Plz.. Help me..... Concurrent program ended with errored.

hi alll....
I am on working on Oracle Audit trail for mtl_system_item_b (ie. whenever item is changed, created or deleted , i want to track the data, who delete that item and wat item). I followed the below steps to perform that.
Steps 1:
sysadmin ->Security : AuditTrail->install. I checked weather audit trail is enabled for oracle inventory (ie, in screen i query for inv under oracle username tab and checked weather enabled box is checked).
Steps 2:
Creation of Audit group
navigation : AuditTrail ->Groups.
Application Name: Oracle Inventory
Audit Group: XX inventory
Group State: Enabled
I added audit tables to this group
User Table Name: MTL_SYSTEM_ITEMS_B
Steps 3:
After creation of audit group i run the Concurrent program “*AuditTrail Update Tables*” . It has no parameter..
The request is ended with errored when i ran. Plz help me... Its urgent.
I checked with log file too. It has so many page. finally it displaying
fatal error in fdasql,quitting...
fatal error in fdacv,quitting...

Hi,
Search the log file for more details about the error.
You may also review these documents and see if it helps.
Note: 353326.1 - Audittrail Update Tables : Fatal Error In Fdasql,Fdacv,Fdaupc When Create View
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=353326.1
Note: 563116.1 - AuditTrail Update Tables Program Fails with "Fatal error in fdasql, quitting..."
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=563116.1
Regards,
Hussein

Similar Messages

Program ended with error or warning, return code: F

Friends, During client export i am facing below mention error, Pl suggest asap
Client export from 06.04.2011 18:00:44
System ID............................ PPT
R/3 Release.......................... 700
Basis Support Package...............SAPKB70018
Host................................. pptest
Start in background............. .....X
User................................. SUPER
Parameter
Source client........................ 500
Source client user masters............500
Copier profile:.......................SAP_ALL
Table selection
Command file......................... PPTKT00008
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0012
Error exporting request PPTKT00008 23:40:31
Program ended with error or warning, return code: F
Runtime (seconds) : 20,390
End of processing: 23:40:33

There could be three things possibly causing this error:
1. There is some database issues, that is the connection to the database maybe is lost that's why TP ends.
2. The TP return Code can also arise due to issues at the OS level, where SAP is installed.
3. Due to permission issues also this can creep in. By permission issues I mean there are not enough permissions, please use trace ST01 and run the process again.
Also please paste the Imort Log, as it can help in further analysis and with that please give your database and OS informations.

Tp program ended with error code 0012

during export client from PRD to QAS i got the following error
3 ETA072 Exit program "CLIENTCOPY_SELECT_TEXTID_ALL" successfully executed "20:13:54"
2 ETA090 Command file for "tp" is written under: "PRDKT00029" "20:25:04"
2 ETA091 For client transport, "        55,612" entries entered in command file
2 ETA090 Command file for "tp" is written under: "PRDKX00029" "20:25:04"
2 ETA091 For client transport, "           419" entries entered in command file
2 ETA375 Transport program TP started successfully for "PRDKX00029" "20:25:05"
1 EXT200 Transport control program tp ended with error code "0012""A tool used by tp aborted""EXPORT PRDKT00029 client500 U18 pf=/usr/sap/tr
1 ETA377 Error exporting request "PRDKT00029" "20:54:04"
1 ETA146 Program ended with error or warning, return code: "F"
1 ETA027 Runtime (seconds)         : "         2,455"
1 ETA152 End of processing: "20:54:04"
any can help me
Thanks

Hi Ehab,
Yes !..
ALOG and SLOG can help analyze the problem and provide you the possible solution...
Make sure that you are using updated KERNEL and TP program before exporting the client..
Regards.
Rajesh Narkhede

Concurrent Program ends in Error without any error message - Apps 11.0.3

Hi,
We have a concurrent program which errors out sometimes without any error message in log file or anywhere else. This happens intermittently. Is there anyway to see why this happens ( to see error message somewhere else - like FND tables ?). Any feedback is appreciated. This happens in Oracle Apps 11.0.3.
thanks
Ram

Ram,
Is this a custom or standard concurrent program?
Was this working properly before? If yes, what changes have been done recently?
Did you try to relink the concurrent program executable file and see if this helps? Also, you could enable trace/debug and submit the request again and see if more details are collected in the logs -- See (Note: 296559.1 - FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12).
Regards,
Hussein

Dear All, I am running Creat Autoadjustments, but program ends with error.

Your kind help will be appreciated...
Oracle Receivables: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
ARXAAP module: AutoAdjustment
Current system time is 26-JUL-2012 09:44:17
Starting ARXAAP program
entering main
Current system time is 26-JUL-2012 09:44:17
Invoice Currency: BHD
Remaining Amount: 0 500
Remaining %:
Due Date:
Invoice Type:
Customer Name:
Customer Number: 043 043
Option: 0
Adjustment Type: CHARGES
Activity: 1062
GL Date: 2012/02/29 00:00:00
Adjust Related Invoices: N
Reason Code: CHARGES
validating gl_date
out of validating gl_date
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Finished executing request completion options.
AR-ARXAAP: ERROR from afpoget - Terminating Program
Concurrent request completed
Current system time is 26-JUL-2012 09:44:17
Edited by: Ramesh Ippili on 25/07/2012 11:42 م
Edited by: Ramesh Ippili on 25/07/2012 11:42 م

Please refer MOS note: Autoadjustment Process Fails With An ERROR From AFPOGET [ID 142549.1]
to fix this issue.
regards,

Transport control program tp ended with error code 0008

Hi !
I trying to realize an export of client like that :
Source Client                     400
Target System:                    ASI
Copy Type                         Client Export
Profile                           SAP_RECO
Status                            Ended with Errors
User                              ST01051
Start on                          17.06.2009 / 17:41:00
Last Entry on                     18.06.2009 / 00:20:40
Transport Requests
- Client-Specific                 ASIKT00028
- Texts                           ASIKX00028
The export ended with this error :
Transport control program tp ended with error code 0008
Error when exporting request ASIKT00028 00:20:39
Program ended with error or warning, return code: F
What happen ?
If somebody can help me to solve this problem ?
Regards,
Johan

hai johan ,
of the return code is 008 then it is error,
what have u transported to target just chekc the log an du might find the error ,
just click the expand button of the error and u will get the detials what errror occured
may be some objects might be inactive just chekc once
m.a

Transport control program tp ended with error code 0016

Hello colleagues,
We are getting the following error when exporting system HRP to HRI:
Transport program TP started successfully for HRPKX00005 21:25:45
|   Transport control program tp ended with error code 0016
|   Error exporting request HRPKT00005 00:59:50
|   Program ended with error or warning, return code: F
|   Runtime (seconds)         :         13.876
|   End of processing: 00:59:50
Please could you kindly help us to solve the issue?
Thanks in advance.
Best regards
Edited by: Víctor Barahona Cimas on Nov 12, 2009 3:33 PM

ok thanks

Client export SCC8 - ended with errors

Hi All,
It is very urgent. Please help!
I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
Command file......................... PRDKT00024
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0008
Transport program tp could not be started (RC= 0)
Program ended with error or warning, return code: F
Runtime (seconds) : 9,222
End of processing: 21:04:45
Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
Is this a successfully export or not? please advise.
thanks,
bichloan

Hi All,
It is very urgent. Please help!
I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
Command file......................... PRDKT00024
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0008
Transport program tp could not be started (RC= 0)
Program ended with error or warning, return code: F
Runtime (seconds) : 9,222
End of processing: 21:04:45
Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
Is this a successfully export or not? please advise.
thanks,
bichloan

Client Export ended with errors

Hi All,
It is very urgent. Please help!
I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
Command file......................... PRDKT00024
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0008
Transport program tp could not be started (RC= 0)
Program ended with error or warning, return code: F
Runtime (seconds)         :          9,222
End of processing: 21:04:45
Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
Is this a successfully export or not? please advise.
thanks,
bichloan

In Al11 what does DIR_TRANS pointing to?
Make sure you have enough space there as it will export the 2 files to the transport directory.
Have you tried Remote Client Copy.
Thanks
Adil

Help with Transport control program tp ended with error code 0203

when i import queue and transport queue from dev to prd ,error show:
Transport control program tp ended with error code 0203
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: IMPORT DEVK900298 P01 clientP01 U0 pf=/usr/sap/tra
Return code: 0203
Error text: wrong syntax in tp call
Request: DEVK900298
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary.

Thank you !
My DEV system TP profile parameters is :
TRANSDIR            = /usr/sap/trans
DEV/CTC             = 0
DEV/DBHOST          = P550A
DEV/DBLIBPATH       = /usr/sap/DEV/DVEBMGS01/exe
DEV/DBNAME          = DEV
DEV/DBTYPE          = ora
DEV/NBUFFORM        = 1
DEV/TP_VERSION      = 266
#System from Transport Domain DOMAIN_P01
#TMS:0002:DOMAIN_P01
P01/DUMMY           = 1
P01/NBUFFORM        = 1
P01/TP_VERSION      = 266
P01/CTC             = 1
My PRD system TP profile parameters is :
P01/CTC             = 0
P01/DBHOST          = XCPRD01
P01/DBLIBPATH       = /usr/sap/P01/DVEBMGS01/exe
P01/DBNAME          = P01
P01/DBTYPE          = ora
P01/NBUFFORM        = 1
P01/TP_VERSION      = 266
#System from Transport Domain DOMAIN_DEV
#TMS:0009:DOMAIN_DEV
DEV/DUMMY           = 1
DEV/NBUFFORM        = 1
DEV/TP_VERSION      = 266
DEV/CTC             = 1

Transport control program tp ended with error code 0208

Hello
I installed minisap NW2004s on XP/SP2 VMWARE 4.5. The installation it self's works fine, but have some problems in the stms. when i call the transport queue there appears an error as follow:
System   NSP              Command TMS_MGR_READ_TRANSPORT_QUEUE
Client   000              Service Transport Service
User     TMSADM           Start    Online
Date     12.10.2006       Function TMS_TP_SHOW_BUFFER
Time     07:13:13         Message TP_REPORTED_ERROR
Transport control program tp ended with error code 0208
Errors: error in transportprofil (param missing
unknown,.
Any Idea? Thanks for your help.
Regards, George

Hi
You can edit the parameter profile using RZ10 and RZ11. You should not copy but manually edit the parameters. Also you need to make a consistency check so that the parameters will be copied to the database from the OS level. You will find an option to perform consistency check in RZ11.
Hope that helps.

Transport control program tp ended with error code 0211

Dear Experts,
I have a problem in doing the import after the client export was successfully done.
I am actaully tring to do a client import/export from the PRD server to DEV server.
On PRD the client is 900 and on the DEV the client is 240.
I have manually copied the transport requests created into the
/usr/sap/trans/cofiles and /usr/sap/trans/data folders to the same on the DEV server.
After coping them,
I have tried to add these transport requests to the DEV server queue, i get the following error message
Transport control program tp ended with error code 0211
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: ADDTOBUFFER RT2KT00014 RT1 pf=/usr/sap/trans/bin/T
Return code: 0211
Error text: no info about transport request found
Request: RT2KT00014
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary.
After this I have tried to add the transports to the buffer at the OS level using the command
./tp pf=TPPARAM addtobuffer "RT2KT00014" RT1 U18 by going to the folder
/usr/sap/trans/bin
But it says that the tp is not found.
I have also checked the permissions for the TRANS folder, it has full access i.e 777
This is where i am struck, and the client has to be imported asap as the requirement for the SUPPORT TEAM is very urgent.
We are on AIX, Oracle 10G and ECC6
Thanks and regards
Harry

Dear Imtiaz,
Thanks for your quick fire reply...
The link helped me but it could not resolve my issue..
Infact i found it my self that the transport requests had to be given full FILE PERMISSIONS at the OS level
I logged in as ROOT
and changed directory to /usr/sap/trans/cofile and gave the command
chmod 777 RT00014.RT2 and
chmod 777 RX00014.RT2
and then went to STMS>SYSTEMS>Import View>Extras>Other requests--> Add ..
Here i added the request nos and then it added up in the queue and then i started the import.
Anyway thank you very for your reply..
Awareded points to you.
Thanks and regards
Harry...

STMS: Transport control program tp ended with error code 0232

Dear ERP Gurus,
I just encountered problem with STMS in my PRD system. The import is just stuck up on "tp connecting to database". It won't continue unitl the system gives me this error message:
Transport control program tp ended with error code 0232
Errors: connect failed
The tp System log says:
ERROR: Connect to PRD failed (20090227135454, probably wrong environment)
I have verified that the suggestion in SAP Note 165708 has already been implemented in our DEV, QAS, and PRD instances.
Any idea why I am having this problem? Imports were running fine yesterday. Please help.
Your prompt response is highly appreciated.
Thanks a lot.
Best Regards,
Albert

Hi Albert,
First check import monitor and delete all requests from queue, which are still getting imported.
And go to /usr/sap/trans/tmp and mv all those tmp files to other location.
Then kill all OS jobs which are getting execute with tp.
Check all jobs are runnig fine, related to transportation. If not reschedule the same.
Then start importing.
Before doing this just check whether your stms related RFCs are working fine.
I think One of your RFC is getting struck. just try to change ip or hostname accordingly and try.
Regards
Nick Loy

Transport control program tp ended with error code 0232

Dear all
I've change password for user SAPSR3 by mistake
the result from brtools is "password changed successfully in table OPS$CAPADM.SAPUSER for user SAPSR3"
after that i can not transport to my production client
with error : TP_REPORTED_ERROR
Transport control program tp ended with error code 0232
Can anybody help me please
thanks & rgds,
Della

I've changed my SAPSR3 password to sap but still error
this is the error log from Check Transport Tool
DB Connect            Link to database failed
This is tp version 372.04.70 (release 700, unicode enabled)
Warning: Parameter DBLIBPATH is no longer used.
ERROR: Connect to CAP failed (20091217174435, probably wrong environmen
TRACE-INFO: 1: [dev trc     ,00000] Thu Dec 17 17:44:35 2009
0.007435
TRACE-INFO: 2: [dev trc     ,00000] DlLoadLib() success: dlopen("/usr
0.007448
TRACE-INFO: 3: [dev trc     ,00000] Got
LIBPATH=/usr/sap/CAP/DVEBMGS32/exe:/usr/sap/CAP/DVEBMGS32/exe:/usr/lib
lient from environment
TRACE-INFO: 4:
0.008053
TRACE-INFO: 5: [dev trc     ,00000] Oracle Client Version: '10.2.0.2.
0.008140
TRACE-INFO: 6: [dev trc     ,00000]    >oci_initialize(con_hdl=0, char
0.008158
TRACE-INFO: 7: [dev trc     ,00000] application info callback registe
0.008173
TRACE-INFO: 8: [dev trc     ,00000] OCIEnvCreate(mode=16384=OCI_UTF16
0.010330
TRACE-INFO: 9: [dev trc     ,00000] Client character set UTF16 -> UTF
0.010421
TRACE-INFO: 10: [dev trc     ,00000] Client NLS setting (OCINlsGetInf

Transport Controll Program tp ended with error code 0012

we have 3 instances 1 DEV 2 TEST 3 PROD.
in TCODE:STMS by clicking 'system overview' icon
all systems are showing and domain controller is PROD,
and <u>Test System also defined as Transport Domain Cotroller.</u>
earlier STMS scenario: Transport Route is from DEV to PROD system not to the TEST system.
what I have done:
deleted the Transpor Domain Controller of the TEST system and kept as test system.
create routes from DEV to TEST to PROD.
present STMS problem:
when I am sending Request from the DEV to TEST Request going smootly. but at TEST sytem while importing the Request it is giving the ERROR as "<b>Transport control program tp ended with error code 0012</b>"
please help out me....as soon as possible.

This is definitely the wrong forum for your post. Please repost properly.
Regards, Klaus

Plz.. Help me..... Concurrent program ended with errored.

Similar Messages

Maybe you are looking for