Plz help me .... A question about JOPI

Dear all,
I had to do an assignment on JOPI Java object-passing Interface
I saw by chance one of the member using it
JOPI mp = new JOPI(args)
I searched all over the net to see if there any such class implementation to JOPI or any package, but I couldn't find.
I am sorry I am not too professional and i need your help.
Is there any package for this JOPI and how can I compile or run it in JAVA.
Thanx all

I'm not at all familiar with JOPI, and couldn't easily find anything about it online. However, passing arguments to a constructor is fairly common, if that's what your question is about.
If you have access to the JavaDocs for JOPI, just look up the constructor information, and that should provide a hint about what sort of arguments JOPI will accept.
Joe

Similar Messages

PlZ help me these question

Hi all,
i attended a interview, these are the qes..plz help me with ans..
1. is it possible without using function modules in
bdc(open, insert,close) data transferring? how ...
2. which one is better session/call transection? why?
3. in LSMW what r the methods u r using?
4. in LSMW otherthan recording any method is there? what are they?
5. in LSMW where are u doing field validation? in which step, can u explain?
6. is it possible to run smartform without using
" ssf_function_module_name", how ?
7. how will display secondary list in ALV.
8. how will u call back to secondary lists to base list?
9. how u r printing secondary list in interactive reports?
10. what are the events used in u r ALV reports?
11. how will u access data in secondary list?
12. what is diff b/w bapi created fm and standered bapi fm?
13. in ALE in which programm worked either standalone or any other?
here what is standalone?i know change pointer..

Hi
10. what are the events used in u r ALV reports?
Events in alv and their FM    The main events in alv and their FM and why we use these:
1. SLIS_PRINT_ALV.
2. SLIS_T_LISTHEADER.
3. SLIS_T_EVENT.
4. SLIS_T_SORTINFO_ALV.
5. SLIS_T_LAYOUT_ALV.
6. SLIS_T_FIELDCAT_ALV.
and in classic reports what is the sequence of events:   === Events are
At selection-screen output.
Initialization.
At selection-screen on field
At selection-screen on end of field
At selection-screen on Radiobutton Group R1. (If you have any radio buttons)
At selection-screen on block b1. (If you have any blocks)
Start-of-selection.
Get node. (if the data is retreived from a logical database)
Get node late. (if the data is retreived from a logical database)
Top-of-page. (if the write statement is in the end-of-selection event or we can say that before the first write statement)
end-of-selection.
and fuction modules are
LISTHEADER - Is used to print the header information in the ALV List. Name, Date, Time, ALV Name and other details are called as Header information.   EVENT - Basically this is the FM to handle Event's. When the user needs to do some event operation like when double clicking the a particular field we need to perform some operation.   These events are captured by this FM.   LAYOUT - This FM is used to define the layout of the List. There are many options available in this FM to define the Layout style.   FIELDCAT - These are used to populate the List header. We can change them according to our req.
User-defined Text Output Event
    Application
      print_end_of_list
    Define output text to be printed at the end of the entire list
      print_top_of_list
    Define output text to be printed at the beginning of the entire list
      print_end_of_page
    Define output text to be printed at the end of each page
      print_top_of_page
    Define output text to be printed at the beginning of each page
      subtotal_text
    Define self-defined subtotals texts
Mouse-controlled Actions in the Grid Control Event
    Application
      button_click
    Query a click on a pushbutton in the ALV Grid Control
      double_click
    Query a double-click on a cell of the ALV Grid control
      hotspot_click
    Query a hotspot click on columns defined for this purpose in advance
      onDrag
    Collect information when elements of the ALV Grid Control are dragged
      onDrop
    Process information when elements of the ALV Grid Control are dropped
      onDropComplete
    Perform final actions after successful Drag&Drop
      onDropGetFlavor
    Distinguish between options for Drag&Drop behavior
Processing of Self-defined and Standard Functions Event
    Application
      before_user_command
    Query self-defined and standard function codes
      user_command
    Query self-defined function codes
      after_user_command
    Query self-defined and standard function codes
Definition of Self-defined Functions Event
    Application
      toolbar
    Change, delete or add GUI elements in the toolbar
      menu_button
    Define menus for menu buttons in the toolbar
      context_menu_request
    Change context menu
      onf1
    Define self-defined F1 help
All of these can be found under type group SLIS.
Events
SLIS_EV_ITEM_DATA_EXPAND        TYPE SLIS_FORMNAME VALUE 'ITEM_DATA_EXPAND',
SLIS_EV_REPREP_SEL_MODIFY       TYPE SLIS_FORMNAME VALUE 'REPREP_SEL_MODIFY', SLIS_EV_CALLER_EXIT_AT_START TYPE SLIS_FORMNAME VALUE 'CALLER_EXIT',
SLIS_EV_USER_COMMAND              TYPE SLIS_FORMNAME VALUE 'USER_COMMAND',
SLIS_EV_TOP_OF_PAGE                     TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
SLIS_EV_DATA_CHANGED                TYPE SLIS_FORMNAME VALUE 'DATA_CHANGED',
SLIS_EV_TOP_OF_COVERPAGE       TYPE SLIS_FORMNAME VALUE 'TOP_OF_COVERPAGE',
SLIS_EV_END_OF_COVERPAGE       TYPE SLIS_FORMNAME VALUE 'END_OF_COVERPAGE',
SLIS_EV_FOREIGN_TOP_OF_PAGE TYPE SLIS_FORMNAME
VALUE 'FOREIGN_TOP_OF_PAGE', SLIS_EV_FOREIGN_END_OF_PAGE TYPE SLIS_FORMNAME
VALUE 'FOREIGN_END_OF_PAGE',
SLIS_EV_PF_STATUS_SET                  TYPE SLIS_FORMNAME VALUE 'PF_STATUS_SET',
SLIS_EV_LIST_MODIFY                      TYPE SLIS_FORMNAME VALUE 'LIST_MODIFY',
SLIS_EV_TOP_OF_LIST                       TYPE SLIS_FORMNAME VALUE 'TOP_OF_LIST',
SLIS_EV_END_OF_PAGE                    TYPE SLIS_FORMNAME VALUE 'END_OF_PAGE',
SLIS_EV_END_OF_LIST                      TYPE SLIS_FORMNAME VALUE 'END_OF_LIST',
SLIS_EV_AFTER_LINE_OUTPUT       TYPE SLIS_FORMNAME VALUE 'AFTER_LINE_OUTPUT', SLIS_EV_BEFORE_LINE_OUTPUT     TYPE SLIS_FORMNAME VALUE 'BEFORE_LINE_OUTPUT',
SLIS_EV_SUBTOTAL_TEXT                TYPE SLIS_FORMNAME VALUE 'SUBTOTAL_TEXT'

Plz help with these questions

Hi
plz help me in step by step process on :
1.     Check who has access to transaction: F110 for company code 313 and 471
2.     Check who has access to transaction SE16
3.     Check who has access to create background jobs
quick reply is highly appreciated..
Rgds
syed

Hi Syed,
I suggest that you ask your Security Administrator to give you this information.
If you do not want to ask your security administrator then you need to look at the user information system via transaction SUIM which will give you this information via various reports.
You may want to start by looking at report Users by Transaction Authorisations and working from there

Please, help a newbie: Question about animating expanding containers

Hi All,
Short Version of my Question:
I'm making a media player that needs to have an animation for panels sliding up and down and left and right, and the method I've been using to do this performs far slower than the speed I believe is possible, and required. What is a fast way to make a high performance animation for such an application?
Details:
So far, to do the animation, I've been using JSplitPanes and changing the position of the divider in a loop and calling paintImmediately or paintDirtyRegion like so:
public void animateDividerLocation( JSplitPane j, int to, int direction) {
for(int i=j.getDividerLocation(); i>=to; i-=JUMP_SIZE) {
j.setDividerLocation(i);
j.validate();
j.paintImmediately(0, 0, j.getWidth(), j.getHeight());
The validate and paintImmediately calls have been necessary to see any changes while the loop is going. I.e., if those calls are left out, the components appear to just skip right to where they were supposed to animate to, without having been animated at all.
The animation requirement is pretty simple. Basically, the application looks like it has 3 panels. One on the right, one on the left, and a toolbar at the bottom. The animation just needs to make the panels expand and contract.
Currenly, the animation only gets about, say, 4 frames a second on the 800 MHz Transmeta Crusoe processor, 114 MB Ram, Windows 2000 machine I must use (to approximate the performance of the processor I'll be using, which will run embedded Linux), even though I've taken most of the visible components out of the JPanels during the animation. I don't think this has to do with RAM reaching capacity, as the harddrive light does not light up often. Even if this were the case, the animation goes also goes slow (about 13 frames a second) on my 3 GHz P4 Windows XP if I keeps some JButtons, images etc., inside the JPanels. I get about 50 frames/sec on my 3 GHz P4, if I take most of the JButtons out, as I do for the 800 MHz processor. This is sufficient to animate the panels 400 pixels across the screen at 20 pixels per jump, but it isn't fast or smooth enough to animate across 400 pixels moving at 4 pixel jumps. I know 50 frames/sec is generally considered fast, but in this case, there is hardly anything changing on the screen (hardly any dirty pixels per new frame) and so I'd expect there to be some way to make the animation go much faster and smoother, since I've seen games and other application do much more much faster and much smoother.
I'm hoping someone can suggest a different, faster way to do the animation I require. Perhaps using the JSplitPane trick is not a good idea in terms of performance. Perhaps there are some tricks I can apply to my JSplitPane trick?
I haven't been using any fancy tricks - no double buffering, volatile images, canvas or other animation speed techniques. I haven't ever used any of those things as I'm fairly new to Swing and the 2D API. Actually I've read somewhere that Swing does double buffering without being told to, if I understood what I read. Is doing double buffering explicitly still required? And, if I do need to use double buffering or canvas or volatile images or anything else, I'm not sure how I would apply those techiniques to my problem, since I'm not animating a static image around the screen, but rather a set of containers (JSplitPanes and JPanels, mostly) and components (mostly JButtons) that often get re-adjusted or expanded as they are being animated. Do I need to get the Graphics object of the top container (would that contain the graphics objects for all the contained components?) and then double buffer, volatile image it, do the animation on a canvas, or something like that? Or what?
Thanks you SO much for any help!
Cortar
Related Issues(?) (Secondary concerns):
Although there are only three main panels, the actual number of GUI components I'm using, during the time of animation, is about 20 JPanels/JSplitPanes and 10 JButtons. Among the JPanels and the JSplitPanes, only a few JPanels are set to visible. I, for one, don't think this higher number of components is what is slowing me down, as I've tried taking out some components on my 3GHz machine and it didn't seem to affect performance much, if any. Am I wrong? Will minimizing components be among the necessary steps towards better performance?
Anyhow, the total number of JContainers that the application creates (mostly JPanels) is perhaps less than 100, and the total number of JComponents created (mostly JButtons and ImageIcons) is less than 200. The application somehow manages to use up 50 MBs RAM. Why? Without looking at the code, can anyone offer a FAQ type of answer to this?

You can comment out the lines that add buttons to the panels to see the behavior with empty panels.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.Timer;
public class DancingPanels
 static GridBagLayout gridbag = new GridBagLayout();
 static Timer timer;
 static int delay = 40;
 static int weightInc = 50;
 static boolean goLeft = false;
 public static void main(String[] args)
 final GridBagConstraints gbc = new GridBagConstraints();
 gbc.weightx = 1.0;
 gbc.weighty = 1.0;
 gbc.fill = gbc.HORIZONTAL;
 final JPanel leftPanel = new JPanel(gridbag);
 leftPanel.setBackground(Color.blue);
 gbc.insets = new Insets(0,30,0,30);
 leftPanel.add(new JButton("1"), gbc);
 leftPanel.add(new JButton("2"), gbc);
 final JPanel rightPanel = new JPanel(gridbag);
 rightPanel.setBackground(Color.yellow);
 gbc.insets = new Insets(30,50,30,50);
 gbc.gridwidth = gbc.REMAINDER;
 rightPanel.add(new JButton("3"), gbc);
 rightPanel.add(new JButton("4"), gbc);
 final JPanel panel = new JPanel(gridbag);
 gbc.fill = gbc.BOTH;
 gbc.insets = new Insets(0,0,0,0);
 gbc.gridwidth = gbc.RELATIVE;
 panel.add(leftPanel, gbc);
 gbc.gridwidth = gbc.REMAINDER;
 panel.add(rightPanel, gbc);
 timer = new Timer(delay, new ActionListener()
 gbc.fill = gbc.BOTH;
 gbc.gridwidth = 1;
 public void actionPerformed(ActionEvent e)
 double[] w = cycleWeights();
 gbc.weightx = w[0];
 gridbag.setConstraints(leftPanel, gbc);
 gbc.weightx = w[1];
 gridbag.setConstraints(rightPanel, gbc);
 panel.revalidate();
 panel.repaint();
 JFrame f = new JFrame("Dancing Panels");
 f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
 f.getContentPane().add(panel);
 f.setSize(400,300);
 f.setLocation(200,200);
 f.setVisible(true);
 timer.start();
 private static double[] cycleWeights()
 if(goLeft)
 weightInc--;
 else
 weightInc++;
 if(weightInc > 100)
 weightInc = 100;
 goLeft = true;
 if(weightInc < 0)
 weightInc = 0;
 goLeft = false;
 double wLeft = weightInc/ 100.0;
 double wRight = (100 - weightInc)/100.0;
 return new double[]{wLeft, wRight};
}

Need help reinstalling Yosemite/Question about external hard drive

I have an early MacBook Pro and I have to reinstall Yosemite because I've been getting nothing but spinning beach balls, slow loading, lag in type showing up, and wi-fi issues. I took the laptop to the Genius Bar at the Apple store last week and they ran diagnostics on everything and all was perfectly OK. No hardware issues, no memory issue and he said my laptop was very clean. He saw the spinning beach ball many times while he was working on my laptop and suggested that I turn off File Vault as that could be causing the slowdown. He said if that didn't work (it didn't) to buy an external hard drive (which I received today) and to back up everything through Time Machine then reinstall Yosemite. I specifically bought an external HD that says "for Mac" and as soon as I connected it Time Machine opened and did the backup.
Now these are my questions. Are all my photos on iPhoto, and my Word for Mac documents backed up so that when I reinstall Yosemite, everything is going to be right where I left it? Will I lose Word for Mac and have to reinstall it? Isn't Word for Mac a one time use/install and will I have trouble and have to call Microsoft to input my authentication key in again and will they let me? I know silly questions but I'm really worried about losing stuff.
Also step-by-step detailed instruction on how to reinstall Yosemite would really be appreciated. Thank you!

YoJoLo wrote:
Are all my photos on iPhoto, and my Word for Mac documents backed up so that when I reinstall Yosemite, everything is going to be right where I left it?
If you have taken the backup using the Time machine then there is nothing to worry as all your photos from iPhotos and Word for mac documents are backup safely by your time machine.
Only keep one thing in mind that the external HDD which you use for the time machine backup should have the capacity size of about 3-4 times that of your backup data size. Or else, the time machine external drive will start deleting the files if the external drive is about to be full.
YoJoLo wrote:
Will I lose Word for Mac and have to reinstall it? Isn't Word for Mac a one time use/install and will I have trouble and have to call Microsoft to input my authentication key in again and will they let me?
You absolutely don’t have to reinstall the Word for mac if its install in the first place because Time machine will backup the system installed files of your MS Word which you had installed.
Word for mac is a one time install and you don’t have to call Microsoft for any authentication key after you have restored your Word backup files from the time machine drive. As I said before the time machine will backup your Word system installed files leaving you no chance to reinstall it again.
YoJoLo wrote:
Also step-by-step detailed instruction on how to reinstall Yosemite would really be appreciated. Thank you!
Here, Yosemite reinstall procedure......
Important: To reinstall OS X, you must be connected to the Internet. Make sure your power adapter is plugged in. Reinstall OS X using the built-in recovery disk.
In the menu bar, choose Apple menu > Restart. Once your Mac restarts (and the gray screen appears), hold down the Command and R keys.
Select Disk Utility, then click Continue.
Select your startup disk on the left, then click the Erase tab.
Choose Mac OS Extended (Journaled) from the Format menu, enter a name, then click Erase.
Important: Erasing the disk removes all the information from the disk. Be sure to back up the information you want to keep to an external device.
After the disk is erased, choose Disk Utility > Quit Disk Utility.
Select Reinstall OS X, click Continue, then follow the onscreen instructions.
Hope this helps.....

Plz help with 2 question's!!

I am trying to fix a nano for a friend, she said that she has updated itunes and it shows her songs and acted as if they all d/l to ipod fine but they do not show up on ipod. I hooked it up to my comp. with my updated itunes, it shows up in itunes and on my computer as a removable disc AND when I go to my comp. and explore that drive, the songs are there and work. In itunes it does show that disc space has been used on the ipod but nothing else shows up. I've tried the good ole restore that I've never gotten to work on any ipod. I tried doing the udater and after waiting 3 hrs.(gotta love dial-up)it said that there was some error and couldn't update. What next? B/U her songs and restore? The second ques. is on my own nano, I've tried to do the updater for it and itunes acts like it is d/l but the progress bar never moves. What's that all about and do I really need the updater? Thanks in advance!!

1. How are you getting the songs onto the iPod? Are you dragging them to the iPod like it is in Enable Disk Mode (dragging songs to it like a HDD), or are you putting them on through iTunes? Is Enable Disk Mode turned on?
Check this out:
My Computer Recognizes iPod as a Different Drive
As for your second question, well, can't answer that one. Sorry!
I hope this helps!

Hi plz help me this question ASAP

without writing start-of-selection-screen we can write end of selection screen and wise versa then what is the use.

The sequence in which the processing blocks occur in the program is irrelevant. The actual processing sequence is determined by the external events. However, to make your programs easier to understand, you should include the event blocks in your program in approximately the same order in which they will be called by the system. Subroutines should be placed at the end of the program.
Statements that are not assigned to a processing block are never executed. An exception to this are any non-declarative statements between the REPORT or PROGRAM statement and the first processing block, which are assigned to the default event
START-OF-SELECTION if a program does not contain an explicit START-OF-SELECTION block, these statements form the entire START-OF-SELECTION block. If a START-OF-SELECTION keyword is already included in your program, these statements are inserted at the beginning of this block. If the program does not contain any explicit event blocks, all non-declarative statements are assigned to the default processing block START-OF-SELECTION.
There can be many scenarios
SCENARIO 1:
REPORT ZTEMP .
FORM ROUTINE.
WRITE / 'Subroutine'.
ENDFORM.
WRITE / 'Statement 1'.
START-OF-SELECTION.
WRITE / 'Statement 2'.
PERFORM ROUTINE.
WRITE / 'Statement 3'.
*END-OF-SELECTION.
This code wont give an error.
SCENARIO 2:
REPORT ZTEMP .
FORM ROUTINE.
WRITE / 'Subroutine'.
ENDFORM.
WRITE / 'Statement 1'.
START-OF-SELECTION.
WRITE / 'Statement 2'.
PERFORM ROUTINE.
WRITE / 'Statement 3'.
END-OF-SELECTION.
This wont give an error either, as both event blocks are present.
SCENARIO 3:
RITE / 'Statement 1'.
FORM ROUTINE.
WRITE / 'Subroutine'.
ENDFORM.
*START-OF-SELECTION.
WRITE / 'Statement 2'.
PERFORM ROUTINE.
WRITE / 'Statement 3'.
END-OF-SELECTION.
This woul dgive an error, as start of selection is not present, and we use end of selection.
Hope this answers your question.
Reward if helpful

Where 2 go for help with some questions about a logo design?

I'm an absolute novice Illustrator user (CS4). Im doing a web site for a mate and he's given me a logo that I have made a vector drawing of. It was black and white, and I made it coloured but I have discovered that colour gets difficult when you go for grayscale! You all knew that, didn't you?
I'm not putting the logo up here because I don't want to ask a question that's too far off the purpose of the board. So, if I can't show it here can anyone suggest another forum where people do that kind of stuff and are kind to novices please?
Many thanks
Martin
Well, having a look around I think I might not be going to far off by asking so...
http://www.imagesandwords.org.uk/test/illylogo.html
Anything really, but bear in mind It's very like the original except it had no style, no color and less er.. precision

>How can I make the logo better for colour and B&W?
As I understand it, you are troubled -- among many things -- by the lack of differentiation among the spheres when you convert to grayscale. Is that correct?
If so, there are some things to consider. For example, the original uses only two attributes -- color and size -- to differentiate the spheres. Otherwise, you have the same shapes and the same gradient fills (other than base color).
When you remove color from the equation, you're left with only one differentiating attribute: size. Not surprisingly, you find yourself facing a dull uniformity -- the monotonicity produces monotonousness. Now, the challenge is to add back some differentiating features.
Not a whole lot of choices here. You can develop different gradient fills for a subtle effect, but you have to be careful: If the "lighting" changes dramatically among spheres, you'll end up with an unnatural look.
You might consider forgetting about gradient fills altogether and go with solid or texture fills. Sometimes, simpler is better... especially with a logo.

Is anyone out there that can help me? Questions about connecting to new PC

I had to replace my PC & do not have a backup for my phone. I have copied photos to flashdrive to put on new one, but not sure what to do about contacts. I have looked around the discussions & did the transfer purchases from iphone, so hopefully that will take care of things bought on the phone. Someone discussed how to create a backup, by right clicking under device. If I do this to my phone before I sync with the new computer, will I be able to create a backup that I can use to salvage all the info on my phone that I can't drag & store on my own? Or will this delete all of my phone information, just like syncing with the new computer will? I appreciate all of the anticipated help, this is not my forte!
I posted last night, but no help............hoping it was just bad timing......

Okay! I have been dipping in the pool a toe at a time. I backed up the phone, never could find it in my files, but whatever. I synced notes, calendar & contacts, one at a time & everything copied to my PC. Now, I have to move on to the real world & get things done. But will attempt later to salvage music & ringtones. If you have any advice.....
Thanks for all of your help & support!!

NEED HELP WITH A QUESTION ABOUT PURCHASING A NEW IPOD AFTER GIVING MY OLD

IPOD TO MY SON. IT WAS FILLED WITH 3600 SONGS AND I STILL HAVE THOSE SONGS IN MY ITUNES LIBRARY. MY QUESTION IS CAN I BUY A NEW IPOD AND LOAD IT ON COMPUTER USING MY ITUNES LIBRARY--I MEAN WILL ITUNES AND MY COMPUTER RECOGNIZE THE NEW ONE. IF NOT, WHAT CAN I DO? JEFF

You should be fine, just make sure the new one has the current firmware, dock it to the computer, & away you go.
Please kill the "caps lock" key when posting, it's considered to be shouting & it's rude. Thanks.

Need help.. Question about connectivity of PS2 with Creative A2ZS Video Edit

Hi everyone, i have question regarding creative A2ZS video editor.. please forgive me for my innocent question since im new here..
I own a Play Station 2.. can this video editor allow me to connect my PS2 and show the display on the monitor so that i can play my PS2 game on the monitor? it's like functioning like a VGA box.. thanks!Message Edited by nicholas_23 on 05-9-200709:46 AM

If you hook the standard analog video outputs of the PS2 (the ones that would go to the TV) into the Video Editor and get into the VidCap applet (free download from the Creative Website), drag the Preview window so its full screen, then you can use your laptop or desktop as a "TV".
-Chrisi

Help with a question about making/running .jar files.

First i have a question, can i make a .jar file that can run on a computer without JRE installed. And if i can, how do i make it. I have tried to make it on my computer, that has JRE but i keep getting the error when i run it: Exception in thread "main" java.lang.NoClassDefFoundError: Sample\FileSearchAnd im using the command:
jar cvfm jarname.jar directory\manifest.txt directory\FileSearch.class directory\FileNode.classIt says it creates the .jar but is unable to run it.

dford425 wrote:
First i have a question, can i make a .jar file that can run on a computer without JRE installed. No, not unless you package the JRE with your dist. Hence the name JRE (Java Runtime Environment).
And if i can, how do i make it. I have tried to make it on my computer, that has JRE but i keep getting the error when i run it: Exception in thread "main" java.lang.NoClassDefFoundError: Sample\FileSearch
That simply means your not pointing the runtime to the classes. Set your CLASSPATH environment variable correctly and it will run (given you have a JRE which it appears you do).
And im using the command:
jar cvfm jarname.jar directory\manifest.txt directory\FileSearch.class directory\FileNode.classIt says it creates the .jar but is unable to run it.

Please help me:one question about Assest Depreciation.

In T-CODE ABAON I fill all of the necessary fileds and click save but the sap raise some error message like below.So in T-CODE AO90,I select chart of account->account determ->Depreciation,and input my G/L Acct 5201 in the field of 'Acc.dep. accnt.for ordinary depreciation' and save.Then I exit and go to T-CODE ABAON and try again,but the error still exist.It seems not work to what I have done in T-CODE AO90.I don't know why and how to resolve this problem.So I need your help.Thank you so much.
error message:
Account 'Acc.dep. accnt.for ordinary depreciation' could not be found.
Message no. AU133
Diagnosis
When creating the accounting document, the system could not find account 'Acc.dep. accnt.for ordinary depreciation' for company code HJW1.
Procedure
Enter this account in the account determination for Asset Accounting.
Message was edited by:
Melody H.

Hi,
Check the following:
1. In ur asset class check the Acct determination & for this acct detr check the gl account in AO90.
2. check ur GL accounts.
3. Or are u making the changes in the same client or other & have u transported the request or not?
or sometimes it is necessary to terminate the session and relogin then check.
Regards,
Meenakshi

Help me. Question about print

This is Test Source...
When executed this source, my output is printed as portrait form but I want landscape form. Help me.... please....
----------------- Test Source -------------
import java.io.*;
import java.net.*;
import java.awt.*;
import java.util.Vector;
import javax.print.StreamPrintService;
class BAR
private static ServerSocket serverSocket = null;
private static Socket sendClientSocket = null;
private static String IP = "10.10.130.234";
private static int portNo = 9100;
private static PrintWriter out = null;
private BufferedReader in = null;
private static StringBuffer sb = new StringBuffer();
private static String Message1 = null;
private static String Message2 = null;
private static String Message3 = null;
private static String Message4 = null;
private static String Message5 = null;
private static String Message6 = null;
private static String Message7 = null;
public static void main (String[] args)
System.out.println("Hello World!");
try {
System.out.println(": try connection [IP] "+IP+" [portNo] "+portNo);
sendClientSocket = new Socket();
sendClientSocket.connect(new InetSocketAddress(IP, portNo));
System.out.println(": connection host.!!!");
System.out.println("connect: "+ sendClientSocket.getLocalAddress() + " "+ sendClientSocket.getInetAddress() + " " + sendClientSocket.getPort());
String[] temp = {
"1","2","3","BAT MAN","SUPER MAN","ICE MAN","CODE NAME","SUCCESS__!!!!!!!","WONLIM KIM","SIN CHOI",
"JUNGHUN HAN","12","13","14","15","PDA","TABLET","HMI","BARCORD PRINTER","LASER PRINTER",
"RF PANEL","RF READ","NOTEBOOK","24","25","26","27","28","29","30",
"31","32","33","34","35","36","37","38","39","40",
"41","42","43","44","45","46","47","48","49","50",
"51","52","53","54","55","56","57","58","59","60",
"61","62","63","64","65","66","67","68","69","70"
String blankArea = " ";
String blankArea2 = blankArea+blankArea+blankArea;
String blankArea3 = blankArea2+blankArea2+blankArea2;
String nextLine = "\n\r";
String nextLine2 = nextLine+nextLine+nextLine+nextLine;
Message1 = blankArea2+temp[3]+blankArea3+temp[8]+nextLine;
Message2 = blankArea2+temp[4]+blankArea3+temp[9]+nextLine;
Message3 = blankArea2+temp[5]+blankArea3+temp[10]+nextLine;
Message4 = blankArea2+temp[6]+nextLine;
Message5 = blankArea2+temp[7]+nextLine2;
Message6 = blankArea2+temp[15]+blankArea3+temp[16]+blankArea3+temp[17]+blankArea3+temp[18]+nextLine;
Message7 = blankArea2+temp[19]+blankArea3+temp[20]+blankArea3+temp[21]+blankArea3+temp[22]+nextLine;
sb.append(Message1);
sb.append(Message2);
sb.append(Message3);
sb.append(Message4);
sb.append(Message5);
sb.append(Message6);
sb.append(Message7);
out = new PrintWriter(sendClientSocket.getOutputStream(), true);
out.println(sb.toString());
} catch (Exception e) {
e.toString();
finally {
try
if (out != null) out.close();
if (sendClientSocket != null) sendClientSocket.close();
} catch (Exception e) {}
}

Either read the documentation for your printer or print using Java's javax.print API.

HELP! A QUESTION ABOUT CHARING!

hey i know that when your done charging your ipod it says "charged". Would it be ok if i left the thing overnight if i was asleep, or should i get the charger out as soon as it says "charged"?

The iPod ceases to charge after it is full. Read about it here:
http://docs.info.apple.com/article.html?artnum=61127

Plz help me .... A question about JOPI

Similar Messages

Maybe you are looking for