PLW400 Speed drop and other issues
Hi..
I bought the PLW400 a while back and it's been working perfectly for months!.. but two weeks ago it stopped working.. so I turned it off and back on but still didn't work. So I did a full reset and reconfigured everything and it finally worked.. but the speed dropped from 20mb to 1mb!! and every few hours it stops working and appear to have lost connection or sometimes it works but with a super slow (dial up like) speed! and sometimes when it stops all of the sudden I see the LEDs blinking slow or turned off!
I've tried to plug it in different places and it was all the same, but when I tried plugging it in next to the main device in the same room I got 10mb.. better but still! my original speed when connecting directly to my router is 40mb!! What's going on here?
Has anyone else experienced something like this? can someone please help me?
Hi Husam,
Thank you for your questio. However this community is for Cisco Small Business Products and the PLW400 is a Linksys product. Here is the area that may help you further with your question. http://support.linksys.com/en-us/support/powerline/PLW400
Regards,
Cindy Toy
Cisco Small Business Community Manager
for Cisco Small Business Products
www.cisco.com/go/smallbizsupport
twitter: CiscoSBsupport
Similar Messages
-
Nice to see 13" retina but it has only Intel HD Graphics 4000 and does not have NVIDIA GeForce GT 650M with 1GB of GDDR5 memory card. How it will affect the speed, performance and other things compared to 15" retina where NVIDIA GeForce card is available.
The 15" Retina's will have better performance than any 13" Retina. Not only do the 15" machines have dedicated GPU's, but they also have quad-core processors, whereas the 13" Retina's only have dual-core processors.
-
Elite Pro, CMSS-3D not working and other issues after driver update
DElite Pro, CMSS-3D not working and other issues after driver update <font face="arial,helvetica,sans-serif" size="4">Elite Pro CMSS-3D control (on I/O console)no longer controls CMSS-3D.
The only time it works is if the original drivers are installed from the installation CD.
ANY other drivers stop the control on the Elite Pro I/O console from having any effect on CMSS-3D.
Also at one time when I cotrolled volume, CMSS-3D(original drivers), EAX and Crystalizer from the Elite Pro I/O controls then I had on screen display of said control that was being moved(on I/O console).
Now regardless of what drivers are installed, there?are no longer any on screen indicators.
The indicators looked like the ones that show when using the remote controller.
Anyone have any ideas?Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
http://rapidshare.com/files/25244022/[email protected]7.254.6.0 -
Broadband Speed dropped and wont come back
Hi, I need help and advice please.
Background info first though, so please bare with me.
During last July 2011 I was fed up of very low speeds and managed to get a BT engineer out to check the wiring etc... He did a great job by finding a badly insulated cable between myself and the Cabinet in our village. He also changed our master socket to a newer version.
Over the next few days my broadband speed went from 0.74mb download to 1.95mb download. Fantastic!
This speed has pretty much been a consistent rarely dropping below 1.7mb and at times has even gone up to my highest recorded of 2.46mb. I thought this was brilliant, I could watch iPlayer no problems and xbox live was even bearable (most of the time).
The big problem where I live is sometimes we have power cuts. Sometimes lasting hours but mainly just for seconds. Even so it switches the BB router off. (I know, but not my fault)
When we had the freak snow fall the other month problems started to raise their head. The computers in the household found issues connecting to the router and to resolve this BT BB Helpdesk kept advising me to reset router to enable connection. After connecting new ADSL filters the speed returned but connection issues continued.
BT supplied me with a brand new home hub 3 which I connected thinking it would give me my 2.4mb speeds again. Oh No. To be fare I think I was getting 1.95mb but I wanted more, as most people would. Why cant I get 2.4mb most of the time I have had for a few months.
Anyway I contacted BT who were kind enough to send a BT engineer out. He Said to me the Broadband speed is put out at the exchange (4.5km) at 8mb and comes into our village at between 3mb and 4mb. He detected no fault on the lines and spent the next 3 hours renewing 'D' and 'E' I think side of cabling (found this out later). He mentioned the noise was high but did something to lower it. On leaving he said I had 2.5mb and was confidant it would rise to 3mb.
Great not drastic but should give me 250kbs to 50kbs extra.
The day he was at my house we had 2 short power cuts followed by another couple some days later. This has not helped I'm sure.
NOW TO THE ISSUE.
My download speed since that day has not gone above 1.46mb download and every time I speak to the call centre they tell me my line is only capable of 2mb therefore 1.46mb is within acceptable range.
I am so tired of explaining that I was capable of receiving 2.4mb some 2 months ago yet now since the new hub 3 and line fiddling I am only capable of a 2mb downstream - 1.46mb DLS.
I know I have to wait 3 - 10 days but with power cuts its a nightmare, and they are so adamant about my 2mb downstream limit What the hell has happened.
Here is a link to my recorded (Speedtest.net) data over the past 11 months showing actual proof of receiving 2.46mb:
http://www.speedtest.net/results.php?sh=19a6b38248773feaa954bcf8e17ae768&ria=0
And here is my BT speedtester data:
1. Best Effort Test: -provides background information.
Download Speed
1.38 Mbps
0 Mbps
2 Mbps
Max Achievable Speed
Download speedachieved during the test was - 1.38 Mbps
For your connection, the acceptable range of speeds is 0.4 Mbps-2 Mbps.
Additional Information:
Your DSL Connection Rate :2.21 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
IP Profile for your line is - 1.5 Mbps
My home Hub data:
Line state:
Connected
Connection time:
0 day, 17:16:04
Downstream:
2,208 Kbps
Upstream:
448 Kbps
ADSL settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
9.3 dB / 15.0 dB
Line attenuation (Down/Up):
56.5 dB / 31.5 dB
Output power (Down/Up):
18.1 dBm / 11.9 dBm
FEC Events (Down/Up):
12650 / 48
CRC Events (Down/Up):
50 / 17
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
HEC Errors (Down/Up):
289 / 10
Error Seconds (Local/Remote):
0 / 0
Please Help me I know I've had better than this but all the numbers point to the fact I can no longer have them. Why?
Many thanks
Jon
Solved!
Go to Solution.Hi JONNYYOUNG,
I'm not educated enough to help but it mat reassure you, as it did me, to know your circumstances are not unique.
Your story sounds very simialr to my experiende last November, speeds and line length being very similar. An engineer said there was noise on my line so he switched me to another pair. Did the engineer do that for you too ? Net result my speed dropped from ~2.3 to ~1.4Mbps.
Fortunately a 21CN upgrade at my excahnge has brought my speed back up to ~2.4Mbps.
I'm sure imjolly, john46 and maybe a mod if you need it will sort you out as well as they did me.
Good luck,
dfenceman
Best regards,
dfenceman -
BT Infinity 2 Speed dropped and now doesn't recove...
I've had BT Infinity 2 for a couple of years now and it has been working flawlessly. I use a Fritz!Box 7390 router and have had no problems at all with it.
That is until mid-January 2014 when I noticed by connection speed dropping down to less than 40MB/s and about 9MB/s on the upload. Now some may say that this is fine, and it does exceed my promised speed of 31MB/s by BT, which is true. However for the last two years I've constantly had speeds of 55-70Mb download and upload speeds of 13-18MBs.
Speedtest.net is reporting: 40Mb download and 10.3 Mb upload.
I do a lot of file transfers and remote server work so I notice the speed drop.
The Frtiz!Box reports some interesting statistics. Currently it is showing this:
Receive Send
Max. DSLAM throughput 44000 12000
Min. DSLAM throughput 22000 6000
Attainable data rate 46200 18176
Current throughput 43984 12000
Now I know for a fact that prior to this issue the Fritz!Box has been reportinging a Max. DSLAM throughput of 79000 and 20000 with an attainable data rate of 81000 and 24000 respectively. I suspect that there is something wrong either at the exchange DSLAM or with the line in between.
From the above figures it suggests that I am only obtaining BT Infiinty 1 speeds on my line and not Infinity 2. However my account says Infinity 2 and checking with the BT guys they report that there is no problem because I'm getting more than that promised 31 MB/s.
Frustrating as I know this has changed in the last three weeks. What's more suspecious is that I have the Fritz!Box sete to disconnect/reconnect every day at 4am. This means that every day normally I get a varying speed e.g. one day it might report 60/14, the next 55/13, etc. However since I've noticed this problem the line speed never changes, constantly reporting 44/12 with no fluctuation at all. This has been happening for about 3-5 weeks.
I just wondered if there is anything I can do now to find out where or really if there is a problem. BT 150 telephone support in India don't want to know because they say I'm getting more than 31Mbs.
Thanks,
Gareth.This is the full page of DSL stats from the Fritz!Box:
Receive Direction Send Direction
Max. DSLAM throughput
kbit/s
44000
12000
Min. DSLAM throughput
kbit/s
22000
6000
Attainable data rate
kbit/s
45036
16288
Current throughput
kbit/s
43984
12000
Seamless rate adaptation
false
false
Latency
8 ms
8 ms
Impulse Noise Protection
3
4
G.inp
off
off
Signal-to-noise ratio
dB
8
7
Bitswap
on
on
Line attenuation
dB
13
2
Profile
17a
G.Vector
off
off
Carrier record
A43
A43 -
Huge speed drop and connection problem when answer...
About 2 days ago my internet speed dropped hugely and it's almost now unuseable. I've run a speed test and the results are below. Any idea on what to do to get this resolved?
Also, every time I answer a call or disconnect a call the broadband connection is los which is very annoying! Again, any ideas about thats causing that?
Test1 comprises of Best Effort Test: -provides background information.
Download Speed
102 Kbps
0 Kbps
250 Kbps
Max Achievable Speed
Download speedachieved during the test was - 102 Kbps
For your connection, the acceptable range of speeds is 50-250 Kbps.
Additional Information:
Your DSL Connection Rate :2432 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 135 KbpsAndyMc what you have supplied is the wireless connection rate between the router and your wireless adapter this is not related to anything from Bt. This is the connection rate which I am sure would be related to a channel issue more than the connection dropping. Here is a link to the help site that will assist especially the link with regards changing the wireless channels. http://bt.custhelp.com/app/answers/detail/a_id/11381/c/346,1887,1889
Make the change and then disconnect and reconnect the wireless and notice if the connection rate changes. I am sure you will get some interesting results. A good little tool you can use is an utility called inSSIDer just do a google search and install that, it will show you where there may be a conflicting channel issue, the non shared channels are 1.6.and 11. If you need to diagnose the dropping connection problem then that is a different issue to the connection one. -
Connection speeds dropped and noisy line
Hi there,
We will be calling BT tomorrow about this as we have had some crackling noise on our phone line over the past few days and the noise margin has shot up and the speed dropped, broadband connections keeps dropping randomly and sometimes the speed drops to 2mb instead of the usual 18-19mb I get.
When I plug the phone directly into the socket I hear no noise on the line at all, when I plug the phone into the ADSL adapter I still hear no noise, when I plug the router into the ADSL adapter I start to hear noise when the router starts to connect up.
Dont have a replacement adapter tonight to test this theory so thought I would throw it out there for experienced users to comment on.
Thoughts?
As I said before my noise margin has went up quite a bit since this issue.
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 00:00:52
Downstream:
13.35 Mbps
Upstream:
891 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Fast
Noise margin (Down/Up):
15.9 dB / 12.5 dB
Line attenuation (Down/Up):
14.9 dB / 10.6 dB
Output power (Down/Up):
19.7 dBm / 12.4 dBm
FEC Events (Down/Up):
0 / 0
CRC Events (Down/Up):
469 / 266
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
517 / 443
Error Seconds (Local/Remote):
38 / 124
Solved!
Go to Solution.The noise margin will normally fluctuate but only very small amounts. You should find that noise margin is higher about lunchtime and as it get dark and more use the phoenline then noise margin starts to reduce and get lowest about 11/12pm and then the cycle starts again
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
C309g (CD055A) no black and other issues..
Hey all.. Not sure which thing to post about first, so in random order, here goes....
I bought a used printer listed above in the subject.. It needed a new power supply, and ink, but seemed to be great. I purchased the regular size cartridges except the black which they had in XL size. I printed a total of 3 test pages (set up on three computers), I printed one 8x11 photo via bluetooth from my phone, and my wife printed 2 8x11 photo's from her PC. All 3 8x11's were on regular paper. Oh, and we printed one of the dots built-in pages.. So if you're counting (and I KNOW I am), that is a total of 7 pages. Additionally there may have been one demo page (possibly a total of 8 pages, then!), can't remember if I did that demo page on the previous owners ink or if I did one on the new ink I bought (previous ink was old/empty). Oh, and technically there was an alignment page, so final total 9 pages. After those nine pages, my magenta and yellow ink were both down to around 65-75 percent. It sat a week without use (literally, 7 days). Today I went to print some regular text (black only) and it shot out at me blank pages. I tried a few more times, and nothing but blank pages. Tired of running back and forth, I printed a built-in "school paper" page or wide ruled paper (heh, how cool in a pinch is THAT feature!). It printed perfectly - Course it's blue and magenta, no black..
So it's been awhile since I used inkjet, but I quickly rememberd the handy utility to clear/clean printheads. Ran that. It failed, assumedly for missing black (it had the gray'ish photo black, but not 'black' anywhere on the sheet. After the cleaning failed, I removed the black, and all the colors. Seems to be black in there (as should be!) I dabbed the bottom with a paper towel gently, it turned black... So I put it in, and it whirred away doing it's thing to re-align, and then it told me the shocking news that my printer was low on ink, and showed all levels to be well, I suppose about 10-15 percent remaining (think SMALL skinny lines). Now I know this is an estimate, but I'm concerned from the get-go that after only 9 pages it was down to 65%!!
Before I found the forums, I found a site that recommended removing the ink cartridges, and removing the print head itself and soaking the bottom portion (up to the wire meshes, slightly covering them, but not the entire thing) for awhile in IPA (isopropal alcohol) and then dipping them in fresh a fresh batch to 'rinse' then gently hitting them with compressed air via air compressor (or canned air, I suppose, have an air compressor) to remove any debris and get the remaining alcohol off/out. I then let it sit several hours to 'dry', which - it was probably ready immediately given the properties of IPA, but didn't want to chance it.. Re-inserted it and the ink, and..... SAME THING.
All the ink is official HP ink (since I'm sure that q is coming), was purchased from a big box retailer who ya all know and love or hate (no need to name drop).. I'm wondering if...
1. My ink, though coming out onto the paper towels could be bad/defective. Given the really fast drop in the levels of ink, and the issue with black not seeming to print, seems possible?
2. Should I try the boiling the print head - err not boiling it, but sticking it in recentyl boiled water, and give that a try? The guide that was posted here somewhere showed doing that, with IPA added to the water as an option. Is it possible the IPA didn't break up whatever gunk might be blocking the black, that boiled water might break up? Does that make sense, or would the IPA have broken it down?
How do these print heads work exactly, or is that the big company secret? I mean, is there a tube that goes for the inlet of black to the gold area underneath, cuz it's not directly under the gold like old fashioned cartridges used to be.. Is there any way to open up or access that area like, under the metal screens to get in there with a pipecleaner or something maybe, or something?
And, for bonus points (lol) Why does HP assign two names to their printers?? IE C309g (CD055A), If my printer is the C309g, why is it ALSO the CD055A?? SO confusing and un-necessary..
Thanks for your time and patienceI've had a similar problem with black not printing, though my printer is a B8550. I bought new and have used it fairly lightly I'd say, but after only a couple of years it suddenly stopped printing the photo black (it has separate cartridges for black for photos and black for text, etc.).
It prints on regular printer paper just fine using the other black--but not a drop prints of the Photo Black (yes, it's full). Since I've cleaned the print head, and even bought a new one, and a diagnostic print shows absolutely no trace of the photo black, I'm fairly sure the printer itself is at fault. It's sold as a 'Photosmart' printer, meaning it's intended to use to print photos--large format too--so without photo black it is a huge brick as far as I'm concerned.
I've begun to notice from these forum posts that there is an issue with HP and black ink, or at least whatever controls black for photo papers in their inkjet printers. If I'm not mistaken both yours and mine use the 564 cartridges, so maybe that suggests a common factor in such printers that is the culprit. I suspect HP knows there is a problem, either with the hardware or firmware, and I wish they would do right by us. -
Q10 speed-dial and texting issues
Hi there,
I am setting up a q10 for my wife, and i also have one.
I cannot do speed dial on my q10. I have two brand new identical devices and one can do speed dials, and one cant.. I can set up the speed dials, but it doesnt activate when i do a longpress.
Also when i longpress a number in my call log it doesnt give me the option of sending a text, whereas my other devices does.
Also when i play a song it deosnt give me the choice to add that song as a ringtone whereas it gives me that choice and other choices on my other device.
My questions are:
Is there a way i can restore some defaults to have these features, or change options so i can have these same features that i have on my idetical device.
or is the second devices faulty> Seems odd that it would be as its brand new.Hi Husam,
Thank you for your questio. However this community is for Cisco Small Business Products and the PLW400 is a Linksys product. Here is the area that may help you further with your question. http://support.linksys.com/en-us/support/powerline/PLW400
Regards,
Cindy Toy
Cisco Small Business Community Manager
for Cisco Small Business Products
www.cisco.com/go/smallbizsupport
twitter: CiscoSBsupport -
Ios8 copy and paste / Digital AV Cable / internet dropping and other bugs!
hello -
so like everyone else else there is a number of bugs I am running into. so here's my list- Yes I've tried to restore, so I am praying that the ios8 update will contain these fixes:
- copy and paste doesn't work between applications- but it's sporadic! (issue originally found when copying from a webpage to an email, then into notes from another webpage)
- my Apple lighting to digital AV cable doesn't "read/transfer" to the TV
- internet randomly drops for a few seconds to minutes for no apparent reason the it being an iPhone 6
- Facebook and other internet heavy apps like Associated Press are extremely lagging or give me an error unable to connect to server
- randomly freezes while taking pictures or taking notes- it won't even let me shut down
- voicemail set up doesn't work
I am sure there are more bugs but haven't seen them or I've forgotten about them! If anyone else has these problems please check the box that you do have the same issue. Also any known resolutions would be appreciated!
With Joy,
ChristinaAnother file?
Do you mean folder? Inside or outside iPhoto?
I'm trying to copy photos to a Sony Digital Photo Frame.
Select the photos you want to use.
Export them to a folder on the Desktop. File -> Export
Add that to the device.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue. -
Printing in OsX 10.6.x and other issues
I just updated from a trusty G5 running OSX 10.4.11 to a 2010 Intel iMac running OSX 10.6.8 and can't for the life of me get my Epson 3800 and 595 printers to work. I've downloaded new drivers and also resorted to a clean install but no luck. The other issue is that when I run permission repairs in Disk Utility I get extensive repairs only to have the same thing happen again the next time I run the utility. Suggestions please!
Thanks for the permissions info. It' a bit disconcerting that in Snow Leopard the Disk Utility just seems to continue repairing things that were supposedly fixed the last time I ran it. In Tiger a second go with Disk Utility would usually come up clean.
Still having printing problems. Software update supposedly installed new drivers but neither the Epson 595 or 3800 will print. The error message in the driver window is:
Error:/System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMana ger failed
Not sure, but it sounds like something in the OS dropped the ball.
Any input appreciated. -
MBP a1226 has been acting odd on startup. (and other issues)
Today, every time I've powered the machine on, the fans run at max speed and iStat reports my avg temp at nearly 82C, which is sorta hot and unusual for my almost three year old MBP.
This is the latest in a series of problems I've been experiencing lately that may or not be relevant. First, I'm having that trackpad and keyboard issue detailed in that big topic. As of now, pressing down on that ribbon fixes it. Second, I started up my computer one time to find that OS X was reporting a battery issue. The message was something like "Service battery." I just purchased the battery brand new, from an Apple Store, last September or so. After a reboot, the message went away and hasn't come back since.
So as far as questions, is the initial issue something to worry about? Also, should I consider talking to Apple about my battery?You might want to open Activity Monitor and see if there is some hung up process running in the background which is hogging the CPU and causing the heat and fan noise. Be sure to select "All Processes" at the top.
It wouldn't hurt to have Apple evaluate your battery--I believe that here is a stress test they can run for you to be sure the battery is functioning properly.
Good luck! -
Failed Hardware Scan and other issues E440
Hi all,
This is probably more rant than anything, but I wanted to give a heads up to others too.
I have a ThinkPad E440 that is a year old. From the very first time I turned it on, there have been issues. The first hardware scan (via Lenovo Solution Center - LSC) showed a warning for the Intel Dual Band Wireless-AC 7260 Local Connection Test. There were also tons of System Events that always show up in the "Configuration History" part of the LSC. You can look at the calendar and tell exactly which days I used the computer because there will be System Events generated each day. Things like app crashes and failed drivers.
In July 2014, I got the first warning for the 16 GB SSD - the SMART Short Self-Test. By February this year it showed as failed for each hardware scan (these were initially set up to run monthly).
Also the whole time I've had it the touch screen would just stop working at some point and I would have to reboot to get it working again.
I finally called Lenovo on March 30th, before my warranty expired. When I called that time, I didn't realize the hard drive failure was the SSD. So they sent me a new 500 GB drive. I also added the other things into the case when I talked to them. For the wireless issue they suggested making sure the driver was up to date. I did this and let them know when I called back that it was up to date and still having the warning. So I called them to tell them to tell them about the wireless and also that I realized it was the SSD having the failure, not the main drive. The first case had already been closed even though none of the other items were addressed.
So they opened another case (this is #2). They said to mail them the laptop since the wireless issue would probably be on the board and it wasn't something I could fix myself. They sent a box with a prepaid overnight shipping label. I was very sick for a few days so I sent it back to them on April 10th (a Friday). Via UPS I saw it was delivered on Saturday. Work was performed on it Monday, April 13th and sent back to me that very day. I received it on April 14th. This part of the service has been excellent - very fast response.
Being in IT, I included a letter with the laptop that outlined the issues that should have been in the case. I also printed the hardware scans and what the system events looked like.
When I got the laptop back, the sheet inside said they had replaced the Speaker because of Distorted Sound. This was not even on the list even though I had noticed it. I didn't even power up the laptop before calling them again - yes, I was furious! Plus our power was out...
So this was noon on the 14th. They opened case #3 and sent me ANOTHER BOX so I could send it back.
After our power came back on the 15th, I powered up my laptop. I opened the browser (I have it set to restore the previous session) and there was a sexually explicit video on YouTube. I opened the other browser and there was a different video on YouTube. So this person was watching YouTube instead of fixing my laptop. I looked through both browser histories and there was quite a bit of activity while my laptop was at the repair center... I ran the hardware scan - still failed and a warning for the wireless. They really hadn't done anything.
I also found two pictures of the repair person in the recycle bin...
So I called back. I was LIVID! They opened another case (this is #4). And sent me ANOTHER BOX. I finally learned the other day that once a case is opened, it cannot be edited or added to at all. Instead, they close the other case and open a new one. I guess their turnaround time for closing cases is excellent! I've never seen a system like that - and I've used a lot of them.
I got a really nice, patient fellow on the line. He took all my info (again). I emailed him the pictures, screen captures of the YouTube videos, the letter I had sent - everything. He entered as much into the new case as he could - he talked to one of the supervisors to make sure he did it right. Somehow he flagged it so that the laptop would get more attention (time) at the repair facility. He also opened a separate case (an escalation ticket?) for a supervisor to call me regarding the person's conduct at the repair facility. He said they would call me that day. (It's now the 25th and I've never heard from anyone)
So, he sent me ANOTHER BOX. I've built up quite a stack of them.
Our power was out AGAIN from the 17th through the 19th (don't get me started).
I noticed a hardware scan had now gotten a failure on the main hard drive. So I called them on the 21st to add this to the case before sending the laptop back. The girl said they can't add anything to an existing case or edit it at all once it's opened. She would have to open a new case and SEND ME ANOTHER BOX. I told her to forget it because I was ready to send it in and didn't want to wait for another box. I also asked for a status on that "escalation case" where the supervisor was supposed to call me. In order to do this she, yes, wait for it, had to open ANOTHER CASE!! So they would know I wanted a status. I'm completely dumbfounded.
So I sent it back on the 21st. This time I practically wiped it. I had already removed all my files the last time, but I had left my bookmarks and browser history intact. I set up a guest logon with admin privileges. I updated my letter and printed off more stuff to include with the box. On one sheet I had only the case number, the serial number and machine type. On another sheet I had "DO NOT SEPARATE THIS PAPERWORK FROM THE LAPTOP" and the case number. I put this sheet on top (The guy on the 15th said my letter and stuff may have gotten separated from the laptop once it was delivered to the repair facility). I used a ton of staples so it would all stay together. I included in my letter the failure on the main hard drive and asked if they could look at it. I wrote about having to open a new case if I wanted to include it.
They received it on the 22nd. A nice gentleman from the repair facility called me that day asking about the password. that. was. written. on the sheet they have you fill out. I told him what happened last time and also mentioned the hard drive failure and asked if he could look into it. He said they would.
I received my laptop back yesterday morning.The sheet that came with it said they had "replaced the following parts to complete the repair of your laptop."
Part Description Symptom
IMAGE Replaced due to engineering change
System board Network card error
Hard disk drive Network card error
ECA-WIRELESS <no symptom listed>
There was also a sheet saying they had installed a factory preload of software and I needed to install Lenovo and Windows updates.
When I booted it up, the first thing I noticed, in the lower right corner was:
Windows 8.1
SecureBoot isn’t configured correctly
Build 9600
I ran a hardware scan. Well, I tried. It stopped part way through and said it finished successfully but most of the tasks showed up as cancelled. I tried to run it again - issues - rebooting ensued. It said the LSC wasn’t available and that I should try again or reboot.
Tried several times. Then got what I guess is the new BSOD - kinder, gentler:
Your PC ran into a problem and needs to restart. We're just
collecting some error info, and then we'll restart for you. (xx% complete)
If you'd like to know more, you can search online later for this error: DRIVER_CORRUPTED_EXPOOL
Even though the LSC said my Lenovo files were all up to date, I ran the Update. And first I had to download a new version of Update. Then I downloaded all of the Lenovo updates and installed them (there were quite a few). The BIOS update failed. While I was doing the Lenovo downloads, I got a light blue screen but no text (I was out of the room so I'm not sure what happened). Did CTRL-ALT-DEL and it shows only IE and Task Manager as applications that are running. Could not “Switch to” IE. Hitting window key to go to start didn't do anything. So I had to restart.
By 3pm yesterday there were 34 system events in the configuration history.
I ran the hardware scan again after I updated the Lenovo files, and you guessed it! Failure on the SSD (SMART Short Self-Test) and warning on the wireless. Nothing had changed. Except hardware scan is acting different than it did before I sent in the laptop for repairs. When it finishes, it instantly closes and just shows 100% complete. When I click on "see last results" it shows a screen called
Log Information,
Canceled 04/24/2015 n:nn pm
You have not done a hardware test on your computer
And the calendar in LSC only shows the very first hardware scan I did on Friday. Even the hardware scan screen shows the date and time of the last scan. It also shows the error code. In order to see exactly what is failing, I have to sit there and watch it very closely and snap a picture of the screen as soon as the error (or warning) shows up.
When I would try to run Windows update, it would hang up PC Settings. I couldn't even kill it using task manager because it didn't show up as a task. During this, I got a flag saying the firewall wasn't turned on. I tried to turn it on, but clicking on Turn on Windows Firewall didn't do anything. I tried to setup my Microsoft account but that just hung too.
I ended up running Windows Update FOUR TIMES to get all the updates installed. Every time I ran it, it said "Done!" and I would run it again and more would show up. The last time was this morning.
At some point, the error about SecureBoot went away.
Then, I created a bootable BIOS update disk. Following the ReadMe instructions, I went through ThinkPad Setup and verified several values. Of note:
Secure Boot was DISABLED. According to the ReadMe file, this should be ENABLED in Windows 8.1. I enabled it.
Under Startup/Boot, according to the ReadMe that came with the BIOS update, UEFI/Legacy Boot is supposed to be set at UEFI Only for Windows 8.1. Mine was set to "Both". I changed it.
In Startup, OS Optimized Defaults was DISABLED, even though it says right there (and in the BIOS update ReadMe) it should be ENABLED to meet Microsoft Windows 8 Certification Requirement.
After these updates, I flashed the new BIOS.
Then, I ran hardware scan again...
Now I have TWO failures on the SSD: Random Seek Test and SMART Short Self-Test. Great.
In the Event Viewer (that I recently discovered), it says my disk has a bad block. It just says The device, \Device\Harddisk\DR1, has a bad block. I assume this is the SSD...
There are 867 events in the event viewer - Critical, Error, and Warning...
Fifty-two of these are from October 7, 2013 - before my little laptop was a glimmer.
The rest are from when Lenovo had it and yesterday and today.
64 of them are the disk error.
341 are from DeviceSetupManager. 65 of those are from failed driver installs. 69 are for not being able to establish a connection to the windows update service. 64 are from not being able to establish a connection to the Windows Metadata and Internet Services (WMIS).
3 times it's rebooted without cleanly shutting down
60 of them are from Service Control Manager and say The TDKLIB service failed to start due to the following error: The system cannot find the file specified.
One of them says {Registry Hive Recovered} Registry hive (file): '\??\C:\Users\Default\NTUSER.DAT' was corrupted and it has been recovered. Some data might have been lost.
16 are warnings that various processors in Group 0 are being limited by system firmware.
12 say the certificate for local system with thumbprint <bunch of hex numbers> is about to expire or already expired.
108 are warnings for failure to load the driver \Driver\WUDFRd for various devices
16 are application errors
One is for the computer rebooting from a "bug check"
15 are for name resolutions timing out after none of the configured DNS servers responded.
10 are for SecureBoot being disabled.
14 for services terminating unexpectedly
15 are for WLAN Extensibility Module has stopped
61 are for applications not being able to be restarted because the application SID does not match Conductor SID
12 are for activation of CLSID timing out waiting for the service wuauserv to stop
So, I'll call them on Monday and open. a. new. case (#5?) - but really 7. And get A NEW BOX.
I'll keep you updated!Hi amycdero and welcome to the HP Forum,
I understand that you are having scanning and printing issues after upgrading to Mavericks OS X v10.9.1. I will try my best to help you resolve this issue.
In this document for Mac OS X: Scanning Software Does Not Open or Stops Responding are steps the may help you with your scanning issue.
This document for Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems should help with the streaking printing issue.
I hope this information is helpful. Please let me know.
Thank you,
I worked on behalf of HP. -
Twist charm swipes not working and other issues
Hi all,
I just got a new Twist a few days ago and am having some issues with it. I got it on line from Staples who have a very limited return policy so I need to get these problems resolved quickly or will have to return it in a few days. I really like it a lot and would hate to return it and deal with the replacement, double charge on my CC until they get the defective Twist and refund the bucks, not to mention the shipping hassles.
I've installed all updates including the Lenovo updates, updated the Bios, did a factory refresh and went through the update process all over again and also calibrated the screen.
So the problems I'm seeing are the swipes from top to close an app, left to view open apps, and right for the charms will intermittently stop working but you can still tap on apps to open them and slide the app screen left \ right.
The other issue is that occasionally the app screen will shrink and expand or open an app without being touched, I would have it on a stand in tablet mode and watch it expand \ contract, and suddenly bring up an app like Remote Desktop. I contacted Lenovo support they said it was a hardware issue and recommended returning it but I'm reluctant to do this and hope there's a solution for it.
I did notice was that moving to portrait mode would usually work to bring back the swipe functionality. Digging into it a bit more, I think I found the root cause, when it is in tablet mode with the keyboard folded back, the keyboard isn’t getting fully disabled, watching it closely I noticed that a cursor would sometimes appear \ disappear momentarily.
Any thoughts or advice would be GREATLY appreciated!!Chris Ibsen wrote:
I still have access to the folder, as I still have the external drive.
okay, let's make really sure it is the entire iTunes folder. a typical one looks like this on the inside
the red arrow points to the heart of your iTunes library - the iTunes library file, the iTunes database. you will want to treat this file as the apple of your eye !
anyhoo, if indeed the entire iTunes folder is on the external, simply drag it from there to <MacintoshHD>/users/<yourname>/music on the new Mac.
since a folder by the same name is already in that location, the finder will tell you so and ask you if you want to "replace it with the one you're moving". confirm that you want that.
when the copying has finished, fire up iTunes and you should be taken to the exact same library you were used to from your old Mac.
finally, go iTunes > preferences > advanced and check that +iTunes media folder location+ is set correctly - it should point to the iTunes folder on your new Mac's startup disk. if it doesn't, change it accordingly.
please post back with results !
JGG -
HP Spectre x360 13-4002dx active pen and other issues
Hi, I'm havng issues with my active pen, but wasn't sure if it's an issue with my laptop or stylus (or if it's a software/driver issue). Is there an easy way to tell?Also, I've been using my laptop for a month now, and recently have had other issues, listed below. I wrote them down below in case that could provide some information, and/or if those issues are something I should be concerned about and should try to fix. To begin with, after doing some research, I bought a Synaptic active stylus (the Dell one), which worked very well for the first two weeks until last week. All of a sudden, it started to respond very awkward and randomly, sometimes it's too sensitive and draw lines even when the pen was off the screen, and sometimes it didn't draw anything at all even though I see the small circle following my pen tip. I initially thought it was due to low battery, but it's the same issue after I replaced the battery. Right now, the laptop doesn't respond to pen touching the screen (no clicks, no writings), although the pointer follows the pen. Any ideas on how to resolve this issue? How do I know if it's the pen that is faulty or if it's the laptop? Other issues I had or am having:1. Today, I had a BAD_POOL_HEADER error and blue screen of death. After reboot, everything seems to still work, but the login is now much slower. It's very fast to reach to the login screen, but it takes 2-3 minutes to bring up the desktop and other startup applications after I enter my password (I think it used to take less than 10 seconds). I tried rebooting 2-3 times, and it was always the same. 2. The laptop seems to gain heat very easily. With moderate workload (example, some websites with flash advertisements or videos), it can easily go above 70 degrees Celsius on either core (according to CPUID HWMonitor). One time, the system actually failed and forced hibernated due to overheating. (To me, the screen went blank all of a sudden. I turn the laptop back on, and the screen printed a message for a while saying it forced shutdown due to overheating. I realized it was hibernation after I logged in since I see all my windows) 3. On the second day of use of this laptop, the laptop just shutdown for no good reason, and then couldn't boot, saying it cannot find boot image or something like that. I looked up the web and found that it could be a BIOS issue. It said to try reseting the BIOS setting, and then it worked. I also upgraded the BIOS image to the latest after this incident. 4. This is probably more a router issue, but I initially had problems connecting wireless to my router. It was solved after changing my router. For those who are interested, the details is as the following: my old router supported up to 802.11n , but not 802.11ac, That shouldn't matter, but all wireless connections get disconnected once in every several hours if my HP Spectre x360 is trying to use the wireless. However the wired connections stayed ok when this happens, so the router is only "partially" killed. The fact that all wireless connections are getting killed seemed to me that the router didn't like something from my HP laptop. To be fair, I didn't try not using my HP laptop to see if the issue goes away, so it could be a coincidence that the router started to go faulty at the same time I bought and used my HP laptop. Anyways, it seemed it's a router issue, so after replacing the router. the issue went away. Thanks.
Will investigate and let you know what I can find out.
Although I am an HP employee, I am speaking for myself and not for HP.
Please click the little thumbs-up dealybopper to the lower right if my reply was helpful to you. Please mark Accept As Solution if it solves your problem. This will help others, too!
Maybe you are looking for
-
Is there a way of getting a list of your i tunes
Anyone know how to get a list of all the albums / tracks you have in your i tunes collection ? Which you can save as a document and print off etc. This would be an invaluable inventory , any way this can be done ?
-
Brand new to apple products. My ipod isn't recognized on computer (PC) and i can't sync music
I don't think my ipod nano is being recognized on my computer. How do I get it to read the device and then sync music i have in my library?
-
Messages are sending as SMS texts instead of iMessages to some contacts
Hi, I have noticed that a couple of my contacts with iPhones that I would normally iMessage to now I can only SMS text to. It seems that in both cases, previously I received and iMessage from them and when I replied, it failed so I chose to send it a
-
Does my iMac have a dual layer burner?
I'm trying to burn a 155 minute dvd. I only have 120 minute blank dvds. I'm told I need to buy dual layer dvds but this will only work if I have a dual layer burner. I have a PIONEER DVD-RW DVRTS09. Am I good to go?
-
On my iPad, how do I add urls to my bookmarks? Thanks