Plz help me c2d case warping

hi there, i have my 2.16 core 2 duo mbp for almost 2 weeks and iv noticed when the lid is closed there is a 1 mm gap on one side is this normal? im using a marware protection pack but would like it if i didnt have to tkae it off. what do i do should i take it to an apple centre to ask about it ? will this get any worse than it is? plz help anyone thanks alot.

Are you able to confirm whether the case is warping or whether it's a simple case of the hinge not be quite aligned. There's a big difference. If it concerns you then take it to an Apple Store and have a Genius look at it.
This sort of thing does happen and does not affect the use of your MBP. I personally wouldn't worry about if it doesn't affect your ability to close the lid although everyone is different.

Similar Messages

Plz help me in case statement

Hi All,
In a table OT_C_S_R_HEAD in this there is a column "CSR_STATUS" having datatype "Number" and i have to apply case on this that if "2 or null is no, 1 is yes".
But apply getting some error "ORA-00932: inconsistent datatypes: expected NUMBER got CHAR"
SELECT
CSR_AOE_NO
, CASE CSR_STATUS
WHEN '2' THEN ('NO')
WHEN '1' THEN ('YES')
WHEN NULL THEN ('NO')
END CSR_STATUS
FROM OT_C_S_R_HEAD
plz reply asap....

Welcome to the forum!
This is NOT the forum for SQL or PL/SQL questions. As the title says this forum is for sql developer questions only.
If you have any additional comments or follow please DO NOT followup in this forum but repost the question in the sql and pl/sql forum.
PL/SQL
>
In a table OT_C_S_R_HEAD in this there is a column "CSR_STATUS" having datatype "Number" and i have to apply case on this that if "2 or null is no, 1 is yes".
But apply getting some error "ORA-00932: inconsistent datatypes: expected NUMBER got CHAR"
>
The reply that you marked CORRECT will not cause the exception you were receiving but it will also NOT give you the results you want.
create table a (col1 number)
insert into a values (null)
insert into a values (1)
insert into a values (2)
insert into a values (3)
SELECT col1, CASE col1
WHEN 2 THEN ('NO')
WHEN 1 THEN ('YES')
WHEN NULL THEN ('NO')
END test
FROM a
COL1,TEST
1,YES
2,NO
3,You said you wanted 'NO' if the column has a NULL value but that query gives you a NULL. The query will also give you NULL for values other than 1 or 2 because there is no ELSE clause. Except in unusual cases there should always be an ELSE clause as a 'catch all'.
If all you want is YES for a 1 and NO for anything else just use
SELECT col1, CASE col1
WHEN 1 THEN ('YES')
ELSE ('NO')
END test
FROM a
COL1,TEST
,NO
1,YES
2,NO
3,NO

TRYING TO FIND A CASE! PLZ HELp

I have the ipod touch 4g and i was looking for a good case to protect it.im trying to find a case with a built in screen protector.PLZ HELP
THANK YOU.

You can search for iPod Touch 4g Cases at amazon.com, griffintechnology.com, and belkin.com. I don't know what's taking Apple so long to put new touch 4G cases on their website.

Well i set a passcode on my iphone 4 and ive forgotten it i have no idea what to do and i only just got this phone plus i dont want to do these bypassing with emergancy call just in case i get it wrong plz help (urgent)

well i set a passcode on my iphone 4 and ive forgotten it i have no idea what to do and i only just got this phone plus i dont want to do these bypassing with emergancy call just in case i get it wrong plz help (urgent)

If you set the phone to erase on 10 failed passcodes - then just keep typing and it will wipe itself.
Otherwise I believe you can set it to recovery mode and restore etc.. via iTunes... There is no easy way as the passcode is designed to protect the phone exactly against what you are trying to do now...
http://osxdaily.com/2011/01/08/iphone-recovery-mode/
Others may have some additional tips !
Sorry for the probs you are having...
Regs Neil

I restored my Macbook Pro and now I can't log in as Admin - it says there is an error with FileVault and I don't have access - plz help! thank you.

I had to restore my Macbook Pro from Time Capsule yesterday and now when I go to log in as my usual Admin, it says there is a FileVault error and my access is denied. I created another temporary Admin acct, but everything I had on my desktop, etc is "gone" I can look up the "drive' or wahtever it's called, but I can't access any of it. All I want to do is log back in as my usual self (the regular Admin) - plz help! Thanks. p.s. I"m (obviously) not that computer savvy!

Triple-click the line below to select it:
/System/Library/CoreServices/Directory Utility.app
Rght-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu.* The application Directory Utility will open.
In the Directory Utility window, click the lock icon and authenticate. Select the Directory Editor tool in the toolbar. Select Users from the Viewing menu in the toolbar, if not already selected. Select the affected user account in the list. On the right is a list of properties and values. Select the property "HomeDirectory" and delete it by clicking the minus-sign icon directly below the property list. There are two such icons in the window. You want the one on the right, not the one on the left.
CAUTION: Do not click the minus-sign icon on the left, below the user list.
Then click the Save button in the lower right corner of the window. Quit Directory Utility.
CAUTION: There is no "undo" in Directory Utility. If you make a mistake and delete something in the Directory Editor that should not have been deleted, restore your whole system from a backup and start over. I have no other help to offer in that case.
Try again to log in as the affected user. If you can log in, you should find a file in the home folder with the name of the user and the filename extension "sparseimage" or "sparsebundle". Double-click that file. A disk image should open. Copy your files from that disk image to restore them.
I strongly suggest that you deactivate legacy FileVault in the Security & Privacy preference pane, then log out and log back in. Consider activating FileVault 2 if you want that kind of security.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

My recirculating pump in sub vi simulation link doesnt work in the second iteration .It opens for maybe half a second whereas i gave the time delay for 5 secs..plz help very urgent

Hi,
I have attached my simulation loop.In the model attached i hav eone main pump with constant rpm which drives the 5 smaller pumps and fills the tank at the same time.As soon as the tanks reach their 90% level,the valves of the five pumps close(SP1,SP2,SP3,Sp4,Sp5).After that the recirculating pumps opens for 5 secs of the first tank.As soon as the recirculation finishes,the drain valve(SV1) for tank 1 open and the volume goes to interim storage.This happens for all the remaining tanks.
My simulation works the first time,but when the second time the loop starts,it skips the recirculation pump even though i gave a time delay for 5 secs.Plz help ..I have attached the simulation.
Thanks,
Rami
Attachments:
Spatial Logic_2_Final.vi ‏223 KB

Rami,
I suspect that you have a race condition. The widespread use of local variables frequently leads to race conditions. Your subVI (Spatial Logic Sub_2.vi was not included) so I cannot run the VI. You have no way of knowing whether the subVI or the inner case structure will execute first, because there is no data dependency between them.
I think a shift register or a few and some dataflow thinking would allow you to eliminate the inner case structure, the local variables, and, probably, most of your problems.
Some of the SPi are indicators and some are controls. How are they used?
The last case of the inner loop retursn to Case 1. Would case 0 be better?
As for the second time through issue, it may be related to the Elapsed time function Auto Reset. From the help file: "Resets the start time to the value in Present (s) when the Express VI reaches the Time Target (s)." If more than 5 seconds elapses between the first time you use this and the next, it will exit immediately on the subsequent calls.
Lynn

While trying to change password getting ora-00600 [4842] - Plz help

while trying to change password getting ora-00600 [4842] - Plz help
database : 9.2.0.4
o/s : Linux

Hi,
when getting an ORA-600 you always should contact Oracle support please ;-)
To diagnose an ORA-600 the stack trace will be necessary - see the trace file mentioned in the alert.log when the ORA-600 did happen.
But FIRST OF ALL you should definitely apply patch set 9.2.0.8 and see if this error happens again (metalink.oracle.com ==> PATCHES ==> Quick Links ==> <your platform>). Support will ask you to do the same before they start diagnosing anything in this case.
And please keep in mind that 9.2.0 has reached end of Premier Support more than 1 year ago.
Kind regards
Mike

Experts plz help its very urgent

hi expert
plz help- me
previously i was getting dump in this statement
TRANSFER v_tab TO p_file.
FYI:
here v_tab is a table which hav som records
and p_file contains the path of a file like c:\new\ggg.txt
DATA: v_tab TYPE STANDARD TABLE OF t_line WITH HEADER LINE,
TYPES: BEGIN OF t_line,
       pspid(9) TYPE c,
       tab1 TYPE x,
       post1 TYPE proj-post1,
       tab2 TYPE x,
       vernr TYPE prps-vernr,
       tab3 TYPE x,
END OF t_line.
DUMP I WAS GETTIN :
For the statement
   "TRANSFER f TO ..."
only character-type data objects are supported at the argument position
"f".
In this case. the operand "f" has the non-character-type "T_LINE". The
current program is a Unicode program. In the Unicode context, the type
'X' or structures containing not only character-type components are
regarded as non-character-type.
to avoid this dump i used feild symbol
assign V_TAB to <IN> casting.
      p_file = <in>.
      unassign <IN>.
nw there is no dump
but problem is p_file contains the contents of v_tab not the file path .
plz help me its very urgent
thanx in advance

Hey, no probs,
after your initial declaration, do this.
TYPES: BEGIN OF n_line,
pspid(9) TYPE c,
tab1(15) TYPE c,        "check the length you want
post1 TYPE proj-post1,
tab2(15) TYPE c,         "check the length you want
vernr TYPE prps-vernr,
tab3(15) TYPE c,         "check the length you want
END OF t_line.
DATA: n_tab TYPE STANDARD TABLE OF n_line WITH HEADER LINE.
now after you fetch data into v_tab,
move it to n_tab.
using a loop at v_tab and move corresponding fields to n_tab's work area
append to n_tab.
once you have populated n_tab and are ready to TRANSFER.
OPEN your file using
open dataset <file> for output in text mode encoding default.
now
loop at n_tab.
TRANSFER n_tab to p_file.
endloop.
CLOSE DATASET.

Plz Help me.Very urgent

Hi Frds,
When i am creating generic data source for master data table KNKK, getting following error : Invalid extract structure template KNKK of data source ZRF_KNKK_CRDMNGT. why I am getting error?
In the table/view entered KNKK. may be this is wrong. So i have to create View compulsory to master data generic data source.
Plz Help me . Very urgent

Hi,
Check your table knkk...does that table have any currency or weight units?
if it have any of the above units then those units might be referring to some
fields.
Currency and weight unit fields should always refer to fields in its own table.
In your case,it should refer to some field in KKNK table.
If your currency or weight field is referring to some other table then while
creating the datasource you will get the error mentioned by you.
Regards,
Senoy

Plz help! my ipod no longer gets charged when connected to my computer

as the topic suggests, my ipod with video(5.5G) always shows that its fully charged when connected to my computer. but it wasn't like this a period of time ago, i wonder why. plz help me. i now dare not to transport more than 1g files to my ipod in case it would run out of battery and sth worse may follow...
since my computer is old with a celeronA 533(overclocked to 760, not a big difference), i closed lots of the system services which i think are useless, maybe that's the problem? but which service should i start? ipodservice.exe is always running when i connect my ipod with my pc
btw, i must say sorry with my poor english, hope you understand what i mean

If you mean that when plugged in it shows the iPod being fully charged but when you disconnect the battery is actually dead, then you probably have a defective battery.
Patrick

Hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!

hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!
iv unistalled flash, iv checked plug ins it just wont work,

It would have been a great help to know precisely what Mac you have, so some of the following may not apply:
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
(If you are running Mavericks: After years of fighting malware and exploits facilitated through Adobe's Flash Player, the company is taking advantage of Apple's new App Sandbox feature to restrict malicious code from running outside of Safari in OS X Mavericks.)
* Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser.
You can also try these illustrated instructions from C F McBlob to perform a full "clean install", which will resolve the "Blocked Plug-in" message when trying to update via the GUI updater from Adobe.
Use the FULL installer for 12.0.0.44: Flash Player 12 (Mac OS X)
And the instructons are here: Snow Leopard Clean Install.pdf
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, try the following solution which fools the site into thinking that you are running the version 11.5.502.55:)
Download this http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

We are not able to execute below procedure, plz help me ASAP.

Dear All
I am created one procedure with 4 parameter 1 is Ref Cusrsor rest of 3 are Varchar,But we are not able to execute below procedure, plz help me ASAP.
CREATE OR REPLACE PROCEDURE GETCHART(RPT_CURSOR OUT RPT_PACKAGE.RPT_RESULTS,
V_VITALCHARTING VARCHAR2,
V_DOCIDPATIENTS VARCHAR2,
v_fromdate varchar2,
v_todate varchar2) AS
D1 VARCHAR2(500);
D2 VARCHAR2(500);
G1 VARCHAR2(500);
R1 VARCHAR2(500);
R2 VARCHAR2(500);
R3 VARCHAR2(500);
R4 VARCHAR2(500);
R5 VARCHAR2(500);
H1 VARCHAR2(500);
H2 VARCHAR2(500);
V_COUNT NUMBER;
RC VARCHAR2(100);
RMI VARCHAR2(100);
RMAX VARCHAR2(100);
R12 VARCHAR2(500);
REQ NUMBER;
V_MAX number;
v_idcount number;
RSEQ NUMBER;
RCH VARCHAR2(500);
BEGIN
INSERT INTO TEMPDATA
SELECT ROWNUM G, TIME1
FROM (SELECT distinct TO_CHAR(H.RECORDEDDNT, 'mm/dd/yy hh24:mi:ss') TIME1
FROM VIEW_PATIENTCHART V,
chartingtxheader H,
chartingtxdetails D
WHERE h.docid = d.docidchartingtxheader
and v.VITALCHARTING_PK = h.docidvitalcharting
and v.VITALPARAMETER_PK = d.docidvitalparameter
and v.VITALCHARTING_PK = V_VITALCHARTING --General Vital Signs
and H.DOCIDPATIENTS = V_DOCIDPATIENTS
and TO_DATE(to_char(h.recordeddnt, 'DD/MM/YYYY'),
'DD/MM/YYYY') BETWEEN
TO_DATE(v_fromdate, 'DD/MM/YYYY') AND
TO_DATE(V_TODATE, 'DD/MM/YYYY'));
SELECT MAX(ID) INTO V_MAX FROM TEMPDATA;
V_IDCOUNT := 0;
WHILE V_IDCOUNT < V_MAX loop
FOR J IN (SELECT id, ROWNUM G, vdate time1
FROM (SELECT id, ROWNUM, VDATE
FROM TEMPDATA
WHERE ID BETWEEN V_IDCOUNT + 1 AND V_IDCOUNT + 8)) LOOP
D1 := D1 || 'COL' || J.G || ',';
D2 := D2 || '''' || J.TIME1 || '''' || ',';
END LOOP;
D1 := SUBSTR(D1, 1, LENGTH(D1) - 1);
D2 := SUBSTR(D2, 1, LENGTH(D2) - 1);
DBMS_OUTPUT.PUT_LINE(d1);
SELECT SEQ_GETCHART.NEXTVAL INTO RSEQ FROM DUAL;
G1 := 'INSERT INTO GETDATA2 (IDSLNO,idcount,' || D1 || ') VALUES(' || RSEQ || ',' ||
V_IDCOUNT || ',' || D2 || ')';
--EXECUTE IMMEDIATE G1;
DBMS_OUTPUT.PUT_LINE(d1);
DBMS_OUTPUT.PUT_LINE(SUBSTR(D2, 1, LENGTH(D2) - 1));
DBMS_OUTPUT.PUT_LINE(G1);
EXECUTE IMMEDIATE G1;
FOR K IN (SELECT id, ROWNUM G, vdate time2
FROM (SELECT id, ROWNUM, VDATE
FROM TEMPDATA
WHERE ID BETWEEN V_IDCOUNT + 1 AND V_IDCOUNT + 8)) LOOP
FOR I IN (select s.*, rownum hslno
from (SELECT v.CHARTNAME,
v.PARAMETERNAME_CS,
' ' || v.PARAMETERNAME PARAMETERNAME,
TO_CHAR(H.recordeddnt, 'mm/dd/yy hh24:mi:ss') TIME1,
CASE
WHEN IDSLNO_GN5029 IN (1040, 1041) THEN
CASE
WHEN TO_NUMBER(d.recordedvalue) <
TO_NUMBER(D.MINVALUE) THEN
decode(d.recordedvalue,
null,
d.recordedvalue,
d.recordedvalue || ' ' || 'L')
ELSE
CASE
WHEN TO_NUMBER(d.recordedvalue) >
TO_NUMBER(D.MaxVALUE) THEN
decode(d.recordedvalue,
null,
d.recordedvalue,
d.recordedvalue || ' ' || 'H')
ELSE
decode(d.recordedvalue,
null,
d.recordedvalue,
d.recordedvalue || ' ' || 'N')
END END ELSE d.recordedvalue END IMAGECHAR,
d.minvalue,
d.maxvalue,
D.UOMCODE
FROM VIEW_PATIENTCHART V,
chartingtxheader H,
chartingtxdetails D
WHERE h.docid = d.docidchartingtxheader
and v.VITALCHARTING_PK = h.docidvitalcharting
and v.VITALPARAMETER_PK = d.docidvitalparameter
and v.VITALCHARTING_PK = V_VITALCHARTING --General Vital Signs
and H.DOCIDPATIENTS = V_DOCIDPATIENTS
ORDER BY V.DISPLAYORDER_CS, V.DISPLAYORDER
-- v.PARAMETERNAME_CS,v.PARAMETERNAME
) s
where s.time1 = k.time2) LOOP
select count(1)
into v_count
from GETDATA2 d
where d.PARAMETERNAME_CS = i.PARAMETERNAME_CS
and PARAMETERNAME = i.PARAMETERNAME
and idcount = v_idcount;
IF V_COUNT = 0 THEN
RCH := I.CHARTNAME;
R1 := 'COL' || K.G;
R2 := '''' || I.PARAMETERNAME_CS || '''' || ',';
R3 := '''' || I.PARAMETERNAME || '''' || ',';
R4 := '''' || I.IMAGECHAR || '''';
RC := '''' || I.CHARTNAME || '''' || ',';
RMI := '''' || I.minvalue || '''' || ',';
RMAX := '''' || I.maxvalue || '''' || ',';
R12 := '''' || I.UOMCODE || '''' || ',';
SELECT SEQ_GETCHART.NEXTVAL INTO RSEQ FROM DUAL;
H1 := 'INSERT INTO GETDATA2 (IDSLNO,UMCODE,idcount,CHARTNAME,minvalue,maxvalue,PARAMETERNAME_CS,PARAMETERNAME,' || R1 || ')' ||
' values(' || RSEQ || ',' || R12 || v_idcount || ',' || RC || RMI || RMAX || R2 || R3 || R4 || ')';
EXECUTE IMMEDIATE H1;
ELSE
R5 := 'COL' || K.G;
R4 := '''' || I.IMAGECHAR || '''';
H2 := 'UPDATE GETDATA2 SET ' || R5 || '=' || R4 ||
'WHERE PARAMETERNAME_CS=' || '''' || I.PARAMETERNAME_CS || '''' ||
' AND ' || 'PARAMETERNAME=' || '''' || I.PARAMETERNAME || '''';
EXECUTE IMMEDIATE H2;
END IF;
END LOOP;
end loop;
UPDATE getdata2 s
set s.parametername = s.parametername || ' -' || ' (' || minvalue ||
' -- ' || maxvalue || ') ' || UMCODE
where s.parametername is not null
and idcount = v_idcount
and minvalue != 0
and maxvalue != 0;
UPDATE getdata2 s
set s.parametername = s.parametername || ' -' || UMCODE
where s.parametername is not null
and idcount = v_idcount
and minvalue = 0
and maxvalue = 0;
UPDATE GETDATA2 S
SET S.PARAMETERNAME_CS = NULL
WHERE ROWID NOT IN (SELECT MIN(ROWID)
FROM GETDATA2
WHERE idcount = v_idcount
GROUP BY PARAMETERNAME_CS)
and idcount = v_idcount;
UPDATE GETDATA2 S
SET CHARTNAME = NULL
WHERE ROWID NOT IN (SELECT MIN(ROWID)
FROM GETDATA2
WHERE idcount = v_idcount
GROUP BY CHARTNAME)
and idcount = v_idcount;
UPDATE getdata2 s
set s.parametername = ' PARAMETER'
where s.parametername is null
AND S.PARAMETERNAME_CS IS NULL;
v_idcount := v_idcount + 8;
D1 := null;
d2 := null;
end loop;
for i in (SELECT G.PARAMETERNAME_CS, G.IDSLNO
FROM GETDATA2 G
WHERE G.PARAMETERNAME_CS IS NOT NULL) LOOP
INSERT INTO GETDATA2
(IDSLNO, PARAMETERNAME)
VALUES
(I.IDSLNO - 1 + 0.5, I.PARAMETERNAME_CS);
END LOOP;
update GETDATA2 h set h.PARAMETERNAME_CS = null;
update GETDATA2 h set h.chartname = rcH;
INSERT INTO GETDATA1
SELECT CHARTNAME,
PARAMETERNAME_CS,
PARAMETERNAME,
COL1,
COL2,
COL3,
COL4,
COL5,
COL6,
COL7,
COL8,
COL9,
COL10,
MINVALUE,
MAXVALUE,
UMCODE
FROM GETDATA2
ORDER BY IDSLNO;
OPEN RPT_CURSOR FOR
SELECT * FROM GETDATA1;
END;
CREATE OR REPLACE PACKAGE "RPT_PACKAGE"
as
type RPT_RESULTS is REF CURSOR;
type RPT_VARRAY is VARRAY(2000) of VARCHAR2(2000);
END RPT_PACKAGE;
Execute
declare
type my_newcursor IS REF CURSOR;
begin
GETCHART(my_newcursor,'General Vital Sign','1145561',sysdate-1,sysdate);
end;

Parwez wrote:
Dear All
I am created one procedure with 4 parameter 1 is Ref Cusrsor rest of 3 are Varchar,But we are not able to execute below procedure, plz help me ASAP.
see a picture of my car.
my car won't go.
tell me how to make my car go.
How do I ask a question on the forums?
SQL and PL/SQL FAQ

Plz help plzzzzzz

hi i m advanced windows user and im new in the mac world i need help i know now that this is a new and better world and i just need understand something, plz can somebody tell me how can i give mantinance to my mac couse its getting slow and i think that i have to maybe delete unnecessary files and stuffs like that i dont know how to do that, i had already upgrade my os and still its slow really slow and i dont have the os x disk plz if somebody know what to do plz help me. thanks
powerbook g4 667 mhz Mac OS X (10.3.9)

So I assume from your post (i dont have the os x disk) means that you borrowed an OS X disk from someone? If that's the case, then sorry, but most people here frown on the use of pirated software.

Plz help me,i did everything and nothing has worked,im going insane!!!

Hello people,for months ive tried fixing my i-pod and nothing has worked....i try to restore my ipod maybe that would fix da problem but when i press the program,it says ipod service error,and before that it worked ok,it said preparing and stuff but it never stoped perapring the ipod it just got stuck,and in my itunes i see my ipod,but i cant put no music in it?Therefore i have the 2 colour lights all the time when i try to play it.and also when i try to update my ipod with the program u download from the net it says in the end of the installation:Service could not be deleted.All these problems,could someone plz help me,im turning insane!And i cant refund my ipod because i lost my recite and also the store isnt anymore there(My luck)but plz somebody answer me,thank u

I believe the green and orange light flashing means that you have no music on your iPod Shuffle (which seems correct as you have performed a restore). That is the way the iPod Shuffle tells you that it is looking for the next song. When the iPod Shuffle is plugged into your computer (XP user myself) the orange light is suppose to flash on and off (both the battery light if charging and the front light). When updating the iPod using the updater, I received the same error you received (iPod service error), but I believe it was because I was trying to update my iPod with the Sept 05 version when the iPod already had the Jan 06 update on it. I also noticed the "preparing" bug that you mentioned, by simply selecting next, the restore continues correctly. Once I restored my iPod to the factory settings AND performed the restore process THREE times using the Sept 05 updater (what came with my iPod Shuffle) I was able to store music AND listen to it once disconnected from my computer. My next task is to update the iPod with the Jan 06 update and try the process again but I believe there is a driver issue with this version and it may not work. If this is the case, I will just stick with the software received with the iPod. For you, I would attempt to reinstall the software from the CD that was provided with you iPod Shuffle, restore your iPod Shuffle to the factory settings and do this restore THREE times, start iTunes, once the iPod Shuffle shows up in the Source listing right click on it and select Update. Make sure songs copy over (the top centre of iTunes will tell you the status of the update) and finally disconnect and try playing music.

Is there any official market or store or anything in Egypt to fix my iphone 4 it jumped from 5th floor and the back hous was crashed and the network sensor was not working good but the phone and the screen and the others things are ok so plz help ???

Is there any official market or store or anything in Egypt to fix my iphone 4 it jumped from 5th floor and the back hous was crashed and the network sensor was not working good but the phone and the screen and the others things are ok so plz help ???
my iphone is now just coverd with case and the back house is crased

Etisalat, Mobinil and Vodafone provide warranty service in your country. You can also search Google for a 3rd party repair shop near you.

Plz help me c2d case warping

Similar Messages

Maybe you are looking for