Plz help in RAC installation

Hi All,
Im Installing Oracle clusterware 10.2.0.1 on Solaris 10..i want to configure two node RAC. but while installing Clusterware software it gets hanged during product Specific Prerequsite checks.
the problem is im not getting what can b d reason behind dis.Can anyone please help me in dis.
Please help.
Thanks in advance.

Hi user583980
In addition please find herewith the oracle documentation you must read before doing the installation:
http://download.oracle.com/docs/cd/B19306_01/install.102/b14205/toc.htm
read particulary the chapter 2 http://download.oracle.com/docs/cd/B19306_01/install.102/b14205/presolar.htm#sthref135
Did you set up SSH between the Nodes?
Did you run runcluvfy.sh for post hardware stage and pre crs inst stage?
Oracle UID and GID are the same on two nodes.?

Similar Messages

PLZ help starting RAC Linux 10gR2 2 nodes cluster on ASM

The system was not reboot graciously; it was shutdown as a single instance; Then the servers were shutdown.
We can't restart it this morning.
I tried to enable the crs; then in CRS_HOME/bin/ ./crsctl start crs
It did not start the cluster
When I checked ./crs_stat -t
CRS-0184: Cannot communicate with the CRS daemon.
./crsctl check crs -it
Failure 1 contacting CSS daemon
Cannot communicate with CRS
Cannot communicate with EVM
Terry

Gangy,
The log does not give me enough information. The importance is to be able to start the cluster and the whole system. At the bottom, you can see a copy of the log.
Thank you so much.. Terry
h_master:13: I AM THE NEW OCR MASTER at incar 2. Node Number = 1
OCRRAW][1220598112]proprioo: for disk 0 (/dev/raw/raw1), id match (1), my id set (1669906634,945530461) total id sets (1), 1st set (1669906634,945530461), 2nd set (0,0) my votes (1), total votes (2)
OCRRAW][1220598112]proprioo: for disk 1 (/dev/raw/raw3), id match (1), my id set (1669906634,945530461) total id sets (1), 1st set (1669906634,945530461), 2nd set (0,0) my votes (1), total votes (2)
CRSD][1094719840]0Returned from grpstat with event 1
CRSD][1094719840]0Doing grpstat on crs_version group
CRSD][1094719840]0Returned from grpstat with event 1
CRSD][1094719840]0Doing grpstat on crs_version group
CRSD][1094719840]0Returned from grpstat with event 1
CRSD][1094719840]0Doing grpstat on crs_version group
OCRSRV][1231087968]th_select_handler: Failed to retrieve procctx from ht. constr = [14030880] retval lht [-27] Signal CV.
CRSEVT][1545783648]0Processing member leave for orcl2, incarnation: 3
CRSEVT][1545783648]0Do failover for: orcl2
CRSRES][1556273504]0startRunnable: setting CLI values
CRSRES][1556273504]0Attempting to start `ora.orcl2.vip` on member `orcl1`
CRSRES][1556273504]0Start of `ora.orcl2.vip` on member `orcl1` succeeded.
CRSRES][1566763360]0startRunnable: setting CLI values
CRSRES][1566763360]0Attempting to start `ora.orcl.db` on member `orcl1`
CRSRES][1566763360]0Start of `ora.orcl.db` on member `orcl1` succeeded.
CRSEVT][1545783648]0Post recovery done evmd event for: orcl2
CRSEVT][1545783648]0Processing RecoveryDone
OCRSRV][1231087968]th_select_handler: Failed to retrieve procctx from ht. constr = [14030880] retval lht [-27] Signal CV.
OCRSRV][1231087968]th_select_handler: Failed to retrieve procctx from ht. constr = [-1741332160] retval lht [-27] Signal CV.
OCRSRV][1231087968]th_select_handler: Failed to retrieve procctx from ht. constr = [-1741452176] retval lht [-27] Signal CV.
OCRSRV][1231087968]th_select_handler: Failed to retrieve procctx from ht. constr = [-1741332160] retval lht [-27] Signal CV.

Very URGENT:am not able to log in to my account on installation of OSX lion...tried to resolve this issue by calling apple support centre ,but was left in vain...am not able to access my documents nor do any work...plz help me resolve this issue asap...

am not able to log in to my user account after installation of OSXLion,have called up the support centre many times,but was left in vain ...i belief its a simple problem ,but why is apple support center not able to help me out ...have given them all the required information with respect to everything...somebody plz help me to log in as am not able to access my docs and do any work...

My phone works all fine when am in mumbai but as soon s i leave mumbai I am not able to make an otgoing call
This is entirely a carrier issue. If your carrier (airtel) doesn't provide service outside of Mumbia, this has nothing to do with your iPhone.
i feel i need to change my brand
This is a user-to-user tech support forum, not Apple. No one here cares at all about your threats.
NEVER post personal info in this public forum

Plz help Photoshop CS4 trial installation error

Yesterday i downloaded Adobe Photoshop CS4 Trial from adobe's official website. it took about 2 hours on 1MBPS DSL. it was 814 mb 7z file and anoth extractor when i tried to extract the 7z file with adobe extractor it went fine but at 100% an error occured (see the screen shot). Now when i go to folder where the setup files has been extracted and open the setup file. nothing happens no file is opened even after many retries. plz help me.
Screenshot:
Also i have checked the space on drive it is 9 GB

The screen shot showed your C: drive as 10GB!
I don't think that PC is able to run CS4
From the product page:
System requirements
Windows
    * 1.8GHz or faster processor
    * Microsoft® Windows® XP with Service Pack 2 (Service Pack 3 recommended) or Windows Vista® Home Premium, Business, Ultimate, or Enterprise with Service Pack 1 (certified for 32-bit Windows XP and 32-bit and 64-bit Windows Vista)
    * 512MB of RAM (1GB recommended)
    * 1GB of available hard-disk space for installation; additional free space required during installation (cannot install on flash-based storage devices)
    * 1,024x768 display (1,280x800 recommended) with 16-bit video card
    * Some GPU-accelerated features require graphics support for Shader Model 3.0 and OpenGL 2.0
    * DVD-ROM drive
    * QuickTime 7.2 software required for multimedia features
    * Broadband Internet connection required for online services

Plz Help, i downloaded ios8 on my 5s and it went to recovery mode after clicking installation.then downloaded by itunes and loaded but cant find my apple ID as i forgot everything. the phone is useless and cant be activated. wot can i do????plz help

Plz Help,
the last night i downloaded ios8 on my 5s and it went to recovery mode after clicking installation.
then downloaded the ios8 using itunes and loaded but cant find my apple ID as i forgot everything.
the phone is useless and cant be activated. wot can i do????plz help

Apple has a number of ways to help you find your Apple ID and password:
https://iforgot.apple.com/appleid
If you forgot your Apple ID password
Apple ID: Contacting Apple for help with Apple ID account security

JSDK2.0 installation ...Plz help

I am new to Java programming. My OS is Windows ME.I am using JDK1.3(in c:\jdk1.3\) and in order to run the SERVLETS I recently installed the JSDK2.0(in c:\jsdk2.0).I updated the class path to c:\jsdk2.0\bin and c:\jsdk2.0\lib\jsdk.jar .Now I wrote a simple servlet program SimpleServlet.java and saved it in c:\MyPrograms.
Now when I compiled this program at prompt as follows
C:\MyPrograms\>javac SimpleServlet.java
 I am getting the following errors
1)Package javax.servlet doesn�t exist
2)Package jaavx.servlet.http doesn�t exist
Can somebody please tell me where I went wrong. My guess is that the problem is with installing JSDK. Somebody please let me out this problem.
Thanx!

I think I have installed everything properly...as I am getting nowhere lets start a fresh...
jdk installation-:c:\jdk1.3
jsdk installin-:c:\jsdk2.0
class path set -:set path=c:c:\jsdk2.0\bin;c:\jsdk2.0\lib\jsdk.jar;
Now let us take an example HelloWorld.java...I saved this in c:\Myjava folder
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class HelloWorld extends HttpServlet{
 public void doGet(HttpServletRequest req,HttpServletResponse res) throws
 ServletException, IOException{
 res.setContentType("text/html");
 PrinterWriter out=res.getWriter();
 out.println("<HTML>");
 out.println("<HEAD><TITLE>Hello World</TITLE></HEAD>");
 out.println("<BODY>");
 out.println("<BIG>Hello World</BIG>");
 out.println("</BODY></HTML>");
}Now i compile the program as follows
c:/Myjava> javac Helloworld.java
Now I get the errors ...I think the installation is correct...But I cant find the problem...I am getting desparate...Plz Help me out...
Thnx

Hello want help on rac

hello ,
i want help on
Step-By-Step Installation of RAC on Windows NT/2000
plz help me .
Pankaj

It would be interesting to go through with
Step-By-Step Installation of RAC with RAW Datafiles on Windows 2000
 hare krishna Alok

My ipod touch 5th generation wont download apps and let m e use them!!! Plz Help me fast!

I have an i pod touch 5 and I try to download a new app from the app store so i goto the app store and click download then click it again to install it and it installs but it dont leave an app icon on the home page so i go back to the app store and it says open in a ble box so i click open and it dont open it just keeps saying open and it wont open! please help me!!!!!!!!!!!

I ment blue not ble sorry but plz help!

My recirculating pump in sub vi simulation link doesnt work in the second iteration .It opens for maybe half a second whereas i gave the time delay for 5 secs..plz help very urgent

Hi,
I have attached my simulation loop.In the model attached i hav eone main pump with constant rpm which drives the 5 smaller pumps and fills the tank at the same time.As soon as the tanks reach their 90% level,the valves of the five pumps close(SP1,SP2,SP3,Sp4,Sp5).After that the recirculating pumps opens for 5 secs of the first tank.As soon as the recirculation finishes,the drain valve(SV1) for tank 1 open and the volume goes to interim storage.This happens for all the remaining tanks.
My simulation works the first time,but when the second time the loop starts,it skips the recirculation pump even though i gave a time delay for 5 secs.Plz help ..I have attached the simulation.
Thanks,
Rami
Attachments:
Spatial Logic_2_Final.vi ‏223 KB

Rami,
I suspect that you have a race condition. The widespread use of local variables frequently leads to race conditions. Your subVI (Spatial Logic Sub_2.vi was not included) so I cannot run the VI. You have no way of knowing whether the subVI or the inner case structure will execute first, because there is no data dependency between them.
I think a shift register or a few and some dataflow thinking would allow you to eliminate the inner case structure, the local variables, and, probably, most of your problems.
Some of the SPi are indicators and some are controls. How are they used?
The last case of the inner loop retursn to Case 1. Would case 0 be better?
As for the second time through issue, it may be related to the Elapsed time function Auto Reset. From the help file: "Resets the start time to the value in Present (s) when the Express VI reaches the Time Target (s)." If more than 5 seconds elapses between the first time you use this and the next, it will exit immediately on the subsequent calls.
Lynn

10g RAC installation fails....

Hello All,
I am new to RAC installation.while doing the installation in 2node cluster,till the configuration assisstants windows everything went fine. in CA while checking the status,the oracle clusterware config assistant failed with the following log....
INFO: Starting Install on nodes 'server004'
INFO: Saving Cluster Inventory
INFO: Running command 'C:\DOCUME~1\uit0076\LOCALS~1\Temp\1\OraInstall2010-05-18_11-41-42AM\oui\bin\setup.exe -jreLoc C:\DOCUME~1\uit0076\LOCALS~1\Temp\1\OraInstall2010-05-18_11-41-42AM\jre\1.4.2 -paramFile C:\DOCUME~1\uit0076\LOCALS~1\Temp\1\OraInstall2010-05-18_11-41-42AM\oui/clusterparam.ini -silent -ignoreSysPrereqs -attachHome -noClusterEnabled ORACLE_HOME=C:\oracle\product\10.2.0\crs ORACLE_HOME_NAME=OraCr10g_home CLUSTER_NODES=server003,server004 CRS=true "INVENTORY_LOCATION=C:\Program Files\Oracle\Inventory" LOCAL_NODE=server004 -remoteInvocation -invokingNodeName server003 -logFilePath "C:\Program Files\Oracle\Inventory/logs" -timestamp 2010-05-18_11-41-42AM' on the nodes 'server004'.
INFO: Deleting service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: Creating service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: Starting service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: Stopping service OracleOUIOraCr10g_homeService on nodes server004.
INFO: Deleting service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: RUN_RECOMMENDED_TOOLS FIRST is set to false
INFO: No of Recommended Tools5
INFO: plugin-list is created
INFO: pluginlist is updated for: Oracle Clusterware current size: 1
INFO: No of ExitOnly Tools in this session: 0
INFO: cf session for perform has hashcode: 1040982
INFO: detached tool list getting prepared fo comp: Oracle Clusterware
INFO: cfsession hashcode for exit only tools: 1040982
INFO: hashcode for action: 17596838
INFO: No of ExitOnly Tools: 0
INFO: saving exit only tools ...
INFO: no detached only tools in this session
INFO: exit-only tools are created in single installation
INFO: no. of sets of tools to be run: 1
INFO: ca page to be shown: true
INFO: exitonly tools to be excuted passed: 0
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat
Step 1: checking status of CRS cluster
Step 2: creating directories (C:\oracle\product\10.2.0\crs)
Step 3: configuring OCR repository
ocr upgrade failed with (-1073741819)
Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat has failed
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
Have 1GB RAM in both the nodes.
could any one help me to solve this?
Thanks,
Derick
Edited by: user4487322 on May 18, 2010 1:46 AM

Thank you madrid.I am installing the RAC in windows2003 sp2 server.in the link till the step no#12(12. The Configuration Assistants page appears.)everything went
fine.while checking the 'Virtual Private IP Configuration Assistant',the installation fails with following error.....
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" succeeded
INFO: Command = C:\oracle\product\10.2.0\crs/bin/racgons.exe add_config server003:6200 server004:6200
INFO: Configuration assistant "Oracle Notification Server Configuration Assistant" succeeded
INFO: Command = C:\oracle\product\10.2.0\crs/bin/oifcfg.exe setif -global "Local Area Connection"/10.28.25.0:public "Local Area Connection 2"/10.10.10.0:cluster_interconnect
INFO: Configuration assistant "Oracle Private Interconnect Configuration Assistant" succeeded
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "server003,server004" -nodevips "server003/vipserver003/255.255.255.0/Local Area Connection,server004/vipserver004/255.255.255.0/Local Area Connection"
Execution of the plugin was aborted
INFO: Configuration assistant "Virtual Private IP Configuration Assistant" was canceled.
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "server003,server004" -nodevips "server003/vipserver003/255.255.255.0/Local Area Connection,server004/vipserver004/255.255.255.0/Local Area Connection"
Execution of the plugin was aborted
INFO: Configuration assistant "Virtual Private IP Configuration Assistant" was canceled.
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "server003,server004" -nodevips "server003/vipserver003/255.255.255.0/Local Area Connection,server004/vipserver004/255.255.255.0/Local Area Connection"
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
I am able tp ping all my IP's from both the nodes,with host name &alias specified in the host file.
any thing else to be checked to fix "Virtual Private IP Configuration Assistant"?Any help?

500 internal server error..plz help

hi,
since i started working on oracle apps...this forum has proved itself alt helpful...
i have performed a single node installation successfully over my laptop on win xp sp2 os.
alt of error generated bt in da end i always found a solution here...
guys like hsawwan are a great asset for this forum.....
may GOD reward u guys fr da job u r doing by helping others....
my recent problem has left me in a fix....
problem:
after a successful installation my system was working very fine ... i used the application and every thng seemed to work ok...
bt thren i restarted my pc nd this chaos started ....
first m receiving
500 internal server error...
thn a blank screen
now again 500 internal server error...
steps i performed
1-restarted db listener
2-Disabled Distributed JVM Cache by changing "LONG_RUNNING_JVM=" from "true" to "false" in the oc4j.properties.
reference =metalink Doc ID: 761869.1
plz help me get rid of this error.....
m nt an xpert .m a newbie.. so if u xplain in plain simple word i'l b grateful....
thanx thanx thanx in advance ....

HI
Sorry for late response ...
actually i performed the installation of 12R ON MY LAPTOP...
SORRY for posting it in 11I INSTALLATION issues...
my problem was solved by this action plan...
i am writing it here for some future reference ...
open a new shell and set your apps environment
then goto following directory -------->>> cd $ADMIN_SCRIPTS_HOME
stop this service ---->>> adopmnctl.sh stop
make a check if it is really down--------->>> ps -ef | grep <USER> grep opm (optional)
delete the following:
rm -fr $INST_TOP/ora/10.1.3/j2ee/oacore/persistence/* (optional but it would be better if u perform it)
rm -fr $INST_TOP/ora/10.1.3/j2ee/oafm/persistence/*
rm -fr $INST_TOP/ora/10.1.3/j2ee/forms/persistence/*
again start the services ------>>> adopmnctl.sh start
restart your machine ....
this solution worked for my pc ...
note ** solution may differ for different users ....
thanks a lot helios and hsawwan for ur support .... :)

Hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!

hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!
iv unistalled flash, iv checked plug ins it just wont work,

It would have been a great help to know precisely what Mac you have, so some of the following may not apply:
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
(If you are running Mavericks: After years of fighting malware and exploits facilitated through Adobe's Flash Player, the company is taking advantage of Apple's new App Sandbox feature to restrict malicious code from running outside of Safari in OS X Mavericks.)
* Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser.
You can also try these illustrated instructions from C F McBlob to perform a full "clean install", which will resolve the "Blocked Plug-in" message when trying to update via the GUI updater from Adobe.
Use the FULL installer for 12.0.0.44: Flash Player 12 (Mac OS X)
And the instructons are here: Snow Leopard Clean Install.pdf
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, try the following solution which fools the site into thinking that you are running the version 11.5.502.55:)
Download this http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

Plz help for upgrading to new OS X Mavericks

I purchased MacBook Pro in May'11 with Mac OS 10.6.6 installed. Few months back i downloaded DMG file elsewhere for upgrading to10.6.8 and successfully upgraded without loosing any file & other OS i.e. WINDOWS XP. Now i wish to upgrade to new OS X 10.9.2. Plz help me for doing so.

Thanx for replying, but there is no Apple Store in INDIA, there are only resellers. I approached the outlet from where i had purchased my MacBook, but he has refused for update.
Plz tell me if i can get STANDALONE INSTALLER from "apple.com
". I searched for one which updated directly from 10.6.8 (my present OS) to 10.9.2 at "http://support.apple.com/kb/HT1338?viewlocale=en_US", but in vain.
Please let me link from where i can download installer in a PC working on WINDOWS 7 with gud internet speed.
Regards,
Alok

Plz help me,i did everything and nothing has worked,im going insane!!!

Hello people,for months ive tried fixing my i-pod and nothing has worked....i try to restore my ipod maybe that would fix da problem but when i press the program,it says ipod service error,and before that it worked ok,it said preparing and stuff but it never stoped perapring the ipod it just got stuck,and in my itunes i see my ipod,but i cant put no music in it?Therefore i have the 2 colour lights all the time when i try to play it.and also when i try to update my ipod with the program u download from the net it says in the end of the installation:Service could not be deleted.All these problems,could someone plz help me,im turning insane!And i cant refund my ipod because i lost my recite and also the store isnt anymore there(My luck)but plz somebody answer me,thank u

I believe the green and orange light flashing means that you have no music on your iPod Shuffle (which seems correct as you have performed a restore). That is the way the iPod Shuffle tells you that it is looking for the next song. When the iPod Shuffle is plugged into your computer (XP user myself) the orange light is suppose to flash on and off (both the battery light if charging and the front light). When updating the iPod using the updater, I received the same error you received (iPod service error), but I believe it was because I was trying to update my iPod with the Sept 05 version when the iPod already had the Jan 06 update on it. I also noticed the "preparing" bug that you mentioned, by simply selecting next, the restore continues correctly. Once I restored my iPod to the factory settings AND performed the restore process THREE times using the Sept 05 updater (what came with my iPod Shuffle) I was able to store music AND listen to it once disconnected from my computer. My next task is to update the iPod with the Jan 06 update and try the process again but I believe there is a driver issue with this version and it may not work. If this is the case, I will just stick with the software received with the iPod. For you, I would attempt to reinstall the software from the CD that was provided with you iPod Shuffle, restore your iPod Shuffle to the factory settings and do this restore THREE times, start iTunes, once the iPod Shuffle shows up in the Source listing right click on it and select Update. Make sure songs copy over (the top centre of iTunes will tell you the status of the update) and finally disconnect and try playing music.

Plz help me out manjit

hello seniors,
while installing ides 4.7 c their is a problem occured
it is showing tns protocol error plz help me sort thgis problem

Hi Manjit,
Your listener is not running so the error.
Oracle tns listener runs as a service.
At windows level go to START->RUN->SERVICES.MSC
You can see the status os oracle tnslistener if not started start it and run the installation.
Regards
Ashok

Plz help in RAC installation

Similar Messages

Maybe you are looking for