Plz help f.01 dump

Hi ,
In transaction f.01 if i exicute after entering respective data   gives financial statement if i go o menu List -> export -> additional functions of SAP Query. it gives me dump.when I analyse that dump it is some selection error which in in turn no function available error in function mudule SLVC_EXPORT_XINT.
code is........
if functionkey = space.
      call function 'RSAQ_XINT_SELECT_FUNCTION'
           importing function_name = function
                      canc          = canc
           exceptions no_functions = 1
                      others        = 2.
      if ( sy-subrc <> 0 ).
        message s630(AQ) with functionkey raising selection_error.
      endif.
      if ( canc ne space ).
        raise cancel.
Can any body tell me why is so?
Thanks.

No dear,
I am just tring to use List -> export -> additional functions of SAP Query.
and it giving dump.
stating some selection error.
Thx.

Similar Messages

Experts plz help me short dump

hi experts
plz help me
in ecc 6.0 gettin a short dump
THANKS IN ADVANCE
error is ::
For the statement
       "TRANSFER f TO ..."
    only character-type data objects are supported at the argument position
    "f".
    In this case. the operand "f" has the non-character-type "T_LINE". The
    current program is a Unicode program. In the Unicode context, the type
    'X' or structures containing not only character-type components are
    regarded as non-character-type.
and it is coming in line::
LOOP AT v_tab.
TRANSFER v_tab TO p_file. "<b>this line contains error</b>
ENDLOOP.
FYI::
TYPES: BEGIN OF t_line,
       pspid(9) TYPE c,
       tab1 TYPE x,
       post1 TYPE proj-post1,
       tab2 TYPE x,
       vernr TYPE prps-vernr,
       tab3 TYPE x,
       astnr TYPE prps-astnr,
       tab4 TYPE x,
       usr00(12) TYPE c,
       tab5 TYPE x,
END OF t_line.
PARAMETERS: p_file LIKE rlgrap-filename OBLIGATORY.         "DMA20040510
OPEN DATASET p_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
QUESTION:::
CAN WE USE FEILD SYMBOL IN IT
LIKE TRANSFER <Fs> TO P_FILE.

Hi,
    LOOP AT v_tab ASSIGNING <in>.
    p_file = <in>.
    ENDLOOP.
Best regards,
Prashant

Experts plz help its very urgent

hi expert
plz help- me
previously i was getting dump in this statement
TRANSFER v_tab TO p_file.
FYI:
here v_tab is a table which hav som records
and p_file contains the path of a file like c:\new\ggg.txt
DATA: v_tab TYPE STANDARD TABLE OF t_line WITH HEADER LINE,
TYPES: BEGIN OF t_line,
       pspid(9) TYPE c,
       tab1 TYPE x,
       post1 TYPE proj-post1,
       tab2 TYPE x,
       vernr TYPE prps-vernr,
       tab3 TYPE x,
END OF t_line.
DUMP I WAS GETTIN :
For the statement
   "TRANSFER f TO ..."
only character-type data objects are supported at the argument position
"f".
In this case. the operand "f" has the non-character-type "T_LINE". The
current program is a Unicode program. In the Unicode context, the type
'X' or structures containing not only character-type components are
regarded as non-character-type.
to avoid this dump i used feild symbol
assign V_TAB to <IN> casting.
      p_file = <in>.
      unassign <IN>.
nw there is no dump
but problem is p_file contains the contents of v_tab not the file path .
plz help me its very urgent
thanx in advance

Hey, no probs,
after your initial declaration, do this.
TYPES: BEGIN OF n_line,
pspid(9) TYPE c,
tab1(15) TYPE c,        "check the length you want
post1 TYPE proj-post1,
tab2(15) TYPE c,         "check the length you want
vernr TYPE prps-vernr,
tab3(15) TYPE c,         "check the length you want
END OF t_line.
DATA: n_tab TYPE STANDARD TABLE OF n_line WITH HEADER LINE.
now after you fetch data into v_tab,
move it to n_tab.
using a loop at v_tab and move corresponding fields to n_tab's work area
append to n_tab.
once you have populated n_tab and are ready to TRANSFER.
OPEN your file using
open dataset <file> for output in text mode encoding default.
now
loop at n_tab.
TRANSFER n_tab to p_file.
endloop.
CLOSE DATASET.

Plz help upgrade issue moving data from char type structure to non char typ

Hi Experts
plz help its very urgent
Data :workout(5000) .
FIELD-SYMBOLS : <FS_WORKOUT> TYPE ANY.
workout = '         u' .
ASSIGN WORKOUT TO <FS_WORKOUT> CASTING TYPE C .
                  BAPISDITM = <FS_WORKOUT>.
i am getting dump after BAPISDITM = <FS_WORKOUT>.
i think i am getting the dump bcoz i am moving character type structure to non character type structure but i think with field symbols we can remove this issue thats y i used it but its not working plz help me
its very urgent
*dump is :*
Short text
    Data objects in Unicode programs cannot be converted.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "ZSDR0009" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
How to correct the error
    Use only convertible operands "dst" and "src" for the statement
       "MOVE src TO dst"
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "UC_OBJECTS_NOT_CONVERTIBLE" " "
    "ZSDR0009" or "ZSDR0009_I02"
    "USER_COMMAND"
thanx in advance

i got d solution in this thread
Hi all,
data: gv_line(6000) type c.
Bvbapkom = gv_line.
But i am getting the Error like : gv_line and Bvbapkom are not mutually convertable.
Note: Bvbapkom is a Structure
How do i solve this ?
Mahesh
KR
Posts: 210
Registered: 11/24/06
Forum Points: 0
Re: gv_line and Bvbapkom are not mutually convertable.
Posted: Nov 30, 2007 8:40 AM    in response to: KR         Reply
Hi ,
i got the solution
ANSWER:
Field-symbols: <X_Bvbapkom> type x,
<X_gv_line> type x.
Assign: Bvbapkom to <X_Bvbapkom> casting,
gv_line to <X_gv_line> casting.
<X_Bvbapkom> = <X_gv_line>.
Nasaka Ramakris...
Posts: 4
Registered: 1/19/08
Forum Points: 20
Re: gv_line and Bvbapkom are not mutually convertable.
Posted: Jan 19, 2008 7:42 AM    in response to: KR         Reply
Hi Check this answer.
ANSWER:
Field-symbols: <X_Bvbapkom> type x,
<X_gv_line> type x.
Assign: Bvbapkom to <X_Bvbapkom> casting,
gv_line to <X_gv_line> casting.
<X_Bvbapkom> = <X_gv_line>.

Experts plz help ALV issue

hi all experts
plz help
i have an alv based on object oriented method
in the output i am gettin a toolbar in which i have two buttons like print and export
problem is
when i click on these buttons i am gettin short dump
Field symbol has not yet been assigned.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLKKBL" had to be terminated because
    come across a statement that unfortunately cannot be executed.
plz tel me for printing do i need to wwrite any seperate event or any method for it
plz guide me
thanx in advance .

*& Report ZMULTIPLE_ALV
*REPORT ZMULTIPLE_ALV.
report zrich_0006.
tables: mara.
type-pools: slis.
Internal Tables
data: begin of ialv occurs 0,
      matnr type mara-matnr,
      maktx type makt-maktx,
      end of ialv .
Internal Tables
data: begin of ialv2 occurs 0,
      matnr type mard-matnr,
      werks type mard-werks,
      lgort type mard-lgort,
      end of ialv2 .
      CLASS lcl_event_receiver DEFINITION      Handles Double Click
class lcl_event_receiver definition.
public section.
    methods handle_hotspot_click
       for event hotspot_click of cl_gui_alv_grid
      importing e_row_id.
private section.
endclass.
      CLASS lCL_EVENT_RECEIVER IMPLEMENTATION    Handles Double Click
class lcl_event_receiver implementation.
method handle_hotspot_click.
    perform get_details using e_row_id-index.
endmethod.
endclass.
data: alv_container type ref to cl_gui_custom_container,
      event_receiver type ref to lcl_event_receiver,
      alv_grid type ref to cl_gui_alv_grid,
      alv_container2 type ref to cl_gui_custom_container,
      alv_grid2 type ref to cl_gui_alv_grid,
      ok_code like sy-ucomm,
      fieldcat type lvc_t_fcat,
      gs_layout   type lvc_s_layo,
      fieldcat2 type lvc_t_fcat.
select-options: s_matnr for mara-matnr.
start-of-selection.
perform get_data.
call screen 100.
     Module status_0100 OUTPUT
module status_0100 output.
data: variant type disvariant.
data: lt_exclude type ui_functions.
data: ls_fcat type lvc_s_fcat.
set pf-status '0100'.
set titlebar '0100'.
check alv_container is initial.
Code for first ALV Grid
Create Controls
create object alv_container
         exporting container_name = 'ALV_CONTAINER'.
create object alv_grid
         exporting i_parent = alv_container.
create Event Receiver
create object event_receiver.
clear fieldcat. refresh: fieldcat.
clear: ls_fcat.
ls_fcat-reptext    = 'Material Number'.
ls_fcat-coltext    = 'Material Number'.
ls_fcat-fieldname = 'MATNR'.
ls_fcat-ref_table = 'IALV'.
ls_fcat-hotspot    = 'X'.
ls_fcat-outputlen = '18'.
ls_fcat-col_pos    = 1.
append ls_fcat to fieldcat.
clear: ls_fcat.
ls_fcat-reptext    = 'Material Description'.
ls_fcat-coltext    = 'Material Description'.
ls_fcat-fieldname = 'MATKX'.
ls_fcat-ref_table = 'IALV'.
ls_fcat-outputlen = '40'.
ls_fcat-col_pos    = 2.
append ls_fcat to fieldcat.
gs_layout-grid_title = 'Flights'(100).
CALL METHOD alv_grid->SET_TABLE_FOR_FIRST_DISPLAY
    EXPORTING
     I_BUFFER_ACTIVE               =
     I_BYPASSING_BUFFER            =
     I_CONSISTENCY_CHECK           =
     I_STRUCTURE_NAME              =
     IS_VARIANT                    =
     I_SAVE                        =
     I_DEFAULT                     = 'X'
      IS_LAYOUT                     = gs_layout
     IS_PRINT                      =
     IT_SPECIAL_GROUPS             =
     IT_TOOLBAR_EXCLUDING          =
     IT_HYPERLINK                  =
     IT_ALV_GRAPHICS               =
     IT_EXCEPT_QINFO               =
     IR_SALV_ADAPTER               =
    CHANGING
      IT_OUTTAB                     = ialv[]
      IT_FIELDCATALOG               = fieldcat[]
     IT_SORT                       =
     IT_FILTER                     =
   EXCEPTIONS
     INVALID_PARAMETER_COMBINATION = 1
     PROGRAM_ERROR                 = 2
     TOO_MANY_LINES                = 3
     OTHERS                        = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
call method alv_grid->set_table_for_first_display
     changing
          it_outtab       = ialv[]
          it_fieldcatalog = fieldcat[].
handler for ALV grid
set handler event_receiver->handle_hotspot_click for alv_grid.
Code for second ALV Grid
Create Controls
create object alv_container2
         exporting container_name = 'ALV_CONTAINER2'.
create Event Receiver
create object alv_grid2
         exporting i_parent = alv_container2.
clear fieldcat. refresh: fieldcat.
clear: ls_fcat.
ls_fcat-reptext    = 'Material Number'.
ls_fcat-coltext    = 'Material Number'.
ls_fcat-fieldname = 'MATNR'.
ls_fcat-ref_table = 'IALV2'.
ls_fcat-outputlen = '18'.
append ls_fcat to fieldcat2.
clear: ls_fcat.
ls_fcat-reptext    = 'Plant'.
ls_fcat-coltext    = 'Plant'.
ls_fcat-fieldname = 'MATNR'.
ls_fcat-ref_table = 'IALV2'.
ls_fcat-outputlen = '4'.
append ls_fcat to fieldcat2.
clear: ls_fcat.
ls_fcat-reptext    = 'Store Loc'.
ls_fcat-coltext    = 'Store Loc'.
ls_fcat-fieldname = 'LGORT'.
ls_fcat-ref_table = 'IALV2'.
ls_fcat-outputlen = '4'.
append ls_fcat to fieldcat2.
call method alv_grid2->set_table_for_first_display
       changing
           it_outtab       = ialv2[]
           it_fieldcatalog = fieldcat2[].
endmodule.
     Module USER_COMMAND_0100 INPUT
module user_command_0100 input.
case sy-ucomm.
    when 'BACK' or 'CANC'.
      if not alv_container is initial.
        call method alv_container->free.
        clear: alv_container.
        free : alv_container.
      endif.
      if not alv_container2 is initial.
        call method alv_container2->free.
        clear: alv_container2.
        free : alv_container2.
      endif.
      if sy-subrc = 0.
        set screen 0.
        leave screen.
      else.
        leave program.
      endif.
endcase.
endmodule.
      FORM GET_DATA.
form get_data.
select maramatnr maktmaktx
             into corresponding fields of table ialv
                 from mara
                      inner join makt
                         on maramatnr = maktmatnr
                                where mara~matnr in s_matnr
                                  and makt~spras = sy-langu.
sort ialv ascending by matnr.
endform.
      FORM GET_MORE_DATA.
form get_more_data.
select matnr werks lgort
             into corresponding fields of table ialv2
                 from mard
                           where matnr = ialv-matnr.
sort ialv2 ascending by matnr.
endform.
GET_DETAILS
form get_details using index.
read table ialv index index.
if sy-subrc = 0.
    perform get_more_data.
    call method alv_grid2->refresh_table_display.
endif.
endform.

Regarding BW Data Load Errors .. plz help me BW Experts

hi bw experts,
when the loads are coming from R/3 to BW System. if it gets failed we will be getting some errors like
error -1 - related to file opening
error - 4 - related to data problems
can u plz tell me where all these error no's and their completed description is stored or can be found.
will they reside in a table/ any tcode
plz help me..
vijay..

Hi,
What exactly happening while loading data from R/3 to BW.
Can you clear about this.
R u getting any Short dump, then check in t code:ST22
also check the job log monitor.
Let us know more details..
Reg
Pra

Just bought 13 inch macbook pro OS X 10.7 Lion.System getting hung on browsing internet from Day 1, plz help.

Just bought 13 inch macbook pro OS X 10.7 Lion.
System getting hung on browsing internet from Day 1
Really getting irritated.
plz help.

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Error while opening a module. plz help me, very urgent.

when i try to open a module, the following error message appears on my screen.
          " no j2ee component found in d:\krisp\programs\servlets".
          i've installed bea in c: drive and my servlet program is in d: drive.
          plz help me, it's very urgent.

Can you provide some more information? What were you doing when this happened?
          Can you post the entire error message?
          -- Rob
          WLS Blog http://dev2dev.bea.com/blog/rwoollen/

Hi when i open my application folder, all the application is shown in trash folder. when i click the application it says this app is in trash first move it out. and when i try to open through finder go it says this file doesn't exist. can some1 plz help?

hi when i open my application folder, all the application is shown in trash folder. when i click the application it says this app is in trash first move it out. and when i try to open through finder> go it says this file doesn't exist. can some1 plz help? how can i put all my application through application folder?

Something really odd is going on. In your first screen shot, I noticed that the Applications folder does not have the proper icon displayed in the side bar. Also, in the title bar it lists it as Applications 08-59-29-909.
Not sure where it's picking up that odd name, unless it's because it's still truly within the Trash folder.
Try this. In the Finder > Preferences > General > turn on "Always open folders in a new window". (I have a feeling you have the default setting with this off).
Now, in Finder > Go > move down and open the Applications Folder from there. Now open the folder where you see all your applications that you show in your screen shot, select all, and move them to this true appliactions folder.
This is what you should properly seeing (but with different apps listed):
See how the Applications folder has the icon of the letter A shaped with a pencil, ruler & pen.

How to select the download location? its automatically downloading to users folder in c drive. i wanna change it..plz help me out......

how to select the download location? its automatically downloading to users folder in c drive.. i wanna change to my desktop...plz help me out...

Tools -> Options -> Save files to -> Click browse button and browse for folder where you want to save the file.

How to print text/data in flex 3 using printer???Plz help...

   Hi,
          plz tell me the way to print text/data using printer in flex. I tried the FlexPrintJob class. but it takes object of a container to be printed & prints the visible content of that container(along with scrollbars), bt i want to print all contents of the container(including invisible).
      I have tried to print bitmap image through FlexPrintJob but it takes lot of time for spooling... So plz help me out in printing(fast with all content) in flash
I am using flex 3 (flex Builder 3 IDE).
Thanks in advance!!!

Hi Sagar,
Don't worry You can use the below work around to print all the contents of the Container including the invisible contents under scrolll with out scroll bar..
So what the idea here is we are seeting the container height to full size with out scrolls before sending the container object to printer and as soon as you print the object you are restoring it to the original height with scrolls...so that you can print the full contents without scrolls...
You may have doubt that by chnaging and restoring the size the user may see momentary resize of the container but it is not so as it is a fraction of a second and user cannot notice this change... Give it a try ..I had already run into this problem recently and I have found a work around for this which is as below:
// Here mainContainer is the container or box id the contents of which you want to print
   private function doPrintContainer():void
    var printJob:FlexPrintJob = new FlexPrintJob();
    if(printJob.start() != true) return;
    try
     var mainContainerHeight:int = mainContainer.height;
     //Increasing the height of the desired component to be printed.
     mainContainer.height = mainContainer.measuredMinHeight;
     mainContainer.verticalScrollPolicy = "off";
     //Adding the resized Component to our FlexPrintjob and then sending the print request
     printJob.addObject(this,FlexPrintJobScaleType.MATCH_WIDTH);
     printJob.send();
     //Resizing the component back to normal size
     mainContainer.height = mainContainerHeight;
     mainContainer.verticalScrollPolicy = "auto";
    catch(error:Error)
                 trace("Error : " + error.message);
If this post answers your question or helps, please kindly mark it as such.
Thanks,
Bhasker Chari

My ipod touch 5th generation wont download apps and let m e use them!!! Plz Help me fast!

I have an i pod touch 5 and I try to download a new app from the app store so i goto the app store and click download then click it again to install it and it installs but it dont leave an app icon on the home page so i go back to the app store and it says open in a ble box so i click open and it dont open it just keeps saying open and it wont open! please help me!!!!!!!!!!!

I ment blue not ble sorry but plz help!

Help my iPod won't let me download apps... I'll put my password in then it takes me to the app but then is just goes away then I do it again an it won't load or it will just go away again plz help I want to get apps

Help my iPod won't let me download apps... I'll put my password in then it takes me to the app but then is just goes away then I do it again an it won't load or it will just go away again plz help I want to get apps

You said you updated yur 1G iPod to 4.2.1. A 1G can only go to 3.1.3 and thus you must have jailbroken it to get to 4.2.1 and that can cause problems.
ArealDJ wrote:
I have the same problem.. apps won't download and won't open. I have a 1st Gen ipod touch and recently upgraded my MacBook Pro (2012) and as soon as I upgraded the iPod Touch to 4.2.1, this happened. I restored to factory defaults and still cannot dl and open apps. Any way to diagnose this problem? Apple tech charges $29.99 for out of warranty products and if I am reluctant to pay with them telling me its simply a hardware problem.

I restored my Macbook Pro and now I can't log in as Admin - it says there is an error with FileVault and I don't have access - plz help! thank you.

I had to restore my Macbook Pro from Time Capsule yesterday and now when I go to log in as my usual Admin, it says there is a FileVault error and my access is denied. I created another temporary Admin acct, but everything I had on my desktop, etc is "gone" I can look up the "drive' or wahtever it's called, but I can't access any of it. All I want to do is log back in as my usual self (the regular Admin) - plz help! Thanks. p.s. I"m (obviously) not that computer savvy!

Triple-click the line below to select it:
/System/Library/CoreServices/Directory Utility.app
Rght-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu.* The application Directory Utility will open.
In the Directory Utility window, click the lock icon and authenticate. Select the Directory Editor tool in the toolbar. Select Users from the Viewing menu in the toolbar, if not already selected. Select the affected user account in the list. On the right is a list of properties and values. Select the property "HomeDirectory" and delete it by clicking the minus-sign icon directly below the property list. There are two such icons in the window. You want the one on the right, not the one on the left.
CAUTION: Do not click the minus-sign icon on the left, below the user list.
Then click the Save button in the lower right corner of the window. Quit Directory Utility.
CAUTION: There is no "undo" in Directory Utility. If you make a mistake and delete something in the Directory Editor that should not have been deleted, restore your whole system from a backup and start over. I have no other help to offer in that case.
Try again to log in as the affected user. If you can log in, you should find a file in the home folder with the name of the user and the filename extension "sparseimage" or "sparsebundle". Double-click that file. A disk image should open. Copy your files from that disk image to restore them.
I strongly suggest that you deactivate legacy FileVault in the Security & Privacy preference pane, then log out and log back in. Consider activating FileVault 2 if you want that kind of security.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

Error in variables,plz help me

I created a variable del_var.The sql query assosiated with this variable is.
Delete from schema.file_name_table where rownum=1;
After refreshing it.it is deleting first row in the table.But it is resulting in an error
"17003 : null : java.sql.SQLException: Invalid column index java.sql.SQLException: Invalid column index "
Plz help me

Hi,
You can't use a 'Delete" command at a refreshing variable because at a refresch the variable need to receive a value back and the delete doesn't return value.
Change the command to "select....."
Does it make sense to you?

Plz help f.01 dump

Similar Messages

Maybe you are looking for