PLZ help me error 4280

i am trying to burn a cd but i keep getting this error 4280 i tried different CDs no use different software same thing here is my dianostics
iTunes 7.0.2.16
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.1
UpperFilters: GEARAspiWDM (2.0.6.1),
Video Driver: NVIDIA GeForce Go 6100\GeForce Go 6100
IDE\DiskST98823A_______________________________3.06___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomMATSHITADVD-RAM_UJ-850S________________1.21___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
E: MATSHITA DVD-RAM UJ-850S, Rev 1.21
Data or MP3 CD in drive.
Found 1 songs on CD, playing time 68:56 on CDROM media.
Track 1, start time 00:02:00
Get drive speed succeeded.
The drive CDR speeds are: 4 8 12 16 24.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive E: MATSHITA DVD-RAM UJ-850S on CDRW media at speed 4X.
sume one please help me

There is an option when starting the sapinst program to avoid starting up an installation GUI and instead wait for a connection from a remote installation console. I believe it is:
./sapinst -nogui (or something very similar, check the installation guide)
The server will now wait for a response from your terminal. Use the remote installation program and enter the port number of the server. If you just run the sapinst program without the nogui flag you may run into some issues. And make sure your versions match up. I have run into an issue before where I didn't realize I was using a verion of the remote installation program that didn't match up with sapinst server program.
Message was edited by:
Harrison Holland

Similar Messages

Can someone help with Error 4280?

Hi-
I am getting Error Code 4280 every time I try to burn a cd. Can someone help me get past this?
John
Here are my diagnostics:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Dell Computer Corporation Dimension 2400
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: Pfc (2.5.0.204), PxHelp20 (2.0.0.0), Cdr4_xp (5.3.4.21),
UpperFilters: pwd_2k (5.3.4.59), Cdralw2k (5.3.4.21), GEARAspiWDM (2.0.4.3),
Video Driver: Intel(R) 82845G/GL/GE/PE/GV Graphics Controller\Intel(R) 82845G /GL/GE/PE/GV Controller
IDE\DiskWDCWD2500JB-00GVA0____________________08.02D08, Bus Type ATA, Bus Address [1,0]
IDE\DiskWDCWD800BB-75CAA0_____________________16.06V16, Bus Type ATA, Bus Address [0,0]
IDE\CdRomHL-DT-STDVD-ROM_GDR8162B_______________0015___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomNEC_CD-RW_NR-9300A_____________________105B___, Bus Type ATA, Bus Address [1,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: HL-DT-ST DVD-ROM GDR8162B, Rev 0015
Drive is empty.
E: _NEC CD-RW NR-9300A, Rev 105B
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 16 24 32 40 48.
The drive CDRW speeds are: 4 8 16 24.
The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive E: _NEC CD-RW NR-9300A on CDR media at speed 48X.

Hi JKost,
This error is usually a "Optical Power Calibration error" and can be caused by software conflicts, a firmware that needs to be updated, or a blank CD that the drive cannot read/write too (Not all drives are compatible with all brands of blank CDs sad to say)
I tried to look for your exact CD burning model on the dell site for a "Dimension 2400" but didn't see an exact model matching "NEC CD-RW NR-9300A" so if it is a burner that came with the PC when you bought it, you will have to goto the dell site www.dell.com to download the correct firmware update. If its one you had installed after you bought the PC, then goto the NEC site for the update www.NEC.com

Plz help me--error connecting to MySQL server

While trying to connect to the MySQL server database,
SqlConn = DriverManager.getConnection("jdbc:mysql://" + "database_server_addr/database_name?user=kiosk&password=!xyzabc");
I get the following error.
Error while connecting to mysql
Communication link failure: null
Notice the ! symbol(exclamation mark) present in the connection string above for the password value i.e., !xyzabc
Is the problem with the ! symbol in my password, coz I am able to connect
if I changed my password omitting the ! symbol. But I would like to connect with the ! symbol in the password. Any quick help is appreciated.
Thanks,
Bussa.
[email protected]

specify the database Server address, you can't do it with the "HTTP URL"
String url = "jdbc:mysql://xxx.xxx.xxx.xxx";
Class.forName("mySql spec");
Connection con = DriverManager.getConnection(url,"user", "pass");

Urgent plz help me.error fixing--full marks given

Hi..this is regarding error fixing for prgm below in ecc 6.0
*& Report ZCLEAREM
REPORT ZCLEAREM.
TABLES: LFA1, LFB1, BSIK.
PARAMETERS: CLRDATE LIKE BSIK-AUGDT.
SELECT-OPTIONS: ALLOCATE FOR BSIK-ZUONR,
                 CLIENT   FOR BSIK-MANDT.
DATA: BEGIN OF CLEARING OCCURS 3000,
       LIFNR LIKE BSIK-LIFNR,
       BUKRS LIKE BSIK-BUKRS,
       BUDAT LIKE BSIK-BUDAT,
       ZUONR LIKE BSIK-ZUONR.
DATA: END OF CLEARING.
DATA: SESSION(12) VALUE 'CLEARVENDORS'.
DATA: BEGIN OF BDC_TAB OCCURS 10.
        INCLUDE STRUCTURE BDCDATA.
DATA: END OF BDC_TAB.
DATA: FROM_DATE(10), TO_DATE(10), COMPANY_CODE LIKE KOST1-BUKRS.
DATA: CTR(4) TYPE N VALUE 0, HOLD_LIFNR LIKE BSIK-LIFNR.
DATA: HOLD_BUKRS LIKE BSIK-BUKRS.
CALL FUNCTION 'BDC_OPEN_GROUP'
     EXPORTING
          CLIENT   = SY-MANDT
          GROUP    = SESSION
          HOLDDATE = '07/01/96'
          USER     = SY-UNAME
          KEEP     = 'X'.
CONCATENATE: CLRDATE4(2) '/' CLRDATE6(2) '/'
CLRDATE+0(4) INTO FROM_DATE.
WRITE : / 'CLEARING DATE USED IS ', CLRDATE.
START-OF-SELECTION.
GET BSIK LATE.
CHECK CLIENT.
CHECK ALLOCATE.
IF ( BSIK-QSSHB GT 0 ) AND ( BSIK-AUGBL EQ '          ' ).
    MOVE-CORRESPONDING BSIK TO CLEARING.
    APPEND CLEARING.
ENDIF.
END-OF-SELECTION.
WRITE : / 'SELECTED ', CTR, ' RECORDS FOR CLEARING...'.
SORT CLEARING BY LIFNR BUKRS BUDAT.
DELETE ADJACENT DUPLICATES FROM CLEARING COMPARING LIFNR BUKRS.
LOOP AT CLEARING.
    WRITE : / CLEARING-LIFNR, ' ', CLEARING-BUKRS, ' CLEARED. '.
    PERFORM GENERATE_BDC_DATA.
    CTR = CTR + 1.
    CALL FUNCTION 'BDC_INSERT'
         EXPORTING
              TCODE     = 'F-44'
         TABLES
              DYNPROTAB = BDC_TAB.
ENDLOOP.
CALL FUNCTION 'BDC_CLOSE_GROUP'.
WRITE: /'end of generation of bdc session - ', SESSION, SY-MANDT,
         SY-UNAME, SY-UZEIT.
WRITE: / 'WILL CLEAR A TOTAL OF ', CTR, ' RECORDS.'.
      FORM GENERATE_BDC_DATA                                        *
FORM GENERATE_BDC_DATA.
REFRESH BDC_TAB.
PERFORM DYNPRO USING:
       'X' 'SAPMF05A' '0131',
       '' 'RF05A-AGKON' CLEARING-LIFNR,
       '' 'BKPF-BUKRS' CLEARING-BUKRS,
       '' 'BKPF-BUDAT' FROM_DATE,
       '' 'RF05A-XPOS1(2)' 'X',
       '' 'BDC_OKCODE' '/16',
       'X' 'SAPMF05A' '0731',
       '' 'RF05A-SEL01(1)' CLEARING-ZUONR,
       '' 'BDC_OKCODE' '/16',
LOOP AT
       'X' 'SAPDF05X' '1102',
       '' 'BDC_OKCODE' 'BU'.
ENDFORM.
      FORM DYNPRO                                                   *
--> DYNBEGIN                                                      *
--> NAME                                                          *
--> VALUE                                                         *
FORM DYNPRO USING DYNBEGIN NAME VALUE.
IF DYNBEGIN = 'X'.
    CLEAR BDC_TAB.
    MOVE: NAME TO BDC_TAB-PROGRAM,
    VALUE TO BDC_TAB-DYNPRO,
    'X' TO BDC_TAB-DYNBEGIN.
    APPEND BDC_TAB.
ELSE.
    CLEAR BDC_TAB.
    MOVE: NAME TO BDC_TAB-FNAM,
        VALUE TO BDC_TAB-FVAL.
    APPEND BDC_TAB.
ENDIF.
ENDFORM.

In abap editor menu path
Goto-->Attributes
here in Logical Database name define KDF.
It will work.
regards
shiba dutta

Plz help , getting error in my java code

Can any one tell the reason for this error:
Exception in thread "main" java.lang.OutOfMemoryError: Java heap space
is there any size limit for java classes that I am using in my code?
My code Looks like:
     FileChannel in = null, out = null;
     try {
     in = new FileInputStream(sourceLocation).getChannel();
System.out.println(in.size() +"RptPageBreak rtn: b 4 read file into buffer, source=" + sourceLocation);
// read the file into buffer
// System.out.println("-1 " +in.size() );
MappedByteBuffer buf = in.map(FileChannel.MapMode.READ_ONLY, 0, in.size());
     //System.out.println("RptPageBreak rtn: AFTER read file into buffer" );
System.out.println("1: "+ buf.capacity()+" " +in.size() );
// CharBuffer cb;
               try {
                    cb = Charset.forName ("UTF-8").decode (buf);
               } catch (Exception ex) {
                    System.out.println("2:"+ ex.getMessage());
                    ex.printStackTrace();
System.out.println("2");
String lines[] = Pattern.compile ("\n").split (cb, 0);
     //System.out.println("RptPageBreak rtn: lines.len=" + lines.length);
     Writer writer = new FileWriter (targetLocation);
     System.out.println("3");
     for (int i = 0, n = lines.length; i < n; i++) {
          // also compare if starts with a CRLF
     if ( ( lines.startsWith("\r\n" + rpt_headg_id) == true ) ||
               ( lines[i].startsWith("\f" + rpt_headg_id) == true ) ||
( lines[i].startsWith(rpt_headg_id) == true ) )
//if ( lines[i].contains(rpt_headg_id) == true )
     //System.out.println("RptPageBreak rtn: found headg in if loop " + rpt_headg_id );
writer.write ("1");
else {
     writer.write (" "); // detail lines shift over 1 by addg a space
writer.write (lines[i]);
writer.write ('\n');
//System.out.println("RptPageBreak rtn: lines[i]=" + i + ' ' + lines[i]);
writer.close ();
}catch(Exception e)
     System.out.println("RptPageBreak rtn: Catch Exception: " + e.getMessage() );
     status=false;
e.printStackTrace();
finally {
     try {
if (in != null) in.close();
if (out != null) out.close();
status=true;
catch(Exception e)
     System.out.println("RptPageBreak rtn: Finally-Catch Exception: " + e.getMessage() );
     status=false;
e.printStackTrace();

It has nothing to do with classes. It is that you are reading to much info into memory at one time. If you are only going to cycle through the input line for line, anyway, then why don't you simply read the file (or whatever) a line at a time and process it as you read it, rather than loading the entire thing at once?

Plz help me: Error msg when installing SAP netweaver

Hello,
I am trying to install NetWeaver on my local system. I am not able to proceed further to install SAP NetWeaver 2004's.
When ever I am running SAPinst.exe file I am getting a prompt that says "Network input/output exception has occurred: Connection reset java.net.SocketException: Connection reset" and then it will ask for host and port number. I entered the local host name and port number as 21212. then I am getting a msg saying "Could not connect to host [HOST NAME] on port 21212. java.net.ConnectException: Connection refused: connect"
I installed all required JAVA components like Java Runtime Environment, Java SDK and JAVA JDK. I verified all environmental variables. I created a new connection with MS loopback adaptor. I disabled all other network cards available on my system. I entered required info in HOST file and SYSTEM file in %windows/system32/drivers/etc% folder.
After trying 2 - 3 times I tried to change the port number as mentioned in installation guide also ( using sapinst.exe SAPINST_DIALOG_PORT=<free_port_number_sapinst_gui_to_gui_server> GUISERVER_DIALOG_PORT=<free_port_number_gui_server_to_sapinst_gui> command in command line) . But no Luck.
Can any one help me, what else shall I do to proceed further. Thanks in advance.
Regards,
Farooq.

There is an option when starting the sapinst program to avoid starting up an installation GUI and instead wait for a connection from a remote installation console. I believe it is:
./sapinst -nogui (or something very similar, check the installation guide)
The server will now wait for a response from your terminal. Use the remote installation program and enter the port number of the server. If you just run the sapinst program without the nogui flag you may run into some issues. And make sure your versions match up. I have run into an issue before where I didn't realize I was using a verion of the remote installation program that didn't match up with sapinst server program.
Message was edited by:
Harrison Holland

PLZ HELP RFC ERROR

Hi,
We unable to create EWA report from.we are having problem with RFC connection SDCC_OSS (Automatically generated Destination to SAP)
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=17 thRc=223
CPIC program connection ended (read error)
ABAP Programm: RSRFCPIN (Transaction: SM59)
Called function module: RFC_PING
User: ***** (Client: 500)
Destination: SDCC_OSS (handle: 2, , {4E721E62-D7D0-007E-E100-80000A3C019A})
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2323
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=17 thRc=223
CPIC program connection ended (read error)
HOST =/H/192.*.3.50/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001
SERV =sapdp00
>>>> [2] SDCC_OSS : R/3 <ac: 3> K /H/192.*.3.50/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001 >>> CLOSE abrfcfun.c 679 ( )
-{4E721E62-D7D0-007E-E100-80000A3C019A}
==== Delta HO 2, 1 detaching (head)
==== Delta HO 0, 0 LOG DROPPED

User: ***** (Client: 500)
It seems someone have changed the logon details, it should be like client 001 and with valid user name and password.
Search for the RFC details on SMP and SDN.
Regards,
Nick Loy

Error while opening a module. plz help me, very urgent.

when i try to open a module, the following error message appears on my screen.
          " no j2ee component found in d:\krisp\programs\servlets".
          i've installed bea in c: drive and my servlet program is in d: drive.
          plz help me, it's very urgent.

Can you provide some more information? What were you doing when this happened?
          Can you post the entire error message?
          -- Rob
          WLS Blog http://dev2dev.bea.com/blog/rwoollen/

I restored my Macbook Pro and now I can't log in as Admin - it says there is an error with FileVault and I don't have access - plz help! thank you.

I had to restore my Macbook Pro from Time Capsule yesterday and now when I go to log in as my usual Admin, it says there is a FileVault error and my access is denied. I created another temporary Admin acct, but everything I had on my desktop, etc is "gone" I can look up the "drive' or wahtever it's called, but I can't access any of it. All I want to do is log back in as my usual self (the regular Admin) - plz help! Thanks. p.s. I"m (obviously) not that computer savvy!

Triple-click the line below to select it:
/System/Library/CoreServices/Directory Utility.app
Rght-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu.* The application Directory Utility will open.
In the Directory Utility window, click the lock icon and authenticate. Select the Directory Editor tool in the toolbar. Select Users from the Viewing menu in the toolbar, if not already selected. Select the affected user account in the list. On the right is a list of properties and values. Select the property "HomeDirectory" and delete it by clicking the minus-sign icon directly below the property list. There are two such icons in the window. You want the one on the right, not the one on the left.
CAUTION: Do not click the minus-sign icon on the left, below the user list.
Then click the Save button in the lower right corner of the window. Quit Directory Utility.
CAUTION: There is no "undo" in Directory Utility. If you make a mistake and delete something in the Directory Editor that should not have been deleted, restore your whole system from a backup and start over. I have no other help to offer in that case.
Try again to log in as the affected user. If you can log in, you should find a file in the home folder with the name of the user and the filename extension "sparseimage" or "sparsebundle". Double-click that file. A disk image should open. Copy your files from that disk image to restore them.
I strongly suggest that you deactivate legacy FileVault in the Security & Privacy preference pane, then log out and log back in. Consider activating FileVault 2 if you want that kind of security.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

Error in variables,plz help me

I created a variable del_var.The sql query assosiated with this variable is.
Delete from schema.file_name_table where rownum=1;
After refreshing it.it is deleting first row in the table.But it is resulting in an error
"17003 : null : java.sql.SQLException: Invalid column index java.sql.SQLException: Invalid column index "
Plz help me

Hi,
You can't use a 'Delete" command at a refreshing variable because at a refresch the variable need to receive a value back and the delete doesn't return value.
Change the command to "select....."
Does it make sense to you?

Had 1418 error.formatted as fat.not fat32.now ipod doesnt work.why?plz help

The iTunes keeps saying that:
"The iPod "IPOD" cannot be updated. The disk could not be read or written to"
"The iPod "IPOD" cannot be updated.
And when I tried to restore it.
"The iPod "IPOD" could not be restored. An unknown error occurred (1418)"
thats a dreaded problem and i researched at many forums on how to solve it.....
before reading ur reply....there were some other replies that i read.....
which told me to format my ipod into fat partition...and not fat32 partition....then we had to update it and then restoring it would be possible........
that was the only article which i came across and which had a solution to 1418 problem......
so i began my work....
but as soon as i formatted my ipod shuffle second generation into fat partition.......
i restarted my comp...and then.the ipod is no longer working.......
if i push it to on......then there is a constant green light on it which does not go off even if i connect it to comp. using the dock provided.......
if i put it off,the green light goes off....
ideally when an ipod shuffle is connected to pc..there is an orange light that starts blinking ,that shows that the ipod is being charged.
but now when i connect mine.....
the green light blinks only once......and then nothing happens...
the device isnt working and so i cant even solve my 1418 problem ,as now i even have the solution.......
help me plz....
its really urgent....
its been just a month my uncle gifted me this ipod ...he stays in north carolina........and i stay in india.....
i dont even know if there are service centres of apple available in mumbai.and if they are,whether they are trust worthy or the ipod that i send to them might never to me and get stolen or something.....somebody might just keep it and say that its lost.......mumbai is not trustworthy.
but if there is a recognized apple service centre then i would want to go there and get my ipod repaired....i have one-year warranty with me.......but i dont know if the warranty of a product bought in north carolina works in india......
i cant throw this ipod....cause its my first ipod and it has hardly been time that i got it...its too early for me to throw it.....
i dont know why the ****.....cant i connect it to the comp...
i tried the following: after getting 1418 read and write error...:
reinstalled the itunes 7.0.2
reinstalled the drivers......
reset the ipod shuffle...
restarted my computer several times.....
checked the cable....
plugged the usb cable onto another port...
scanned the comp for viruses......
now the only thing left is that i think.....there can be a problem with the jack where the dock is plugged.....
maybe thats the reason my ipod isnt working...
even if i formatted into fat partition rather than fat32 partition,it should atleast be connected......
should atleast charge.....
should atleast be detected......
my ipod is not even getting detected by the comp as any unknown device also.....forget as an ipod....
i just shouldnt have formatted it...
although i think....that formatting it did not lead to this problem......
please help me.......
urgently...........
plz.....
plz......send ur reply fast..plz help me.........
get this ipod to work......
i will fix the 1418 error myself....
just get this device to work....so that comp starts detecting that i have connected something thru usb.....

On top of the two suggestions already given, make sure that the drive letter being assigned to the ipod when you plug it in in windows is not also a drive letter being assigned to another drive. I've heard that this happens occasionally and can cause all kinds of conflicts, from problems you are describing to lockups when trying to sync.
I would also try it on a different computer to see if that helps. Maybe you've got a friend or a computer at work that you can install itunes on and give it a shot there. This will let you know whether it's a problem with your specific computer or if it's a problem with the ipod.
The fact that it runs in Windows and you were able to reformat the flash memory stick tells me that the Ipod is working, but that something on your computer is not.
P.S. Obviously you've had it for 90 days, So I must assume that the USB port is working correctly. Otherwise the Ipod's battery would have drained by now. So I don't believe it is a hardware issue. So move past that for right now and look to your computer's settings for the answer.

Error 1430 occurred at Open/Create/Replace File in NI_Fuzzy_Logic_API.lvlib:FL Load Fuzzy System.vi- Untitled 3 Possible reason(s): LabVIEW: The path is empty or relative. You must use an absolute path. Not A Path how can i copy it in new vi plz help

when i am copy the vi that is in find example>fuzzy>fuzzyEx with pi control the follwing error occuring
'error 1430 occured at open/create/replacefile in NI Fuzzy logic API.LVLIB FL LOAD FUZZY SYTEM.vi
untitel 3 possible reason the pat is empty or relative you must se use an absolute patth <not apath>
plz help me i only want that i can copy this vi in new vi but when i do so the above error occur and fuzzy logic cotroller is highlited

Hello Nofil,
This is probably happening because you have made a copy of the VI without changing the name/ location on the disc. I have saved a copy of the VI for you, it is in LabVIEW 2010 SP1, please ask if you want this in a previous version.
Regards
Andrew George @ NI UK
Attachments:
Fuzzy Tanks with PI.vi ‏31 KB

500 internal server error..plz help

hi,
since i started working on oracle apps...this forum has proved itself alt helpful...
i have performed a single node installation successfully over my laptop on win xp sp2 os.
alt of error generated bt in da end i always found a solution here...
guys like hsawwan are a great asset for this forum.....
may GOD reward u guys fr da job u r doing by helping others....
my recent problem has left me in a fix....
problem:
after a successful installation my system was working very fine ... i used the application and every thng seemed to work ok...
bt thren i restarted my pc nd this chaos started ....
first m receiving
500 internal server error...
thn a blank screen
now again 500 internal server error...
steps i performed
1-restarted db listener
2-Disabled Distributed JVM Cache by changing "LONG_RUNNING_JVM=" from "true" to "false" in the oc4j.properties.
reference =metalink Doc ID: 761869.1
plz help me get rid of this error.....
m nt an xpert .m a newbie.. so if u xplain in plain simple word i'l b grateful....
thanx thanx thanx in advance ....

HI
Sorry for late response ...
actually i performed the installation of 12R ON MY LAPTOP...
SORRY for posting it in 11I INSTALLATION issues...
my problem was solved by this action plan...
i am writing it here for some future reference ...
open a new shell and set your apps environment
then goto following directory -------->>> cd $ADMIN_SCRIPTS_HOME
stop this service ---->>> adopmnctl.sh stop
make a check if it is really down--------->>> ps -ef | grep <USER> grep opm (optional)
delete the following:
rm -fr $INST_TOP/ora/10.1.3/j2ee/oacore/persistence/* (optional but it would be better if u perform it)
rm -fr $INST_TOP/ora/10.1.3/j2ee/oafm/persistence/*
rm -fr $INST_TOP/ora/10.1.3/j2ee/forms/persistence/*
again start the services ------>>> adopmnctl.sh start
restart your machine ....
this solution worked for my pc ...
note ** solution may differ for different users ....
thanks a lot helios and hsawwan for ur support .... :)

How to fix itunes error 1611 while restoring ios 4.3.2 , and when i restore to 4.2.1 the can be ok.plz help me

how to fix itunes error 1611 while restoring ios 4.3.2 , and when i restore to 4.2.1 the can be ok.plz help me

have a look at this support article.

Error while trying to synchronize Audio and MIDI. plz help i cant hear anything

plz help me i cant hear nothing and its says: Error while trying to synchronize Audio and MIDI.
Sample Rate 38536 recognized.
Check conflict between Logic Pro X and external device. ???????? PLZ HELP

It means you are overtaxing the CPU, likely with just one (3rd party-)software instrument plugin. Ignore the word "external", in this context it often means "3rd party plugin".
So what synth is it? Since you're Dutch, it's probably one of the trancy dancy synths, such as Albino, Diva, Sylenth or Massive... I could be wrong though...
The best way to avoid this message is to Freeze the track with the guilty synner - however, a frozen track cannot be edited, so if that is a problem, you will have to make the synth itself run lighter, which can be achieved by turning of internal effects that are ON the synth itself, especially reverb.
http://help.apple.com/logicpro/mac/10/#lgcpf1cbfd51

PLZ help me error 4280

Similar Messages

Maybe you are looking for