Plz help i have capturing problem.......

I'm using SONY HDVCAM(HDD)
Capturing with SONY HVR DR60 keeps asking me to render for audio alone...is there any ways which will not ask me for audio render....

.dv is a 'dv stream', much like what iMovie captures. You should be using an FCP (.mov) compatible codec, like DV-NTSC for MiniDV.
What are the full specs on the originally shot media?

Similar Messages

After updating to iOS 6 my battery life of iPad 2 has reduced drastically..plz help..have tried all the standard solutions suggested in forums but doesn't help

After updating to iOS 6 my battery life of iPad 2 has reduced drastically..plz help..have tried all the standard solutions suggested in forums but doesn't help

The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Hi every one can any one help i have a problem in importing java dump for

hi every one can any one help i have a problem in importing java dump for solman 4.0 mssql 2005 sr3

Hi wahed,
Please elobrate question not clear.
Regards,
Shahed iqbal

Finder on my mac book pro is not showing the sidebar plz help .i have a mac book pro running on os x lion 10.7.5

finder on my mac book pro is not showing the sidebar plz help .i have a mac book pro running on os x lion 10.7.5

In Finder, Click View, then Show Sidebar - or ALT+CMD+S

I forgot my i cloud id plz help i have i phone5 a1428

i forgot my i cloud id plz help i have i phone5 a1428

Go here:
https://iforgot.apple.com/appleid

My iphone is not syching at itunes. Everytime it says your iphone as been diconnected whenever I try to synch it, while logo on phone and itunes says it is still connected. help I have this problem with both my Iphone4 and Iphone5 with backup as well

My iPhone is not synching at iTunes. Every time it says your iPhone as been disconnected whenever I try to synch it, while logo on phone and iTunes says it is still connected. help I have this problem with both my Iphone4 and Iphone5. This problem is with the back up as well.

Hi singhgurwinder79,
The article linked below provides details that can help troubleshoot this error and get your iPhone to sync correctly with iTunes.
iTunes: Resolve USB-related alerts
http://support.apple.com/en-us/HT203843
Regards,
Allen

I have problem with daq..when it is connected with laptop it asks for all the options like sampling rate etc..It displays building VI and it stops..it is not processing further..cau u plz help to solve this problem

i hav problem with daq initialisation...plz help to solve the above mentioned issue

Hi muthu,
we also have a problem: to less information…
- What is connected to your laptop?
- What is "it" in "it displays building VI"? Do you use the DAQ Assistent ExpressVI?
- What means "plz"?
And could you please put less text in the title of your message and more text (with relevant information) into the message body?
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Plz help i have trouble

Hello i have a trouble in my nokia N97
my problem is that i have only 2 mega free in my C memory and i dont have any pics or messages or any thing on it and when i make memory detail for C what i found is SIS AOOKICATIONS is 32 MB and Other friles 38 MB
can u plz describe for me what is sis and other files and how can i only fromat C and why not all apllications downloaded on mass memory even i make the option in ovi store plz plz help
THANKS
Moderator's note: Email address removed. It is not wise to publish your personal information on a public forum.

@amro_1230
Remember to backup essential data first but you can reset device to "Out of box" state by three keys depressed power on as for N97 described here:http://mynokiablog.com/2009/07/18/how-to-hard-reset-your-nokia-n97/
Happy to have helped forum with a Support Ratio = 42.5

Help I Have A Problem With Nokia Software Updater

Hi
I have This Problem With My Software
Please Show Me any Way To Fix it
Note 1*:I Used This Software on thisComputer but when i chang my windows it doesnt work
Note 2*:after that when i used software (once time) it didnt work because of that i changed my windows
Attachments:
1.JPG ‏24 KB

first its ok
then
translation:
For a better connection please insert the usb-cable directly in to the computer and not trough a usb-hub or -keybord or a dockingstation of a laptop.
Nokia Software Updater has tried downloading the software, but this is failed 4 times.
Its posible that it can be caused by a bad, slow or instable internet connection.
This failure can also occur because we have maybe a problem with our servers.
try later again
i tried it on 2 PCs one with vista and one with XP plz help me
Message Edited by progunnl on 13-Mar-2009 02:50 PM

PLZ help me w/ battery problem

ok i bought my ipod mini last may. 4 the past few months, after i charge it 4 4 hrs, ill listen to maybe 3 songs, and a 45 min long podcast and then it dies w/ the "battery out of power, pls connect ipod 2 pwr". i brought it in 2 da apple store, they tested it and sed it worked 17 hrs. i continued to have the same problem. i have called them on the phone and sum1 told me that i cant exchange or return it after 14 days.
the warranty only works that if they find a prob, theyll fix it or replace ur ipod.
i relly am losing patience. i h8 the apple co. their products r cheap, i wasted 200 dollars on this and it wont work. dont they realize the ipod minis have so many problems- they stopped making them.
i only have 3 months left on my warranty- PLZ HELP ME!!!
Windows XP

Jeff Bryan is right… absolutly right… But, let me give you my experience… I had, and I wrote this post two days ago, a big Battery problem… I repeat : When I inadvertendly updated my iPod Mini first generation into the new one (1.4, then 1.4.1 in order to correct the bug), my iPod started to bug… The bug was : after 30 minutes, or 1 seconds (as soons as I turned it on), or 10 minutes, — in few words it depended on the iPod —, it cuts violently off… Imagine my head hearing a sudden cut-off whereas you were listening a The Ruts "Jah war", or the Fall "New face in ****" (that were my face which was in ****, in fact), or a Joy Division's "The Kill", or a Clap your Hand say Yeah… I don't know… Imagine my face… Well I posted plenty of posts in French Mac discussions, then in Apple Discussions, in order to find solutions… I received great advices from for instance Jeff Bryan, and of course french iPod users… But nobody understood why the update software was the origin of the battery problem… I called Apple France, they answered to me that there was not a Battery problem (they were right because before updating, the iPod used to run for 7 hours)… They adviced me to reset, reset, untill it corrects the bug… That I did… But, in fact, I wrongly reseted… and I was able to correct it… yesterday, I was pretty upset seeing all around me with their Nano, their Video, or their Photo, OR their MINI∞ whatever… I reseted one more time and suddenly, a page with all languages (the famous first page you have when you just formated it), which meant that I correctly reseted… I was very ashamed because, till yesterday I wrongly reseted it… Now… after a little bug, it works… I succeeded to get over the third (because after updating it into the 1.4, 1.4.1, it cut off after a third iPod listenning… and even though I went back with the 1.1, then the 1.3, it cut off after a third iPod listenning… What a stress !!)… So if you are sure that this is not a Battery problem, I mean if before this problem you usually had no problem battery, I advice you to reset it carefully…
I would like to thank Jeff Bryan for his great advices…

Plz help me ،My wireless problem

Hi
I bought a MacBook Pro(md 212)
I'm having trouble to connect to wireless
Computer does not find any wireless
When the computer finds the wireless،It is not connected to "conection time out"
os x version is 10,8,4
plz help me
i need connect to the wireless

Information.
Wireless Diagnostics - About
Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)
Wireless Diagnostics - About

Plz help with me gui problem(arraylist)

my program
stocksymbol ------------------ stockname ------------------ enter
(label) (textfield) (label) (textfield) (button)
create a gui application using jframe and jpanel so that user can enter stock details(symbol,name) when user press "enter(button)" the text entered in the textfield should be add to an arraylist.
when we close the window ,we have to print the items present in the arraylist....
i have created all the components but iam getting difficult in display the arraylist when i close the window
i have created these classes
public class Stock {?}
public class StockEntryFrame extends JFrame {
// code to allow the frame to handle a window closing event ? when the window is closed,
// the stock list should be printed. ?
public class StockEntryPanel extends JPanel {
public StockEntryPanel(ArrayList<Stock> stockList) {
can u plz help me how to diplay the contents in arraylist

MY PROGRAM IS LIKE THIS:::::::::
STOCKNAME-----------
STOCKSYMBOL---------
STOCK PRICE--------
ENTER(BUTTON)
WHEN USER ENTERS HIS INPUT IN THE TEXT BOX AND PRESS ENTER, THEN THE TEXT PRESENT IN THE TEXTBOX SHOULD BE ENTERED INTO AN ARRAYLIST.
THIS IS A GUI PROGRAM......
WHEN WE CLOSE THE FRAME ,WE HAVE TO DISPLAY THE CONTENTS PRESENT IN THE ARRAYLIST
I HAVE CREATED THE PROGRAM LIKE THIS
CLASS STOCKENTRYPANEL EXTENDS JPANEL
//ADDING ALL THE COMPONETNS TO THE PANEL
CLASS STOCKENTRY FRAME EXTENDS JFRAME
//ADDING PANEL TO THE FRAME
//I NEED THE CODE HERE
WHEN WE CLOSE THE WINDOW THE ARRAYLIST DETAILS SHOULD BE PRINTED
}

I am unable to verify my account info plz help I have 100$ but can't purchase any app

I am unable to verify my apple I'd account information and can no more purchase apps.plz help

Is it giving you a message saying your Apple ID has been disabled? If so, you need to use Apple Express Lane

Table control small Issues , Plz help in tracing the problem

Hello John , Rich , Anand & all
My sorting is working fine but thr is small problem
1. user has habit of pressing enter after everything,
    after entering the values in editable fields in Table control , it doesnt retain the entered values but if he presses save button immediately after entering values , it saves .
how 2 hold the values after pressing enter button
2. Now with this code , it saves the table control content but doesnt display the latest values immediately on the screen .
3. User doesnt want to press SAVE button , he wants save the Table control content by pressing ENTER button,
What is the OK_CODE value for Enter Button plz ?
Plllllzzzzz help me for god sake ASAP.
<u><b>Everyone whoever make an attempt is going to get 10 pnts.</b></u>
==========================
FLOW Logic
PROCESS BEFORE OUTPUT.
MODULE SET_STATUS.
LOOP AT ITAB
WITH CONTROL TCL1
CURSOR TCL1-CURRENT_LINE .
MODULE SET_LINE_COUNT .
ENDLOOP.
PROCESS AFTER INPUT.
MODULE GET_OK_CODE .
MODULE EXIT_COMAND AT EXIT-COMMAND.
MODULE SCROLL_SORT.
LOOP AT ITAB.
MODULE UPDATE_MOD.
ENDLOOP.
==========================
REPORT ZSD_REP_ORDER_BANK_CHANGE NO STANDARD PAGE HEADING LINE-SIZE 255.
TABLES: VBAK,VBAP,VBRK,ZSD_TABL_ORDBANK,MARA,KONV.
CONTROLS: TCL1 TYPE TABLEVIEW USING SCREEN 0200.
DATA: ITAB LIKE ZSD_TABL_ORDBANK OCCURS 0 WITH HEADER LINE,
      WA_ITAB LIKE ZSD_TABL_ORDBANK,
      OK_CODE LIKE SY-UCOMM,
      SAVE_OK_CODE LIKE SY-UCOMM,
      UPD_OK_CODE LIKE SY-UCOMM,
      ANSWER TYPE C,
      I LIKE SY-LOOPC ,
      J LIKE SY-LOOPC,
      V_LINES LIKE SY-LOOPC,
      LINE_COUNT LIKE SY-LOOPC,
      STS TYPE N,
      EMGRP LIKE MARA-EXTWG,
      QTY LIKE ZSD_TABL_ORDBANK-QTY,
      UPRICE LIKE ZSD_TABL_ORDBANK-UPRICE,
      TOT LIKE ZSD_TABL_ORDBANK-TOT,
      INO LIKE VBAP-POSNR,
      COL TYPE CXTAB_COLUMN,
      COPIED_ONCE ,
      FLDNAME(100),HELP(100).
FIELD-SYMBOLS:
     <FS_ITAB> LIKE LINE OF ITAB,
     <FS_TCL1> LIKE LINE OF TCL1-COLS.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECT-OPTIONS: S_CCODE FOR ZSD_TABL_ORDBANK-CCODE
                          NO INTERVALS NO-EXTENSION OBLIGATORY,
                  S_SORG FOR ZSD_TABL_ORDBANK-SORG
                          NO INTERVALS NO-EXTENSION OBLIGATORY,
                  S_DCHAN FOR ZSD_TABL_ORDBANK-DISTCHAN,
                  S_DIV FOR ZSD_TABL_ORDBANK-DIV,
                  S_MATNO FOR ZSD_TABL_ORDBANK-MATNO,
                  S_CUSTNO FOR ZSD_TABL_ORDBANK-CUSTNO ,
                  S_QTNO FOR ZSD_TABL_ORDBANK-QTNO,
                  S_QTDAT FOR ZSD_TABL_ORDBANK-QTDAT,
                  S_QTVDAT FOR ZSD_TABL_ORDBANK-QTVALDAT,
                  S_SONO   FOR ZSD_TABL_ORDBANK-SONO.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN.
   SELECT * FROM ZSD_TABL_ORDBANK
               INTO TABLE ITAB
               WHERE CCODE IN S_CCODE
                 AND SORG IN S_SORG
                 AND DISTCHAN IN S_DCHAN
                 AND DIV IN S_DIV
                 AND MATNO IN S_MATNO
                 AND CUSTNO IN S_CUSTNO
                 AND QTNO IN S_QTNO
                 AND QTDAT IN S_QTDAT
                 AND QTVALDAT IN S_QTVDAT
                 AND SONO IN S_SONO .
      IF SY-SUBRC EQ 0.
         REFRESH ITAB.
         CLEAR COPIED_ONCE.
         CALL SCREEN 0200.
      ELSE.
         MESSAGE E012(ZQOTBANK) .
      ENDIF.
*&      Module SET_STATUS OUTPUT
      text
MODULE SET_STATUS OUTPUT.
SET PF-STATUS '0200'.
SET TITLEBAR '0200'.
    IF COPIED_ONCE IS INITIAL.
      SELECT * FROM ZSD_TABL_ORDBANK
               INTO TABLE ITAB
               WHERE CCODE IN S_CCODE
                 AND SORG IN S_SORG
                 AND DISTCHAN IN S_DCHAN
                 AND DIV IN S_DIV
                 AND MATNO IN S_MATNO
                 AND CUSTNO IN S_CUSTNO
                 AND QTNO IN S_QTNO
                 AND QTDAT IN S_QTDAT
                 AND QTVALDAT IN S_QTVDAT
                 AND SONO IN S_SONO .
      IF SY-SUBRC EQ 0.
        DESCRIBE TABLE ITAB LINES V_LINES.
        TCL1-LINES = V_LINES.
      ENDIF.
      COPIED_ONCE = 'X'.
      REFRESH CONTROL 'TCL1' FROM SCREEN '0200'.
   ENDIF.
      LOOP AT ITAB.
         QTY = ITAB-QTY.
         UPRICE = ITAB-UPRICE.
         TOT = QTY * UPRICE .
         ITAB-TOT = TOT .
         CLEAR: QTY, UPRICE, TOT.
         QTY = ITAB-CGL_QTY.
         UPRICE = ITAB-CGL_UPRICE.
         TOT = QTY * UPRICE .
         ITAB-CGL_TOT = TOT .
         CLEAR: QTY, UPRICE, TOT.
         QTY = ITAB-BHEL_QTY.
         UPRICE = ITAB-BHEL_UPRICE.
         TOT = QTY * UPRICE .
         ITAB-BHEL_TOT = TOT .
         CLEAR: QTY, UPRICE, TOT.
         QTY = ITAB-ALSTOM_QTY.
         UPRICE = ITAB-ALSTOM_UPRICE.
         TOT = QTY * UPRICE .
         ITAB-ALSTOM_TOT = TOT .
         CLEAR: QTY, UPRICE, TOT.
         QTY = ITAB-SIEMENS_QTY.
         UPRICE = ITAB-SIEMENS_UPRICE.
         TOT = QTY * UPRICE .
         ITAB-SIEMENS_TOT = TOT .
         CLEAR: QTY, UPRICE, TOT.
         QTY = ITAB-TELK_QTY.
         UPRICE = ITAB-TELK_UPRICE.
         TOT = QTY * UPRICE .
         ITAB-TELK_TOT = TOT .
         CLEAR: QTY, UPRICE, TOT.
         QTY = ITAB-OTH_QTY.
         UPRICE = ITAB-OTH_UPRICE.
         TOT = QTY * UPRICE .
         ITAB-OTH_TOT = TOT .
         CLEAR: QTY, UPRICE, TOT.
         MODIFY ITAB.
      ENDLOOP.
ENDMODULE.                 " SET_STATUS OUTPUT
*&      Module SET_LINE_COUNT INPUT
      text
MODULE SET_LINE_COUNT OUTPUT.
LINE_COUNT = SY-LOOPC.
ENDMODULE.                 " SET_LINE_COUNT INPUT
*&      Module GET_OK_CODE INPUT
      text
MODULE GET_OK_CODE INPUT.
IF OK_CODE = 'SAVE'.
     UPD_OK_CODE = OK_CODE.
ENDIF.
ENDMODULE.                 " GET_OK_CODE INPUT
*&      Module EXIT_COMAND INPUT
      text
MODULE EXIT_COMAND INPUT.
SAVE_OK_CODE = OK_CODE.
CLEAR OK_CODE.
CASE SAVE_OK_CODE.
    WHEN 'BACK'.
      CALL FUNCTION 'POPUP_TO_CONFIRM'
        EXPORTING
          TITLEBAR       = 'Order Bank Entry'
          TEXT_QUESTION = 'Do you want to Go BacK ?'
          TEXT_BUTTON_1 = 'Yes'
          TEXT_BUTTON_2 = 'No'
          DEFAULT_BUTTON = '2'
        IMPORTING
          ANSWER         = ANSWER.
      IF ANSWER = '1'.
        LEAVE TO SCREEN 0.
      ELSE.
      ENDIF.
    WHEN '%EX'.
      CALL FUNCTION 'POPUP_TO_CONFIRM'
        EXPORTING
          TITLEBAR       = 'Order Bank Entry'
          TEXT_QUESTION = 'Do you want to Exit ?'
          TEXT_BUTTON_1 = 'Yes'
          TEXT_BUTTON_2 = 'No'
          DEFAULT_BUTTON = '2'
        IMPORTING
          ANSWER         = ANSWER.
      IF ANSWER = '1'.
        LEAVE TO SCREEN 0.
      ELSE.
      ENDIF.
ENDCASE.
ENDMODULE.                 " EXIT_COMAND INPUT
*&      Module SCROLL INPUT
      text
MODULE SCROLL_SORT INPUT.
SAVE_OK_CODE = OK_CODE.
CLEAR OK_CODE.
CASE SAVE_OK_CODE.
WHEN 'P--'.
      TCL1-TOP_LINE = 1.
WHEN 'P-'.
      TCL1-TOP_LINE = TCL1-TOP_LINE - LINE_COUNT.
      IF TCL1-TOP_LINE LE 0.
         TCL1-TOP_LINE = 1.
      ENDIF.
WHEN 'P+'.
      I = TCL1-TOP_LINE + LINE_COUNT.
      J = TCL1-LINES - LINE_COUNT + 1.
      IF J LE 0.
         J = 1.
      ENDIF.
      IF I LE J.
         TCL1-TOP_LINE = I.
      ELSE.
         TCL1-TOP_LINE = J.
      ENDIF.
WHEN 'P++'.
      TCL1-TOP_LINE = TCL1-LINES - LINE_COUNT + 1.
      IF TCL1-TOP_LINE LE 0.
          TCL1-TOP_LINE = 1.
      ENDIF.
WHEN 'SORTUP'.
      READ TABLE TCL1-COLS ASSIGNING <FS_TCL1> WITH KEY SELECTED = 'X'.
      IF SY-SUBRC = 0.
          SPLIT <FS_TCL1>-SCREEN-NAME AT '-' INTO HELP FLDNAME.
          SORT ITAB ASCENDING BY (FLDNAME).
      ENDIF.
WHEN 'SORTDN'.
      READ TABLE TCL1-COLS ASSIGNING <FS_TCL1> WITH KEY SELECTED = 'X'.
      IF SY-SUBRC = 0.
          SPLIT <FS_TCL1>-SCREEN-NAME AT '-' INTO HELP FLDNAME.
          SORT ITAB DESCENDING BY (FLDNAME).
      ENDIF.
ENDCASE.
ENDMODULE.                 " USER_COMMAND INPUT
*&      Module UPDATE_MOD INPUT
      text
MODULE UPDATE_MOD INPUT.
CASE UPD_OK_CODE.
WHEN 'SAVE'.
      UPDATE ZSD_TABL_ORDBANK FROM ITAB .
      STS = SY-SUBRC .
      IF STS NE 0.
           MESSAGE E003(ZQOTBANK) .
      ENDIF.
ENDCASE.
ENDMODULE.                 " UPDATE_MOD INPUT
Thnx
Moni
Message was edited by: md monirujjaman

PROCESS BEFORE OUTPUT.
MODULE SET_STATUS.
LOOP AT      ITAB
      WITH    CONTROL TCL1
      CURSOR TCL1-CURRENT_LINE .
   MODULE SET_LINE_COUNT .
ENDLOOP.
PROCESS AFTER INPUT.
MODULE GET_OK_CODE .
MODULE EXIT_COMAND AT EXIT-COMMAND.
MODULE SCROLL_SORT.
LOOP AT ITAB.
      MODULE UPDATE_ITAB.
ENDLOOP.
      MODULE UPDATE_TABLE.
changed modules are ......
*&      Module UPDATE_MOD INPUT
      text
MODULE UPDATE_ITAB INPUT.
    MODIFY TABLE ITAB FROM ITAB.
ENDMODULE.                 " UPDATE_MOD INPUT
*&      Module TABL_UPD INPUT
      text
MODULE UPDATE_TABLE INPUT.
   CASE UPD_OK_CODE.
   WHEN 'SAVE'.
    UPDATE ZSD_TABL_ORDBANK FROM TABLE ITAB .
    IF SY-SUBRC NE 0.
         MESSAGE E003(ZQOTBANK) .
    ENDIF.
   ENDCASE.
ENDMODULE.                 " TABL_UPD INPUT
now i m able 2 get the latest edited values from user immediately i press enter button and getting saved by pressing SAVE button but further problems are, i have one dropdown button for status 1 field , and 1 date field are not getting updated .
So further help plz.

Please Help! More Capturing Problems.

I'm having some trouble capturing footage from onto Final Cut Express HD.
Whenever I try to capture, the footage plays on my screen for about a second, freezes and I get this error message,
"Capture encountered a problem reading the data on your source tape. This could be due to a problem with the tape. Capture has been aborted and you clip has been saved."
I am left with a five second clip from my tape for my trouble. This has only started happening recently, I am using the same setup that I have done before when it was working. I can capture with no issues on imovie.
I have called tech support and they sent me a link that shows how to reinstall final cut and delete all the user preference settings. I have tried different tapes, different sources for saving footage and I still have the exact same problem.
Any more info you need please ask. Please help me, I'm pulling my hair out!
Thanks!

Well, I've captured before when the external drives have been connected, but I disconnected them and retried after resetting everything and I still get the same error.
I've also tried resetting the settings on my XHA1 and deleting all the preferences for final cut express, all the receipts etc. And reinstalling and still I get the same error.
I am shooting in HDV and have tried capturing with both 'HD down-conv' on and off, comp out is 1080i/576i (as it's always been). Set my FCE setting correctly? I've been through preferences and system settings, apart from selecting easy setup>DV-NTSC Firewire Basic and making sure there is space on capture scratch, anything else I need to look out for?

Plz help i have capturing problem.......

Similar Messages

Maybe you are looking for