    Open System Preferences > Print & Scan then select the Print tab.
    Click:  Open Print Queue...
    Delete all documents in the queue
    Restart your Mac, turn off the printer then turn it back on then try printing.
    Not sure which update you are referring to. If you have Lion installed and updated to v10.7.3, I doubt that had any effect on printing.
    BTW... when you post, please tell us which Mac OS X you have installed. Thanks!  

  • When I open the print command page it's blank

    When I try to print an online pdf document that I see on my screen and press the appropriate button to send the command to my printer (or use CTRL +P), I get the Adobe printer command page totaly devoid of words.  Just buttons with no labels.  The boxes for showing which pages are to be printed show but no words.  Pressing the button I figure must be the print command allows me to print the entire document, even if I only want one page. I have deleted Reader entirely and reloaded it.  Same problem.

    I am using Adobe Reader X, version10.1.2
    This is one of the two versions of the print command page I get.  I got this by using CTRL+P.  The fade in commands on hover commands at the bottom of the page of the pdf document would not work - no response at all.  I will see if I can create the other empty printer command page after I send this one.
    Thank you for responding
    Send a free greeting card  with SendOutCards:  I'll buy the card & the postage!Go to www.sendoutcards.com/42233
    The SOC Guy  (208) 861-9559
    Date: Fri, 27 Jan 2012 06:51:02 -0700
    From: [email protected]
    To: [email protected]
    Subject: When I open the print command page it's blank
        Re: When I open the print command page it's blank
        created by Ankit_Jain in Adobe Reader - View the full discussion
    Which version of Adobe Reader is installed on your system? Also, would it be possible for you to post a screenshot of the print dialog you are receiving.
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4168646#4168646
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4168646#4168646. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Adobe Reader by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Maybe you are looking for