Plz guide me.. Facing prob with offsets in querry?

Hi Gurus,
I am NEW to BEx report and query designing...
Can anyone plz tell me how to do Last Year current month and Current month current year analysis and percentage change on a single field suppose invoice quantity..
Ok here r the details where i m facing probs..
I am executing query for Quantities sold for year specified through variable.
I m using 0P_FYEAR for year selection.
I m using single key figure 0INV_QTY.. again i made a copy of the same key figure and restricted with variable 0P_FYEAR-1 as offset.
Now i m getting values in first colums that is the origional key fig.. but not getting any values in the second one which is restricted through offset.
Where i m making a mistake plz let me know.. and also how to do a comparision between these two colums and desplay the % change in another column....
Plz help!
Any idea?
Regards,
Kush
Edited by: Kushal Prajapati on May 28, 2008 11:20 AM

Hi Kushal,
It looks like every thing is ok,
can u check whether your system date is correct.
or check whether current years data is matching or not.
also try disconnecting analyzer and reopen it, sometimes if data is reloaded it won't be refreshed.
Thanks
Tulsi

Similar Messages

Hey, i have very strange prob with my iphone 5(latest version/updated), after resetting it, so it doesn't connect to my laptop, even it doesn't charge too. it does charge from wall charger i try all the possible methods but still i am facing the prob

Hey, i have very strange prob with my iphone 5(latest version/updated), after resetting it, so it doesn't connect to my laptop, even it doesn't charge too. it does charge from wall charger i try all the possible methods but still i am facing the prob any fix/solution for it.. Helppppp!!!!!!!!!!!!!!!!!!!!!!!! As soon as possible, it will be gratefulness,
Thnksssssss....

So you are saying that you followed all of the steps in the support document for problems with connection, including removing and reinstalling iTunes? You do not say what you have tried, so it is hard to make recommendations. If this is the case, then you have tried resolving driver issues? What if you go to Device Manager and look for the iPhone. You should be able to click on it and see about drivers. You can update/reinstall the device driver.

Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

Hi Chhayank,
the problem is not the exported xls. If you have a look inside with Notepad or something like that, you will see that your leading zeros are exported correct.Excel-settings occurs this problem, it is all about how to open the document. If you use the import-assistant you will have no problems because there are options available how to handle the different columns.
Another solution might be to get familiar with ABAP2XLS-Project. I got in my mind, that there is a method implemented, that will help you solving this problem. But that is not a five minute job
~Florian

I could not sync my new phone contacts with my laptop, and when i connect my phone with my laptop it delet my new contects, plz guide me?

i could not sync my new phone contacts with my laptop, and when i connect my phone with my laptop it delet my new contects, plz guide me?

Reinstall iTunes. I had the same problem.

I am a proud owner of iphone5, iOS6.1.4, recently I am facing prob to connect it with Ford Figo. Its not that iphone is not connecting, its getting disconnecting immediately after connected. I hv tired other ph with car, its working fine, how 2 resolve ?

I am a proud owner of iphone5, iOS6.1.4, recently I am facing prob to connect it with Ford Figo. Its not that iphone is not connecting, its getting disconnecting immediately after connected. I hv tired other ph with same car, its working fine, how 2 resolve ?

Morning Indrajit Chatterjee,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
Best of luck,
Mario

TS4123 i just installed itunes 10.6.3.25 its asking to contact the software publisher i am using windows 7 ultimate plz guide me

i just installed itunes 10.6.3.25 its asking to contact the software publisher i am using windows 7 ultimate plz guide me

I hvae the EXACT same issue
I built a new computer which is EXTREMELY fast overclocked i7 ect and.. ITUNES DOESNT WORK
I click on itunes which ive uninstalled and reinstalled and reset the winsock AND seen if there were any errors AAAAAAND ive check the Hkey to make sure bonjur was the only one in there which it is and all that happens is my cpu goes to 25% and i cant do anything except go into the task manager and close it! ANYTHING with itunes (everything else is premium speed).
what do i do
windows 7 64 bit

Airport connection probs with Mac Pro and 10.4.8 too.

This prob is not just related to iMacs or MacBooks as published in the knowledge base doc. I have exactly the same prob with my 2.66 GHz Mac Pro. I have to reconnect this beast to my wlan router manually every time.
PLZ Apple fix this asap!

I had a similar problem which I've fixed!
I have four machines here which can connect to my Netgear DG834N via Aiport. (I say can because they normally connect via ethernet.) My MacBook Pro always used to be fine when connected wirelessly but recently, not aware of any changes I've made, it connects for about 10 seconds then disconnects. All other machines are fine and hold the connection.
This is what I tried before finding my solution:
1) Deleted all references to the network in the keychain and remade them.
2) Created another user to try
3) Changed channels on the router even though I can't see any neighbour's networks.
4) Made sure computer and router were up to date with firmware/software.
I'm assuming that it has to be a computer problem as the PowerMac, iMac and iPod Touch have no issues at all. However, the cure was in the router.
I run with SSID broadcast turned off, WPA2 encryption and MAC address filtering. Allowing broadcast of the SSID cures my problem. Turn it off and the computer connects then drops it ten seconds later. Turn broadcast on and it maintains the connection. I've tried it all afternoon, leaving it connected for about 30 minutes at a time before turning SSID broadcast off again. Works every time! Broadcast SSID - fine, no broadcast - drops after ten seconds.
Now, if only I knew why! And why only the laptop?

Customer Exit Variblae with Offset

Hello Everyone,
Can any one tell me whether we can use offset on Customer Exit Variable or no?
I have
Variable 1. Calmonth_01 in first Column which is also input varialble.
Variable 2. Calmonth_02 is second Columnt which is Exit Variable on which offset is not applied.
From third Column i m using second variable with offset.
According to me it has to work. but i m report it is not working.
Plz help.

Hi,
If you have any Input Variable on 0CALMONTH and based on the input month if you want to display the reports either + or 1 Months then you can use Off Sets it will work, no need to go for Customer Exit Variables.
1. Create a User Entry Variable on 0CALMONTH eg name of variable = ZMNTH
2. Restrict the Keyfigure with ZMNTH in column one.
3. Restrict the Keyfigure with ZMNTH-1 in column two, it will display Previous month data based on Input month
4. Restrict the Keyfigure with ZMNTH+1 in column three, it will display next month data based on Input month
Steps 3 & 4 are using Off Sets only.
For any Customet Exit variables see
https://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
Thanks
Reddy

Problem with offset length

Hi,
i have a problem with offset length please see below code and suggest :
data: content_new LIKE soli-line. "It has a length of 255 charecter
content_new = 'MTE:SD0\nwssd01_SD0_00\CPU\CPU_Utilization'.
content_new = content_new+4(251).
it is giving result:
content_new = SD0\nwssd01_SD0_00\CPU\CPU_Utiliza "it is removing last 4 charecter of UTILIZATION also
while i need :
content_new = 'SD0\nwssd01_SD0_00\CPU\CPU_Utilization'.
can anyone plz help me?
regards.
Moderator Message: Duplicate Post.
Edited by: kishan P on Oct 28, 2010 9:44 AM

You can find string length first. Subtract length by 4, Then use like new = str+4(len), use condense if required.

Plz guide me through manual Compression and Roll up process

I have pulled data from DSO to Cube. There are aggregates maintained here. now i have to do the compression(in infocube and in aggregate)and roll up (in cube and in aggregate)steps. can u plz guide me step wise..
Thank you

Hi Ramya,
Call T-Code RSA1> Search for your Info Cube > Click on Manage and follow the below mentioned steps for
Roll up
1. Click on Roll up Tab in 'Manage Info Provider' Screen
2. By default 'Request ID' in Roll up section will be filled with latest Request ID of the data loaded. All the requests before your latest request with be Rolled up.
3. Click on execute > click on Display external Jobs (Next to execute button) and monitor it.
4. Once the Roll Up job Completes successfully > Click on Requests Tab in the Manage Info Provider Screen > you will find a tick mark in Roll up status, which confirms your task.
Compression
1. Click on Collapse Tab in 'Manage Info Provider' Screen
2. By default 'Request ID' in Collapse section will be filled with latest Request ID of the data loaded. All the requests before your latest request with be Compressed.
3. Click on Release > click on Display external Jobs (Next to Release button) and monitor it.
4. Once the Compression job Completes successfully > Click on Requests Tab in the Manage Info Provider Screen > you will find a tick mark in Compression status, which confirms your task.
Hope this helps.
Regards
Sai

ACE Appliance HTTP Probe with "POST" query

Does the ACE support HTTP Probe with a "POST" query?
Thanks
Joe

Hi Joe,
The ACE only supports GET and HEAD
Here is the documentation related to this:
http://www.cisco.com/en/US/customer/docs/interfaces_modules/services_modules/ace/vA5_1_0/configuration/slb/guide/probe.html#wp1031485
Cesar R

HT201412 hello. my phone is factory unlocked. but my iphone support one network only in pakistan. if i insert another network sim it support but cannot make a call or text neither incoming nor outgoing. plz guide me what should i do.

hello. my phone is factory unlocked.
but my iphone support one network (Zong) only in pakistan. if i insert another network sim it support (Catch the signl and show the network name ) but cannot make a call or text neither incoming nor outgoing.
plz guide me what should i do.
ios 7.0.4

There aren't any supported carriers in Pakistan. Apple hasn't released the iPhone there. The OP is using a grey-market iPhone and hence is pretty much on his/her own as regards getting this phone working with the carrier, unless that carrier can help.
Regards.

Probs with online gaming due to subnet or IP addresses

When I first hooked up my router I had probs with Network Magic connections.
Now that I have it running better... I seem to be having a problem when gaming
online.
My boyfriend and I have hooked up our pc's together and have tried gaming online
together... and it worked for a couple of days. But with having some D-Link router
probs... we reconnected everything.
Now I recall seeing two different subnet numbers for each of us before we redid
the D-Link... now they are the same...
So I am wondering if this problem is router related or does it lie with Network
Magic? All I know is... that when I try to get on a multiplayer gaming server
I get kicked by Punkbuster saying: 'PB GUID AUTH: UNKNOWN'.
I think our online gaming predictament is due to my boyfriend and my subnet
numbers now being the same. (unlike before).
(If my prob does not relate to my router and Network Magic... than I thought
of putting in a Punkbuster Ticket to evenbalance.com)
Any help/suggestions would be greatly appreciated. : )
Note: my firewall is configed to allow online gaming, so I know that's not the
prob.

LJuliet wrote:
When I first hooked up my router I had probs with Network Magic connections.
Now that I have it running better... I seem to be having a problem when gaming
online.
My boyfriend and I have hooked up our pc's together and have tried gaming online
together... and it worked for a couple of days. But with having some D-Link router
probs... we reconnected everything.
Now I recall seeing two different subnet numbers for each of us before we redid
the D-Link... now they are the same...
So I am wondering if this problem is router related or does it lie with Network
Magic? All I know is... that when I try to get on a multiplayer gaming server
I get kicked by Punkbuster saying: 'PB GUID AUTH: UNKNOWN'.
I think our online gaming predictament is due to my boyfriend and my subnet
numbers now being the same. (unlike before).
(If my prob does not relate to my router and Network Magic... than I thought
of putting in a Punkbuster Ticket to evenbalance.com)
Any help/suggestions would be greatly appreciated. : )
Note: my firewall is configed to allow online gaming, so I know that's not the
prob.
Hi LJuliet ,
See this post: http://forums.linksysbycisco.com/linksys/board/message?board.id=Network_Magic&thread.id=18
Post back with additional details.
Also what do you mean by: My boyfriend and I have hooked up our pc's together?
Through the D-Link Router?
Please include information on Spyware protection on your computer.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

Strange prob with calander

I m facing really strange prob with calendar --- it is showing all the days of the March 1st to 31st correct but on the top in place of month it is showing February 2008 instead of March 2008. How can Feb has 31 days. I hv checked all the other settings.
This is happening in every month i.e it is showing the previous months name.
PLS HELP.

The standard troubleshooting procedures for the phone are to power the phone off/on. If that doesn't correct the issue, then do a reset. This is accomplished by holding down the home buttong and the sleep/wake button until you see the Apple logo, then release the buttons. Ignore the slide to turn off message. If that does not correct the issue, then connect to iTunes and restore the phone.
Hope these help you.

I am facing problem with my BB Torch 9800

I am facing problem with my BB Torch 9800....even if protection is disabled...i m not able to download any more apps for BB....any help??? plz see link for pic with problem i am facing..
http://t.co/WCxkdCZC

Hello meraman88 and welcome to the BlackBerry® Support Community Forums.
Sorry to hear you are exercising issues with BlacKBerry® App World™ on your device and computer.
If you were to try the application installation on your device, are you able to do so? Do you currently subscribe to a data plan that includes App World access?
Is your device connected to a Wi-Fi® network or the mobile network?
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Plz guide me.. Facing prob with offsets in querry?

Similar Messages

Maybe you are looking for