Plz help my phone E50 is not starting due to softw...

plz help my phone E50 is not starting due to software update it just blinks Screen & go off....
when 2 min. left for completing the update it goes off & now its not starting...
Plz help is it repairable?
Thanks
Usman Khan

I do not know the E50 but this helped people who had similar problems with other phones.
If this fails ..you need to find your nearest Nokia Service centre to re-flash your FW.
http://www.allaboutsymbian.com/support/item/When_everything_goes_horribly_wrong_in_Nokia_Software_Up...

Similar Messages

Help, my Mac mini will not start up, only keeps thinking on first page( white screen with apple emblem)

Help, my Mac mini will not start properly. Only goes to the white screen with thinking. Will not go to the password section

Are you sure about your hard disk health, any clicking noice recently?
Go to boot menu (press option button or button left to your space bar while booting) > Select Recovery drive > Disk utility > Verify the volume on which OS X is installed.

Why can't i connect to my iphone after updating to 7.1.1? i don't even get the screen that lets me login into my apple account??? plz help my phone was stolen and through help of the police i recovered it and now i can't access my phone

why can't i connect to my iphone after updating to 7.1.1? i don't even get the screen that lets me login into my apple account??? plz help my phone was stolen and through help of the police i recovered it and now i can't access my phone

You must have had find my iPhone on, or it was locked by your phone carrier.
Call your our cell carrier first.
then log on to a computer to iCloud to erase your iPhone.
NOW... You will be able to setup with a backup.

Windows Backup - The backup application coud not start due to an internal error: You must be logged on as an administrator to perform this task. (0x8100000010).

Windows 7 users in my domain are unable to configure or change backup settings. Users are able to open Control Panel > Backup and Restore, but when they click
Change settings, they receive the error: Windows Backup - The backup application coud not start due to an internal error: You must be logged on as an administrator to perform this task. (0x8100000010).
The same error is received when executing sdclt.exe /configure at the command prompt, regardless of whether the command prompt is launched using "run as administrator".
I've done significant testing, and have been able to determine that the local administrator account is able to configure backups before the computer is joined to the domain. Once the computer is joined to the domain, the local administrator account
and domain users who are in the local administrators group are no longer able to configure backup and restore. Domain administrators are able to configure backups.
This is a new issue, which began occuring sometime in the last 2 months. 3 months ago, users were able to configure backups without issue, and those computers with backups configured are still able to run their backups and do restores; however the
settings can no longer be changed.
Clearly something in the domain is doing this, but Group Policy has not been altered, and I can find no setting that would be doing this in any case. Any help is appreciated.

Hi,
So you mean you have tried different accounts in the local Administrator group and all of them failed?
If so, please check what group the local Administrator group belongs to? Does it belong to a group with limited privileges, such as the Guests group?
Tim Quan

Usage tracking problem : not started due to non-existent Usage Tracking tab

Hello,
I need some help after following the necessary steps to setup 'Usage Tracking'.
My table S_NQ_ACCT stays empty.
The structure in the rpd files looks like
* OBI Usage Tracking
Connection Pool
Usage Tracking Writer Connection Pool
Catalog
dbo
S_NQ_ACCT
My nqsconfig has the following entries related to usage tracking
# Usage Tracking Section
# Collect usage statistics on each logical query submitted to the
# server.
[ USAGE_TRACKING ]
ENABLE = YES;
DIRECT_INSERT = YES;
PHYSICAL_TABLE_NAME = "OBI Usage Tracking"."Catalog"."dbo"."S_NQ_ACCT";
CONNECTION_POOL = "OBI Usage Tracking"."Usage Tracking Writer Connection Pool" ;
BUFFER_SIZE = 10 MB ;
BUFFER_TIME_LIMIT_SECONDS = 5 ;
NUM_INSERT_THREADS = 5 ;
MAX_INSERTS_PER_TRANSACTION = 1 ;
When making queries on the Usage Tracking SA, I still receive the following error in the NQServer.log File
+[59049] Usage Tracking not started due to non-existent Usage Tracking table "<Database>"."<Catalog>"."<Schema>"."<Table>".+
What am I doing wrong??
Txs for your quick help on this!
Kr,
A.

Can you post your entire NQSConfig.INI file?
According to the message guide (http://download.oracle.com/docs/cd/E12103_01/books/AnyMsg/AnyMsg_Messages.html#wp1007961) the error you're getting specifies the table that OBIEE is trying to use, so the fact that yours reports literally "<Database>"."<Catalog>"."<Schema>"."<Table>" makes me think maybe the wrong config is being picked up. Also your comment that using a file instead of DB doesn't work either.

An error 1069 - )The service did not start due to logon failure) occurred while performing this service operation ...

Hi All,
We seem to be being plagued by the error below by our SQL Server agent. This happens almost everytime we restart the server that has been running for a day or two.
Our SQL Server Agent uses a none expiring domain credential. I understand that this problem only happens when the profile being used by the SQL Servr Agent has changed (password change). What puzzles me is that the login is A ok and no changes has been made to it's password.
We always resolve this problem by changing the login used in the SQL Server Agent to local and after that, returning it back to it's original domain login. Unfortunately, we cant always do this everytime something goes wrong.
Can anyone please help us shed a light on this? We're using SQL2k with SP3a. Thanks!
Error:
An error 1069 - )The service did not start due to logon failure) occurred while performing this service operation on the SQLServerAgent service.
Regards,
Joseph

Ran into this error, and the password was correct. What the System Event Log said:
Code SnippetEvent Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7041
Date: 10/8/2008
Time: 9:33:09 AM
User: N/A
Computer: ComputerName
Description:
The SQLSERVERAGENT service was unable to log on as DomainName\SQLAgent with the currently configured password due to the following error:
Logon failure: the user has not been granted the requested logon type at this computer.
Service: SQLSERVERAGENT
Domain and account: DomainName\SQLAgent
This service account does not have the necessary user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed, a Group Policy object associated with this node might be removing the right. Check with your domain administrator to find out if this is happening.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp
...sure enough it had been removed from the "Logon as a service" list. Hope this helps.

'error 1069 - (The service did not start due to a logon failure) in BAM

I installed BAM on XP SP2, i do have IIS configured and XE DB, after installing when i tried starting the services as per post-installion guide.i did found the error 'An error 1069 - (The service did not start due to a logon failure).In google i could find a remedy saying
Remedy: Go to Start /Programs / Administrative tools / Services. Right-click the Goodlink Server and select Properties. Click the Log On tab. Retype the correct password. Start the Goodlink service.
i did so but did found the same error.So i tried changing a few things in LogOn tab such as " Earlier it was logging in from machine name and pwd , since it gave an error" i changed it to local system account ." now all services of BAM have started except Oracle BAM Active Data cache.
Anyone pls rep how do i resolve this? Do i need to re-install? i need this to be done very urgently.

Windows XP is not a certified platform for BAM. However, the product works fine on XP for evaluations and demos. For production, use a certified/supported version of Windows as is documented in the Software System Requirements section of the BAM Install Guide.
All Postinstall steps apply to all versions of Windows that BAM runs on except for the Postinstall step called "Required Configuration for Microsoft Windows Server 2003". As indicated by the step name, this one is for W2003 only.
"network not found windows 53 error" is generally a network, account or password issue. Please follow the Install Guide step by step to avoid installation issues like this.
See "Troubleshooting Start Page Issues" for start page problems.
As indicated in the Install Guide, you can use host names or IP addresses:
"12. On the Configure location of Oracle BAM step, enter the host name or the IP
address where each component is to be installed, even if it is not being installed at
this time, then click Next."
Regards, Stephen

E50 does not start up

I noticed that I was not getting the signal on my recently bought E50 and thought to restart it. To my surprise it did not start again. It just hangs with white light and does not power up. I could not even power it off using the power button. The only way is to remove the battery.
Has anyone seen this problem? How to recover from it? This phone is not even a month old!!!
I am crossing my fingers that I have not made a mistake buying this new model.

I already tried that... just came back from the Nokia Care. They told the software crashed on the phone and reloaded the V06.27.1.0.
The phone is working again now; but lost all the memory and messages.
Nokia care people asked to check with them in coming week to upgrade the software to some new version to avoid these problems.
Do you know from where can I download V06.41.3.0 from net? I saw blackberry client on bussiness site saying it needs 6.41.3.0 version while my phone is not running with 6.27.1.0
Anyway thanks for your help.

Guys Plz help urgent Phone memory is 0

i recievd a song from bluetooth and it has been saved but it reduced phone memory i tried to fing that song inthe phone memory but not found in phone memory plz tell me the locations so i can transfer to mass memory or bluetooth and can u plz tell me how to change the path of recieving anything means i received from bluetooth i want that it should be go to directly to massmemory folder .
OR
any one can tell me how to transfer the song from phone memory to mass memory
Solved!
Go to Solution.

1) For your phone memory to be 0 you must have apps and everything stored there on C: and not utilising the mass storage E:.
I agree with matt_t that is how it is done when using bluetooth so havent a clue whats going on there.
2) Have you tried plugging your phone into your PC via USB and exploring your N97 throught my computer if using windows and double clicking the N97 icon.
Looking for the C: Phone folder and finding the song and dragging and dropping into E:mass memory music folder????
OR drag from your C: to your PC and dragging back to E:mass memory Music Foler if the above doesnt work.
BUT 1 song is usually on around 3MB so you still have issues with 0 memory.
3) If all your apps are stored on C: why dont you uninstall them and install onto your E:mass memory.
4) Internet i havent a clue about but with your memory so so low thats the least of your problems at the moment.
Thats all i have to help with i hope you find your song and your memory increases.
Message Edited by matto73 on 17-Oct-2009 05:45 PM
Nokia N97 Unbranded RM-505 [0585162]
Firmware 21.0.045
It's NOT about the Kudos they just make my day, hit the Star if I Helped.

My i phone 4 does not start

i switched my i phone 4 off yesterday when i went to sleep today i pushed the start button but it does not start only the apple logo appears on the screen help me please

Hello almutaze,
Having a nonfunctioning device can be frustrating. As it turns out, I have located an article that can help with devices that aren't responding. It contains a number of helpful troubleshooting steps:
iOS: Not responding or does not turn on - Apple Support
Your iPhone, iPad, or iPod touch may occasionally stop responding to buttons, switches, or touchscreen input and may exhibit one or more of these symptoms:
Does not return to the Home screen after you press the Home button
Does not wake from sleep after you press the Sleep/Wake button
Does not turn on (or power on) when you press any button
Does not start up past Apple logo
Appears frozen or unresponsive
Is unable to "Slide to Unlock" or "Slide to Power Off"
To troubleshoot these symptoms:
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

FireFox will not start due to message indicating that ssl3.dll is missing and indeed it is not in the program files. But I can not seem to be able to reinstall Firefox or to copy the ssl3.dll file into the program files. Help?

Webroot identified ssl3.dll as a threat and deleted it. Now I can not start Firefox, nor can I copy ssl3.dll into the Firefox Program file. I tried uninstalling Firefox and reinstalling it, but it always shows as an upgrade and does not seem to add ssl3.dll. HELP?

1. Open Webroot
2. Click on PC Security
3. Click on the Quarantine tab
4. Select ssl3.dd
5. Click restore

Dowload help queues up but will not start. Any ideas?

My download helper places a download in the queue but will not start. I have a linux machine and a windows machine they are both doing the samething. A friend who has three computers has the same issue on all three. Any ideas. We have refreashed firefox. Reinstalled download helper and set all the updates. I have set all the conversion points as directed as well.

See:
*https://addons.mozilla.org/firefox/addon/video-downloadhelper/
<blockquote>We are aware of downloading issues when using Firefox 36.
We have been working for months on a 100% new version which works on Firefox 36+ (it does not work on Firefox 35 and below) and we just released a first test version. If you want to test this version and provide feedback on it, please follow this link.</blockquote>
You can find a beta version here:
*https://groups.google.com/forum/#!forum/video-downloadhelper-5

Please help! Safari does not start due to a plugin failure. How can I remove librooksbas.dylib. Without being able to open safari. Finder does not find the file.

Please help.
iSafari does not start up due to an error caused by plug in librooksbas.dylib.
How can I remove this plugin without opening safari. Finder does not find the file, nor any other plugin.
Eric

For future reference, Safari Plugins are kept in Macintosh HD> Library> Internet Plugins.
To unhide the Library folder, open up Terminal (just type"Terminal" into spotlight) and type:
chflags nohidden ~/Library

Please help. my phone won't open/start. how can i reprogram/reformat my phone

hi guys. i have a sony xperia arc s. when i try to open/start my phone, it will turn off eventually after the xperia logo appears. it will restart on its own and again, turn off after the xperia logo. this will just repeat and will not start the phone properly. i have to remove the battery to turn the phone off. i had it checked in cellphone repair shops. they told me that my phone's program is defective and i have to reprogram/reformat the phone. is there a way that i can reprogram the phone myself and avoid any repair costs? i can't open the phone so i can't do the hard reset or restore factory settings. thanks.

You can try running a repair (this is done with the phone powered off):To repair the phone software
1.     Install PC Companion on a Windows PC from Support
2.     Turn on the phone, and connect it to the PC using a USB cable.
3.     In PC Companion, under Support Zone and click Start.
4.     Under Phone Software Update, click Start.
5.     Click repair phone.
6.     Follow the on-screen instructions. What are your thoughts about this forum? Let us know by doing this short survey.

HELP! my computer will not start!

Help Please...my powerbook g4 12" will not start up. when i power up, a white screen with a gray apple in the center is all that i see. i was reading some posts on this website, and found some information to bypass, and help move into safe mode, but when i get to the point where i am holding the shift key and the small gear looking thing is turning, it gets to a certain point and the computer shuts itself off. the computer was purchased in 2003, and has worked fine. the only thing i can think of that might have triggered a problem is that i just had to purchase a brand new power supply from apple, other than that there have been no changes in use. any and all assistance is greatly appreciated.
thanks
Karin K.

Karin:
i cleaned off my hard drive and started over...
I am not sure what you mean by "cleaned off", but if you mean an erase and install, you lose everything on the HDD. I recommend a reinstall only after we have exhausted other possibilities because it is the ultimate invasive procedure. It is also important to have a backup before attempting any major procedure.
i dont have the upgrades i made previously
If you mean the OS upgrades, try this:
Go to Applications > Utilities > Disk Utility.
Select your HDD (manufacturer ID) in left side bar.
Select First Aid in main panel.
Click Repair Disk Permissions.
Download and install Mac OS X 10.4.11 Combo update (PPC)
Computer will restart after installation.
Repair Disk Permissions as previously.
Go to Apple Menu > Software Update
Install all updates.
Repair Disk Permissions as previously.
is there any way to prevent this in the future?
1. Make sure you always have a current backup. The best way to do this is to clone your entire HDD to an external firewire HDD using a utility like SuperDuper or Carbon Copy Cloner
2. Develop a regular maintenance schedule. Here are a couple of articles that will help:
Mac OS X 10.3/10.4: System maintenance
Macintosh OS X Routine Maintenance
Please do post back if you have further questions or comments.
Good luck
cornelius

Plz help my phone E50 is not starting due to softw...

Similar Messages

Maybe you are looking for