Plz help! My Wii made me lose my internet!
So I basically epic failed at trying to connect my Nintendo Wii to my airport. What happened was I opened Airport Utility and attempted to add the "MAC Address" from my Wii to the airport Utility. This is the first time I've really used Airport Utility and know generally nothing technical about the airport. All I know is that I've had working internet from the Airport Express for almost two years. So I added the MAC address (it is the only address there, if that makes a difference) and it was SUCCESSFUL! Then it said it need to restart the airport for it to work, and it was also successful. This is where the problem began. I closed Airport Utility and although my Mac can SEE my Verizon Network, it cannot see the Airport. I tried opening Airport Utility and scanning for the Airport and it can't find it AT ALL! I tried unplugging the Airport and plugging it back it...Nothing. And every time click on my internet service it has this crazy password saved that is about 20 or more characters, which doesn't work and neither does my original password. WHAT IN THE WORLD DID I DO? Can I fix it, even if my Mac can't find the airport? Or am I better off buying another airport?
Cooleke, Welcome to the discussion area!
Do a hard reset of the AirPort Express (AX). It will then return to factory settings.
There is NO need to add the MAC address of the Wii to your AX. Once you did that and since it was the only one listed you told the AX to allow ONLY the Wii to connect wirelessly.
Similar Messages
-
hello, i just downloaded itunes on my acer laptop and its been giving me problems everytime i try to get on to the itunes store.. it gives me a message saying "itunes could not connect to the itunes store. an unknown error occurred. (310).plz help me out. i do have the internet on but it keeps giving me the same problems .. thanks..
Hi Young Prada,
If you are having issues connecting to the iTunes Store, you may find the following article helpful:
Apple Support: Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
- Brenden -
i recently deleted imovie 9 .and i don't have a cd and i have not made backup from time machine ..i want it back.plz help me..
It depends how you installed it.
If you installed from your iLife 11 DVD, then you can insert the DVD and install it again.
If you purchased it from the Mac App Store, you can open the Mac App Store, go to the Purchases tab, and reinstall from there. -
Plz help me about my Iphone 5s battary life is so bad without using in the night keep on after 6 hours morning when i open battary % lose 60 percentage with out using plz help me..
Maximize iPhone Battery (iOS7):
1) Turn off Airdrop: Control Center >AirDrop > Off
2) Limit background app refresh. Turn it off for applications such as Google/Facebook.Settings > General > Background App Refresh
3) Turn off automatic updates: Settings > iTunes & App Store > Updates and Apps (off)
4) Unneccessary Location Services: Settings > Privacy > Location Services > System Services > Off (uncheck as needed)
5) Turn off Paralax: Settings > General > Accessibility > Reduce Motion
6) Siri, and her 'raise to speak.' Turn it off: Settings > General > Siri > Raise to Speak
7) Exclude items from Spotlight search as needed: Settings > General > Spotlight Search
8) Remove unneccessary notifications: Settings > Notification Center > None (per app basis)
9) Make sure auto-brightness is on, or reduce the brightness to 25% or less if desired.Settings > Wallpapers & Brightness
10) Use Still backgrounds only: Settings > Wallpapers & Brightness> Choose Wallpaper
11) Fetch email instead of "Push": Settings > Mail, Contacts, Calendar > Fetch New Data >Push(off) & Fetch every 15 minutes
12) Disable LTE if needed: Settings > Cellular > Enable 4G/LTE (OFF)
13) Reduce Autolock: Settings > General > Auto-Lock > 1 Minute
14) Disable Vibrations with Ring: Settings > Sounds > Vibrate on Ring (off)
15) Close Applications regularly: Double Tap Home Button > Swipe up on App to close -
Hello, I restored my Iphone, and I made sure that all of my stuff was backed up into the Cloud. but now when i plug it into Itunes its like a brand iPhone PLZ help! Its an Iphone 4. I look ed on the account info and everything is right plz help!
Thank you again for all of your help!! I really appreciate it!
I think I am following -- I was able to upload to my iPhoto and all photos and videos are there that is a plus! I tried to create an Event in my iPhoto and put all of my photos in that event but for some reason, now my iTunes it not recognizing that Event in my iPhoto. It is not allowing me to import just that event at the moment but I may be doing something wrong. At least all of my pics and vids are in iPhoto so that is a plus and I know they are at least saved somewhere. Just for some reason, my iTunes it not locating the event that I created with only those photos.
Thank you for letting me know about my contacts! How do I know if I have the contacts app?
Also, I had no clue that my iCloud could be backed up via cellular data! However, is this a new feature with the most updated iOS?? Unforutnatly I am like 2 iOS updates behind because I don't have enough storage on my phone. I still get the notification that my phone needs to be plugged in and connected to wifi in order to back up to the cloud :-(
How can I sync using USB? Right now when i click on the info tab for my iPhone in my iTunes this is the answer that I get -- I am a little unclear as to what it means.
Sync Contacts:
Your contacts are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone
Sync Calendars:
Your calendars are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone -
Plz help me[need abap oo]
hi frnds,
i lose abap oo [siemens]materials. so now don't hav any oo material. if any hav abap objects materials [pdf format] pls send the link.... i need it immediately... i need ur help ... plz help me....Hi this may be of some help.
OOPs ABAP uses Classes and Interfaces which uses Methods and events.
If you have Java skills it is advantage for you.
There are Local classes as well as Global Classes.
Local classes we can work in SE38 straight away.
But mostly it is better to use the Global classes.
Global Classes or Interfaces are to be created in SE24.
SAP already given some predefined classes and Interfaces.
This OOPS concepts very useful for writing BADI's also.
So first create a class in SE 24.
Define attributes, Methods for that class.
Define parameters for that Method.
You can define event handlers also to handle the messages.
After creation in each method write the code.
Methods are similar to ABAP PERFORM -FORM statements.
After the creation of CLass and methods come to SE38 and create the program.
In the program create a object type ref to that class and with the help of that Object call the methods of that Class and display the data.
Example:
REPORT sapmz_hf_alv_grid .
Type pool for icons - used in the toolbar
TYPE-POOLS: icon.
TABLES: zsflight.
To allow the declaration of o_event_receiver before the
lcl_event_receiver class is defined, decale it as deferred in the
start of the program
CLASS lcl_event_receiver DEFINITION DEFERRED.
G L O B A L I N T E R N A L T A B L E S
*DATA: gi_sflight TYPE STANDARD TABLE OF sflight.
To include a traffic light and/or color a line the structure of the
table must include fields for the traffic light and/or the color
TYPES: BEGIN OF st_sflight.
INCLUDE STRUCTURE zsflight.
Field for traffic light
TYPES: traffic_light TYPE c.
Field for line color
types: line_color(4) type c.
TYPES: END OF st_sflight.
TYPES: tt_sflight TYPE STANDARD TABLE OF st_sflight.
DATA: gi_sflight TYPE tt_sflight.
G L O B A L D A T A
DATA: ok_code LIKE sy-ucomm,
Work area for internal table
g_wa_sflight TYPE st_sflight,
ALV control: Layout structure
gs_layout TYPE lvc_s_layo.
Declare reference variables to the ALV grid and the container
DATA:
go_grid TYPE REF TO cl_gui_alv_grid,
go_custom_container TYPE REF TO cl_gui_custom_container,
o_event_receiver TYPE REF TO lcl_event_receiver.
DATA:
Work area for screen 200
g_screen200 LIKE zsflight.
Data for storing information about selected rows in the grid
DATA:
Internal table
gi_index_rows TYPE lvc_t_row,
Information about 1 row
g_selected_row LIKE lvc_s_row.
C L A S S E S
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
handle_toolbar FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING
e_object e_interactive,
handle_user_command FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING e_ucomm.
ENDCLASS.
CLASS lcl_event_receiver IMPLEMENTATION
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_toolbar.
Event handler method for event toolbar.
CONSTANTS:
Constants for button type
c_button_normal TYPE i VALUE 0,
c_menu_and_default_button TYPE i VALUE 1,
c_menu TYPE i VALUE 2,
c_separator TYPE i VALUE 3,
c_radio_button TYPE i VALUE 4,
c_checkbox TYPE i VALUE 5,
c_menu_entry TYPE i VALUE 6.
DATA:
ls_toolbar TYPE stb_button.
Append seperator to the normal toolbar
CLEAR ls_toolbar.
MOVE c_separator TO ls_toolbar-butn_type..
APPEND ls_toolbar TO e_object->mt_toolbar.
Append a new button that to the toolbar. Use E_OBJECT of
event toolbar. E_OBJECT is of type CL_ALV_EVENT_TOOLBAR_SET.
This class has one attribute MT_TOOLBAR which is of table type
TTB_BUTTON. The structure is STB_BUTTON
CLEAR ls_toolbar.
MOVE 'CHANGE' TO ls_toolbar-function.
MOVE icon_change TO ls_toolbar-icon.
MOVE 'Change flight' TO ls_toolbar-quickinfo.
MOVE 'Change' TO ls_toolbar-text.
MOVE ' ' TO ls_toolbar-disabled.
APPEND ls_toolbar TO e_object->mt_toolbar.
ENDMETHOD.
METHOD handle_user_command.
Handle own functions defined in the toolbar
CASE e_ucomm.
WHEN 'CHANGE'.
PERFORM change_flight.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMETHOD.
ENDCLASS.
S T A R T - O F - S E L E C T I O N.
START-OF-SELECTION.
SET SCREEN '100'.
*& Module USER_COMMAND_0100 INPUT
MODULE user_command_0100 INPUT.
CASE ok_code.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
MODULE status_0100 OUTPUT.
DATA:
For parameter IS_VARIANT that is sued to set up options for storing
the grid layout as a variant in method set_table_for_first_display
l_layout TYPE disvariant,
Utillity field
l_lines TYPE i.
After returning from screen 200 the line that was selected before
going to screen 200, should be selected again. The table gi_index_rows
was the output table from the GET_SELECTED_ROWS method in form
CHANGE_FLIGHT
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines > 0.
CALL METHOD go_grid->set_selected_rows
EXPORTING
it_index_rows = gi_index_rows.
CALL METHOD cl_gui_cfw=>flush.
REFRESH gi_index_rows.
ENDIF.
Read data and create objects
IF go_custom_container IS INITIAL.
Read data from datbase table
PERFORM get_data.
Create objects for container and ALV grid
CREATE OBJECT go_custom_container
EXPORTING container_name = 'ALV_CONTAINER'.
CREATE OBJECT go_grid
EXPORTING
i_parent = go_custom_container.
Create object for event_receiver class
and set handlers
CREATE OBJECT o_event_receiver.
SET HANDLER o_event_receiver->handle_user_command FOR go_grid.
SET HANDLER o_event_receiver->handle_toolbar FOR go_grid.
Layout (Variant) for ALV grid
l_layout-report = sy-repid. "Layout fo report
Setup the grid layout using a variable of structure lvc_s_layo
Set grid title
gs_layout-grid_title = 'Flights'.
Selection mode - Single row without buttons
(This is the default mode
gs_layout-sel_mode = 'B'.
Name of the exception field (Traffic light field) and the color
field + set the exception and color field of the table
gs_layout-excp_fname = 'TRAFFIC_LIGHT'.
gs_layout-info_fname = 'LINE_COLOR'.
LOOP AT gi_sflight INTO g_wa_sflight.
IF g_wa_sflight-paymentsum < 100000.
Value of traffic light field
g_wa_sflight-traffic_light = '1'.
Value of color field:
C = Color, 6=Color 1=Intesified on, 0: Inverse display off
g_wa_sflight-line_color = 'C610'.
ELSEIF g_wa_sflight-paymentsum => 100000 AND
g_wa_sflight-paymentsum < 1000000.
g_wa_sflight-traffic_light = '2'.
ELSE.
g_wa_sflight-traffic_light = '3'.
ENDIF.
MODIFY gi_sflight FROM g_wa_sflight.
ENDLOOP.
Grid setup for first display
CALL METHOD go_grid->set_table_for_first_display
EXPORTING i_structure_name = 'SFLIGHT'
is_variant = l_layout
i_save = 'A'
is_layout = gs_layout
CHANGING it_outtab = gi_sflight.
*-- End of grid setup -
Raise event toolbar to show the modified toolbar
CALL METHOD go_grid->set_toolbar_interactive.
Set focus to the grid. This is not necessary in this
example as there is only one control on the screen
CALL METHOD cl_gui_control=>set_focus EXPORTING control = go_grid.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0200 INPUT
MODULE user_command_0200 INPUT.
CASE ok_code.
WHEN 'EXIT200'.
LEAVE TO SCREEN 100.
WHEN'SAVE'.
PERFORM save_changes.
ENDCASE.
ENDMODULE. " USER_COMMAND_0200 INPUT
*& Form get_data
FORM get_data.
Read data from table SFLIGHT
SELECT *
FROM zsflight
INTO TABLE gi_sflight.
ENDFORM. " load_data_into_grid
*& Form change_flight
Reads the contents of the selected row in the grid, ans transfers
the data to screen 200, where it can be changed and saved.
FORM change_flight.
DATA:l_lines TYPE i.
REFRESH gi_index_rows.
CLEAR g_selected_row.
Read index of selected rows
CALL METHOD go_grid->get_selected_rows
IMPORTING
et_index_rows = gi_index_rows.
Check if any row are selected at all. If not
table gi_index_rows will be empty
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines = 0.
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
EXPORTING
textline1 = 'You must choose a line'.
EXIT.
ENDIF.
Read indexes of selected rows. In this example only one
row can be selected as we are using gs_layout-sel_mode = 'B',
so it is only ncessary to read the first entry in
table gi_index_rows
LOOP AT gi_index_rows INTO g_selected_row.
IF sy-tabix = 1.
READ TABLE gi_sflight INDEX g_selected_row-index INTO g_wa_sflight.
ENDIF.
ENDLOOP.
Transfer data from the selected row to screenm 200 and show
screen 200
CLEAR g_screen200.
MOVE-CORRESPONDING g_wa_sflight TO g_screen200.
LEAVE TO SCREEN '200'.
ENDFORM. " change_flight
*& Form save_changes
Changes made in screen 200 are written to the datbase table
zsflight, and to the grid table gi_sflight, and the grid is
updated with method refresh_table_display to display the changes
FORM save_changes.
DATA: l_traffic_light TYPE c.
Update traffic light field
Update database table
MODIFY zsflight FROM g_screen200.
Update grid table , traffic light field and color field.
Note that it is necessary to use structure g_wa_sflight
for the update, as the screen structure does not have a
traffic light field
MOVE-CORRESPONDING g_screen200 TO g_wa_sflight.
IF g_wa_sflight-paymentsum < 100000.
g_wa_sflight-traffic_light = '1'.
C = Color, 6=Color 1=Intesified on, 0: Inverse display off
g_wa_sflight-line_color = 'C610'.
ELSEIF g_wa_sflight-paymentsum => 100000 AND
g_wa_sflight-paymentsum < 1000000.
g_wa_sflight-traffic_light = '2'.
clear g_wa_sflight-line_color.
ELSE.
g_wa_sflight-traffic_light = '3'.
clear g_wa_sflight-line_color.
ENDIF.
MODIFY gi_sflight INDEX g_selected_row-index FROM g_wa_sflight.
Refresh grid
CALL METHOD go_grid->refresh_table_display.
CALL METHOD cl_gui_cfw=>flush.
LEAVE TO SCREEN '100'.
ENDFORM. " save_changes
chk this blog
/people/vijaybabu.dudla/blog/2006/07/21/topofpage-in-alv-using-clguialvgrid
with regards,
Hema SUndara. -
HT2534 My Apple ID is not working.....plz help
My Apple ID is not working I made it yesterday using my PC .......plz help.......
Try sign in to iTunes and App Store
Settings>iTunes and App Store>Apple ID -
I created an iCloud account and also had to get more space so after I have made the purchase, I am unable to backup my phone! I have a stable wifi connection at home and all I see for hours and hours is "Backing Up .. Estimating time remaining"!!!!! Plz help I'm unable to make the backup as I need to transfer all my data on my new iPhone 5S
This may be caused by a corrupt existing backup that needs to be deleted, or by data on your device that is causing the backup to fail. To troubleshoot these, try deleting your last iCloud backup (if you have one) by turning off iCloud Backup in Settings>iCloud>Storage & Backup, then tap Manage Storage, tap your device under Backups, then tap Delete Backup. Then go back and turn iCloud Backup back on and try backing up again.
If it still won't back up, you may have an app or something in your camera roll that is causing the backup to fail. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If the backup is successful, then the camera roll and/or one of your apps is causing the backup to fail and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.
In the meantime you can back up your phone to your computer by connect it, opening iTunes and going to File>Devices>Back Up. Also be sure to transfer your purchases (File>Devices>Transfer Purchases). Then set up your new phone and when given the option, choose Restore from iTunes Backup and follow the prompts to restore this backup to your new phone. This will be much faster than using iCloud anyway. -
when i am copy the vi that is in find example>fuzzy>fuzzyEx with pi control the follwing error occuring
'error 1430 occured at open/create/replacefile in NI Fuzzy logic API.LVLIB FL LOAD FUZZY SYTEM.vi
untitel 3 possible reason the pat is empty or relative you must se use an absolute patth <not apath>
plz help me i only want that i can copy this vi in new vi but when i do so the above error occur and fuzzy logic cotroller is highlitedHello Nofil,
This is probably happening because you have made a copy of the VI without changing the name/ location on the disc. I have saved a copy of the VI for you, it is in LabVIEW 2010 SP1, please ask if you want this in a previous version.
Regards
Andrew George @ NI UK
Attachments:
Fuzzy Tanks with PI.vi 31 KB -
C Apple, i need to know few things,first of all i shall tell my scenario. I got an iphone 3gs from my uncle in US..after long waiting. I m from south india, living at God's country called Kerala k. well , in that iphone it showing activation screen and trying to activate. not more than that..plz help!
means.. in simple words, it is trying to activate and all( searching wifi,, taking few minutes..again searching...if it couldnt find any wifi - telling .. try connect using itunes an all)...well any way. finally I try connect to a wifi network, with full speed...3mbps..from Ravi's internet cafe in downtown.
All after Im getting the below message from that white candy box!( thats all I can use now, because, in my dreams iPhone is something great, that mankind ever seen....but this really disappointed me......im simpling blinking!!(same with itunes too)
""Your iphone could not be activated because the activation server is temporarily unavailable. try connecting your iphone to itunes to activate it, or try again in a couple of minutes.
If this problem persists, contact apple support at apple.com/support""
EVERYDAY .EVERTIME.. I C this message and sleep....no use.....and i use to charge that 'white candy box' to c this message!
I try searching internet and all for solutn...but no one knw about it..but there are...some one me abt method called jailbreaking ..rednw..white snw ..ultrasnw and all...I dnt knw why it is so complicated to troublesht...apple is suppose to be simple and friendly.
C why u manufacturing these stuffz like this, if does'nt serve the any of its purpose ....or useable to any of its features atleast....C i wont be that disapppointed, if u put an option to playbck music or video during activation and all...
If you are responsible for manfacturing such unuseable thing, then its ur responsible to destroy it too.....
anyway now everyone knws that ..I have an apple iphone with me, but that doest make me proud at all...
Finally I have only few questions to ask...
1 will it work with my vodafone sim in kerala?
2 is any way , i can hear any music out frm it?
3 will i become a proud iPhone user?
I am already fedup with asking questions..begging for an solution.....
I hope so you can help to figure it out, without any complications....thank u!It was not legitimately unlocked by the carrier it was originally locked to. ONLY the carrier it is locked to can authorize unlocking it.
In order to allow it to be used on a different carrier, the phone was hacked or jailbroken. An unauthorized modification was made to the phone. That modification has damaged the phone. You can not get support for it here or from Apple. -
Urgent plz help me......plz
Am very nem to jsp.
am doing my final year project in jsp.
I want to retreive value in the textbox depending on the selectino made in the dropdown.
in the dropdown menu i retrieve employee id frm backend. n in the textbox i shuld get employee name depending on the selection made in the dropdown list. that is data in the textbox shuld change depending on the selectin made in dropdown.
here is my code which i tired but in the textbox the value is alwys remaning the last record value n it is not changing depending on slectino made in dropdwon list
<%@ page import="java.util.*" %>
<%@ page language="java" %>
<%@ page import="java.sql.*" %>
<HTML>
FAQ
Category choice
<FORM ACTION="selection.jsp" METHOD="POST">
<%
String nameselection = null;%>
<SELECT NAME="Category" id= Category >
<%
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection conn=DriverManager.getConnection("jdbc:odbc:man","scott","tiger");
Statement statement = conn.createStatement();
ResultSet rs = statement.executeQuery("SELECT DISTinCT empid FROM employee" );%>
<OPTION VALUE='nochoice'>Please choose a category</OPTION>";
<%while(rs.next()) {
nameselection = rs.getString("empid");%>
<OPTION value ="optcategory"><%out.println(nameselection);%>
</OPTION>
<% } %>
</SELECT>
Question selection
<%
String password = null;%>
<%ResultSet m1 = statement.executeQuery("SELECT * FROM employee WHERE empid = ( '" + nameselection + "')");
String mm1;
while(m1.next()){%>
<input type =text name=mm value="<%= m1.getString(2) %>">
<%}%>
</FORM>
</HTML>
plz help me....
am very new to it.
Thanx in advancehi manisha
good try & sorry for late reply
To say the truth i'm too new to jsp
i'll give u my code see it for reference.. if u have any doubts in that pls don't forget to ask me
function display()
var index=document.form1.drug.value;
document.form1.hid.value=index;
form1.submit();
function refresh()
var indexOfcombobox = document.form1.drughid.value;
sel = document.form1.drug;
for (i=0; i<sel.options.length; i++) {
if (sel.options.text ==indexOfcombobox ) {
sel.selectedIndex = i;
<form name="form1" method="post" action="">
<body onload="refresh() ">
<select name="drug" id="drug" value="hid" onChange="display()">
<option value="" selected> </option>
<%
while(rs.next())
%>
<OPTION VALUE="<%=rs.getString("DrugName")%>"><%=rs.getString("DrugName") %></OPTION>
<%
%>
</select>
<input type="hidden" name="hid">
</div></td>
</tr>
<tr>
<td>NDC code #</td>
<td>
<%
//query for selecting the values from the database
String sql1 = "SELECT ProductCode,DrugName,Dosageform from ProductMaster where DrugName='"+request.getParameter("hid")+"' ";
rs=stm.executeQuery(sql1);
%>
<% while (rs.next())
String val1=rs.getString("ProductCode");
String val2=rs.getString("DrugName");
String val3=rs.getString("Dosageform");
out.println (val1 +"</td>");
out.println ("<input type=hidden name=ndc value='" + val1 + "'>");
out.println ("<input type=hidden name=drughid value='" + val2 + "'>");
out.println("<td>Dosageform : "+val3);
}Regards
kalai -
Hi ive used spryware ive used normal typing but my navigation bar is awful how can i can create a good one ?
Another thing is ive made the spyware navigation menu bar horizontal but when i load it up on my ftp files for the internet it ends up going vertical with bullet points, plz help.........
In my dreamweaver it previews like its suppose to be but when i load it on the internet public html it doesnt show it horizontally.
thanks for anyone who can help
Ive also attached the fileDid you upload your CSS and javascript files to the server? We would need to see a link to your live page on server to give more meaningful feedback.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb -
Respected Sir/madem'
i m new to java.So i don't know how can i handle this problem.plz guide me
my problem is i m using mysql connector to access my database and made the class (MyConnection.class) that establish the connection but i do not want to give my class that establish a connection to client. i have to store this class on the server for security and use this class in my program to connect to database.
How can i use class or any file that was stored on server.
Plz help me i don,t know what ccn i do.Chipomasi wrote:
How do i delete my chat history.
Please help.
Hi @Chipomasi,
You can delete your Chat history by going to Tools>Options in the desktop client; click on the IM and SMS tab; click on IM settings; then show advanced settings; then you can clear the history and modify how long chat history goes back.
Note that this will not delete the other user's chat history with you, only yours.
Anthony
This post was by Anthony- I do not work for Microsoft!
If this solved your issue - Mark it as a solution! If you like my post - Please add Kudos!
Spotify Community Profile - Anthony
Feel free to PM me - Here -
recent i added an custom domain on my blogspot site as www.allfreeebooks.net
but on my browser this site not showing as direct url . loading loading then spot that page .
i can access my blogspot account , can post too . but when i try to see my page on my browser not opening and cant see .
Note : with pagewash can see page . but direct with url my site cant see . and not opening .
sometimes can see for few min after then same problem
plz help me ...
one more .. not opening any blogspot site on my web browser. i have removed cookies , tried with everything .. but nothing happened .
plz helpIf you previously used a different domain for that website then Firefox may still have old content in the cache.
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
You can remove all data stored in Firefox from a specific domain via "Forget About This Site" in the right-click context menu of an history entry ("History > Show All History" or "View > Sidebar > History") or via the about:permissions page.
Using "Forget About This Site" will remove all data stored in Firefox from that domain like bookmarks, cookies, passwords, cache, history, and exceptions, so be cautious and if you have a password or other data from that domain that you do not want to lose then make a note of those passwords and bookmarks.
You can't recover from this 'forget' unless you have a backup of the involved files.
It doesn't have any lasting effect, so if you revisit such a 'forgotten' website then data from that website will be saved once again. -
pl help me i want to import a dmp file but i recevied such type of
error. plz help me
Connected to: Oracle8i Enterprise Edition Release 8.1.5.0.0 - Production
With the Partitioning and Java options
PL/SQL Release 8.1.5.0.0 - Production
Export file created by EXPORT:V08.01.05 via conventional path
Warning: the objects were exported by DBC, not by you
import done in WE8ISO8859P1 character set and WE8ISO8859P1 NCHAR character set
. . importing table "FACULTY"
IMP-00058: ORACLE error 911 encountered
ORA-00911: invalid character
. . importing table "FACULTY_ADM"
IMP-00058: ORACLE error 911 encountered
ORA-00911: invalid character
. . importing table "FEE"
IMP-00058: ORACLE error 911 encountered
ORA-00911: invalid character
. . importing table "ISTANNUAL"
IMP-00058: ORACLE error 911 encountered
ORA-00911: invalid character
. . importing table "SNDANNUAL"
IMP-00058: ORACLE error 911 encountered
ORA-00911: invalid character
. . importing table "STUDENTS"
IMP-00058: ORACLE error 911 encountered
ORA-00911: invalid character
. . importing table "TIME"
IMP-00058: ORACLE error 911 encountered
ORA-00911: invalid character
. . importing table "TIMETABLE"
IMP-00058: ORACLE error 911 encountered
ORA-00911: invalid character
Import terminated successfully with warnings.Was the export file made on the same platform as the import is being ran on? If not, was a BINARY ftp used to copy the file between platforms? If one of the two platforms is Windows while the other is UNIX then the ascii ftp corrupted the file. Re-transmit it using a binary ftp and try again.
What version of the database was used to make the export? It must be the same or lower than the version being used to perform the import.
These are two of the most common problems. Hopefully one of them is the one you have.
HTH -- Mark D Powell --
Maybe you are looking for
-
Delivery report vanishes automatically
I am using 5530xm, whenever I send a text msg, the delivery report stays in the memory till the msg delivery is pending, but as soon as it gets delivered, it vanishes, pls help....(THese reports are very important for me) Ronnie
-
How do I Download Additional Content
Hi...I've got a MacBook Pro running OS X Mountain Lion fully patched and updated. I'm not usually a Mac user but I'm fairly comfortable with it when I do...I know enough to be a Power User. I purchased/downloaded Mainstage 3 today. It prompted me aft
-
Help! I have been using Garageband since version 1 came out, and I have finally gotten to the point where I can't stand the sound of my songs when they are exported to Itunes. Is there a way to keep the initial integrity of my songs when converting t
-
Save dialogs no longer allow remote locations
I used to be able to save files to remote (SFTP, in this case) locations using the save dialogs of Firefox, Thunderbird, Google Chrome, etc. The SFTP locations are mounted through Nemo (therefore, by GVFS, I presume). This changed sometime this week
-
Grey screen of death...well...annoyance.
I need some help on this. I don't know what happened, but I restarted my computer one day and the loading siplay had this dark grey shadow appear that said I needed to restart my computer. So I did, and it came up again. It keeps coming up everytime