Plz help??????????drop one table accidently.........want to restore

i have drop one table in which there is very important data
i want to restore it in any cost ...........
plz help me in doing so..............

Below link will help u.
http://www.psoug.org/reference/tab_flashback.html

Similar Messages

Hi, I have moved to India from france and I am trying to update my payment options to the Indian visa card but it seems that no matter what I do I cant do it. I dont want to create a new ID..Plz Help!!!Just want to change my location and my payment detail

Hi, I have moved to India from france and I am trying to update my payment options to the Indian visa card but it seems that no matter what I do I cant do it. I dont want to create a new ID..Plz Help!!!Just want to change my location and my payment details!! thanks in advance!!

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then seeRecover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2

I want to delete my data from iphone while i doesnot have the access but i know my apple id so plz help me its urgent, i want to delete my data from iphone while i doesnot have the access but i know my apple id so plz help me its urgent

i want to delete my data from iphone while i doesnot have the access but i know my apple id so plz help me its urgent, i want to delete my data from iphone while i doesnot have the access but i know my apple id so plz help me its urgent

Welcome to the Apple Community.
You can only wipe your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

Import command for one table core dumps

Hi,
The following import command is causing a core dump;
$ imp system/***** file=/upload/dbdumps/06-09-19_11.00.01-db.dmp fromuser=ioeadmin tables=(utils) 2>&1 |tee imp.log
But this one does not:
$ cat imp.params
FULL=y
FILE=/upload/dbdumps/06-09-19_11.00.01-db.dmp
GRANTS=y
INDEXES=y
$ imp system/*****@odinprd parfile=imp.params 2>&1 |tee imp.log
More info:
SunOS 5.8 / Oracle 8.1.5
Thank you for any help on this

I don't have access to Metalink. What would it say -- "imp tables=" doesn't work in 8i?
So I have tried the following:
1. drop the table I want to restore.
2. run this command to restore all tables and let it fail on those tables that already exist and recreate the one i dropped.
imp system/code4202@odinprd full=y show=y file=/upload/dbdumps/06-09-27_00.00.00-db.dmp 2>&1 |tee imp.log
But it doesn't. It says this about the table in question:
"ALTER SCHEMA = "IOEADMIN""
"CREATE TABLE "PARTNER" ("PARTNER_ID" VARCHAR2(16) NOT NULL ENABLE, "PARTNER"
"_TYPE" VARCHAR2(16), "ADDRESS_ID" NUMBER(10, 0), "PAYMENT_ID" NUMBER(10, 0)"
", "PRICE_LIST_ID" NUMBER(10, 0), "DEFAULT_CARRIER" VARCHAR2(32), "DEFAULT_M"
"ETHOD" VARCHAR2(32), "CARRIER_ACCOUNT_NUMBER" VARCHAR2(32), "BILLTYPE" VARC"
"HAR2(10), "TMB_TYPE" NUMBER) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255"
" LOGGING STORAGE(INITIAL 10240) TABLESPACE "APP_DATA""
. . skipping table "PARTNER"
why is it skip this guy? It does not exist:
SQL> desc partner;
ERROR:
ORA-04043: object partner does not exist
SQL> desc ioeadmin.partner;
ERROR:
ORA-04043: object ioeadmin.partner does not exist

How to find the user who dropped the tables

Hi All,
Some one has dropped 5 tables in the production database that has caused a SEV1 but thankfully we are having those tables in recyclebin and we are restored those with out data loss.
But I want to know who has dropped those tables and want to know who has connected to database at that time. Can you please guide me in this how to find out....
Database version: 11.2.0.2 version
Thanks
Kk
Edited by: 908098 on Jan 18, 2012 4:23 AM

Or you can use this kind of audit (i had used this some time ago)
-is pretty detailed but is good for auditing purpuse.
hope this helps
CREATE TABLE AUDITORIA_ESQUEMA (
operation VARCHAR2(30),
os_user VARCHAR2(30),
obj_owner VARCHAR2(30),
object_name VARCHAR2(30),
object_type VARCHAR2(30),
sql_text     VARCHAR2(64),
attempt_by VARCHAR2(30),
attempt_dt DATE,
Ip_adress VARCHAR2(15));
CREATE OR REPLACE TRIGGER AUDITORIA_ESQUEMA
BEFORE CREATE OR ALTER OR DROP OR RENAME or alter
ON DATABASE
DECLARE
oper varchar2(200);
sql_text ora_name_list_t;
i      PLS_INTEGER;
BEGIN
SELECT ora_sysevent
INTO oper
FROM DUAL;
i := sql_txt(sql_text);
IF oper IN ('CREATE', 'DROP','RENAME','ALTER') THEN
     INSERT INTO AUDITORIA_ESQUEMA
     SELECT ora_sysevent,(select sys_context('USERENV','OS_USER') from dual)
, ora_dict_obj_owner,
     ora_dict_obj_name,ora_dict_obj_type, sql_text(1), USER, SYSDATE,
     (select SYS_CONTEXT('USERENV', 'IP_ADDRESS') from dual)
     FROM DUAL;
ELSIF oper = 'ALTER' THEN
     INSERT INTO AUDITORIA_ESQUEMA
     SELECT ora_sysevent,(select sys_context('USERENV','OS_USER') from dual)
, ora_dict_obj_owner,
     ora_dict_obj_name,ora_dict_obj_type, sql_text(1), USER, SYSDATE,
     (select SYS_CONTEXT('USERENV', 'IP_ADDRESS') from dual)
     FROM sys.gv_$sqltext
     WHERE UPPER(sql_text) LIKE 'ALTER%'
     AND UPPER(sql_text) LIKE '%NEW_TABLE%';
END IF;
END AUDITORIA_ESQUEMA;

Plz help don't know how to create a query and link it to a UDF

hi,
i am new to business one and however hard i am trying to use a query to link it to a UDF, it is not working. i think i am doing the whole thing wrong,so ill just post one problem i have and if any one of u can explain to me in steps i may be able to learn to link other queries and UDFs.so plz help me out .
problem:
i want to display the account balance of every customer/vendor whenvever i open a marketing document. i have created a UDF for the marketing documents in the title with name and description 'account balance'.
Now how do i link the customer/vendor name field to this UDF so that the query generated will show the account balance of the corresponding customer/vendor.plz tell me in steps as to what tables to choose ,what fields to choose, what conditions and relatoins to use in a query wizard
thank you

hi,
A/R invoice
for name UDF:
SELECT T0.CardName FROM OCRD T0 WHERE T0.CardCode = $[OINV.CardCode]
for balance UDF:
SELECT T0.Balance FROM OCRD T0 WHERE T0.CardCode = $[OINV.CardCode]
A/P invoice
for name UDF:
SELECT T0.CardName FROM OCRD T0 WHERE T0.CardCode = $[OPCH.CardCode]
for balance UDF:
SELECT T0.Balance FROM OCRD T0 WHERE T0.CardCode = $[OPCH.CardCode]
FOR OTHER FORMS ONLY CHANGE THE END OF THE QUERY FOR Example
$[OPCH.CardCode]
OPCH is the table name, change it to other table.
save the query and set it to customer code for refresh in A/R invoice
save the query and set it to Vendor code for refresh in A/P invoice
regards
sandip

Hi there, i am big fan of Firefox browser,and nw i hear Firefox OS on android phone, i own a Gieonee ELife E7 16gb Varient & i wnt 2 instal FF OS. plz help me.!

Hi there, i am big fan of Firefox browser,and now i hear Firefox OS on android phone, i own a Gieonee ELife E7 16gb Variant & i wnt 2 instal FF OS. plz help me.!
I want to install Firefox OS for my phone, please let me know the way to do it. i have rooted my phone
and costumed my ROM.

There are some Android devices which other people have already built and installed Firefox OS for.
If you have a Galaxy S2 and Nexus 5 it may be a bit easier to port Firefox OS - however, there is always the risk of bricking your device and making it useless.
Please also be aware that not all features of Firefox OS may work correctly on a ported build. If you are curious to know more, you may find information on these sites:
* [https://developer.mozilla.org/en-US/Firefox_OS/Installing_on_a_mobile_device Installing Firefox OS on a mobile device]
* [http://nexus5.wonderhowto.com/how-to/install-firefox-os-other-experimental-roms-your-nexus-5-without-any-risk-0150964/ How to Install Firefox OS (& Other Experimental ROMs) On Your Nexus 5]
You can also try the Firefox OS by running the simulator in your Firefox browser. Please check the following article for instructions:
* [https://support.mozilla.org/en-US/kb/how-set-firefox-os-desktop-build#w_run-the-firefox-os-simulator]
If you are an advanced user and would like to learn more information about manually porting Firefox OS to your specific device, you can go to MDN (Mozilla Developer Network):
* [https://developer.mozilla.org/en-US/Firefox_OS/Porting]
We hope you find this information helpful. Please let us know if you have any other questions.

Plz help me, no display output during boot up of 715 workstation

now i have a HP 715 model workstation,today, conneted hp monitor..but can't display output during system boot up so i tried solve this problem,1)changed battery2)removed HDD after reboot system and press ESC key => now can't use Keyboard..not working key board3)Press Tap key.. Just i think, this problem is system configulation problem. not monitor problem..so i found internet website..but now i can not change configulation who know this problem.plz help me

one question in html submit the reslut stored jdbc that value shows barchartAll your base are belong to us!
You know, while I understand that English isn't your first language (neither is it mine) and there's no need to be perfect: if you can't write an understandable post yourself, consider asking someone to do it for you.

How to restore one table from the previous backup in 9.2.0.8 version.

Hi,
How to restore one table from the previous backup in 9.2.0.8 version.
Thanks
-Ganga

Hi,
What is the table you want to restore?
Using export/import is supported with Oracle Apps database (for full database exp/imp, and certain schemas like custom ones). For the Apps schema, I believe it is not supported due to object dependencies and integrity constraints.
Regards,
Hussein

HT1491 Cannot remember the security answers. Bought a new phone. Plz help!

Cannot remember the security answers. Bought a new phone. Plz help! iPhone 5. Want to buy apps and it keeps asking questions I do not remember. How do you reset this?

On your computer or safari on your iOS device navigate to:
          For Canada - https://appleid.apple.com/ca.
          For United States - https://appleid.apple.com/us/.
Click the "Manage your Apple ID" button, and sign in to your iCloud account. Once in, on the left side select "Password and Security", and this will populate our options on the right side. You should see an option to reset your security questions.
Also see this article about your "rescue email address" - http://support.apple.com/kb/HT5312.
If for any reason you can not reset these security questions, or get an error, then you may need to contact Apple directly - http://support.apple.com/kb/HE57.   Explain the issue, and they can get your to a "Account Security" agent, who will be able to verify your identity, and assist in resetting the security questions.

My iphone 3g always ended everytime i restore it plz help me

I restore my iphone in itunes but everytime i go in "restoring iphone firmware" it always ended error...plz help me to fix it

Kwonkicker wrote:
I restore my iphone in itunes but everytime ... it always ended error...
And the Error Message is...?

Accidently Pressed the Restore Button

Please Help!! I accidently pressed the Restore button instead of the Update Button and although I didn't finish the process My phone now is frozen and every time I connect it to the computer it says it needs to finish restoring which I don't want to do cause I will probably lose all my contact info, pics, and notes...what do I do?? What can I do?? How can I turn on the phone and keep it as is...Please Help!!!!
Thanks,
Annie

Restore it, then once it's finished restore it again but this time use your last backup.
If you don't have a backup you can just sync the phone with iTunes and all your contacts etc. will be sync'd back to the phone.
Camera Roll photos will be lost if you didn't do a backup
Also app dat such as game scores and settings such as wi-fi and e-mail accounts will be lost without a backup

I have added a ADD-ONE like smart digg I want to debug this ADD-ONE. So plz help me how can i debug this.

I wants to debug and ADD-ONE plz help me how can i debug the ADD-ONE.

That's correct - you can't add it to another controller.
From the View Controller Catalog for iOS:
A split view controller must always be the root of any interface you create. In other words, you must always install the view from aUISplitViewController object as the root view of your application’s window. The panes of your split view interface may then contain navigation controllers, tab bar controllers, or any other type of view controller you need to implement your interface. Split view controllers cannot be presented modally.
-=-
Ken

Plz. help,table does not show value for one field

hi all,
i have a really strange problem , i have a string field in access database that contains the date and time value,this field for some strange reason does not show in my table created through html,
i tried all combination(arranging the fields) ,renaming it w/o help, it shows the value using out.println(but then why is it not showing me in the table???)
plz. help ASAP.
the code is as under
<HTML>
<HEAD><TITLE> LOGGED IN ok</TITLE> </HEAD>
<BODY bgcolor = "yellow">
<%@ page import = "java.sql.*" %>
     <%! // declaring variables
String s = "";
java.sql.ResultSet rs=null,rs1=null,rs2=null;
java.sql.Connection con;
java.sql.Statement stmt,stmt1;
String empId = "",compid ="",calltype ="",probheader="",probdescription ="",probcomment ="",priority ="",a="";
%>
Following are the pending complaints ..
     <TABLE BORDER=1 CELLSPACING=0 CELLPADDING=0 width="100%">
     <TR>
     <TD> ComplainD </TD>
<TD> ComplainId </TD>
<TD> ProbHeader </TD>

</TR>
     <%
     try
     Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
     java.sql.Connection con = java.sql.DriverManager.getConnection("jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};" +"DBQ=c:/vishal/HelpDesk.mdb;DriverID=22;READONLY=false","","");
     //java.sql.Connection con = java.sql.DriverManager.getConnection("jdbc:odbc:Portal");
          java.sql.Statement stmt = con.createStatement(java.sql.ResultSet.TYPE_SCROLL_INSENSITIVE,java.sql.ResultSet.CONCUR_READ_ONLY);
          s = "select * from Complains";
     java.sql.ResultSet rs = stmt.executeQuery(s);
                    while(rs.next())
                    //getting data from database
                                                       empId = rs.getString("EmpId");                    // out.print(" " + empId);
          compid = rs.getString("ComplainId");
          // out.print(" " + compid);
          calltype = rs.getString("CallType");
          // out.print(" " + calltype);
                    a = rs.getString("Complaindate"); //problem with this field
out.print(a); // prints value
          %>
                    <TR>
                    <TD> <%=compid %> </TD>
                    <TD> <%=calltype %> </TD>
                    <TD <%=a %> </TD>
                                   </TR>
<%
                    }//while loop
     %>
     </TABLE>
     <%
     }//try
          catch(Exception ep)
          out.println(ep);
          System.exit(1);
%>
</BODY>
</HTML>
value in database is as follows :-
Complaindate
5/18/2003 1:30:27 PM
5/18/2003 7:32:43 PM
5/18/2003 7:34:02 PM
5/18/2003 7:49:19 PM
5/18/2003 7:50:27 PM
5/18/2003 10:49:42 PM
5/18/2003 10:58:24 PM
thanking u ,plz ask if any further clarifications

Hi
I am seeing nothing wrong with ur code..
what about "view source" result.....plz check with that...
whether u r getting all the trs and tds...
revert back on this Issue..
Mars Amutha

Plz help me convert this into a table format

Hi,
private String makeInfo(Vector p_dataV)
String info = "";
if (p_dataV.size() > 0)
info += "<font size=1>";
for (int i=0; i<p_dataV.size(); i=i+2)
info += p_dataV.elementAt(i) + ": <b>" + p_dataV.elementAt(i+1) + "</b><br>";
info += "</font><br>";
return info;
I want values of p_dataV.elementAt(i) in one row &
values of p_dataV.elementAt(i+1) underneath the first row
Plz help ......
Regards,
Vishal

Come on dude, its pretty simple.
The following should work.
I've used Collection Interface rather than Vector (makes it more generic)
also used an iterator rather than a for loop.
And used a StringBuffer for building the data in the loop, rather than a String (more efficient). In Java1.5 you should probably use an enhanced for loop, and a StringBuilder.
I was also careful about the fact of bad data in the list. It won't break if you don't provide an odd number of elements.
private String makeInfo(Collection p_dataV)
String info = "";
StringBuffer topRow = new StringBuffer();
StringBuffer bottomRow = new StringBuffer();
for(Iterator it = p_dataV.iterator(); it.hasNext(); ){
topRow.append("<td>" + it.next() + "</td>");
if (it.hasNext()){
bottomRow.append("<td>" + it.next() + "</td>");
info = "<table><tr>";
info += topRow.toString();
info += "</tr><tr>";
info += bottomRow.toString();
info += "</tr></table>";
return info;

Plz help??????????drop one table accidently.........want to restore

Similar Messages

Maybe you are looking for