Plz help me (important)
I bought (half a year ago) a MSI KT4 Ultra mainboard - well first time i turned on Computer anything was good, i could see the CPU temperature, MB temperature and all the other things that are in the BIOS under 'PC Health Status' - but then i set FSB to 133 Mhz cause of my AMD XP 2100+ and since then i have the same problem: CPU FAN ISNT RUNNING - (it is) - and i cant see the temperature of the CPU of the mainboard or any power supply things. - Can you maybe tell me is wrong with my mainboard? ;(
i wanna overclock my Cpu and without seeing a temperature this is a bit too dangerous 4 me... ;(
Hope sombody can help me...
Thanx for help!
erm yes CPU fan detection is OFF and the will stay off cause i have a cordless USB keyboard - and that doesnt work under BIOS. I checked everything in bios, all is okay. and how the fu*k can all temperatur sensors be damaged? i cant even see the +5, -5, +12, -12 volt degrees...
ah btw @ ZachM i tried it with CPu fan blabla on and it didnt work :/
*grr* ;(
Similar Messages
-
hi i am interested in how to buy an app in app store if i dont have us credit card. when i try to buy an app it says to fill in billing information and when i fill my card specs. it says that its incorrect. so what can i do to buy an app? plz help really important cant buy anything : (
p.s. sorry for bad englishIf you are not in the US with a US billing address and payment method then you can't buy items from the US store - you need to be in a country to use its store.
Does your credit card work with your own country's store ? For it have a chance of being accepted the credit card then needs to be registered to exactly the same name and address (including format and spacing etc) that you have on your iTunes account, and to have been issued by a bank in the country where you and your iTunes account are.
What's the actual error message that you are getting ? -
Plz Help With This Important Decision
I really need help deciding if i should run bootcamp or not. i have 33 gb left on my hd(i only started w/55.5 after formatting). i just cant decide. plz help!!!
Remember also, you want to keep about 15% of your drive free, so virtual memory will work efficiently.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
ITMS: MacOSG Podcast
An Apple User Group -
okay so i bought the new ipod video 30 gig, like a few days ago. i just bought two episodes of Lost from season 2, the first two episodes of the season. they play fine on my computer on itunes, they wont play on my ipod. this is what happens: i click on the episode, it pauses for 3 seconds and than a blue/purple screen comes up for like 6 seconds and than it goes back tothe menu with the two episodes.
i also bought the new CD from Anti-Flag today as well from itunes, they play fine on itunes but on my ipod it skips from song to next song without playing it but when i plug it in my computer it says it played X number of times.
plz help me.And no purchased content works?
Try this...
Part 1:
1. Navigate to \iPod_Control\iTunes on the iPod in Windows Explorer. You may have to turn on Show Hidden Files and folders. To do this, go to Tools-->Folder Options, click the view tab, click the bubble to show hidden files and folders, click Apply, and click OK. Look for the presence there of a file named iEKInfo. Is it there? If so, make a copy of this onto your computer somewhere. While there, make a copy of iTunesDB also. Don't delete these copies.
2. Create a new, administrator user in Windows . (Start-->control panel-->user accounts-->create a new account)
3. Log out of the current user.
4. Log into the new user.
5. Restore the iPod as documented in this article:
http://docs.info.apple.com/article.html?artnum=60983.
6. Open iTunes.
7. Set the Music sync preference in iTunes for the iPod to Manual mode.
8. Download the free single of the week from the iTunes Music Store.
9. Verify that the song plays in iTunes.
10. Drag only this song to the iPod.
11. Eject the iPod from iTunes.
12. Disconnect the iPod from the computer.
Does the song play?
If the iPod is able to play this song, follow these steps:
Part 2:
1. Log out of the new user.
2. Log back into the original (affected) user.
3. Reconnect the iPod to the computer.
4. Drag some of the older purchased content (that would not play before) to the iPod.
5. Eject the iPod from iTunes.
6. Disconnect the iPod from the computer.
Does the affected content play?
Is the iPod still having the same issue? Try these possible solutions:
Part 3:
* Delete the SC Info.sidb file as documented in http://docs.info.apple.com/article.html?artnum=302386.
* If the issue persists, recreate the iTunes Music Library as described in http://docs.info.apple.com/article.html?artnum=93313.
Does the music play?
Please post back if this works or not.
btabz -
Sdk1.4.1_01 installation, very important plz plz help
ok I just spent a freakin hour and a half downloading this, and now it says we recommend you do not install this software, the reason is your operating system does not have service pack 2, continue anyway? should I continue? if not, which latest SDK should I download that supports my computer? I just wiped out sdk1.3.1_04, it worked fine until it never compiled anything, which was recent, so I decided to get rid of it and install the new one. should I continue? plz this is important. thx in advance
thx for trying, but I can't download now parents aren't here (I cna't wait till I buy my laptop, this computer would be accepted at a musuem for ancient display) I'll just stick with SDK1.3.1_04 for now, then buy the laptop. does the tutorial need SDK1.4.1_01??? hopefully not, thx for trying anyway
-
Plz help using ms access as database,i want to create a login page in java
hye frnz... plz help me m new to java
m using ms access as database and try to create a login page where user type username and pw
i had enter valid user entries in database i checked connectivity is working i want as user login the main window must open after checking username and pw field to database but
now there is an error class not found exception sun:jdbc...... error
plz help me i had stuck frm 4 days */
import java.sql.DriverManager;
import java.sql.Connection;
import java.sql.Statement;
import java.sql.ResultSet;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
class Login extends JFrame
//Component Declarations
JLabel jlb1,jlb2;
JTextField jtf1;
JPasswordField jpf1;
JButton jb1,jb2;
//Constructor
Login()
//frame settings
setTitle("Login Dialog");
setLayout(new GridBagLayout());
GridBagConstraints gbc = new GridBagConstraints();
setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
Dimension d= Toolkit.getDefaultToolkit().getScreenSize();
setBounds(d.width/2-175,d.height/2-100,350,200);
gbc.insets=new Insets(7,7,7,7);
//adding components
jlb1=new JLabel("User ID");
gbc.gridx=0;
gbc.gridy=0;
add(jlb1,gbc);
jlb2=new JLabel("Password");
gbc.gridx=0;
gbc.gridy=1;
add(jlb2,gbc);
jtf1=new JTextField(10);
gbc.gridx=1;
gbc.gridy=0;
add(jtf1,gbc);
jpf1=new JPasswordField(10);
gbc.gridx=1;
gbc.gridy=1;
add(jpf1,gbc);
jb1=new JButton("Login");
gbc.gridx=0;
gbc.gridy=2;
add(jb1,gbc);
jb1.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent ae)
Connection conn=null;
Statement stmt=null;
boolean found=false;
try
Class.forName("sun.jdbc.driver.JdbcOdbcDriver");
String dataSourceName = "Inventory";
String dbURL = "jdbc:odbc:" + dataSourceName;
conn=DriverManager.getConnection(dbURL, "","");
stmt=conn.createStatement();
ResultSet rst=stmt.executeQuery("Select * from User");
System.out.println(jtf1.getText()+"/t"+jpf1.getPassword());
while(rst.next())
System.out.println( rst.getString(1) +"/t"+ rst.getString(2));
if(jtf1.getText().equals(rst.getString(1).trim()) && new String(jpf1.getPassword()).equals(rst.getString(2).trim()))
found=true;
rst.close();
dispose();
MainWindow mw= new MainWindow(); /*created min window object created to be opend after login but not working*/
break;
rst.close();
stmt.close();
conn.close();
catch(ClassNotFoundException e){System.out.print(e);}
catch(Exception e){System.out.print(e);}
if(found==false) /*this portion is executing and dialog box appears invalid name and pw with class not found exception sun:jdbc.......on console */
JOptionPane.showMessageDialog(null,"Invalid username or password",
"Error Message",JOptionPane.ERROR_MESSAGE);
jb2=new JButton("Clear");
gbc.gridx=1;
gbc.gridy=2;
add(jb2,gbc);
jb2.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent ae)
jtf1.setText("");
jpf1.setText("");
jtf1.requestFocus();
setSize(350,200);
setVisible(true);
jtf1.requestFocus();
public static void main(String args[])
Login l=new Login();
Edited by: 795772 on Sep 19, 2010 4:44 AM795772 wrote:
hye frnz... plz help me m new to java
m using ms access as database and try to create a login page where user type username and pw
i had enter valid user entries in database i checked connectivity is working i want as user login the main window must open after checking username and pw field to database but
now there is an error class not found exception sun:jdbc...... error
plz help me i had stuck frm 4 days */
<snip>The subject of this forum is Oracle databases. How does your problem relate to that subject?
Two bits of advice:
1) Make sure you ask questions in a forum related to your problem.
2) If you want to be taken seriously as a professional, drop the MS IM Speak and use the language of the forum. In this forum it is English, which is successfully used by many people for whom English is far from their native language. -
Plz. help,table does not show value for one field
hi all,
i have a really strange problem , i have a string field in access database that contains the date and time value,this field for some strange reason does not show in my table created through html,
i tried all combination(arranging the fields) ,renaming it w/o help, it shows the value using out.println(but then why is it not showing me in the table???)
plz. help ASAP.
the code is as under
<HTML>
<HEAD><TITLE> LOGGED IN ok</TITLE> </HEAD>
<BODY bgcolor = "yellow">
<%@ page import = "java.sql.*" %>
<%! // declaring variables
String s = "";
java.sql.ResultSet rs=null,rs1=null,rs2=null;
java.sql.Connection con;
java.sql.Statement stmt,stmt1;
String empId = "",compid ="",calltype ="",probheader="",probdescription ="",probcomment ="",priority ="",a="";
%>
Following are the pending complaints ..
<TABLE BORDER=1 CELLSPACING=0 CELLPADDING=0 width="100%">
<TR>
<TD> ComplainD </TD>
<TD> ComplainId </TD>
<TD> ProbHeader </TD>
<!--
<TD> ProblemDescription </TD>
<TD> Problem Comments </TD>
-->
</TR>
<%
try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
java.sql.Connection con = java.sql.DriverManager.getConnection("jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};" +"DBQ=c:/vishal/HelpDesk.mdb;DriverID=22;READONLY=false","","");
//java.sql.Connection con = java.sql.DriverManager.getConnection("jdbc:odbc:Portal");
java.sql.Statement stmt = con.createStatement(java.sql.ResultSet.TYPE_SCROLL_INSENSITIVE,java.sql.ResultSet.CONCUR_READ_ONLY);
s = "select * from Complains";
java.sql.ResultSet rs = stmt.executeQuery(s);
while(rs.next())
//getting data from database
empId = rs.getString("EmpId"); // out.print(" " + empId);
compid = rs.getString("ComplainId");
// out.print(" " + compid);
calltype = rs.getString("CallType");
// out.print(" " + calltype);
a = rs.getString("Complaindate"); //problem with this field
out.print(a); // prints value
%>
<TR>
<TD> <%=compid %> </TD>
<TD> <%=calltype %> </TD>
<TD <%=a %> </TD>
</TR>
<%
}//while loop
%>
</TABLE>
<%
}//try
catch(Exception ep)
out.println(ep);
System.exit(1);
%>
</BODY>
</HTML>
value in database is as follows :-
Complaindate
5/18/2003 1:30:27 PM
5/18/2003 7:32:43 PM
5/18/2003 7:34:02 PM
5/18/2003 7:49:19 PM
5/18/2003 7:50:27 PM
5/18/2003 10:49:42 PM
5/18/2003 10:58:24 PM
thanking u ,plz ask if any further clarificationsHi
I am seeing nothing wrong with ur code..
what about "view source" result.....plz check with that...
whether u r getting all the trs and tds...
revert back on this Issue..
Mars Amutha -
Urgent plz help me......plz
Am very nem to jsp.
am doing my final year project in jsp.
I want to retreive value in the textbox depending on the selectino made in the dropdown.
in the dropdown menu i retrieve employee id frm backend. n in the textbox i shuld get employee name depending on the selection made in the dropdown list. that is data in the textbox shuld change depending on the selectin made in dropdown.
here is my code which i tired but in the textbox the value is alwys remaning the last record value n it is not changing depending on slectino made in dropdwon list
<%@ page import="java.util.*" %>
<%@ page language="java" %>
<%@ page import="java.sql.*" %>
<HTML>
FAQ
Category choice
<FORM ACTION="selection.jsp" METHOD="POST">
<%
String nameselection = null;%>
<SELECT NAME="Category" id= Category >
<%
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection conn=DriverManager.getConnection("jdbc:odbc:man","scott","tiger");
Statement statement = conn.createStatement();
ResultSet rs = statement.executeQuery("SELECT DISTinCT empid FROM employee" );%>
<OPTION VALUE='nochoice'>Please choose a category</OPTION>";
<%while(rs.next()) {
nameselection = rs.getString("empid");%>
<OPTION value ="optcategory"><%out.println(nameselection);%>
</OPTION>
<% } %>
</SELECT>
Question selection
<%
String password = null;%>
<%ResultSet m1 = statement.executeQuery("SELECT * FROM employee WHERE empid = ( '" + nameselection + "')");
String mm1;
while(m1.next()){%>
<input type =text name=mm value="<%= m1.getString(2) %>">
<%}%>
</FORM>
</HTML>
plz help me....
am very new to it.
Thanx in advancehi manisha
good try & sorry for late reply
To say the truth i'm too new to jsp
i'll give u my code see it for reference.. if u have any doubts in that pls don't forget to ask me
function display()
var index=document.form1.drug.value;
document.form1.hid.value=index;
form1.submit();
function refresh()
var indexOfcombobox = document.form1.drughid.value;
sel = document.form1.drug;
for (i=0; i<sel.options.length; i++) {
if (sel.options.text ==indexOfcombobox ) {
sel.selectedIndex = i;
<form name="form1" method="post" action="">
<body onload="refresh() ">
<select name="drug" id="drug" value="hid" onChange="display()">
<option value="" selected> </option>
<%
while(rs.next())
%>
<OPTION VALUE="<%=rs.getString("DrugName")%>"><%=rs.getString("DrugName") %></OPTION>
<%
%>
</select>
<input type="hidden" name="hid">
</div></td>
</tr>
<tr>
<td>NDC code #</td>
<td>
<%
//query for selecting the values from the database
String sql1 = "SELECT ProductCode,DrugName,Dosageform from ProductMaster where DrugName='"+request.getParameter("hid")+"' ";
rs=stm.executeQuery(sql1);
%>
<% while (rs.next())
String val1=rs.getString("ProductCode");
String val2=rs.getString("DrugName");
String val3=rs.getString("Dosageform");
out.println (val1 +"</td>");
out.println ("<input type=hidden name=ndc value='" + val1 + "'>");
out.println ("<input type=hidden name=drughid value='" + val2 + "'>");
out.println("<td>Dosageform : "+val3);
}Regards
kalai -
Error while deployiong bpel process plz help
i am geting an error while deployiong bpel process plz help
BUILD FAILED
E:\jdevstudio10132\jdev\mywork\Application4\vinayread\build.xml:79: A problem occured while connecting to server "chdsez116553d" using port "8888": bpel_vinayread_1.0.jar failed to deploy. Exception message is: ORABPEL-05215
Error while loading process.
The process domain encountered the following errors while loading the process "vinayread" (revision "1.0"): BPEL validation failed.
BPEL source validation failed, the errors are:
[Error ORABPEL-10902]: compilation failed
[Description]: in "bpel.xml", XML parsing failed because "undefined part element.
In WSDL at "file:/D:/product/10.1.3.1/OracleAS_8/bpel/domains/default/tmp/.bpel_vinayread_1.0_679323b0585449e9fd1887e6ee2bf444.tmp/vinayred.wsdl", message part element "{http://TargetNamespace.com/vinayred}Root-Element" is not defined in any of the schemas.
Please make sure the spelling of the element QName is correct and the WSDL import is complete.
[Potential fix]: n/a.
If you have installed a patch to the server, please check that the bpelcClasspath domain property includes the patch classes.
at com.collaxa.cube.engine.deployment.CubeProcessHolder.bind(CubeProcessHolder.java:285)
at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:862)
at com.collaxa.cube.engine.deployment.DeploymentManager.deploySuitcase(DeploymentManager.java:728)
at com.collaxa.cube.ejb.impl.BPELDomainManagerBean.deploySuitcase(BPELDomainManagerBean.java:445)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
at com.evermind.server.ThreadState.runAs(ThreadState.java:646)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at DomainManagerBean_RemoteProxy_4bin6i8.deploySuitcase(Unknown Source)
at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:319)
at com.oracle.bpel.client.BPELDomainHandle.deployProcess(BPELDomainHandle.java:341)
at deployHttpClientProcess.jspService(_deployHttpClientProcess.java:376)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Total time: 1 second
plz give sme solutions<?xml version="1.0" encoding="UTF-8"?>
<definitions name="vinayread"
targetNamespace="http://xmlns.oracle.com/vinayread"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:client="http://xmlns.oracle.com/vinayread"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/">
<!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
TYPE DEFINITION - List of services participating in this BPEL process
The default output of the BPEL designer uses strings as input and
output to the BPEL Process. But you can define or import any XML
Schema type and use them as part of the message types.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -->
<types>
<schema xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://xmlns.oracle.com/vinayread" schemaLocation="vinayread.xsd" />
</schema>
</types>
<!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
MESSAGE TYPE DEFINITION - Definition of the message types used as
part of the port type defintions
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -->
<message name="vinayreadRequestMessage">
<part name="payload" element="client:vinayreadProcessRequest"/>
</message>
<message name="vinayreadResponseMessage">
<part name="payload" element="client:vinayreadProcessResponse"/>
</message>
<!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PORT TYPE DEFINITION - A port type groups a set of operations into
a logical service unit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -->
<!-- portType implemented by the vinayread BPEL process -->
<portType name="vinayread">
<operation name="process">
<input message="client:vinayreadRequestMessage" />
<output message="client:vinayreadResponseMessage"/>
</operation>
</portType>
<!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PARTNER LINK TYPE DEFINITION
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -->
<plnk:partnerLinkType name="vinayread">
<plnk:role name="vinayreadProvider">
<plnk:portType name="client:vinayread"/>
</plnk:role>
</plnk:partnerLinkType>
</definitions>
how to check the
which xsd contains
"{http://TargetNamespace.com/vinayred}Root-Element"????
how to check this plz tell me -
yesterday i tried updating to Ios 8. i new there were going to be some problems but i decided to do it. i started the update and less than a half hour into it my phone completely crashed.it went into recovery mode so i connected it to iTunes. i hit restore and update . it gave me and estimated time that kept going up. finally when it got to 800 hours it stopped and said an error occurred. i tried it again and the same error occurred. i am very disappointed in this because i greatly need my phone for school and other important things. i wasn't gonna wait that time anyway. i would like to know if there is anyway i don't have to update, get out of this screen without waiting forever, speed up the time, or get my computer to not crash when it gets to so many hours. (i have windows) plz help me out asap!!!
I have experienced a similar error with the iPhone 4S. The new version of iTunes will not let me restore the phone, it must be updated and nothing appears to be happening. Suffice it to say I am not amused. Apple needs to work this out - I had trouble updating to 8.0.2 as well.
-
Binary addition,subtraction and modulus...plz help urgent
plz help me on this query...
i need to pass two 512 bit number as string,then convert them to binary and
then perform binary addition,subtraction,modulus operations on those two numbers.finally convert result to integer.
i designed a code which doesnt work correct.it is:
* To change this template, choose Tools | Templates
* and open the template in the editor.
package bytearrayopeations;
import java.math.BigInteger;
* @author sheetalb
public class binaryadding {
public static void main(String[] args) {
BigInteger a = new BigInteger("123456");
BigInteger b = new BigInteger("5121");
String bb1 = a.toString(2);
String bb2 = b.toString(2);
String ss1 = null;
String ss2 = null;
String result = "";
String carry="0";
System.out.println("first value=" +bb1);
System.out.println("second value=" +bb2);
int k=bb1.length();
int h=bb2.length();
System.out.println("length 1="+ k);
System.out.println("length 2=" +h);
int p=h-k;
//System.out.println("difference=" +p);
int q=k-h;
//System.out.println("difference 2=" +q);
if(h==k)
else if(h>k)
for(int i=0;i<p;i++)
bb1="0"+bb1;
System.out.println("new value of first=" +bb1);
else if(h<k)
for(int i=0;i<q;i++)
bb2="0"+bb2;
System.out.println("new value of second=" +bb2);
StringBuffer sb1=new StringBuffer(bb1);
StringBuffer sb2=new StringBuffer(bb2);
bb1=sb1.reverse().toString();
bb2=sb2.reverse().toString();
//System.out.println("rev. buffer1=" +bb1);
//System.out.println("rev. buffer2=" +bb2);
for(int i=0;i<bb1.length();i++)
ss1=bb1.substring(i,i+1);
ss2=bb2.substring(i,i+1);
System.out.println("value1=" + ss1 + " " + "value2=" + ss2);
if (ss1.equals("0") && ss2.equals("0"))
if (carry.equals("0"))
result+="0";
else
result+="1";
else if (ss1.equals("1") && ss2.equals("1"))
if (carry.equals("0"))
result+="0";
carry="1";
else
result+="1";
carry="1";
else if (ss1.equals("0") && ss2.equals("1"))
if (carry.equals("0"))
result+="1";
carry="0";
else
result+="0";
carry="1";
else if (ss1.equals("1") && ss2.equals("0"))
if (carry.equals("0"))
result+="1";
carry="0";
else
result+="0";
carry="1";
System.out.println("sum=" +result + " " + "carry" + carry);
result+=carry;
StringBuffer sb3=new StringBuffer(result);
result=sb3.reverse().toString();
System.out.println("result is " +result);
System.out.println("Binary = "+ result + ", Decimal = "+Integer.parseInt(result,2));
}plz provide me or email me if possible java coding for all three operations as soon.
[email protected]One thread is enough. Continue here:[http://forums.sun.com/thread.jspa?threadID=5373720&messageID=10643157#10643157]
-
Plz help me solving following issues
Hi SD experts,
Plz help me solving following issues
1) What do you mean by POD(proof of delivery) what is the use of pod? What are the con figuration you done in your project?
2) When I am punching order after entering data like material No and quantity system should pop-up a screen of delivery date and status and invoice data and details, How can we configure this?
3) Client requirement is he want horizon period in days format. but standard sap system It's in months format(gray mode). how can we change months to days?
4) Quotation has been created for product-D, 10 quantities, sales order is created with reference to the quotation, system copies 10 quantities in sales order. How do you restrict in sales order end user should not change quantities, system should not allow for changes by en user?
5) when i creating the sales order the system show error "No customer master record exist for sold to party". How to rectify it?
suitable solutions will be rewarded
thansx & regardshi,
Proof of delivery (POD) is an instrument involved in business processes in which an invoice is issued only after the customer has confirmed the delivery's arrival. In addition to the proof of delivery itself, you can also record the POD date, POD time, the actual quantity that arrived and the reason for possible differences in quantities. This is especially important for deliveries where the delivery quantity varies because of the nature of the goods or for which the exact delivery quantity is unknown from the start.
You are now in a position to issue an accurate invoice based on the customer's confirmation of goods received. You no longer need to create credit memos. The reasons for deviation that occur most frequently in "real world" scenarios such as stock shrinkage, theft, certain characteristics of goods (volatility, for example), and transportation damage are recorded and analyzed in the system. This analysis is especially valuable when you are negotiating with forwarding agents, vendors, or customers, since all deviations can be reflected
With regards
Rajesh -
Plz help production issue(smartform)
hi experts plz help its a production issue
i have a box in my smartform in which in one line i can only show 50 characters .and i have a text of 70 characters but i only have to show 50 characters from 70 characters .
now wat i did i stored 70 characters variable into 50 char variable abd displaying it .
but the issue is
if i want to print .
hi this is sdn and here u can get all the information about sap .
now lets say
i of information is the 46th character of my line
now what is happening it is coming like
hi this is sdn and here u can get all the
infor
its showing 50 character only but if word is not completed it is printing it in next line.
it should print like
hi this is sdn and here u can get all the infor
plz help how to do it
thanx in advance .code i am using is ::::::::::::::::::::::::::::::::::::::::::::::::
data : TEXT_3I56(50) type c .
move is_bil_invoice-hd_gen-bil_number TO textname.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
id = '0002'
language = is_nast-spras
name = textname
object = 'VBBK'
ARCHIVE_HANDLE = 0
LOCAL_CAT = ' '
IMPORTING
HEADER =
tables
lines = t_lines_3156
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*describe table t_lines lines n.
*if not n is initial.
*bank_note = 'X'.
*endif.
READ TABLE T_LINES_3156 INDEX 1 .
IF SY-SUBRC = 0 .
TEXT_3I56 = T_LINES_3156-TDLINE .
ENDIF. -
import java.io.DataInputStream;
class CalculateAccnDist
public static void main(String args[])
DataInputStream in = new DataInputStream(System.in);
float a=0.0f;
float u=0.0f;
try
System.out.println("Enter the initial speed in m/sec :");
u = Float.valueOf(in.readLine()).floatValue();
System.out.println("Enter the acceleration of the body :");
a =Float.valueOf(in.readLine()).floatValue();
catch (Exception e) { }
System.out.println(" Time(s) Distance(m)");
for(int t=0;t<=60;t=t+10)
System.out.println(t + ((u*t) + ((a*t*t)/2)));
I am having two warnings, the warnings are :
Note: D:\j2sdk1.4.2_11\bin\CalculateAccnDist.java uses or overrides a deprecated API.
Note: Recompile with -deprecation for details.
whan I compile with -deprecation , I found the compiler is giving warning in the reading from keyboard statemant i.e. :
u = Float.valueOf(in.readLine()).floatValue();
a =Float.valueOf(in.readLine()).floatValue();
the error is pointed out at ==> in.readLine
for this warning i am also not able to run the program.
Plz help me out, I am a newbie in java.
Thank You
TirthankarFrom the API....
readLine()
Deprecated. This method does not properly convert bytes to characters. As of JDK 1.1, the preferred way to read lines of text is via the BufferedReader.readLine() method. Programs that use the DataInputStream class to read lines can be converted to use the BufferedReader class by replacing code of the form:
DataInputStream d = new DataInputStream(in);
with:
BufferedReader d
= new BufferedReader(new InputStreamReader(in));
USE BufferedReader INSTEAD OF DataInputStream -
PLZ HELP.. How can i make dvd from FCP project..
Can someone plz help..
I have FCPPRHD and DVD Pro..
I got lost trying to make a dvd out of fcp project
Can someone plz help in easy 123.. steps how to make a dvd for my client to view..
Thnx ever so much
awaitng ur replyI don't want to sound too harsh, but you really need to read the manual and do the tutorials.
You shoot, capture and edit in FCP. You export that to MPEG2 using compressor and you import the resulting video and audio files into DVDSP. You add a menu and set up buttons to get to the footage, and you set up navigation so that your client can get back to the menu at any time. You build and format that (i.e. burn the disc).
That's the process, but it is very much more detailed than any of us could write here.... it's all in the manual and tutorials
Maybe you are looking for
-
Firefox hangs at random times, even with all plugins disabled.
I get a white screen with the Windows circle that indicates Firefox is busy. On the bottome left, it says "waiting for XXX," where XXX is a hostname, usually some kind of ads server. Then it says Firefox stopped responding.
-
All the menus are coming up as capital A in a box and so are all the icons
All the Menus and icons are coming up as capital A with a square around them.The main tool bar is also this way which includes all the drop down menus. Need to fix soon. Please help me out on fixing this annoying issue, Thanks, Eric
-
Access privileges error on all documents
Dear Sir, i am facing error on all fill access denied. please help screen shot attached. thanks
-
Iterate Ove r Array In Soap RPC response
Hello, I'm new to JCAPS so forgive me if I'm missing something obvious. I need to interact with a remote web service that has a SOAP binding style of RPC. It returns an array whose items are a complex type. I am trying to call this from a business pr
-
Windows Server 2008 R2 - When svchost.exe memory-leaks Outlook does not load properly
Hi all, We have a server which runs Windows Server 2008 R2, fully updated, and acts as a Terminal Server (Citrix XenApp 6.5). In the past couple months we have had problems with svchost.exe leaking memory, growing to 2-3GB of RAM usage. Sometimes is