Plz help me to solve

Hi..
I m getting problem when i executing the below proc..
I m taking the string of personid's from frntend and as our COM doesn't support ',' i getting the values seperated by pipe '|' and in proc i m repalcing it to ',' and den i have to chk it in IN condition and take all da records in a Cursor and i hav return bac.. But when i hardcoding the values i m getting result but when i using da variable string it is nt fecthing data..plz help me
CREATE OR REPLACE PROCEDURE prn_tst(strVal IN     VARCHAR2)
     AS
          strl VARCHAR2(40);
          cur SYS_REFCURSOR;
          strname VARCHAR2(60);
     BEGIN
          SELECT REPLACE(strval,'|',',') INTO strL FROM DUAL;
          DBMS_output.put_line(strL);
          SELECT (REPLACE(strl,'+','''')) INTO strL FROM DUAL;
          DBMS_output.put_line(strL);
          OPEN cur FOR          
               SELECT name
               FROM cmnperson
               WHERE TO_CHAR(personid) IN (strL);     
          LOOP
               FETCH cur INTO strname;
               EXIT WHEN cur%NOTFOUND;
               DBMS_output.put_line('IN' || strname);
          END LOOP;
          SELECT name
          INTO strname
          FROM cmnperson
          WHERE TO_CHAR(personid) IN (TRIM(strL));
          DBMS_output.put_line('IN' || strname);
     END prn_tst;

i have this procedure it is giving err when i m compling
PLS-00103: Encountered the symbol "))
INNER JOIN PRGNOSSPROGRAM
ON
CDTAPPLICATION.progr" when expecting one of the following:
( - + case mod new null <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current max min prior sql stddev sum variance execute
forall merge time timestamp interval date
<a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
CREATE OR REPLACE PROCEDURE prn_ACCertPrintRep(strCandidateid In Varchar2,
                              strAccode In Cdtapplication.accode %TYPE,
                    strBatchNo In Cdtapplication.batchno %TYPE,
                              cur_GetCertDetails Out SYS_REFCURSOR)
     AS
     strtemp Varchar2(50);
     strlist Varchar2(50);
     strFinalList Varchar2(50);
     strCode Varchar2(20) :='PC';
     BEGIN
     SELECT replace(strCandidateid,'|',',')
          INTO strtemp
     FROM dual;
     SELECT replace(strtemp,'-','''')
          INTO strlist
     FROM dual;
     dbms_output.put_line(strlist);     
     OPEN cur_GetCertDetails
          FOR                    
          'SELECT cdtapplication.programcode As PrgCode,
               programname,
          programlevel,
          cmnperson.name As PersonName,
          icnumber,     
          acname,
          accenter.town As Town,
          sctstate.name As State
          FROM (CDTAPPLICATION
          INNER JOIN CDTPPLEVALUATIONH
               ON
                    CDTAPPLICATION.candidateid = CDTPPLEVALUATIONH.candidateid
               AND
                    UPPER(TRIM(CDTAPPLICATION.wfstatuscode)) = ' || strCode || ')
               AND
                    TO_CHAR(CDTAPPLICATION.candidateid) IN (' || strlist || ')
          INNER JOIN ACCENTER
               ON
                    CDTAPPLICATION.accode = ACCENTER.accode
               AND
                    UPPER(TRIM(CDTAPPLICATION.accode)) = UPPER(TRIM(' ||strAccode || '))
               AND
                    UPPER(TRIM(CDTAPPLICATION.batchno)) = UPPER(TRIM(' ||strBatchNo ||'))
          INNER JOIN PRGNOSSPROGRAM
               ON
                    CDTAPPLICATION.programcode = PRGNOSSPROGRAM.programcode
          INNER JOIN CMNPERSON      
               ON
                    CDTAPPLICATION.personid = CMNPERSON.personid)
          INNER JOIN SCTSTATE
               ON
                    ACCENTER.statecode = SCTSTATE.statecode;
     END prn_ACCertPrintRep;

Similar Messages

  • Hi,I have 4s,I have a problem since 2days that the ring tone,lock sound,password sound,volume button and slide,calls flash,all sometimes working and sometimes not,plz help me to solve this problem.thanks

    HI
    i have iPhone 4s with iOS 8.1.3 , since 2 days I'm facing a problem that the ring tone,lock button sound,password sound,volume buttons,slide volume and incoming call flash,
    all these not working properly , sometimes it will work and sometimes it will not, I tried to restart the phone many times but I didn't fix the problem
    plz help me to solve this problem

    Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
    If this does not help, setting it up as new device would be the next step:
    How to erase your iOS device and then set it up as a new device or restore it from backups

  • Plz help me in solving this problem

    Hi all
    i am facing a problem with calculation of billing amount,late/delayed payment surcharge(DPS),and arrear.the problem is there is no any particular field in DFKKOP table where the value against these fields are stored and rest 2 fields value DPS AND ARREAR comes from FPL9 SAP IS-U standard report ,it comes calculated from there and directly print on bill from script.can any body tell me is there any way to find out the value of DPS/ARREAR through FPL9 or by bill.all the fields are required in report.the billed amount is in DFKKOP-BETRW.
    plz show me some way to solve the issue
    thank.
    gaurav

    HI MANOHAR
    thanks for your help,but plz elaborate on
    1. how to use ST05 on fpl9 is there any procedure so plz tell me how to analyse the performance,and how to identify the problem area
    2.FPL9 is having entries against many heads(clearing reasons) around 35 through which the ARREAR is calculated how to identify which head is useful for ARREAR calculation.
    3.DFKKOP table having HVORG/TVORG/AUGRD fields these fields having entries against amount field but no field is maintained for arrear it's calculated value through HVORG/TVORG/AUGRD combination.,can u help me in identifying which combination is used for arrear calculation.

  • Error on deployment (plz help me to solve this very urgent.....)

    Result
    => deployment aborted : file:/C:/DOCUME1/E371011/LOCALS~1/Temp/temp20811ApplicationTest.ear
    Aborted: development component 'ApplicationTest'/'local'/'LOKAL'/'0.2007.06.22.16.36.17':Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [epmft] with user name: [J2EE_ADMIN]                     Check your login information.                     Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Cannot authenticate the user.] (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)

    Hi Shanto,
    Either your admin password is expired or you have changed the administrator password.
    Do the following Steps,
    Use the Config Tool to change the entry in secure storage as follows:
    1. Start the Config Tool.
    (Execute <SAPj2eeEngine_install_dir> configtoolconfigtool.bat.)
    2. Select the secure store node.
    The configuration for the secure storage in the file system appears.
    3. Select the admin/password/<SID> entry.
    4. Enter the administrator user's new password in the "Value" field and choose "Add".
    5. Choose "File" --> "Apply" to save the data.
    Note: Contrary to the message that appears, you do not need to restart the server or cluster for this change to take effect.
    6. Finally restart SDM server.
    Then deploy.
    refer SAP note : <a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_jas/~form/handler">701654</a>
    Regards,
    Mithu

  • Plz help me in solving this

    hi
    my requirement is
    emp number from PA00001 i have to take the value of STELL feild
    next from HRP1001 table i have toenter data by giving SCLASS -Q
    OTYPE - C and STELL  number
    i have to collect sobid and sclass
    next from HRP1000 table i have to enter OTYPE -q and SOBID and get the ut put feild as STEXT

    Hi
    see the sample code and do accordingly
    report zporgr0040
           line-size 108
           line-count 60(1)
           no standard page heading
           message-id zndc.
    Database Tables
    tables: hrp1001,     " HR Master Record (Orgn. Assignment)
            pa0002,      " Personal Data
            t528t,       " Position Texts
            t527x,       " Org Unit Text
            t528b,       " Positions
            csks,        " Cost Center
            cskt.        " Cost Center Texts
    Declaration of Internal Tables
    Internal Table for Orgn Object Data  HRP1000
    data: begin of obj_tab occurs 0,
            otype like hrp1000-otype,      " Object Type
            objid like hrp1000-objid,      " Object ID
            plvar like hrp1000-plvar,      " Plan Version
            istat like hrp1000-istat,      " Planning Status
            begda like hrp1000-begda,      " Begin date
            endda like hrp1000-endda,      " End date
          end of obj_tab.
    Internal Table for Active Employees data PA0000
    data: begin of stat_tab occurs 0,
            pernr like pa0000-pernr,       " Object Type
            begda like pa0000-begda,       " Begin date
            endda like pa0000-endda,       " End date
            stat2 like pa0000-stat2,       " Employment Status
          end of stat_tab.
    Internal Table for Actual Orgn Assignment Data PA0001
    data: begin of act_tab occurs 0,
            pernr like pa0001-pernr,       " Object Type
            begda like pa0001-begda,       " Begin date
            endda like pa0001-endda,       " End date
            kostl like pa0001-kostl,       " Cost Center
            orgeh like pa0001-orgeh,       " Org Unit
            plans like pa0001-plans,       " Position
            natio like pa0002-natio,       " Nationality
          end of act_tab.
    Internal Table for Orgn Data HRP1001
    data: begin of org_tab occurs 0,
            otype like hrp1001-otype,      " Object Type
            objid like hrp1001-objid,      " Object ID
            plvar like hrp1001-plvar,      " Plan Version
            istat like hrp1001-istat,      " Planning Status
            begda like hrp1001-begda,      " Begin date
            endda like hrp1001-endda,      " End date
            subty like hrp1001-subty,      " Sub Type
            sclas like hrp1001-sclas,      " Type of Related Object
            sobid like hrp1001-sobid,      " Id of Related Object
            kostl like pa0001-kostl,       " Cost Center
            plstx like t528t-plstx,        " Position Text
            orgtx like t527x-orgtx,        " Org Unit Text
          end of org_tab.
    Internal Table for Position Calculations
    data: begin of org1_tab occurs 0,
            kostl like pa0001-kostl,       " Cost Center
            objid like hrp1001-objid,      " Object ID
          end of org1_tab.
    Internal Table for Position Calculations
    data: begin of org2_tab occurs 0,
            kostl like pa0001-kostl,       " Cost Center
            count type i,                  " No of Positions
          end of org2_tab.
    Internal Table for Actual Manpower Calculations
    data: begin of act1_tab occurs 0,
            kostl like pa0001-kostl,       " Cost Center
            natio like pa0002-natio,       " Nationality
            plans like pa0001-plans,       " Position
          end of act1_tab.
    Internal Table for Actual Manpower Calculations(UAE)
    data: begin of act2_tab occurs 0,
            kostl like pa0001-kostl,       " Cost Center
            natio like pa0002-natio,       " Nationality
          end of act2_tab.
    Internal Table for Actual Manpower Calculations(Others)
    data: begin of act3_tab occurs 0,
            kostl like pa0001-kostl,       " Cost Center
            natio like pa0002-natio,       " Nationality
          end of act3_tab.
    Internal Table for Actual Manpower Calculations(UAE)
    data: begin of act4_tab occurs 0,
            kostl like pa0001-kostl,       " Cost Center
            count1 type i,                 " No of Positions(UAE)
          end of act4_tab.
    Internal Table for Actual Manpower Calculations(OTHERS)
    data: begin of act5_tab occurs 0,
            kostl like pa0001-kostl,       " Cost Center
            count2 type i,                 " No of Positions(Others)
          end of act5_tab.
    Internal Table for Vaccancies Data
    data: begin of vac_tab occurs 0,
            plvar like hrp1007-plvar,      " Plan Version
            otype like hrp1007-otype,      " Object Type
            objid like hrp1007-objid,      " Object ID
            istat like hrp1007-istat,      " Planning Status
            begda like hrp1007-begda,      " Begin date
            endda like hrp1007-endda,      " End date
            vacan like hrp1007-vacan,      " Vacancy Indicator
            status like hrp1007-status,    " Status of Vacancy
          end of vac_tab.
    Internal Table to store the Report Output data
    data : begin of rep_tab occurs 0 ,
             kostl(10) type n,                  " Cost Cente
             plans   like pa0001-plans,         " Position
             vacan   like hrp1007-vacan,        " Vacancy Indicator
             status  like hrp1007-status,       " Status of Vacancy
             plstx   like t528t-plstx,          " Position Text
             orgtx like t527x-orgtx,            " Org Unit Text
           end of rep_tab.
    Internal Table to store the Report Output data
    data : begin of rep1_tab occurs 0 ,
             kostl(10) type n,                  " Cost Cente
             cnt     type i,                    " No of Vacancies
           end of rep1_tab.
    Internal Table to store the Report Output data
    data : begin of rep2_tab occurs 0 ,
             kostl(10) type n,                  " Cost Cente
             app_no    type i,                  " Approved
             nat_no    type i,                  " National
             exp_no    type i,                  " Expatriate
             tot_no    type i,                  " Total
             vac_no    type i,                  " Vacancies
           end of rep2_tab.
    Declaration of Variables
    data: v_sobid  like hrp1001-sobid,   " Object Id
          v_sobid1 like hrp1001-sobid,   " Object Id
          v_sobid2 like hrp1001-sobid,   " Object Id
          v_sclas  like hrp1001-sclas,   " Related Obj Type
          v_subty  like hrp1001-subty,   " Related Object Id
          v_otype  like hrp1007-otype,   " Object Type
         v_str(9)    type c,            " Text
         v_str1(10)  type c,            " Text
          v_cnt    like sy-tabix.        " Table Index
    Declaration of Constants
    constants : c_x         type c value 'X',            " Flag
                c_stat1  like pa0000-stat2  value '3',   " Emp Status
                c_plan   like hrp1001-plvar value '01',  " Plan Version
                c_name   like hrp1000-uname value 'SAP', " Uname
                c_uae    like pa0002-natio  value 'AE',  " Country
                c_type   like hrp1007-otype  value 'O',  " Object Type
                c_otype  like hrp1007-otype  value 'S',  " Object Type
                c_stat   like hrp1007-status value '0',  " Status
                c_pstat  like hrp1007-istat  value '1',  " Plang Status
                c_sclas  like hrp1001-sclas value 'K',    " Rel. Obj Type
                c_subty  like hrp1001-subty value 'A002', " Related ObjId
                c_subty2 like hrp1001-subty value 'A003', " Related ObjId
                c_sclas1 like hrp1001-sclas value 'O',    " Rel.Obj Type
                c_subty1 like hrp1001-subty value 'A011', " Rel.Object Id
                c_kokrs  like coej-kokrs value '1000'. " Controlling Area
    Selection Screen
    selection-screen begin of block b1 with frame title text-001.
    parameters     :
      p_date  like pa0001-begda obligatory default sy-datum. " Date
    select-options :
      s_kostl for csks-kostl,                     " Cost Center
      s_plans for t528b-plans.                    " Position ID
    selection-screen end of block b1.
    At selection-screen
    at selection-screen.
    Validate the Selection Screen fields
      perform validate_screen.
    Start-of-Selection
    start-of-selection.
    Get the Orgn data from database Table HRP1001
      perform get_org_data.
    Get the Actual Manpower from PA0001
      perform get_act_data.
    Get the Vaccancies data from database Table HRP1007
      perform get_vac_data.
    Append the data into final Internal Table
      perform append_data.
    Top-of-page
    top-of-page.
    Write the Report and Column Headings
      perform top_of_page.
    End-of-Page
    end-of-page.
      write /1(108) sy-uline.
    End-of-Selection
    end-of-selection.
    Display the Output Report.
      perform display_report.
    Form-Routines
    *&      Form  validate_screen
    Validation of selection Screen fields
    form validate_screen.
    Validation of Position ID
      clear t528b.
      if not s_plans[] is initial.
        select single plans
          into t528b-plans
          from t528b
          where plans in s_plans.
        if sy-subrc <> 0.
          message e999 with 'Invalid Position ID'(009).
        endif.
      endif.
    Validation of Cost Center
      clear csks.
      if not s_kostl[] is initial.
        select single kostl
          into csks-kostl
          from csks
          where kostl in s_kostl.
        if sy-subrc <> 0.
          message e999 with 'Invalid Cost Center'(008).
        endif.
      endif.
    endform.                  "validate_screen
    *&      Form  get_org_data
    Get the Orgn Data from Database Table HRP1001
    form get_org_data.
    v_str  = 'Developee'(002).
    v_str1 = 'Deployment'(003).
    Select All the Positions from HRP1000
      select otype       " Object Type
             objid       " Object ID
             plvar       " Plan Version
             istat       " Planning Status
             begda       " Begin date
             endda       " End date
         into table obj_tab
         from hrp1000
         where otype = c_otype  and
               plvar = c_plan   and
               istat = c_pstat  and
               begda le p_date  and
               endda ge p_date  and
               objid in s_plans and
               uname ne c_name.
      sort obj_tab by otype objid.
    Get the Orgn and Cost Center for all the above Positions
      if not obj_tab[] is initial.
        select otype       " Object Type
               objid       " Object ID
               plvar       " Plan Version
               istat       " Planning Status
               begda       " Begin date
               endda       " End date
               subty       " Sub Type
               sclas       " Type of Related Object
               sobid       " Id of Related Object
           into table org_tab
           from hrp1001
           for all entries in obj_tab
           where otype = c_otype  and
                 plvar = c_plan   and
                 istat = c_pstat  and
                 begda le p_date  and
                 endda ge p_date  and
                 sclas eq c_sclas1 and
                 subty eq c_subty2 and
                 objid eq obj_tab-objid.
      endif.
      sort org_tab by otype objid.
    Get the Cost Center
      loop at org_tab.
        v_otype = c_otype.       " S
        v_sclas = c_sclas.       " K
        v_subty = c_subty1.                                     " A011
        v_sobid = org_tab-objid.
        perform get_org using v_otype v_sclas v_subty
                        v_sobid.
        if sy-subrc = 0.
          org_tab-kostl = hrp1001-sobid+0(10).
        else.
          v_otype = c_otype.    " S
          v_sclas = c_sclas1.   " O
          v_subty = c_subty2.                                   " A003
          v_sobid = org_tab-objid.
          perform get_org using v_otype v_sclas v_subty
                         v_sobid.
          if sy-subrc = 0.
            v_otype = c_type.     " O
            v_sclas = c_sclas.    " K
            v_subty = c_subty1.                                 " A011
            v_sobid1 = v_sobid.
            perform get_org using v_otype v_sclas v_subty
                                 v_sobid.
            if sy-subrc <> 0.
              v_otype = c_type.    " O
              v_sclas = c_sclas1.  " O
              v_subty = c_subty.                                " A002
              v_sobid = v_sobid1.
              perform get_org using v_otype v_sclas v_subty
                        v_sobid.
              if sy-subrc = 0.
                v_otype = c_type.   " O
                v_sclas = c_sclas.  " K
                v_subty = c_subty1.                             " A011
                v_sobid2 = v_sobid.
                perform get_org using v_otype v_sclas v_subty
                                 v_sobid.
                if sy-subrc <> 0.
                  v_otype = c_type.   " O
                  v_sclas = c_sclas1. " O
                  v_subty = c_subty.                            " A002
                  v_sobid = v_sobid2.
                  perform get_org using v_otype v_sclas v_subty
                          v_sobid.
                else.
                  org_tab-kostl = hrp1001-sobid+0(10).
                endif.
              endif.
            else.
              org_tab-kostl = hrp1001-sobid+0(10).
            endif.
          else.
            v_otype = c_otype.   " S
            v_sclas = c_otype.   " S
            v_subty = c_subty.                                  " A002
            v_sobid = org_tab-objid.
            perform get_org using v_otype v_sclas v_subty
                           v_sobid.
            if sy-subrc = 0.
              v_otype = c_otype.  " S
              v_sclas = c_sclas.  " K
              v_subty = c_subty1.                               " A011
              v_sobid1 = v_sobid.
              perform get_org using v_otype v_sclas v_subty
                                   v_sobid.
              if sy-subrc <> 0.
                v_otype = c_otype.  " S
                v_sclas = c_sclas1. " O
                v_subty = c_subty2.                             " A003
                v_sobid = v_sobid1.
                perform get_org using v_otype v_sclas v_subty
                          v_sobid.
                if sy-subrc = 0.
                  v_otype = c_type.   " O
                  v_sclas = c_sclas.  " K
                  v_subty = c_subty1.                           " A011
                  v_sobid2 = v_sobid.
                  perform get_org using v_otype v_sclas v_subty
                                   v_sobid.
                  if sy-subrc <> 0.
                    v_otype = c_type.    " O
                    v_sclas = c_sclas1.  " O
                    v_subty = c_subty.                          " A002
                    v_sobid = v_sobid2.
                    perform get_org using v_otype v_sclas v_subty
                            v_sobid.
                  else.
                    org_tab-kostl = hrp1001-sobid+0(10).
                  endif.
                endif.
              else.
                org_tab-kostl = hrp1001-sobid+0(10).
              endif.
            endif.
          endif.
        endif.
    Get the Position Text
        clear t528t.
        select single plstx from t528t into t528t-plstx
          where sprsl = sy-langu and
                otype = c_otype  and
                plans = org_tab-objid.
        org_tab-plstx = t528t-plstx.
    Get the Org Unit Text
        clear t527x.
        select single orgtx from t527x into t527x-orgtx
          where sprsl = sy-langu and
                orgeh = org_tab-sobid+0(8).
        org_tab-orgtx = t527x-orgtx.
        modify org_tab index sy-tabix.
        clear v_sobid.
      endloop.
      sort org_tab by otype objid.
    Calculate the Approved No of Positions
      loop at org_tab.
        if org_tab-kostl in s_kostl.
          move-corresponding org_tab to org1_tab.
          append org1_tab.
          clear org1_tab.
        endif.
      endloop.
      sort org1_tab by kostl objid.
      clear v_cnt.
      loop at org1_tab.
        at end of kostl.
          sy-tabix = sy-tabix - v_cnt.
          org2_tab-kostl = org1_tab-kostl.
          org2_tab-count   = sy-tabix.
          v_cnt = v_cnt + sy-tabix.
          append org2_tab.
          clear:org2_tab.
        endat.
      endloop.
      sort org2_tab by kostl.
    endform.              "get_org_data
    *&      Form  get_act_data
    Get the Actual Manpower Data from Database Table PA0001
    form get_act_data.
      clear  : stat_tab, act_tab.
      refresh: stat_tab, act_tab.
    Get all the Active Employees
      select pernr       " Object Type
             begda       " Begin date
             endda       " End date
             stat2       " Emp Status
           into table stat_tab
           from pa0000
           where stat2 eq c_stat1 and
                 begda le p_date  and
                 endda ge p_date.
      sort act_tab by pernr.
      if not stat_tab[] is initial.
        select pernr       " Object Type
               begda       " Begin date
               endda       " End date
               kostl       " Cost Center
               orgeh       " Org Unit
               plans       " Position
           into table act_tab
           from pa0001
           for all entries in stat_tab
           where pernr eq stat_tab-pernr and
                 kostl in s_kostl and
                 plans in s_plans and
                 persg eq '1'     and
                 begda le p_date  and
                 endda ge p_date.
      endif.
      sort act_tab by pernr.
      loop at act_tab.
        move-corresponding act_tab to act1_tab.
        clear pa0002-natio.
        select single natio into pa0002-natio from pa0002
          where pernr = act_tab-pernr.
        if sy-subrc = 0.
          act1_tab-natio = pa0002-natio.
        endif.
        append act1_tab.
        clear act1_tab.
      endloop.
      sort act1_tab by kostl natio.
    Calculate the Local and Expatriate Manpower
      loop at act1_tab.
        if act1_tab-natio = c_uae.
          act2_tab-kostl = act1_tab-kostl.
          act2_tab-natio = act1_tab-natio.
        else.
          act3_tab-kostl = act1_tab-kostl.
          act3_tab-natio = act1_tab-natio.
        endif.
        append: act2_tab, act3_tab.
        clear : act2_tab,act3_tab.
      endloop.
      sort act2_tab by kostl.
      sort act3_tab by kostl.
    Actual UAE Manpower
      clear v_cnt.
      loop at act2_tab.
        at end of kostl.
          sy-tabix = sy-tabix - v_cnt.
          act4_tab-kostl   = act2_tab-kostl.
          act4_tab-count1  = sy-tabix.
          v_cnt = v_cnt + sy-tabix.
          append act4_tab.
          clear:act4_tab.
        endat.
      endloop.
      sort act4_tab by kostl.
    Other Countries
      clear v_cnt.
      loop at act3_tab.
        at end of kostl.
          sy-tabix = sy-tabix - v_cnt.
          act5_tab-kostl   = act3_tab-kostl.
          act5_tab-count2  = sy-tabix.
          v_cnt = v_cnt + sy-tabix.
          append act5_tab.
          clear:act5_tab.
        endat.
      endloop.
      sort act5_tab by kostl.
    endform.              "get_act_data
    *&      Form  get_org
    Get the Cost Center from Parent Org Id
    form get_org using p_v_otype p_v_sclas p_v_subty p_v_sobid.
      clear hrp1001.
      select single * from hrp1001
            where otype = p_v_otype  and
                  plvar = c_plan   and
                  istat = c_pstat  and
                  begda le p_date  and
                  endda ge p_date  and
                  sclas eq p_v_sclas   and
                  subty eq p_v_subty  and
                  objid eq p_v_sobid.
      v_sobid = hrp1001-sobid+0(8).
    endform.                    " get_org
    *&      Form  get_vac_data
    Get the Vaccancies Data from Database Table HRP1007
    form get_vac_data.
      if not org_tab[] is initial.
        select plvar       " Plan Version
               otype       " Object Type
               objid       " Object ID
               istat       " Planning Status
               begda       " Begin date
               endda       " End date
               vacan       " Vacancy Indicator
               status      " Status of Vacancy
           into table vac_tab
           from hrp1007
           for all entries in org_tab
           where plvar = c_plan   and
                 otype = c_otype  and
                 istat eq c_pstat and
                 objid = org_tab-objid and
                 begda le p_date and
                 endda ge p_date and
                 vacan eq c_x  and
                 status eq c_stat.
      endif.
      sort vac_tab by plvar otype objid.
    Get the HR data into the rep_tab Internal Table
      loop at vac_tab.
        rep_tab-plans  = vac_tab-objid.
        rep_tab-vacan  = vac_tab-vacan.
        rep_tab-status = vac_tab-status.
        read table org_tab with key objid = vac_tab-objid.
        if sy-subrc = 0.
          rep_tab-kostl = org_tab-kostl.
          rep_tab-plstx = org_tab-plstx.
          rep_tab-orgtx = org_tab-orgtx.
        endif.
        append rep_tab.
        clear  rep_tab.
      endloop.
      loop at rep_tab.
        if not rep_tab-kostl in s_kostl.
          delete rep_tab index sy-tabix.
        endif.
      endloop.
      sort rep_tab by kostl plans.
    delete rep_tab where plstx cs v_str.
    delete rep_tab where orgtx cs v_str1.
    Calculate the Count of Vacancies in each Division
      clear v_cnt.
      loop at rep_tab.
        at end of kostl.
          sy-tabix = sy-tabix - v_cnt.
          rep1_tab-kostl = rep_tab-kostl.
          rep1_tab-cnt   = sy-tabix.
          v_cnt = v_cnt + sy-tabix.
          append rep1_tab.
          clear:rep1_tab.
        endat.
      endloop.
      sort rep1_tab by kostl.
    endform.                  "get_vac_data
    *&      Form append_data
    Append the data into final Internal Table
    form append_data.
      loop at org2_tab.
        rep2_tab-kostl = org2_tab-kostl.
        rep2_tab-app_no = org2_tab-count.
        read table act4_tab with key kostl = org2_tab-kostl
                                     binary search.
        if sy-subrc = 0.
          rep2_tab-nat_no = act4_tab-count1.
        endif.
        read table act5_tab with key kostl = org2_tab-kostl
                                     binary search.
        if sy-subrc = 0.
          rep2_tab-exp_no = act5_tab-count2.
        endif.
        read table rep1_tab with key kostl = org2_tab-kostl
                                     binary search.
        if sy-subrc = 0.
          rep2_tab-vac_no = rep1_tab-cnt.
        endif.
        rep2_tab-tot_no = rep2_tab-nat_no + rep2_tab-exp_no.
        append rep2_tab.
        clear rep2_tab.
      endloop.
      sort rep2_tab by kostl.
    endform.             "append_data
    *&      Form  top_of_page
    Write the Report and Column Headings
    form top_of_page.
      skip.
      format color col_heading on.
      write: /1(108) 'NATIONAL DRILLING COMPANY'(010) centered,
             /1(108) 'Summary of Manning Level Report'(011) centered.
      format color off.
      skip.
      write: /2 'Key Date        :'(013), p_date,
             75 'Report Run Date:'(041), sy-datum.
      if not s_kostl[] is initial.
        if s_kostl-high is initial.
          write: /2 'Cost Center     :'(023), s_kostl-low,
                 75 'Time           :'(042), sy-uzeit.
        else.
          write: /2 'Cost Center From:'(024), s_kostl-low+7(3),
                                    'To'(022), s_kostl-high,
                 75 'Time           :'(042), sy-uzeit.
        endif.
      else.
        write: /75  'Time           :'(042), sy-uzeit.
      endif.
      if not s_plans[] is initial.
        if s_plans-high is initial.
          write: /2 'Position Id     :'(019), s_plans-low,
                 75 'User           :'(043), sy-uname.
        else.
          write: /2 'Position Id From:'(021), s_plans-low,
                              'To'(022), s_plans-high,
                 75 'User           :'(043), sy-uname.
        endif.
      else.
        write: /75 'User           :'(043), sy-uname.
      endif.
      write: /75 'Page No        :'(044), sy-pagno.
      skip.
      write /1(108) sy-uline.
      format color col_heading.
      write:/1 sy-vline,
            12 sy-vline, 53 sy-vline,
            64 sy-vline, 65(32)  'Actual'(018) centered,
            97 sy-vline,108 sy-vline.
      write:/1 sy-vline,  2(10) 'CostCenter'(014),
            12 sy-vline, 13(40) 'Description'(026) centered,
            53 sy-vline, 54(10) 'Approved'(025) centered,
            64 sy-vline, 65(32)  sy-uline,
            97 sy-vline, 98(10) 'Vacancies'(017),
           108 sy-vline.
      write:/1 sy-vline,
            12 sy-vline, 53 sy-vline,
            64 sy-vline, 65(10) 'National'(015) centered,
            75 sy-vline, 76(10) 'Expatriate'(020) centered,
            86 sy-vline, 87(10) 'Total'(016) centered,
            97 sy-vline,108 sy-vline.
      format color off.
      write /1(108) sy-uline.
    endform.               "top_of_page
    *&      Form  Display_report
    Write the Report Output
    form display_report.
      if rep2_tab[] is initial.
        message i999 with
        'No Data found for the entered Selection'(035).
      else.
        loop at rep2_tab.
    Authorization Check for the Orgn and Cost Centers
          perform auth_check_org.
          if sy-subrc = 0.
            clear cskt.
            select single ltext into cskt-ltext from cskt
                where spras = sy-langu and
                      kokrs = c_kokrs and
                      kostl = rep2_tab-kostl.
            format color col_normal.
            write: /1 sy-vline, 2(10) rep2_tab-kostl+7(3),
                   12 sy-vline, 13(40) cskt-ltext,
                   53 sy-vline, 54(10) rep2_tab-app_no,
                   64 sy-vline, 65(10) rep2_tab-nat_no,
                   75 sy-vline, 76(10) rep2_tab-exp_no,
                   86 sy-vline, 87(10) rep2_tab-tot_no,
                   97 sy-vline, 98(10) rep2_tab-vac_no,
                  108 sy-vline.
            format color off.
            at last.
              sum.
              format color 3.
              write /1(108) sy-uline.
              write: /1 sy-vline, 2(10) 'Total'(027),
                     12 sy-vline,
                     53 sy-vline, 54(10) rep2_tab-app_no,
                     64 sy-vline, 65(10) rep2_tab-nat_no,
                     75 sy-vline, 76(10) rep2_tab-exp_no,
                     86 sy-vline, 87(10) rep2_tab-tot_no,
                     97 sy-vline, 98(10) rep2_tab-vac_no,
                    108 sy-vline.
              format color off.
            endat.
          endif.
        endloop.
      endif.
      write /1(108) sy-uline.
    endform.                    " Display_report
    *&      Form  auth_check_org
    Authorization Check for the Orgn and Cost Center
    form auth_check_org.
      authority-check object 'ZNDCHROM'
            id 'PLVAR' dummy
            id 'OTYPE' dummy
            id 'KOSTL' field rep2_tab-kostl.
    endform.                  "auth_check_org
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • I have I-phone 5s and i forgot my rescue Email Address for security question1answer..now what can i..? i want to change security answer..plz help me

    i am using 5s and i dont remeber my rescue email address and answer of security question...
    i am unable to purchace any thing from app store..
    what can i do for changing either security answer or resucue email address ..?
    want to change rescue emaail address and securities answer..
    PLZ HELP M TO SOLVE THIS PROBLEM

    I firgot my rescue email adreas and that securities questions .. I know my apple id and password .. So i am using it .. Bt when i am going to purchase anything then my securite answer needed bt i dont know that .. If I want to know or change that then I need rescure email .. I forgot that also ..so how can I purchase any thing ..
    this is phone is my owned and m using it .. It not stolen .
    so whats the solution to get that answer or for rescue email .. Otherwise I cant purchase anything ..
    ANd nd i dont want to change my apple I'd .bcz I am using this id since 4-7 years

  • Not getting the chat  application?Plz Help

    Hai,
    Plz help me to solve this...This is my code:
    Correct me
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute">
        <mx:Script>
            <![CDATA[
                import mx.messaging.channels.NetConnectionChannel;
                private const sAddress:String = "rtmfp://stratus.adobe.com";
                private const dKey:String = "Developer Key" ;
                private var nc:NetConnection;
                private var myPeerID:string;
                private var farPeerID:String;
                private var sendStream:NetStream;
                private var recvStream:NetStream;
                private function initConnection():void
                    if(t1.text)
                        farpeerID = t1.text;
                    nc = new NetConnection;
                    nc.addEventListener(NetstatusEvent.NET_STATUS,ncStatus);
                    nc.connect(sAddress+dKey);
                private function ncStatus(event:NetStatusEvent):void
                    trace(event.info.code);
                    myPeerID = nc.nearID;
                    t1.text = myPeerID;
                private function initSendstream():void
                    trace("initSendstream");
                    sendStream = new Netstream(nc,NetStream.DIRECT_CONNECTIONS);
                    sendStream.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
                    sendstream.publish("media");
                    var sendStreamClient:Object = new Object();
                    sendstreamClient.onPeerConnect = function(callerns:Netstream):Boolean
                        farPeerID = callerns.farID;
                        trace("onPeerConnect "+farPeerID);
                        return true;
                    sendStream.client = sendstreamClient;
                private function initReceiveStream():void
                    recvStream = new NetStream(nc,farPeerID);
                    recvstream.addEventListener(NetStatus.NET_STATUS,netStatusHandler);
                    recvstream.play("media");
                    recvStream.client = this;
                public function receiveSomeData(str:string):void
                    t3.text = str;
                private function sendSomeData():void
                    sendStream.send("receiveSomeData",t2.text);
                private function netStatusHandler(event:NetStatus):void
                    trace(event.info.code);
            ]]>
        </mx:Script>
        <mx:TextInput x="22" y="10" width="235" id="t1"/>
        <mx:Button x="265" y="10" label="Connect" click="initConnection"/>
        <mx:TextInput x="22" y="40" id="t2"/>
        <mx:Button x="190" y="40" label="send Data" click="sendSomeData()"/>
        <mx:TextInput x="22" y="70" id="t3" width="252"/>
        <mx:Button x="22" y="100" label="initSendStream" click="initSendstream()"/>
        <mx:Button x="174" y="100" label="initReceiveStream" click="initReceivestream();"/>
    </mx:Application>
    ERRORS:
    1046: Type was not found or was not a compile-time constant: NetStatus.    p2p/src    p2p.mxml    line 63    1266493948995    203
    1046: Type was not found or was not a compile-time constant: Netstream.    p2p/src    p2p.mxml    line 40    1266493948980    201
    1046: Type was not found or was not a compile-time constant: string.    p2p/src    p2p.mxml    line 55    1266493948980    202

    ActionScript is case-sensitive and spelling-sensitive.  line 40, it's "NetStream" not "Netstream".  line 55, it's "String" not "string".  line 63, it's "NetStatusEvent" not "NetStatus".  and as i believe i pointed out in a different thread, there must be a slash between "rtmfp://stratus.adobe.com" and your developer key.

  • Plz help my iphone 4 not ringing ????

    In my iphone 4 its not ringing , i have check all button and volume is on!!!! its vibrating but when some one call me its not ringing plz help me to solve is matter....thanks

    Hello there Tgurnell
    Thank you for using Apple Support Communities.
    It sounds like the ringer is not ringing after the update to iOS 7.  I found an article with some steps to take when you are experiencing issues like this:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Cheers,
    Sterling

  • I have problem with daq..when it is connected with laptop it asks for all the options like sampling rate etc..It displays building VI and it stops..it is not processing further..cau u plz help to solve this problem

    i hav problem with daq initialisation...plz help to solve the above mentioned issue

    Hi muthu,
    we also have a problem: to less information…
    - What is connected to your laptop?
    - What is "it" in "it displays building VI"? Do you use the DAQ Assistent ExpressVI?
    - What means "plz"?
    And could you please put less text in the title of your message and more text (with relevant information) into the message body?
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • Plz help me solving following issues

    Hi SD experts,
    Plz help me solving following issues
    1) What do you mean by POD(proof of delivery) what is the use of pod? What are the con figuration you done in your project?
    2) When I am punching order after entering data like material No and quantity system should pop-up a screen of delivery date and status and invoice data and details, How can we configure this?
    3) Client requirement is he want horizon period in days format. but standard sap system It's in months format(gray mode). how can we change months to days?
    4) Quotation has been created for product-D, 10 quantities, sales order is created with reference to the quotation, system copies 10 quantities in sales order. How do you restrict in sales order end user should not change quantities, system should not allow for changes by en user?
    5)  when i creating the sales order the system show error "No customer master record exist for sold to party". How to rectify it?
    suitable solutions will be rewarded
    thansx & regards

    hi,
    Proof of delivery (POD) is an instrument involved in business processes in which an invoice is issued only after the customer has confirmed the delivery's arrival. In addition to the proof of delivery itself, you can also record the POD date, POD time, the actual quantity that arrived and the reason for possible differences in quantities. This is especially important for deliveries where the delivery quantity varies because of the nature of the goods or for which the exact delivery quantity is unknown from the start.
    You are now in a position to issue an accurate invoice based on the customer's confirmation of goods received. You no longer need to create credit memos. The reasons for deviation that occur most frequently in "real world" scenarios such as stock shrinkage, theft, certain characteristics of goods (volatility, for example), and transportation damage are recorded and analyzed in the system. This analysis is especially valuable when you are negotiating with forwarding agents, vendors, or customers, since all deviations can be reflected
    With regards
    Rajesh

  • Plz help to solve this error in out.println statement

    Hi All,
    I am pretty new to weblogic8.1.I am Getting a error if i try to concatenate a object to the string in out.println
    statement.
    For your kind reference progam and error pattern is enclosed.
    public class Test extends HttpServlet
    PrintWriter out;
    public void doGet(HttpServletRequest req,HttpServletResponse res) throws ServletException,IOException
    out=res.getWriter();
    String aaa="Google";
    out.println("Hai"+aaa);
    ERROR IS:
    Error 500--Internal Server Error
    java.lang.NoClassDefFoundError: java/lang/StringBuilder
         at Test.doGet(Test.java:15)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
         at
    weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
         at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
         at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    If i use the statement like;
    out.println("Hai");
    out.println(aaa); ...It works fine
    Plz, help me out there.Thanks All.
    Prith

    My guess is this is a classpath issue. Read weblogic's documentation on how to install the software thoroghly, then re-install it. Double check that JAVA_HOME is set properly, and that you are using a fairly recent Sun Java VM, versus an old MS Java VM...

  • [solved] Can't build libitl, plz help

    I try to install itools http://aur.archlinux.org/packages.php?ID=20954
    i get error with libitl ( one f Dependencies )
    yaourt -S libitl
    ln -sf ../../prayertime/src/prayer.h ../../build/itl/prayer.h
    ln -sf ../prayertime/src/prayer.o ../../build/prayer.o
    ln -sf ../prayertime/src/astro.o ../../build/astro.o
    make[2]: Leaving directory `/tmp/yaourt-tmp-root/aur-libitl/src/libitl-0.7.0/prayertime/src'
    make[1]: Leaving directory `/tmp/yaourt-tmp-root/aur-libitl/src/libitl-0.7.0/prayertime'
    ld build/*.o -Wl,--hash-style=gnu -Wl,--as-needed -shared -lm -lc -soname=libitl.so.0 -o build/libitl.so.0.0.7
    ld: unrecognized option '-Wl,--hash-style=gnu'
    ld: use the --help option for usage information
    make: *** [build/libitl.so] Error 1
    Aborting...
    i try to download the source and build then install and it's sucsseufel but whin i try to install  itools ayourt cant find it and try to install it first
    i use Arch64
    PLZ help
    Last edited by abauomy (2010-07-09 16:48:40)

    This thread appears to be of interest. I had to unset both makeflags and ldflags to get libitl to build correctly. You're going to have the same problem with itools, as its written by the same dev who's writing crappy makefiles.
    Last edited by falconindy (2010-07-09 14:02:05)

  • My payment method is decline.plz help me how do I solve this?

    Plz help me for my payment method is decline..

    To Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • I format my laptop win 7, 64 bit now i down load itunes 10.2.2 error in login 11556 there is also notes this request not available in us, so plz help me how i solved my problem

    can any body help me to solved my problem i format laptop operating system win 7, 64bit
    when i connect my iphone 4G transfer application there is error 11556 n store icon not visible

    There's some info on your error message number in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • Problem not solving..plz help..

    Hi all...i'm tired of written problems here of x2-01.....1..It shows double-2 files in music player...2..when i download any game or app & try to move them to any folder of memory caed..it says name already exists or name already exists in target folder1..2 or any other...(some apps or games i able to move)...i went nokia care many times..but no use..i'm tired of restore it's factory settings many times...(all problems with memory card,so i think it's memory card defective..i already changed it..but no use..before i have microsd & now i have microsdhc)..so please tell me why it happens..is problem with memory card or anything else...plz help...!

    Same problem here ..but NO solution yet ..
    BTW this may make interesting reading ...

Maybe you are looking for