Plz help i have trouble
Hello i have a trouble in my nokia N97
my problem is that i have only 2 mega free in my C memory and i dont have any pics or messages or any thing on it and when i make memory detail for C what i found is SIS AOOKICATIONS is 32 MB and Other friles 38 MB
can u plz describe for me what is sis and other files and how can i only fromat C and why not all apllications downloaded on mass memory even i make the option in ovi store plz plz help
THANKS
Moderator's note: Email address removed. It is not wise to publish your personal information on a public forum.
@amro_1230
Remember to backup essential data first but you can reset device to "Out of box" state by three keys depressed power on as for N97 described here:http://mynokiablog.com/2009/07/18/how-to-hard-reset-your-nokia-n97/
Happy to have helped forum with a Support Ratio = 42.5
Similar Messages
-
After updating to iOS 6 my battery life of iPad 2 has reduced drastically..plz help..have tried all the standard solutions suggested in forums but doesn't help
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
finder on my mac book pro is not showing the sidebar plz help .i have a mac book pro running on os x lion 10.7.5
In Finder, Click View, then Show Sidebar - or ALT+CMD+S
-
I forgot my i cloud id plz help i have i phone5 a1428
i forgot my i cloud id plz help i have i phone5 a1428
Go here:
https://iforgot.apple.com/appleid -
I am unable to verify my account info plz help I have 100$ but can't purchase any app
I am unable to verify my apple I'd account information and can no more purchase apps.plz help
Is it giving you a message saying your Apple ID has been disabled? If so, you need to use Apple Express Lane
-
Help! Have trouble installing PostScript Type 1 fonts on Windows 7
Hey there. I had a font package by a gift from a friend. As I open the font pack, All of the PostScript Type 1 font has a blank white icon. It's not working. I installed Adobe Type Manager but it's not compatible with my Windows 7 computer. Does anyone know what another font application that can open and install PostScript Type 1 fonts on my Windows 7? Please Help.
Windows Type 1 fonts each consist of two files, a .pfb file containing the font itself and a .pfm file containing extended font metrics used for formatting text on the host computer. If you don't have both files for a particular font, the font is uninstallable and unusable. To install a Type 1 font on a Windows system, the .pfb and .pfm for the font should be in the same directory. Right click on the font and click on Install or Install as shortcut. Install copies the two files to the \Windows\Fonts directory and subsequently uses the font from that location. Install as shortcut uses the font from the location the files are currently located in with the caveat that you must keep those files in that location or else the fonts will no longer be accessible.
If you actually attempted to install Adobe Type Manager on 32-bit Windows 7 (or later) system, you may have destroyed your system's ability to properly install and use Type 1 fonts at all. If this has happened, you may need to reinstall Windows! (If I recall correctly, the installer for ATM refuses to run at all on Windows 64-bit versions, sparing you the destruction of your Type 1 rendering!)
- Dov -
PLEASE HELP i have trouble with WRT54G port forwarding with linksys
Hello guys, i play a game called populous, and since im on a router i cannot host the game, when i used to have a d-link all i would do is have to set up the port to my ip with the udp. but ever since i have swiched to linksys that doesnt work, the ip on my portforwaring is the same as the one on my computer the port is correct and the udp is set, i also have no fire walls on and it still doesnt make a differance, Someone in the game suggested that there is a local ip i need to get? is that true or is there another setting i need to set up in my router page?
PLEASE HELP IF YOU CAN <3<3 thanks
Message Edited by Curtman on 09-07-2007 12:04 PMYes that happens if you write replies to your own posts. Many regulars here only answer their "own" topics (i.e. to which they have answered before) and new ones which don't have replies, yet. If you write a reply to your own topic chances are your are not read unless during some random browsing...
Regarding your problem it is impossible to say anything unless you give the exact settings you have on your router. Please post the full settings you have for port forwardings, port triggering and DMZ. If you have UPnP forwarding in your router (I don't think you have) post those settings, too.
Otherwise I suggest this checklist for troubleshooting port forwardings. -
PLz help i have one dought? IN ORACLE PL/SQL
1.write a block that accepts name and display it 5 times in output screen ?
(this my question i typed like in this SQL>screen but i'm getting out put ony once can u short out in this problem )
1 declare
2 name varchar2(15) :='&name';
3 n number(2) :=1;
4 begin
5 while n <=5
6 loop
7 dbms_output.put_line(name);
8 n :=n+1;
9 end loop;
10* end;
Enter value for name: dfhdfhfd
old 2: name varchar2(15) :='&name';
new 2: name varchar2(15) :='dfhdfhfd';
PL/SQL procedure successfully completed.
[CAN U TEL TEL ME HOW DO IT AND SEND ME THE CORRECT CODING THAT WOULD BE HELP FOR ME .I HAVE LAB WITH MY COURSE]
Regards
D.Muthu
Message was edited by:
user628154Hi
You need to set serveroutput on.You will only get output once you would set it.You mentioned,you are getting one output.You didnt print it here.Where it is?
Three general thngs.
1)Please don't use caps while posting.I hope you know it,in internet chats,forums,it is considered as shouting.
2)Please read Pl/Sql guide from docs.These things are covered in details there.You can read it here.
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14261/toc.htm
3)Always mention your database and o/s version while posting.
Aman.... -
Plz help i have capturing problem.......
I'm using SONY HDVCAM(HDD)
Capturing with SONY HVR DR60 keeps asking me to render for audio alone...is there any ways which will not ask me for audio render.....dv is a 'dv stream', much like what iMovie captures. You should be using an FCP (.mov) compatible codec, like DV-NTSC for MiniDV.
What are the full specs on the originally shot media? -
i have macbook 5.2 and i am using Mac OS 10.5.8 . which one is good for me to upgrade and how to do that..plz help me
You have a 13" Early or Mid 2009 MacBook. Either one can run OS X Mavericks with enough RAM, 2 GB minimum. But first you will need to update to OS X Snow Leopard 10.6.8 so that you have the Mac App Store installed on your MacBook
Buy this from apple;
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Then download and update with this update combo;
OS X Snow Leopard 10.6.8 v1.1 update combo
http://support.apple.com/kb/DL1399
After this you will have the Mac App Store on your MacBook and you should be able to download and install OS X Mavericks for free!
Your MacBook must meet these minimum tech specs to run Mavericks;
http://support.apple.com/kb/HT5842 -
I have iPod Touch 4th Gen. I can purchase game token in 1 game but Not the other!! Get message in other game: "Purchase couldn't be completed...unable to connect to iTunes". I've tried ALL suggestions...PLZ help.
See:
Have yo tried when connect to another wifi network?
Can't connect to the iTunes Store
For the future, saying " I've tried ALL suggestions" provides with zero information as to what you did try -
hi all experts
plz help
i have an alv based on object oriented method
in the output i am gettin a toolbar in which i have two buttons like print and export
problem is
when i click on these buttons i am gettin short dump
Field symbol has not yet been assigned.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLKKBL" had to be terminated because
come across a statement that unfortunately cannot be executed.
plz tel me for printing do i need to wwrite any seperate event or any method for it
plz guide me
thanx in advance .*& Report ZMULTIPLE_ALV
*REPORT ZMULTIPLE_ALV.
report zrich_0006.
tables: mara.
type-pools: slis.
Internal Tables
data: begin of ialv occurs 0,
matnr type mara-matnr,
maktx type makt-maktx,
end of ialv .
Internal Tables
data: begin of ialv2 occurs 0,
matnr type mard-matnr,
werks type mard-werks,
lgort type mard-lgort,
end of ialv2 .
CLASS lcl_event_receiver DEFINITION Handles Double Click
class lcl_event_receiver definition.
public section.
methods handle_hotspot_click
for event hotspot_click of cl_gui_alv_grid
importing e_row_id.
private section.
endclass.
CLASS lCL_EVENT_RECEIVER IMPLEMENTATION Handles Double Click
class lcl_event_receiver implementation.
method handle_hotspot_click.
perform get_details using e_row_id-index.
endmethod.
endclass.
data: alv_container type ref to cl_gui_custom_container,
event_receiver type ref to lcl_event_receiver,
alv_grid type ref to cl_gui_alv_grid,
alv_container2 type ref to cl_gui_custom_container,
alv_grid2 type ref to cl_gui_alv_grid,
ok_code like sy-ucomm,
fieldcat type lvc_t_fcat,
gs_layout type lvc_s_layo,
fieldcat2 type lvc_t_fcat.
select-options: s_matnr for mara-matnr.
start-of-selection.
perform get_data.
call screen 100.
Module status_0100 OUTPUT
module status_0100 output.
data: variant type disvariant.
data: lt_exclude type ui_functions.
data: ls_fcat type lvc_s_fcat.
set pf-status '0100'.
set titlebar '0100'.
check alv_container is initial.
Code for first ALV Grid
Create Controls
create object alv_container
exporting container_name = 'ALV_CONTAINER'.
create object alv_grid
exporting i_parent = alv_container.
create Event Receiver
create object event_receiver.
clear fieldcat. refresh: fieldcat.
clear: ls_fcat.
ls_fcat-reptext = 'Material Number'.
ls_fcat-coltext = 'Material Number'.
ls_fcat-fieldname = 'MATNR'.
ls_fcat-ref_table = 'IALV'.
ls_fcat-hotspot = 'X'.
ls_fcat-outputlen = '18'.
ls_fcat-col_pos = 1.
append ls_fcat to fieldcat.
clear: ls_fcat.
ls_fcat-reptext = 'Material Description'.
ls_fcat-coltext = 'Material Description'.
ls_fcat-fieldname = 'MATKX'.
ls_fcat-ref_table = 'IALV'.
ls_fcat-outputlen = '40'.
ls_fcat-col_pos = 2.
append ls_fcat to fieldcat.
gs_layout-grid_title = 'Flights'(100).
CALL METHOD alv_grid->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT =
I_SAVE =
I_DEFAULT = 'X'
IS_LAYOUT = gs_layout
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
IT_OUTTAB = ialv[]
IT_FIELDCATALOG = fieldcat[]
IT_SORT =
IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
call method alv_grid->set_table_for_first_display
changing
it_outtab = ialv[]
it_fieldcatalog = fieldcat[].
handler for ALV grid
set handler event_receiver->handle_hotspot_click for alv_grid.
Code for second ALV Grid
Create Controls
create object alv_container2
exporting container_name = 'ALV_CONTAINER2'.
create Event Receiver
create object alv_grid2
exporting i_parent = alv_container2.
clear fieldcat. refresh: fieldcat.
clear: ls_fcat.
ls_fcat-reptext = 'Material Number'.
ls_fcat-coltext = 'Material Number'.
ls_fcat-fieldname = 'MATNR'.
ls_fcat-ref_table = 'IALV2'.
ls_fcat-outputlen = '18'.
append ls_fcat to fieldcat2.
clear: ls_fcat.
ls_fcat-reptext = 'Plant'.
ls_fcat-coltext = 'Plant'.
ls_fcat-fieldname = 'MATNR'.
ls_fcat-ref_table = 'IALV2'.
ls_fcat-outputlen = '4'.
append ls_fcat to fieldcat2.
clear: ls_fcat.
ls_fcat-reptext = 'Store Loc'.
ls_fcat-coltext = 'Store Loc'.
ls_fcat-fieldname = 'LGORT'.
ls_fcat-ref_table = 'IALV2'.
ls_fcat-outputlen = '4'.
append ls_fcat to fieldcat2.
call method alv_grid2->set_table_for_first_display
changing
it_outtab = ialv2[]
it_fieldcatalog = fieldcat2[].
endmodule.
Module USER_COMMAND_0100 INPUT
module user_command_0100 input.
case sy-ucomm.
when 'BACK' or 'CANC'.
if not alv_container is initial.
call method alv_container->free.
clear: alv_container.
free : alv_container.
endif.
if not alv_container2 is initial.
call method alv_container2->free.
clear: alv_container2.
free : alv_container2.
endif.
if sy-subrc = 0.
set screen 0.
leave screen.
else.
leave program.
endif.
endcase.
endmodule.
FORM GET_DATA.
form get_data.
select maramatnr maktmaktx
into corresponding fields of table ialv
from mara
inner join makt
on maramatnr = maktmatnr
where mara~matnr in s_matnr
and makt~spras = sy-langu.
sort ialv ascending by matnr.
endform.
FORM GET_MORE_DATA.
form get_more_data.
select matnr werks lgort
into corresponding fields of table ialv2
from mard
where matnr = ialv-matnr.
sort ialv2 ascending by matnr.
endform.
GET_DETAILS
form get_details using index.
read table ialv index index.
if sy-subrc = 0.
perform get_more_data.
call method alv_grid2->refresh_table_display.
endif.
endform. -
PLZ HELP ME PROBLEM :- JSP Pages is slow
HI, i am using oracle 10g application server to deploy my jsp pages.
When i am running the jsp page ie. default.jsp which consist of three combo box which are dependent on each other.
Database :- oracle 10g.
Logic : I am retrieving all the data from the database in to a nested structure and using that nested structure to fill up in the combo box,
Problem : when i m refreshing or opening the page , it takes a lot of time to open. well the data are also not so much huge that it take some time. ]
Plz help meWhy have you declared your own interface Tag?
The server knows nothing about your custom classes.
You should be implementing the javax.servlet.jsp.tagext.Tag Interface.
Actually the easier way is for your tag to extend SimpleTag, which implements the basic interface for you, leaving you to override the bit you want to.
Check out the API: http://java.sun.com/j2ee/1.4/docs/api/javax/servlet/jsp/tagext/package-summary.html -
Hi experts
plz help
i have createed an alv using slis method
in the output there must come a header
in this header i ill have to show som details
like on the left side of the header i want to show the details of the user and on the right side i want to show he data of vendor .
i am able to get the data in the left side but i am not able to show the data of vendor on the right side
the data of vendor is by default coming on left side only just below the details of user but i want to show those details on the right side of the header .
plz tell me how to do it .
thanx in advance.Hi Anit,
I am attaching here the whole Code. It is somewhat big code so go through it thoroughly.If you still face problem reply this thread otherwise <b>REWARD POINT</b>.
REPORT test
MESSAGE-ID zzrefn01
NO STANDARD PAGE HEADING
*** Portrait: 93x80
LINE-SIZE 150
LINE-COUNT 80.
*** Landscape: 132x65
LINE-SIZE 132
LINE-COUNT 65.
INCLUDES **
INCLUDE zbc_i00. "Customer Standard Include
INCLUDE <icon>. "For Button on the ALV Tool Bar
INCLUDE yyef_check_isp_top.
INCLUDE yyef_check_isp_f01.
INCLUDE yyef_check_isp_o01.
INCLUDE yyef_check_isp_i01.
CLASS zcl_event_handler IMPLEMENTATION
CLASS zcl_event_handler IMPLEMENTATION.
Top-of-page event
METHOD top_of_page.
PERFORM event_top_of_page
USING z_dyndoc_id.
ENDMETHOD. "METHOD top_of_page
Change Status Button
METHOD handle_toolbar.
IF NOT pa_prodr IS INITIAL.
DATA: lz_toolbar TYPE stb_button.
CLEAR lz_toolbar.
MOVE 'CHANGE_STATUS' TO lz_toolbar-function.
MOVE text-001 TO lz_toolbar-text.
APPEND lz_toolbar TO e_object->mt_toolbar.
ENDIF. "IF NOT pa_prodr IS INITIAL
ENDMETHOD. "METHOD handle_toolbar
Handle User Command
METHOD handle_user_command.
CASE e_ucomm.
WHEN 'CHANGE_STATUS'.
LOOP AT it_output
INTO wa_output.
IF wa_output-chk_box EQ kc_x.
z_flag = 1.
EXIT.
ENDIF. "IF wa_output-chk_box EQ kc_x
ENDLOOP. "LOOP AT it_output INTO wa_output
IF z_flag EQ 1.
PERFORM display_selected_data.
ELSE.
MESSAGE i001(zzrefn01)
WITH text-023.
ENDIF. "IF z_flag EQ 1
ENDCASE. "CASE e_ucomm
ENDMETHOD. "METHOD handle_user_command
ENDCLASS. "zcl_event_handler IMPLEMENTATION
Processing of selection screen **
First time initialization *
Get Default variant *
INITIALIZATION.
z_repid = sy-repid.
PERFORM variant_init.
zx_variant = z_variant.
CALL FUNCTION 'LVC_VARIANT_DEFAULT_GET'
EXPORTING
i_save = kc_u
CHANGING
cs_variant = zx_variant
EXCEPTIONS
wrong_input = 1
not_found = 2
program_error = 3
OTHERS = 4.
IF sy-subrc EQ 0.
pa_vari = zx_variant-variant.
ELSE.
MESSAGE i001(zzrefn01)
WITH text-021.
ENDIF. "IF sy-subrc EQ 0
*** First time initialization in online mode except calls with variant
*** (is not processed on return from prog to selection screen)
pa_xyz = ....
so_xyz.....
SET PF-STATUS 'STAT1000'.
*** An example for select options restrictions is available
*** in TT1/YYKA_EXPORT_START_HOST (remove comment)
Selection screen PBO *
Comment........ *
AT SELECTION-SCREEN OUTPUT.
*** Init selection screen, also on variants
*** (only for online reports)
IF NOT zn_init_seldynp IS INITIAL
AND sy-batch IS INITIAL "Not on batch calls (e.g. AutoSys)
AND sy-slset IS INITIAL. "Not on calls with variant
IF NOT pa_prodr IS INITIAL.
CLEAR: pa_prodr.
MESSAGE w999(zbcc). "Flag prod.run reseted
ENDIF.
CLEAR: pa_start.
ENDIF.
CLEAR: zn_init_seldynp.
*** Process dynpro fields
LOOP AT SCREEN.
*** --> Read-Only fields
IF screen-group1 EQ 'RDO'
AND screen-input NE '0'
AND screen-group3 NE 'VPU'.
screen-input = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Selection screen PAI *
Comment........ *
*AT SELECTION-SCREEN ON so_xyz.
AT SELECTION-SCREEN.
PERFORM pai_of_selection_screen.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pa_vari.
PERFORM f4_for_variant.
PERFORM btci_at_sel_screen. "Call BTCI checks (optional)
Program **
Main routine *
START-OF-SELECTION.
PERFORM fetch_data.
PERFORM build_data.
PERFORM prepare_field_catalog
CHANGING it_fieldcat.
CALL SCREEN 100.
End routine *
END-OF-SELECTION.
Interactive Reporting **
Comment........ *
AT LINE-SELECTION.
*** Good example in TT1/YIIHART (remove comment)
Comment........ *
AT USER-COMMAND.
PERFORM handle_user_command.
Comment........ *
AT PFN.
iNCLUDE YYEF_CHECK_ISP_F01
*& Include YYEF_CHECK_ISP_F01 *
*& Form pai_of_selection_screen
Check Variant Exist or not
FORM pai_of_selection_screen .
IF NOT pa_vari IS INITIAL.
MOVE z_variant TO zx_variant.
MOVE pa_vari TO zx_variant-variant.
CALL FUNCTION 'LVC_VARIANT_EXISTENCE_CHECK'
EXPORTING
i_save = kc_u
CHANGING
cs_variant = zx_variant
EXCEPTIONS
wrong_input = 1
not_found = 2
program_error = 3
OTHERS = 4.
IF sy-subrc EQ 2.
MESSAGE i001(zzrefn01)
WITH text-024.
ENDIF. "IF sy-subrc EQ 2
z_variant = zx_variant.
ELSE.
PERFORM variant_init.
ENDIF. "IF NOT pa_vari IS INITIAL
ENDFORM. "pai_of_selection_screen
*& Form variant_init
Initialization of Variant
FORM variant_init .
CLEAR z_variant.
z_variant-report = z_repid.
ENDFORM. " variant_init
*& Form f4_for_variant
F4 Help for Layout
FORM f4_for_variant .
CALL FUNCTION 'LVC_VARIANT_F4'
EXPORTING
is_variant = z_variant
i_save = kc_u
IMPORTING
e_exit = z_exit
es_variant = zx_variant
EXCEPTIONS
not_found = 1
program_error = 2
OTHERS = 3.
IF sy-subrc EQ 1.
MESSAGE i001(zzrefn01)
WITH text-022.
ELSE.
IF z_exit = space.
pa_vari = zx_variant-variant.
ENDIF. "IF z_exit = space
ENDIF. "IF sy-subrc EQ 1
ENDFORM. "f4_for_variant
*& Form fetch_data
Fetch data from DB tables.
FORM fetch_data .
SELECT *
FROM yyeft1200
INTO TABLE it_yyeft1200
WHERE id_rech IN so_idrec
AND fnumkred IN so_fnumk
AND status IN so_stat
AND erdat IN so_erdat
ORDER BY PRIMARY KEY.
IF sy-subrc EQ 0.
SELECT *
FROM yyeft1201
INTO TABLE it_yyeft1201
FOR ALL ENTRIES IN it_yyeft1200
WHERE id_rech EQ it_yyeft1200-id_rech
AND artnr_bp IN so_artnr
ORDER BY PRIMARY KEY.
IF sy-subrc EQ 0.
SELECT *
FROM yyeft1008
INTO TABLE it_yyeft1008
FOR ALL ENTRIES IN it_yyeft1201
WHERE bp_refnr EQ it_yyeft1201-bprefnr.
IF sy-subrc EQ 0.
SORT it_yyeft1008[] BY bp_refnr.
ENDIF. "IF sy-subrc EQ 0.
ENDIF. "IF sy-subrc EQ 0.
ELSE.
zn_cancel = kc_x.
ENDIF. "IF sy-subrc EQ 0.
ENDFORM. " fetch_data
*& Form build_data
Gather the data from all the internal tables into one.
FORM build_data .
LOOP AT it_yyeft1200
INTO wa_yyeft1200.
CLEAR wa_output.
wa_output-id_rech = wa_yyeft1200-id_rech.
wa_output-fnumkred = wa_yyeft1200-fnumkred.
wa_output-status = wa_yyeft1200-status.
wa_output-erdat = wa_yyeft1200-erdat.
wa_output-bukrs = wa_yyeft1200-bukrs.
wa_output-belnr = wa_yyeft1200-belnr.
wa_output-gjahr = wa_yyeft1200-gjahr.
IF wa_yyeft1200-status GE kc_status10
AND wa_yyeft1200-belnr IS INITIAL.
wa_output-com_delfnd = 'FI Doc NOT found'(t03).
ENDIF.
IF wa_yyeft1200-status LT kc_status10
AND NOT wa_yyeft1200-belnr IS INITIAL
AND wa_output-com_delfnd IS INITIAL
AND NOT pa_det IS INITIAL.
wa_output-com_delfnd = 'FI Doc should be empty'(t01).
ENDIF.
LOOP AT it_yyeft1201
INTO wa_yyeft1201
WHERE id_rech EQ wa_yyeft1200-id_rech.
wa_output-bprefnr = wa_yyeft1201-bprefnr.
wa_output-lfdat = wa_yyeft1201-lfdat.
wa_output-artnr_bp = wa_yyeft1201-artnr_bp.
READ TABLE it_yyeft1008
WITH KEY bp_refnr = wa_yyeft1201-bprefnr
BINARY SEARCH
TRANSPORTING NO FIELDS.
IF sy-subrc EQ 0.
LOOP AT it_yyeft1008
INTO wa_yyeft1008
FROM sy-tabix.
IF wa_yyeft1008-bp_refnr NE wa_yyeft1201-bprefnr.
EXIT.
ENDIF.
wa_output-id_anlief = wa_yyeft1008-id_anlief.
IF NOT pa_det IS INITIAL
OR NOT wa_output-com_delfnd IS INITIAL.
APPEND wa_output TO it_output.
ENDIF.
ENDLOOP. "LOOP AT it_yyeft1008
ELSE.
CLEAR wa_output-id_anlief.
wa_output-com_delfnd = 'Deliv. NOT found'(t06).
APPEND wa_output TO it_output.
ENDIF.
ENDLOOP. "LOOP AT it_yyeft1201
IF sy-subrc NE 0.
wa_output-com_delfnd = 'No Detail records in YYEFT1201'(e01).
APPEND wa_output TO it_output.
ENDIF. "IF sy-subrc NE 0.
ENDLOOP. "LOOP AT it_yyeft1200
Checkbox Editable for Production Run
IF pa_prodr IS INITIAL.
LOOP AT it_output
INTO wa_output.
zs_style-fieldname = 'CHK_BOX'.
zs_style-style = cl_gui_alv_grid=>mc_style_disabled.
INSERT zs_style INTO TABLE wa_output-celltab.
MODIFY it_output FROM wa_output
TRANSPORTING celltab.
ENDLOOP. "LOOP AT it_output INTO wa_output.
ENDIF. "IF pa_prodr IS INITIAL
LOOP AT it_output
INTO wa_output.
IF wa_output-status GE kc_status10
AND wa_output-belnr IS INITIAL
AND NOT pa_prodr IS INITIAL.
zs_style-fieldname = 'CHK_BOX'.
zs_style-style = cl_gui_alv_grid=>mc_style_enabled.
INSERT zs_style INTO TABLE wa_output-celltab.
MODIFY it_output FROM wa_output
TRANSPORTING celltab.
ENDIF. "IF wa_output-status GE kc_status10
ENDLOOP. "LOOP AT it_output INTO wa_output
ENDFORM. "build_data
*& Form prepare_field_catalog
Field Catalog Preparation
<--PIT_FIELDCAT Field catalog
FORM prepare_field_catalog
CHANGING pit_fieldcat TYPE lvc_t_fcat.
DATA: ls_fcat TYPE lvc_s_fcat.
IF it_output1 IS INITIAL.
Check Box
CLEAR ls_fcat.
ls_fcat-fieldname = 'CHK_BOX'.
ls_fcat-datatype = 'CHAR'.
ls_fcat-intlen = '1'.
ls_fcat-edit = kc_x.
ls_fcat-coltext = text-014.
ls_fcat-checkbox = kc_x.
ls_fcat-outputlen = '5'.
APPEND ls_fcat TO pit_fieldcat.
ENDIF. "IF it_output1 IS INITIAL
ID RECH
CLEAR ls_fcat.
ls_fcat-fieldname = 'ID_RECH'.
ls_fcat-outputlen = '10'.
ls_fcat-coltext = text-002.
APPEND ls_fcat TO pit_fieldcat.
BP Reference
CLEAR ls_fcat.
ls_fcat-fieldname = 'BPREFNR'.
ls_fcat-outputlen = '15'.
ls_fcat-coltext = text-003.
APPEND ls_fcat TO pit_fieldcat.
Delivery date
CLEAR ls_fcat.
ls_fcat-fieldname = 'LFDAT'.
ls_fcat-outputlen = '10'.
ls_fcat-coltext = text-004.
APPEND ls_fcat TO pit_fieldcat.
Article
CLEAR ls_fcat.
ls_fcat-fieldname = 'ARTNR_BP'.
ls_fcat-outputlen = '18'.
ls_fcat-coltext = text-005.
APPEND ls_fcat TO pit_fieldcat.
Account Payable invoice
CLEAR ls_fcat.
ls_fcat-fieldname = 'FNUMKRED'.
ls_fcat-outputlen = '16'.
ls_fcat-coltext = text-006.
APPEND ls_fcat TO pit_fieldcat.
Status
CLEAR ls_fcat.
ls_fcat-fieldname = 'STATUS'.
ls_fcat-outputlen = '2'.
ls_fcat-coltext = text-007.
APPEND ls_fcat TO pit_fieldcat.
Create date
CLEAR ls_fcat.
ls_fcat-fieldname = 'ERDAT'.
ls_fcat-outputlen = '10'.
ls_fcat-coltext = text-008.
APPEND ls_fcat TO pit_fieldcat.
Comment
CLEAR ls_fcat.
ls_fcat-fieldname = 'COM_DELFND'.
ls_fcat-outputlen = '25'.
ls_fcat-coltext = text-009.
APPEND ls_fcat TO pit_fieldcat.
Delivery ID
CLEAR ls_fcat.
ls_fcat-fieldname = 'ID_ANLIEF'.
ls_fcat-outputlen = '10'.
ls_fcat-coltext = text-010.
APPEND ls_fcat TO pit_fieldcat.
Company Code
CLEAR ls_fcat.
ls_fcat-fieldname = 'BUKRS'.
ls_fcat-outputlen = '4'.
ls_fcat-coltext = text-011.
APPEND ls_fcat TO pit_fieldcat.
Accounting Document Number
CLEAR ls_fcat.
ls_fcat-fieldname = 'BELNR'.
ls_fcat-outputlen = '10'.
ls_fcat-coltext = text-012.
APPEND ls_fcat TO pit_fieldcat.
Financial Year
CLEAR ls_fcat.
ls_fcat-fieldname = 'GJAHR'.
ls_fcat-outputlen = '4'.
ls_fcat-coltext = text-013.
APPEND ls_fcat TO pit_fieldcat.
ENDFORM. " prepare_field_catalog
*& Form EVENT_TOP_OF_PAGE
TOP-OF-PAGE Preparation
-->z_dyndoc_id Text of TOP-OF-PAGE
FORM event_top_of_page
USING z_dyndoc_id TYPE REF TO cl_dd_document.
DATA : lz_text(255) TYPE c.
System ID
CLEAR : lz_text.
CONCATENATE text-015
sy-sysid
INTO lz_text
SEPARATED BY space.
PERFORM add_text
USING lz_text.
CALL METHOD z_dyndoc_id->new_line.
Title
CLEAR : lz_text.
CONCATENATE text-016
sy-title
INTO lz_text
SEPARATED BY space.
PERFORM add_text
USING lz_text.
CALL METHOD z_dyndoc_id->new_line.
Date
CLEAR : lz_text.
WRITE sy-datum TO lz_text.
CONCATENATE text-017
lz_text
INTO lz_text
SEPARATED BY space.
PERFORM add_text
USING lz_text.
CALL METHOD z_dyndoc_id->new_line.
User ID
CLEAR : lz_text.
CONCATENATE text-018
sy-uname
INTO lz_text
SEPARATED BY space.
PERFORM add_text
USING lz_text.
CALL METHOD z_dyndoc_id->new_line.
Time
CLEAR : lz_text.
WRITE sy-uzeit TO lz_text.
CONCATENATE text-019
lz_text
INTO lz_text
SEPARATED BY space.
PERFORM add_text
USING lz_text.
CALL METHOD z_dyndoc_id->new_line.
Program Name
CLEAR : lz_text.
WRITE sy-repid TO lz_text.
CONCATENATE text-020
lz_text
INTO lz_text
SEPARATED BY space.
PERFORM add_text
USING lz_text.
CALL METHOD z_dyndoc_id->new_line.
Populating data to TOP-OF-PAGE
PERFORM top-of-page.
ENDFORM. " EVENT_TOP_OF_PAGE
*& Form ADD_TEXT
Add Text To TOP-OF-PAGE
FORM add_text
USING p_text TYPE sdydo_text_element.
CALL METHOD z_dyndoc_id->add_text
EXPORTING
text = p_text.
ENDFORM. " ADD_TEXT
*& Form TOP-OF-PAGE
TOP-OF-PAGE
FORM top-of-page.
CALL METHOD z_dyndoc_id->display_document
EXPORTING
reuse_control = kc_x
parent = z_parent_top
EXCEPTIONS
html_display_error = 1.
IF sy-subrc NE 0.
MESSAGE i001(zzrefn01)
WITH text-036 ' '.
ENDIF. "IF sy-subrc NE 0
ENDFORM. "TOP-OF-PAGE
*& Form handle_user_command
Handle the user command
FORM handle_user_command .
DATA lzi_lin TYPE i.
REFRESH ra_id_rech[].
CLEAR ra_id_rech.
ra_id_rech-sign = kc_include.
ra_id_rech-option = kc_equal.
CASE sy-ucomm.
WHEN kc_ucomm-upd.
DESCRIBE LIST NUMBER OF LINES lzi_lin.
DO lzi_lin TIMES.
CLEAR wa_output.
READ LINE sy-index
FIELD VALUE wa_output-chk_box
wa_output-id_rech.
IF sy-subrc NE 0.
EXIT.
ELSE.
IF wa_output-chk_box EQ kc_x.
ra_id_rech-low = wa_output-id_rech.
APPEND ra_id_rech.
ENDIF.
ENDIF.
ENDDO.
IF NOT ra_id_rech IS INITIAL.
SORT ra_id_rech BY low.
DELETE ADJACENT DUPLICATES FROM ra_id_rech
COMPARING low.
IF NOT pa_prodr IS INITIAL.
UPDATE yyeft1200
SET status = kc_status00
WHERE id_rech IN ra_id_rech.
IF sy-subrc EQ 0.
MESSAGE s900(zbcc)
WITH 'Status change successful'(m08)
space
space
space.
ELSE.
MESSAGE i900(zbcc)
WITH 'Status change failed'(m09)
space
space
space.
ENDIF. "IF sy-subrc EQ 0.
ELSE.
MESSAGE i900(zbcc)
WITH 'TEST RUN: NO databases will be changed'(m03)
space
space
space.
ENDIF. "IF NOT pa_prodr IS INITIAL.
ELSE.
MESSAGE i900(zbcc)
WITH 'Atleast one line should be selected'(m01)
'in order to update.'(m02)
space
space.
ENDIF. "IF NOT ra_id_rech IS INITIAL
WHEN kc_ucomm-back
OR kc_ucomm-exit
OR kc_ucomm-cancel.
LEAVE TO SCREEN 0.
WHEN OTHERS.
ENDCASE. "CASE sy-ucomm
ENDFORM. " handle_user_command
*& Form display_selected_data
Display Selected Data
FORM display_selected_data.
LOOP AT it_output
INTO wa_output
WHERE chk_box EQ kc_x.
MOVE-CORRESPONDING wa_output TO wa_output1.
APPEND wa_output1 TO it_output1.
ENDLOOP. "LOOP AT it_output
call dialog screen and display new alv control
IF NOT it_output1[] IS INITIAL.
CALL SCREEN 101 STARTING AT 10 5.
ENDIF. "IF NOT it_output1[] IS INITIAL
ENDFORM. " change_status
iNCLUDE YYEF_CHECK_ISP_I01
*& Include YYEF_CHECK_ISP_I01 *
*& Module USER_COMMAND_0100 INPUT
Handle user command for screen 0100
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
WHEN kc_ucomm-back.
LEAVE TO SCREEN 0.
WHEN kc_ucomm-exit.
LEAVE TO SCREEN 0.
ENDCASE. "CASE sy-ucomm.
ENDMODULE. "USER_COMMAND_0100 INPUT
*& Module USER_COMMAND_0101 INPUT
Handle User Command for screen 0101
MODULE user_command_0101 INPUT.
CASE sy-ucomm.
WHEN kc_ucomm-back.
LEAVE TO SCREEN 0.
ENDCASE. "CASE sy-ucomm
ENDMODULE. " USER_COMMAND_0101 INPUT
Include YYEF_CHECK_ISP_O01
*& Include YYEF_CHECK_ISP_O01 *
*& Module PBO OUTPUT
OO ALV Display
MODULE pbo OUTPUT.
CREATE OBJECT z_container
EXPORTING container_name = kc_container.
Create TOP-Document
CREATE OBJECT z_dyndoc_id
EXPORTING style = kc_alv.
Create Splitter for custom_container
CREATE OBJECT z_splitter
EXPORTING parent = z_container
rows = 2
columns = 1.
For TOP-OF-PAGE
CALL METHOD z_splitter->get_container
EXPORTING
row = 1
column = 1
RECEIVING
container = z_parent_top.
For ALV Display
CALL METHOD z_splitter->get_container
EXPORTING
row = 2
column = 1
RECEIVING
container = z_parent_grid.
Set height for g_parent_html
CALL METHOD z_splitter->set_row_height
EXPORTING
id = 1
height = 20.
CREATE OBJECT z_grid
EXPORTING i_parent = z_parent_grid.
Set Handler for TOP-OF-PAGE
CREATE OBJECT z_handler.
SET HANDLER z_handler->top_of_page FOR z_grid.
z_repid = sy-repid.
z_variant-report = z_repid.
Display ALV
zs_layout-stylefname = kc_style.
CALL METHOD z_grid->set_table_for_first_display
EXPORTING
is_layout = zs_layout
i_save = kc_u
is_variant = z_variant
CHANGING
it_outtab = it_output[]
it_fieldcatalog = it_fieldcat.
Processing TOP-OF-PAGE Event
CALL METHOD z_grid->list_processing_events
EXPORTING
i_event_name = kc_top
i_dyndoc_id = z_dyndoc_id.
Set handler for ALV Tool Bar
SET HANDLER z_handler->handle_toolbar FOR z_grid.
SET HANDLER z_handler->handle_user_command FOR z_grid.
CALL METHOD z_grid->set_toolbar_interactive.
ENDMODULE. " PBO OUTPUT
*& Module STATUS_0100 OUTPUT
Set the GUI status
MODULE status_0100 OUTPUT.
SET PF-STATUS kc_status.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module STATUS_0101 OUTPUT
Display selected records on screen 0101
MODULE status_0101 OUTPUT.
SET TITLEBAR kc_title.
CREATE OBJECT z_container1
EXPORTING container_name = kc_container1.
CREATE OBJECT z_grid1
EXPORTING i_parent = z_container1.
PERFORM prepare_field_catalog
CHANGING it_fieldcat1.
Display ALV
CALL METHOD z_grid1->set_table_for_first_display
EXPORTING
is_layout = zs_layout
CHANGING
it_outtab = it_output1[]
it_fieldcatalog = it_fieldcat1.
ENDMODULE. " STATUS_0101 OUTPUT
INCLUDE YYEF_CHECK_ISP_TOP
*& Include YYEF_CHECK_ISP_TOP *
DATA DEFINITIONS **
Class declarations *
*class zcl_xyz definition deferred.
CLASS :cl_gui_alv_grid DEFINITION LOAD,
cl_gui_custom_container DEFINITION LOAD.
Tables (old SAP style, please avoid and use workareas instead) *
TABLES: yyeft1200,
yyeft1201.
*tables: xyz.
Controls *
*controls: ctrl_xyz.
Types *
TYPES: BEGIN OF ty_output,
chk_box(1) TYPE c,
celltab TYPE lvc_t_styl,
id_rech TYPE yyeft1200-id_rech,
bprefnr TYPE yyeft1201-bprefnr,
lfdat TYPE yyeft1201-lfdat,
artnr_bp TYPE yyeft1201-artnr_bp,
fnumkred TYPE yyeft1200-fnumkred,
status TYPE yyeft1200-status,
erdat TYPE yyeft1200-erdat,
com_delfnd TYPE char25,
id_anlief TYPE yyeft1008-id_anlief,
bukrs TYPE yyeft1200-bukrs,
belnr TYPE yyeft1200-belnr,
gjahr TYPE yyeft1200-gjahr,
END OF ty_output.
TYPES: BEGIN OF ty_output1,
celltab TYPE lvc_t_styl,
id_rech TYPE yyeft1200-id_rech,
bprefnr TYPE yyeft1201-bprefnr,
lfdat TYPE yyeft1201-lfdat,
artnr_bp TYPE yyeft1201-artnr_bp,
fnumkred TYPE yyeft1200-fnumkred,
status TYPE yyeft1200-status,
erdat TYPE yyeft1200-erdat,
com_delfnd TYPE char25,
id_anlief TYPE yyeft1008-id_anlief,
bukrs TYPE yyeft1200-bukrs,
belnr TYPE yyeft1200-belnr,
gjahr TYPE yyeft1200-gjahr,
END OF ty_output1.
TYPES: BEGIN OF ty_status,
id_rech TYPE yyeft1200-id_rech,
END OF ty_status.
*TYPES-POOLS: xyz.
*TYPES: ty_xyz.
Internal tables *
*DATA: it_xyz.
DATA: it_yyeft1200 TYPE STANDARD TABLE OF yyeft1200,
it_yyeft1201 TYPE SORTED TABLE OF yyeft1201
WITH UNIQUE KEY id_rech posnr,
it_yyeft1008 TYPE STANDARD TABLE OF yyeft1008,
it_output TYPE STANDARD TABLE OF ty_output,
it_output1 TYPE STANDARD TABLE OF ty_output1,
it_fieldcat TYPE lvc_t_fcat,
it_fieldcat1 TYPE lvc_t_fcat.
Workareas *
*DATA: wa_xyz.
DATA: wa_yyeft1200 TYPE yyeft1200,
wa_yyeft1201 TYPE yyeft1201,
wa_yyeft1008 TYPE yyeft1008,
wa_output TYPE ty_output,
wa_output1 TYPE ty_output1.
*****OO ALV DATA DECLARATION
DATA: zs_style TYPE lvc_s_styl,
zs_layout TYPE lvc_s_layo,
z_container TYPE REF TO cl_gui_custom_container,
z_container1 TYPE REF TO cl_gui_custom_container,
z_grid TYPE REF TO cl_gui_alv_grid,
z_grid1 TYPE REF TO cl_gui_alv_grid,
z_dyndoc_id TYPE REF TO cl_dd_document,
z_splitter TYPE REF TO cl_gui_splitter_container,
z_parent_grid TYPE REF TO cl_gui_container,
z_parent_top TYPE REF TO cl_gui_container.
Constants *
*constants: kc_xyz value ... "character
*constants: kn_xyz value ... "numeric
*constants: ki_xyz value ... "integer
*constants: kp_xyz value ... "packed
*constants: kx_xyz value ... "hex
CONSTANTS: kc_status00 TYPE yyeft1200-status VALUE '00',
kc_status10 TYPE yyeft1200-status VALUE '10',
kc_x TYPE char01 VALUE 'X',
kc_include TYPE char01 VALUE 'I',
kc_equal(2) TYPE c VALUE 'EQ',
kc_status(11) TYPE c VALUE 'ZGUI_STATUS',
kc_container TYPE char10 VALUE 'ZCONTAINER',
kc_container1 TYPE char11 VALUE 'ZCONTAINER1',
kc_u TYPE char01 VALUE 'U',
kc_top TYPE char30 VALUE 'TOP_OF_PAGE',
kc_alv TYPE char50 VALUE 'ALV_GRID',
kc_style TYPE char07 VALUE 'CELLTAB',
kc_title TYPE char07 VALUE 'ZTITLE'.
CONSTANTS: BEGIN OF kc_ucomm,
upd TYPE sy-ucomm VALUE 'UPD',
back TYPE sy-ucomm VALUE 'BACK',
exit TYPE sy-ucomm VALUE 'EXIT',
cancel TYPE sy-ucomm VALUE 'CANCEL',
END OF kc_ucomm.
Sentence counters *
*data: cnt_xyz type i value 0.
Calculation variables (Rechenfelder) *
*data: r_xyz.
Switches *
*data: sw_xyz(1) type n value 0.
Misc variables *
*DATA: z_xyz.
*** Initialization of parameters at call of/return to
*** selection dynpro (for Online-only-reports)
DATA: zn_init_seldynp(1) TYPE n
VALUE 1. -
There is some problem with my code. It is actually for simply playing a wav file.
It gives errors on two lines....
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import javax.swing.*;
public class MediaPlayerDemo extends JFrame
AudioClip clip; //Error Here
public MediaPlayerDemo(String title)
super(title);
clip = getAudioClip(getCodeBase(),"access.wav"); //Error Here
clip.loop();
public static void main(String args[])
MediaPlayerDemo m = new MediaPlayerDemo("Title");
m.setSize(400,400);
m.setVisible(true);
}"Audio Clip problem plz help"
You have to learn to help yourself.
Have you done anything to try to fix the errors yourself?
AudioClip clip; //Error Here
the error generated here is self-explanatory.
if you can't fix this, you should get a good book on java basics and start again.
the other error is also easy to fix.
Maybe you are looking for
-
Having trouble moving mail messages from one user to another
I am trying to move mail messages from one user to another on my Macbook, and I cannot seem to do it. I've tried archive, but I don't think I'm doing it right. Any suggestions? Thanks, Noreen Message was edited by: reensjp
-
Office web apps 2013 March update 2013....pdf preview
the web application is configured as permissive. I did the following Remove-OfficeWebAppsMachine updated with the march 2013. restarted the office web apps 2013 server. New-OfficeWebAppsFarm -InternalUrl "https://owa.domain.com" -ExternalUrl "https:/
-
Syncing photos from mac only syncs folders
Hi, Im having some issues with my iPhone 6 plus 128 GB and MacBook Pro 15" In total i have around 24.000 pictures on my MacBook Pro 15" that i would like to synchronize to my iPhone. The issue being that when i sync the photos only the folders are sy
-
Songs by artist are seperated in ipod
I have an ipod nano and I am having the hardest time trying to make it so that the songs by each artist are consolidated in one list. What I mean is, when I search by artist, 'Johnny Cash', for example, is listed 3 times, with all of the songs I have
-
I'm geting an unknown error message 13010 when I restored my iPod Classic (160 GB) 2.0.4 Mac to my OS X version 10.9.5 Mac computer. It cannot by synced. Help!!