Plz help 5800

Plz help, my 5800 is deleting files like songs & vids automatically ..This problem started when i upgraded my phone from 30.01 firmware to 40.05 from nokia care center ? Plz help..

your card may be corrupted, or the firmware may not have been installed properly. You may need to format your card.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Similar Messages

Plz help me 5800

time reset after power off
phone 5800
plz help me
br
john

The auxilliary battery in your phone is faulty. Get it replaced at your local Nokia Care Point.
You can find your nearest Nokia Care Point at:
For UK
http://www.nokia.co.uk/A4228006
For Europe:
http://europe.nokia.com/A4388379
For Asia-Pacific
http://www.nokia-asia.com/A4416070
Elsewhere:
http://www.nokia.com select your country, go to the support section, then select repair.

Plz Help With Nokia 5800 XM ...... Plz

Hi everyone,
I have nokia 5800 and i like it very much... But i have a problem with it ..... the problem that when i download any thing from nokia OVI Store from my mobile like: Games, apps and videos when download finished and starting to install the games or the apps it's say's: "installation failed" and when i redownload it again nothing change and keep saying "installation failed" ........ and i noted that when i install app ( themes, apps and games ) on my mobile by ovi suite or by file manager it also say's to me "Expired Certificat" even if i signed this apps but it alwyas say's "Expired Certificat"....... for this problem i did: hard reset - format my mobile - format my sd card - update my mobile to v40 - but the problem never stops to return in a few hours ..... then i find out that when i need to install any app on my mobile (by ovi suite or ovi store in my mobile or file manager) i have to switch off the mobile and turn it on again to install what ever i want ...... so Plz help me out
PS: 1- I have 2 friends having the same problem that i have and they did what i did
2- my mobile software v. when the problem stated v31
3- my memory card 8 GB the orginal one
Thanx and Please Tell Me What to Do
Bye

Option 1
NOTE
- YOU CAN ONLY INSTALL SIGNED APPLICATION WITH THIS METHOD.
- IF YOU DONT TAKE BACKUP OF YOUR DATA OR FOLLOW THE EXACT STEPS HERE YOU WILL LOSS ALL DATA.
1. With the phone switched on, press the power button key once.
2. Scroll down to and select "Remove E: Memory Card".
3. Select Yes to remove the memory card.
4. Press OK and remove memory card from phone.
5. Press the Dialler on the main screen.
6. Type *#7370#
7. Enter security code. Default is 12345 unless it has been changed.
8. The phone will reset, wait for this to complete and power back on.
9. Select your country and type in the correct time and date.
10. Wait for the phone to complete its configurations, you may receive "My Nokia" or tutorial messages.
11. Power off phone.
12. Insert the memory card.
13. Power on the phone.
14. Wait for the phone to install any pre-loaded content from the memory card.
15. Phone is ready to install applications, without "Expired Certificate" error message.
Option 2
Alternatively use this to apply for .CER and .KEY for signing applications / games.
Download SignSIS & FreeSigner (Freeware)
- http://www.2shared.com/file/10095405/d0fd4cfb/Sign_SIS_GUI.html
Signing Video Tutorial
- http://www.youtube.com/watch?v=z0mZ6d1klaU
Also, please feedback the results as the results could be useful to other members / visitors.
Thanks & best regards,
XM
I'm an Xploit - Please feel free to post your issues, feedbacks in this discussion forum and I'll do my level best to help, otherwise my knowledged friends whom are around willing to help you. Thank you !

Plz Help i wanna buy 5800 with GPS!!!!

Hi, I'm Wesam - live in egypt, i wanna buy nokia 5800 but when i went to buy it i found that all packages written on it (NO NAV) ?
is it means these devices don't have GPS (GPS now available in Egypt) and if i buy it i wanna know can i update my software device to have this facility in future or this is a hardware must be added in the manufacture.
Plz help me cuz i need to change my mobile and i wanna 5800 be my next mobile, thnx

I dont know really, but it seems that my phone have some sort of GPS system. and i have 5800, really great phone. but still it shuld not have been realesed so quickly. still some mayor system buggs Nokia have to take care of.

I Can't update Nokia 5800 Xpress Music --plz help

Hay all ,,
plz help me
I can't use Nokia software updater to update my phone
Nokia 5800 Xpress Music
I want to update it with my Pc
Not by Phone
That's the error massage
http://i47.tinypic.com/16c508g.jpg
PLz help me
My FW is 11 !!!!

What operating system are you using on your PC and what version of the software updater?
If I have helped you with your problem in some way, please take a little time and hit the kudos button in my post. Without your feedback, I don't know if I am being helpful or should just be put out to pasture.

Error while opening a module. plz help me, very urgent.

when i try to open a module, the following error message appears on my screen.
          " no j2ee component found in d:\krisp\programs\servlets".
          i've installed bea in c: drive and my servlet program is in d: drive.
          plz help me, it's very urgent.

Can you provide some more information? What were you doing when this happened?
          Can you post the entire error message?
          -- Rob
          WLS Blog http://dev2dev.bea.com/blog/rwoollen/

Hi when i open my application folder, all the application is shown in trash folder. when i click the application it says this app is in trash first move it out. and when i try to open through finder go it says this file doesn't exist. can some1 plz help?

hi when i open my application folder, all the application is shown in trash folder. when i click the application it says this app is in trash first move it out. and when i try to open through finder> go it says this file doesn't exist. can some1 plz help? how can i put all my application through application folder?

Something really odd is going on. In your first screen shot, I noticed that the Applications folder does not have the proper icon displayed in the side bar. Also, in the title bar it lists it as Applications 08-59-29-909.
Not sure where it's picking up that odd name, unless it's because it's still truly within the Trash folder.
Try this. In the Finder > Preferences > General > turn on "Always open folders in a new window". (I have a feeling you have the default setting with this off).
Now, in Finder > Go > move down and open the Applications Folder from there. Now open the folder where you see all your applications that you show in your screen shot, select all, and move them to this true appliactions folder.
This is what you should properly seeing (but with different apps listed):
See how the Applications folder has the icon of the letter A shaped with a pencil, ruler & pen.

How to select the download location? its automatically downloading to users folder in c drive. i wanna change it..plz help me out......

how to select the download location? its automatically downloading to users folder in c drive.. i wanna change to my desktop...plz help me out...

Tools -> Options -> Save files to -> Click browse button and browse for folder where you want to save the file.

How to print text/data in flex 3 using printer???Plz help...

   Hi,
          plz tell me the way to print text/data using printer in flex. I tried the FlexPrintJob class. but it takes object of a container to be printed & prints the visible content of that container(along with scrollbars), bt i want to print all contents of the container(including invisible).
      I have tried to print bitmap image through FlexPrintJob but it takes lot of time for spooling... So plz help me out in printing(fast with all content) in flash
I am using flex 3 (flex Builder 3 IDE).
Thanks in advance!!!

Hi Sagar,
Don't worry You can use the below work around to print all the contents of the Container including the invisible contents under scrolll with out scroll bar..
So what the idea here is we are seeting the container height to full size with out scrolls before sending the container object to printer and as soon as you print the object you are restoring it to the original height with scrolls...so that you can print the full contents without scrolls...
You may have doubt that by chnaging and restoring the size the user may see momentary resize of the container but it is not so as it is a fraction of a second and user cannot notice this change... Give it a try ..I had already run into this problem recently and I have found a work around for this which is as below:
// Here mainContainer is the container or box id the contents of which you want to print
   private function doPrintContainer():void
    var printJob:FlexPrintJob = new FlexPrintJob();
    if(printJob.start() != true) return;
    try
     var mainContainerHeight:int = mainContainer.height;
     //Increasing the height of the desired component to be printed.
     mainContainer.height = mainContainer.measuredMinHeight;
     mainContainer.verticalScrollPolicy = "off";
     //Adding the resized Component to our FlexPrintjob and then sending the print request
     printJob.addObject(this,FlexPrintJobScaleType.MATCH_WIDTH);
     printJob.send();
     //Resizing the component back to normal size
     mainContainer.height = mainContainerHeight;
     mainContainer.verticalScrollPolicy = "auto";
    catch(error:Error)
                 trace("Error : " + error.message);
If this post answers your question or helps, please kindly mark it as such.
Thanks,
Bhasker Chari

My ipod touch 5th generation wont download apps and let m e use them!!! Plz Help me fast!

I have an i pod touch 5 and I try to download a new app from the app store so i goto the app store and click download then click it again to install it and it installs but it dont leave an app icon on the home page so i go back to the app store and it says open in a ble box so i click open and it dont open it just keeps saying open and it wont open! please help me!!!!!!!!!!!

I ment blue not ble sorry but plz help!

Help my iPod won't let me download apps... I'll put my password in then it takes me to the app but then is just goes away then I do it again an it won't load or it will just go away again plz help I want to get apps

Help my iPod won't let me download apps... I'll put my password in then it takes me to the app but then is just goes away then I do it again an it won't load or it will just go away again plz help I want to get apps

You said you updated yur 1G iPod to 4.2.1. A 1G can only go to 3.1.3 and thus you must have jailbroken it to get to 4.2.1 and that can cause problems.
ArealDJ wrote:
I have the same problem.. apps won't download and won't open. I have a 1st Gen ipod touch and recently upgraded my MacBook Pro (2012) and as soon as I upgraded the iPod Touch to 4.2.1, this happened. I restored to factory defaults and still cannot dl and open apps. Any way to diagnose this problem? Apple tech charges $29.99 for out of warranty products and if I am reluctant to pay with them telling me its simply a hardware problem.

I restored my Macbook Pro and now I can't log in as Admin - it says there is an error with FileVault and I don't have access - plz help! thank you.

I had to restore my Macbook Pro from Time Capsule yesterday and now when I go to log in as my usual Admin, it says there is a FileVault error and my access is denied. I created another temporary Admin acct, but everything I had on my desktop, etc is "gone" I can look up the "drive' or wahtever it's called, but I can't access any of it. All I want to do is log back in as my usual self (the regular Admin) - plz help! Thanks. p.s. I"m (obviously) not that computer savvy!

Triple-click the line below to select it:
/System/Library/CoreServices/Directory Utility.app
Rght-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu.* The application Directory Utility will open.
In the Directory Utility window, click the lock icon and authenticate. Select the Directory Editor tool in the toolbar. Select Users from the Viewing menu in the toolbar, if not already selected. Select the affected user account in the list. On the right is a list of properties and values. Select the property "HomeDirectory" and delete it by clicking the minus-sign icon directly below the property list. There are two such icons in the window. You want the one on the right, not the one on the left.
CAUTION: Do not click the minus-sign icon on the left, below the user list.
Then click the Save button in the lower right corner of the window. Quit Directory Utility.
CAUTION: There is no "undo" in Directory Utility. If you make a mistake and delete something in the Directory Editor that should not have been deleted, restore your whole system from a backup and start over. I have no other help to offer in that case.
Try again to log in as the affected user. If you can log in, you should find a file in the home folder with the name of the user and the filename extension "sparseimage" or "sparsebundle". Double-click that file. A disk image should open. Copy your files from that disk image to restore them.
I strongly suggest that you deactivate legacy FileVault in the Security & Privacy preference pane, then log out and log back in. Consider activating FileVault 2 if you want that kind of security.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

Error in variables,plz help me

I created a variable del_var.The sql query assosiated with this variable is.
Delete from schema.file_name_table where rownum=1;
After refreshing it.it is deleting first row in the table.But it is resulting in an error
"17003 : null : java.sql.SQLException: Invalid column index java.sql.SQLException: Invalid column index "
Plz help me

Hi,
You can't use a 'Delete" command at a refreshing variable because at a refresch the variable need to receive a value back and the delete doesn't return value.
Change the command to "select....."
Does it make sense to you?

Not able to access webservice after migrating from 8.1 to 10.3,plz help

Hi All,
Prev our application was running in weblogic 8.1 and now we moved to 10.3
We are able to deploy our webservice in 10.3 and access the wsdl but we are not able to access the webservice from the client.
Even the testclient is not comming up.
After spending long time in that,now i dont have any clue on this issue.
Plz help on this
Thanks ni advance,
Mouli

Sunil,
We are not seeing any exception.We regenerated the webservice and then deployed in the 10.3
When we make req from the client ,we are getting null response but thing is there are no log trace in the server side for that
folllowing is the input string we are pasing to the method notifyservice
IN the client we pass the wsdl url and then pass the following input string and hit the notifySerivce method
Req:
<?xml version="1.0" encoding="UTF-8" standalone="no"?><object><GLCCode>102431</GLCCode><callBackNumber>888256798</callBackNumber></object>
Res:
<m:notifyService xmlns:m="http://www.testportal.com/outbound/tsp/WowWebservices">
<result xsi:nil="true"/>
</m:notifyservice>
Therre was an exception in the client side,plz check below
javax.xml.rpc.soap.SOAPFaultException: Failed to get operation name from incoming request
at weblogic.webservice.core.ClientDispatcher.receive(ClientDispatcher.java:317)
at weblogic.webservice.core.ClientDispatcher.dispatch(ClientDispatcher.java:147)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:473)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:459)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:569)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:422)
Thanks For your time,
Mouli

HT2534 My Apple ID is not working.....plz help

My Apple ID is not working I made it yesterday using my PC .......plz help.......

Try sign in to iTunes and App Store
Settings>iTunes and App Store>Apple ID

Plz help 5800

Similar Messages

Maybe you are looking for