Plz help me some one

I have purchased my BlackBerry z10 six months back. 2nd day my mobile started giving trouble. Even i replaced my mobile. But still im facing same problems. I cant able to charge my mobile more than 80%. If my mobile battery reached 30% automatically it gets switch off. Again i cant able to.switch on it. Only after plugging the charger mobile is switching on. Now im started facing a new problem if i switch off wifi my mobile getting switch off.. i gave my mobile to your service centre for more than 3 times just they r updating software and giving back.. but the problems are not solved. Plz kindly help me.

Duplicate:
http://supportforums.blackberry.com/t5/BlackBerry-Z10/blackberry-Z10-problem/m-p/3031121#nobanner
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

G580 Smart Fan Noise PLZ Help me Any One...PLZZZZZZZZZZZZZZzz

PLZ help me. My lenovo g580 When power on ..Just hearing Noise . Its Smart fan Noise. Plz Help Me Bro...........

hi Arif664
Welcome to Lenovo Community Forums!
You may want to try a software Called speed fan, This gives control to your Fan and also shows Temperature readings.
Other Lenovo Motherboard have Restrictions for controlling the Fan. But give it a shot If it detected your fan then you're all set. adjust the Fan to your desired speed and fine tune it with the Temp that you're getting
If the Fan really get too Loud, beyond normal, I would still suggest to call Lenovo Technical Support for Assistance.
Best Regards
Solid Cruver.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

New to Solaris 9 - Need some help, if some one could answer my question plz

Hello!
During the installation when I set that the computer is not networked, everything (SMC) seems to work absolutely fine.
But when I set the option that the computer is networked, The SMC (Solaris management Console) doesn;t startup. it says again and again that the server couldn't be found. Although I tried to stop and again start the SMC server process, but it didn;t work.,
Please help me out !!!!

I had the same problem and I installed the system not networked and then configured the network.

PLz help i have one dought? IN ORACLE PL/SQL

1.write a block that accepts name and display it 5 times in output screen ?
(this my question i typed like in this SQL>screen but i'm getting out put ony once can u short out in this problem )
1 declare
2 name varchar2(15) :='&name';
3 n number(2) :=1;
4 begin
5 while n <=5
6 loop
7 dbms_output.put_line(name);
8 n :=n+1;
9 end loop;
10* end;
Enter value for name: dfhdfhfd
old 2: name varchar2(15) :='&name';
new 2: name varchar2(15) :='dfhdfhfd';
PL/SQL procedure successfully completed.
[CAN U TEL TEL ME HOW DO IT AND SEND ME THE CORRECT CODING THAT WOULD BE HELP FOR ME .I HAVE LAB WITH MY COURSE]
Regards
D.Muthu
Message was edited by:
user628154

Hi
You need to set serveroutput on.You will only get output once you would set it.You mentioned,you are getting one output.You didnt print it here.Where it is?
Three general thngs.
1)Please don't use caps while posting.I hope you know it,in internet chats,forums,it is considered as shouting.
2)Please read Pl/Sql guide from docs.These things are covered in details there.You can read it here.
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14261/toc.htm
3)Always mention your database and o/s version while posting.
Aman....

It is SAP-ABAP Topic Can u Help me some one.........

Hi,
I need some help in the PGP encryption / Decryption. We are getting a file from a third
Party vendor in the enrypted format. The encryption has been done using PGP.
We need to decrypt that file.
Q1 ) what is the Sun OS command for decryption ????
Q2) How can I give my private key in the ABAP code to decrypt it ????
Q3) How to know the Private Key that has been generated in the Unix Box for this third party ????
Regards,
sree
<b></b>

Hi,
I need some help in the PGP encryption / Decryption. We are getting a file from a third
Party vendor in the enrypted format. The encryption has been done using PGP.
We need to decrypt that file.
Q1 ) what is the Sun OS command for decryption ????
Q2) How can I give my private key in the ABAP code to decrypt it ????
Q3) How to know the Private Key that has been generated in the Unix Box for this third party ????
Regards,
sree
<b></b>

Plz help Me any one i am getting errors in Servlets

My OS is Windows 2000.I am using J2SDK1.4.0_02(in c:\J2SDK1.4.02_02\) and in order to run the SERVLETS I recently installed the J2SDKEE1.3.1 (in c:\J2SDKEE1.3.1). I updated the class path to c:\ J2SDKEE1.3.1\bin and c:\ J2SDKEE1.3.1\lib\jsdk.jar .Now I wrote a simple servlet program SimpleServlet.java and saved it in c:\MyPrograms.
Now when I compiled this program at prompt as follows
C:\MyPrograms\>javac SimpleServlet.java
I am getting the following errors
1)Package javax.servlet doesn�t exist
2)Package jaavx.servlet.http doesn�t exist
Can somebody please tell me where I went wrong. My guess is that the problem is with installing J2SDK. Somebody please let me out this problem.
Thanx!

Okay, you installed the Enterprise java sdk. I have never seen this jar before: "J2SDKEE1.3.1\lib\jsdk.jar". There should be the j2ee.jar in the same folder, this is what contains the Servlet API.
Next, when compiling your servlet include the classpath in your javac statement:
javac -classpath %CLASSPATH% SimpleServlet.javaWhen installing the J2EE SDK, you should have set up your J2EE_HOME and J2EE_LIBS env entries. Rather than just add the jar to your class path, use the J2EE_LIBS ref when compiling instead:
set J2EE_HOME=C:\J2SDKEE1.3.1
set J2EE_LIBS=%J2EE_HOME%\lib
javac -classpath %J2EE_LIBS%\j2ee.jar SimpleServlet.javaRather than call "set" each time add them to your System properties.
Cheers,
Anthony

Hello i m unable to restore my system preferences which is frozen plz help

m new mac user n at the start system preferences freezez i m unable to find soloution plz help if any one find it ...

See Here...
Unable to Update or Restore
http://support.apple.com/kb/HT1808

Can som one help me plz its about videos

ma ipod 5th generation wont play the videos that i purchase at itunes fo it i dont no why but hte scream remains blacc fo atleast 3 min can some one hook me up wit som help i tried lookin it up on hea in the ipod recommendations crap and questions asked but it dont say nothin bout it can sombody plz help me i would appreciate it alot than u.

iight okay well i bought the videos from itunes it should already be sent to my libary right, well i clicked so that it would up date ma ipod with the videos i dont got but when i did that and clicked the eject button for the ipod, and was going to wath the videos to see if they were in it was but wont play the scream would stay in black. so i reconnected my ipod and deleted them and put them bacc in its still the same way, by any chance do any body know cuz i wokr tomorrow wont be able to call the custumer services number.

I have lost my iphone 5 and after sometime I find it in my office but some one has lock it by Icoloud plz help me how to recover my phone

Dear Friends
I have lost my iphone 5 in my office and after sometime I find it in my office in my back drawer but some one has lock it by ICloud plz help me how to recover my phone U have all details of my phone.

The only way to locate/disable/erase any lost/stolen iPhone/iPod Touch is through Find My Phone or a similar app. However, this requires that Find My Phone be setup/activated, on your phone, before it was lost/stolen. You would then login at iCloud.com & try to locate it. This requires the phone be turned on & have an Internet connection. There is no other way to locate a lost/stolen iPhone. Apple can't/won't help you, nor will your carrier. Report the loss to the Police, your carrier & Insurance company. Change all of your passwords, especially your Apple ID/iCloud password NOW!
If your carrier offers Blacklisting & they Blacklist the phone, it will be unusable as a phone.
If locked with a passcode, and running iOS 7.0, then phone cannot be re-activated or the passcode removed without knowing your Apple iD/Password. It will be nothing but a useless paperweight.
If not running iOS 7.0, the phone can be forced into recovery mode & restored.

My iphone 4 was working good until IOS6 update, now I can't hear anything, my ear phone donot response ...Speaker are ok..if some one call me...they can hear me ...but I can't hear them.....please desperately need help...plz suggest...all reset is done...

My iphone 4 was working good until IOS6 update, now I can't hear anything, my ear phone donot response ...Speaker are ok..if some one call me...they can hear me ...but I can't hear them.....please desperately need help...plz suggest...all reset is done...except restore ...

Anyone? . . . :S

Hi plz some one help me :( i cant play any video in firefox,i see thumbnails but when i go to it said:an error occured plz try again later :( anyone know why?

i hadnt this problem since i reinstall my windows 7 because of some problems ,after i install firefox and real player,flash player ,... :) i wanted to see some clips on youtube but i cant , not also youtube also any sites :( i have a new version of flash player and... plz help me friend its so annoying :(

Check your plugins are uptodate!
*http://www.mozilla.org/en-US/plugincheck/
Type '''about:addons''' in URL and Goto Plugins
* Check all the plugins are "Always Active"
Somewhere on the page right click, go to view page info > permissions and make sure that adobe flash content is allowed to play on that domain.
Flash in Protected mode occurs issues too
*http://kb.mozillazine.org/Flash#Flash_Protected_Mode_issues_on_Windows_Vista_and_above
*http://forums.adobe.com/thread/1018071

Some one plz help me i've done everything i could think of PLZ HELP!!!!!!!!!!!!!!

Hey everyone last night my Zen touch froze up on me while i was listening to it so i hit the little restart botton and i thought everything was cool until i tried to do anything in recovery mode first i tried to do the clean up but nothing happened so i went down to format all and a sign popped up saying harddisk problem so i went to reload firmware and again the sign popped up saying harddisk problem so i went to reboot and that worked but it put me right back in to recovery mode and i just want to get out of recovery mode and listen to my music i have tried everything someone plz HELP ME!!!!!!!!!!!!!!!!!!!!!!!!

i just got it though like 2 weeks ago so why would it be dying
Hardware can be quite unpredictable at times. I ever bought a 20Gb hard disk and when I fix it on back at home, it just died. That is a case I never forget. Take back to shop and they do a on exchange. It is only for one day right out of the box fresh!!!! And sometimes the fault seem to be in that particular batch that is shipped in. So one got fault others all got the same fault.
For your case maybe it is the same? :smileytongue:

I am using iphone5 and when sending sms within 160 characters i am getting 2 sms counts deduction & i hear the message send sound twice. what is wrong here. can some one please help me here???

i am using iphone5 and when sending sms within 160 characters i am getting 2 sms counts deduction & i hear the message send sound twice. what is wrong here. can some one please help me here???
APPLE need to do something here!!!!!!1

Hi...
Thanks for your repaly .
and i am not bale to post a question in developer forum i tried hard but i didnt get .Can you plz explain me how to post a question in developer forum this is very helpfull for me.Because i never did this thing.

Hii i m frm BGD. I m using iphone 5. My carrier BGD ROBI AXIATA. When it was ios 6 it works better . But i recently upgrade to ios 7 and i facing the little problem. One of the ussd call. Plz help or suggest ir doing better about itz as soon as possible.

Hii i m frm BGD. I m using iphone 5. My carrier BGD ROBI AXIATA. When it was ios 6 it works better . But i recently upgrade to ios 7 and i facing the little problem. One of the ussd call. Plz help or suggest ir doing better about itz as soon as possible.

I'm not trying to minimize your issues, but I have an iPhone 5S and find that I have not had these types of problems on AT&T. I'm wonding if something has gotten stuck in a loop that is continually trying to use data. If you make a good backup of your phone, try restoring it as new, and do not add anything to the phone right away. Let the device run like this for a little while and see what kind of usage you have. You report you phone is showing usage of 21GB. Did you rese this setting on the phone to begin at your billing period? The reason I ask this is some people believe this setting resets on its own with your billing period, it does not. This has to be manually reset by the user, so it might not be that accurate depending on the last time that you reset it.
If the phone seems to not use so much extra data during the period the device does not have extra apps on it, then try restoring from your backup and see what happens. If this increases your data usage quite fast again, then there is probably something corrupt in the backup that is causing this issue.

HT201077 photos not getting added up in my photostream. It's showing some kinda registry error in my windows. Plz help

photos not getting added up to my photostream. It's showing some kinda registry error in my windows. Plz help!!

Hi Melissa_C!
I have an article for you that may help shed light on this circumstance:
iCloud: My Photo Stream FAQ
http://support.apple.com/kb/ht4486
How long are My Photo Stream photos stored in iCloud?
The photos you upload to My Photo Stream are stored in iCloud for 30 days to give your devices plenty of time to connect and download them.
How many photos are stored in My Photo Stream on my devices and computers?
iCloud pushes all your photos to the My Photo Stream album on your devices and computers, and manages them efficiently, so you don’t run out of storage space.
Your iOS devices keep a rolling collection of your last 1000 photos in the My Photo Stream album. From there, you can browse your recent photos or move the ones you like to your Camera Roll or another album to keep them on your device forever.
Because your Mac and PC have more storage than your iOS devices, you can choose to have all of your My Photo Stream photos automatically downloaded. In iPhoto or Aperture preferences on your Mac, select Photos (or Photo Stream) > My Photo Stream > Automatic Import. All of your photo stream photos will be imported into your Events, Projects, Photos, Faces, and Places folders in iPhoto or Aperture. On your PC with My Photo Stream enabled in the Control Panel, all of your photos will be imported into C:\\Users\<user name>\Pictures\iCloud Photos\My Photo Stream. For iCloud Control Panel 2.0 to 2.1.2 users, the path isC:\\Users\<user name>\Pictures\Photo Stream\My Photo Stream .
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Plz help me some one

Similar Messages

Maybe you are looking for