Plz help with scripting in adobe....urgent

Hi,
I have a requirement to display two company codes on two different master pages depending upon the company code .Here company code is the input .Shall i use scripting here or we can handle in print program.
as i am new to this adobe ,i want to know about ,
1.How to use CONDITIONS.
2.KEYWORDS.
3.GIVE ME A SAMPLE CODE WITH EXPLANATIONS.

Hi
look at the Adobe page here in SDN:
https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=AdobeForms.htm
Check these links on Adobe forms
http://help.sap.com/saphelp_nw04/helpdata/en/1e/05853ff8ec2c17e10000000a114084/content.htm
https://www.sdn.sap.com/irj/sdn/interactiveforms
http://www.sap.com/solutions/solutionextensions/pdf/BWP_Interactive_Forms_Adobe.pdf
It contains lots of useful information, documentation, and e-learning materials teaching you the basics.
Reward points for useful Answers
Regards
Anji

Similar Messages

Plz help me TEXTPOOL PROBLEM(VERY URGENT)

hi experts,
plz help in resolving this issue this is very urgent.
error is
The line type of "RPOOL" must be compatible with one of the types
"TEXTPOOL".
and its coming in :
FORM GET_SELSCREEN_TITLE TABLES P_SCREENS STRUCTURE DYNNR.
DATA: BEGIN OF RPOOL OCCURS 20,
ID(1),
NAME(8),
TEXT(80),
END OF RPOOL.
READ TEXTPOOL RSVAR-REPORT LANGUAGE SY-LANGU INTO RPOOL.
plz help me.

Hi !
Try this :
DATA RPOOL LIKE TEXTPOOL OCCURS 0 WITH HEADER LINE.
Reward if usefull,
Regards,
Stéphane.

Help with Scripting forms when additional characters added

Hi,
I am new to scripting in adobe professional, I thank anyone in advance for any advice or help they can give me.
I am trying to use the calcuations within the forms that I am putting fields onto. In the process I discovered that the program the forms are within are attaching a pipe and additional characters after the actual name that I have named them. So, I am not able to use even the simple calculations within adobe to "sum" fields.   For example: I named the field "1_1Text" and this is what displays when you go into the calculations and pick the fields you want. But the actual name is "1_1Text|1234567" so the calculations will not work.
I take it then I need to use the advanced scripting but I am unsure of the format for a routine such as this. I have a little knowledge of javascript but it has been awhile. There must be a scan to find the pipe and then you should be able to chop off the extra characters since I will never know the characters the program adds on so then I can do calculations on these fields. Then you would have to put them into an array or something to save them?   Any help with a script or hints would surely be appreciated.
Thanks!

Could explain more fully how you are creating your forms and what programs you are using from the creation of the base document to which program and how you are adding fields.
I think you are misunderstanding me.   I use Adobe Acrobat Professional 6.0. I can get the calculations to work correctly if I use the form as it is after creating it.
But these forms are put into an SQL database and they get selected within a VB.net program or ASP.net program (both are used). So these programs (VB.net or ASP.net) are adding the extra characters at the end, hence I do not know the names of the fields when the forms are being filled in. So the calculations do not work with the "original names" that I created for the fields.
I just figured if I created a routine that looped through and chopped off the extra characters these programs put on the end I would be able to do the calcuations and they would work. I believe there is a substring operation within javascript.

Doesnt allow me to choose pressure in the brush properties plz help with pic

Hi, I have a problem in adobe illstrator CS4
it doesnt allow me to choose pressure or other properties in the brush properties it only allows me choose Fixed and Variable and it makes the colour of othe words like pressure silver so i cant select it from the menu and here is a picture for the problem
PLEEEEEEEEEEAAAAAAAAAAAAASE help me i really need to know how to solve this problm and by the way i tried on the same computer with windows xp and windows 7 but the problem remains

i dont have a tablet i ink with the mouse and i see in video tutorials when u ink sketches after u scan them on the computer and the dont say that u must have a tablet like in this video
http://www.youtube.com/watch?v=DM96tEAnbGs
plz help me

Plz help me out bapi message (urgent)

hi
i need help. i m passing values in bapi n taking message from table in bapi to print in out put.
requirment is..
a)     Pass the following parameters:
NUMBER = NETWORK
Tables: I_COMPONENTS_CHANGE
     COMPONENT = IT_COMP-COMPONENT
     BATCH = P_CHARG
Tables: I_COMPONENTS_CHANGE_UPDATE
     COMPONENT = IT_COMP-COMPONENT
     BATCH = X
b)     The components that failed update are provided in table, E_MESSAGE_TABLE. If MESSAGE_TYPE = E, get EXTERNAL_OBJECT_ID and MESSAGE_TEXT. Remove spaces from EXTERNAL_OBJECT_ID and then match against IT_COMP-COMPONENT to get MATERIAL, PLANT and NETWORK and write MATERIAL, PLANT and NETWORK and MESSAGE_TEXT to the job log.
so for that i m doing coding like (this is part of my program)
LOOP AT i_temp_comp.
    CLEAR : i_comp_change,i_comp_upd,i_e_msg.
    REFRESH : i_comp_change,i_comp_upd,i_e_msg.
    LOOP AT i_comp WHERE network = i_temp_comp-network.
      l_number = i_comp-network.
      i_comp_change-component = i_comp-component.
      i_comp_change-batch = p_charg.
      APPEND i_comp_change.
      i_comp_upd-component = i_comp-component.
      i_comp_upd-batch = c_x.
      APPEND i_comp_upd.
    ENDLOOP.
    CALL FUNCTION 'BAPI_NETWORK_COMP_CHANGE'
      EXPORTING
        number                     = l_number
      TABLES
        i_components_change        = i_comp_change
        i_components_change_update = i_comp_upd
        e_message_table            = i_e_msg.
    IF NOT i_e_msg[] IS INITIAL.
      LOOP AT i_e_msg.
        IF i_e_msg-message_type = c_e.
          READ TABLE i_comp WITH KEY network = l_number
     component = i_e_msg-external_object_id.       "#EC *
            IF sy-subrc IS INITIAL.
              i_output-material = i_comp-material.
              i_output-plant = i_comp-plant.
              i_output-network = i_comp-network.
              i_output-message = i_e_msg-message_text.
              APPEND i_output.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDLOOP.
    ELSE.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    ENDIF.
ENDLOOP.
problem is it is not showing message in i_output.
so no data is printing.
plz help me out

There are several IFs in your code here.
IF NOT i_e_msg[] IS INITIAL.
LOOP AT i_e_msg.
    IF i_e_msg-message_type = c_e.
      READ TABLE i_comp WITH KEY network = l_number
          component = i_e_msg-external_object_id. "#EC *
      IF sy-subrc IS INITIAL.
        i_output-material = i_comp-material.
        i_output-plant = i_comp-plant.
        i_output-network = i_comp-network.
        i_output-message = i_e_msg-message_text.
        APPEND i_output.
      ENDIF.
    ENDIF.
ENDLOOP.
ELSE.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.
It can be any IF failure. Check in debugging and see how this "i_e_msg" internal table is filled. May be the return table is giving the component number in external format and you have it in internal format or vice-versa in the READ statement "component = i_e_msg-external_object_id".

Help with N8 and Adobe Premiere?

Hi, I am using Adobe Premiere Pro CS4 v4.1.0.
I recently got a Nokia N8 and am now trying to edit the video recordings, but am having some problems.
The phone records at 25fps 1280x720 using H.264 MPEG-4 codec, with sound in Stereo 130kbps 48 kHz.
When I create a project and load the .mp4 file into it, the first problem I see is that it reads it as 500fps and the video is only a second or 2 long.
I then interpret the footage to the correct 25fps, and the video then works fine. However, the sound seems to not be there.
I've noticed that due to Premiere interpreting it as 500fps, it thus only plays the first second or two of the sound when left as 500fps and plays all the video in that second or two, and thus when changing to the correct 25fps, it is therefore only the two seconds playing over the entire minute of video.
I also tried changing the file into other formats. The only other one that kind of worked was .mov. It allowed the sound to work perfectly, the video loaded at correct frames, however, when playing the video on premiere, it then showed black screen for most of the clip.
Have tried to find out about this online and installed a couple different codec packs and media players, but nothing helped with this problem in Adobe Premiere. However, the clip played fine in the media players, such as RealPlayer.
If anyone has any advice on this, it would be appreciated. I would prefer to fix this issue correctly rather than have to manually interpret or transcode the footage each time I want to edit it.
Btw, I also posted this question on a forum with Nokia N8 Users, and others also tried it out and had same or similar issues. They also tried on CS5 and it still didn't work.
*UPDATE* I just tested again to change the file from .mp4 to .mov by simply renaming it, and this time it loaded perfectly into Premiere. However, I have to do this on my XP computer, as my Windows 7 doesn't change the format of file by simply renaming it. Hence, I would still like help with getting it to recognise the .mp4 correctly though in the first place, rather than having to rename my files each time on the XP computer.

Moshpit84 did you utilize the uninstallers located in Applications/Utilities/Adobe Installers to remove your installation of Premiere Pro? Also what version of the Adobe Application Manager are you currently using?

Cursor postion with scripting in Adobe LiveCycle ES

Hi,
I have a textfield that populates editable text when we click pdf preview. when I tab the cursor moves to the end of the pharagraph. we are using some screen readers that reads the text. Our requirement is to bring the cursor at the begining of the text when tabbed.
Is it possibe to bring the cursor at the begining of text with scripting.
please post the steps if possible.
Your help on this would be highly appriciated.
Thanks,
Ramesh Punugubati.

Hello Jasmin
The "Results" variable need to declared out of the try and catch block, otherwise it won't be recognized when it comes to "close" at the end.
Here is a modified version of your script.
Greetings,
Yasser
import java.sql.Connection;
import java.sql.PreparedStatement;
import java.sql.Statement;
import java.sql.ResultSet;
import javax.sql.DataSource;
import javax.naming.InitialContext;
import java.sql.CallableStatement;
CallableStatement proc_stmt = null;
InitialContext context = new InitialContext();
Connection connection = ((DataSource)context.lookup("java:/IDP_DS")).getConnection();
proc_stmt = connection.prepareCall("{ call CalculateTotal() }");
ResultSet results;
try
results = proc_stmt.executeQuery();
if (results.next())
patExecContext.setProcessDataStringValue("/process_data/@Total",results.getString(1));
catch(Exception ex)
ex.printStackTrace();
results.close();
proc_stmt.close();
connection.close();

PLZ HELP SAP SCRIPT ISSUE (DYNAMIC BOX)

Hi all
I want to include a dynamic text (means number of lines can vary) inside a box .
please guide me how i can create this box whose size would be dynamic according to this text.
plz help i am not able to find ne solution
Thanx in advance
Edited by: SARABPREET CHADHA on Mar 14, 2008 11:33 AM

Following things to be done in Driver program.
CALL FUNCTION 'READ_TEXT'
    EXPORTING
      ID              = TEXT_ID
      LANGUAGE        = PRINT_LANGUAGE
      NAME            = TEXT_NAME
      OBJECT          = TEXT_OBJECT
    IMPORTING
      HEADER          = TABLE_HEADER
    TABLES
      LINES           = TABLE_LINES
    EXCEPTIONS
      ID              = 01
      LANGUAGE        = 02
      NAME            = 03
      NOT_FOUND       = 04
      OBJECT          = 05
      REFERENCE_CHECK = 06.
then
CALL FUNCTION 'WRITE_FORM_LINES'
    EXPORTING
      HEADER    = TABLE_HEADER
      WINDOW    = WINDOW
    IMPORTING
      FROMPAGE = FROMPAGE       " not interested ?
    TABLES
      LINES     = TABLE_LINES
    EXCEPTIONS
      FUNCTION = 01
      TYPE      = 02
      UNOPENED = 03
      UNSTARTED = 04
      WINDOW    = 05.
and then in sap script.
/:           INCLUDE &THEAD-TDNAME& OBJECT &THEAD-TDOBJECT& ID &THEAD-TDID&
/:           PARAGRAPH T6 LANGUAGE
Your text will apper in sapscript.
Award points if useful...

Plz help with a java app

Dear experts,
I have a java application in form of a running thread that periodically does an activity ie running a BAPI in
SAP.I like to schedule this application at evening time.
Problem is that incase somebody remotely login to this Windows server using RDP and leave an open RDP session,
two instance starts one on RDP and other on console.
Now to overcome this problem i devised a solution myself that incase application detects session is remote
then it should exit itself. This is mentioned in forum undergiven.
http://forums.sun.com/thread.jspa?threadID=5410674&messageID=10835701#10835701
My perception behind carrying out this development was that incase session starts in remote then
app will automatically close and finally letting running only in console.
Now what happens is that scheduled task doesnot start at all on console ,incase console as well as RDP are open.
Instead it starts only on RDP failing instantly.So in nutshell,task doesnot start at all.My app log say that
service tried to open in remote session and got closed.Plz help as i have no way out.
My second question is that if i schedule task using RDP on remote server,will it run on Remote,console or both
of them.
Regards,
Aditya.

Adi1000 wrote:
My app also generates a .lock file and make sure that only one instance is running.Still problem remains unresolvedAnd combining your other thread with the word "also" from this post just exacerbates your "problem". Also, the "lock" file was not to prevent two simulteneous runs (that leads to very distasteful race condition), but rather to prevent two runs within a set period of time when combined with the ServerSocket approach to prevent simulteneous runs.

Plz help with deploying applet that uses SSL

Hi, maybe this is not the adecuate forum but ive already tried in others and i got no answer.
Im trying to use a certificate with my applet ( tha sends a lot of info to the server and also connects to another hibernate db) but im getting this error:
Server side:
username is: Panda
Registered the SSLServerSocket on port 6969
Listening ....
---- Got a connection from a client
     this is an unknown client
!!!!!!Error in reading or writing from/to the client:
javax.net.ssl.SSLException: Connection has been shutdown: javax.net.ssl.SSLHandshakeException: Received fatal alert: certificate_unknown
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.checkEOF(Unknown Source)
     at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
     at sun.nio.cs.StreamDecoder$CharsetSD.readBytes(Unknown Source)
     at sun.nio.cs.StreamDecoder$CharsetSD.implRead(Unknown Source)
     at sun.nio.cs.StreamDecoder.read(Unknown Source)
     at java.io.InputStreamReader.read(Unknown Source)
     at java.io.BufferedReader.fill(Unknown Source)
     at java.io.BufferedReader.readLine(Unknown Source)
     at java.io.BufferedReader.readLine(Unknown Source)
     at PaqueteServidor.Server$handleRequest.run(Server.java:130)
Caused by: javax.net.ssl.SSLHandshakeException: Received fatal alert: certificate_unknown
     at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Unknown Source)
     at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Unknown Source)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.recvAlert(Unknown Source)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(Unknown Source)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.getSession(Unknown Source)
     at PaqueteServidor.Server.printClientCerts(Server.java:47)
     at PaqueteServidor.Server.run(Server.java:100)
javax.net.ssl.SSLException: Connection has been shutdown: javax.net.ssl.SSLHandshakeException: Received fatal alert: certificate_unknown
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.checkEOF(Unknown Source)
     at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
     at sun.nio.cs.StreamDecoder$CharsetSD.readBytes(Unknown Source)
     at sun.nio.cs.StreamDecoder$CharsetSD.implRead(Unknown Source)
     at sun.nio.cs.StreamDecoder.read(Unknown Source)
     at java.io.InputStreamReader.read(Unknown Source)
     at java.io.BufferedReader.fill(Unknown Source)
     at java.io.BufferedReader.readLine(Unknown Source)
     at java.io.BufferedReader.readLine(Unknown Source)
     at PaqueteServidor.Server$handleRequest.run(Server.java:130)
Caused by: javax.net.ssl.SSLHandshakeException: Received fatal alert: certificate_unknown
     at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Unknown Source)
     at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Unknown Source)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.recvAlert(Unknown Source)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(Unknown Source)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.getSession(Unknown Source)
     at PaqueteServidor.Server.printClientCerts(Server.java:47)
     at PaqueteServidor.Server.run(Server.java:100)
Client side:
javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
     at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Unknown Source)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(Unknown Source)
     at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Unknown Source)
     at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Unknown Source)
     at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(Unknown Source)
     at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(Unknown Source)
     at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Unknown Source)
     at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Unknown Source)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(Unknown Source)
     at sun.net.www.protocol.https.HttpsClient.afterConnect(Unknown Source)
     at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
     at Interfaz.InterfazMovil.init(InterfazMovil.java:89)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
     at sun.security.validator.PKIXValidator.doBuild(Unknown Source)
     at sun.security.validator.PKIXValidator.engineValidate(Unknown Source)
     at sun.security.validator.Validator.validate(Unknown Source)
     at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(Unknown Source)
     at com.sun.net.ssl.internal.ssl.JsseX509TrustManager.checkServerTrusted(Unknown Source)
     ... 14 more
Caused by: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
     at sun.security.provider.certpath.SunCertPathBuilder.engineBuild(Unknown Source)
     at java.security.cert.CertPathBuilder.build(Unknown Source)
     ... 19 more
19:40:34,444 INFO Environment:464 - Hibernate 3.0.5
19:40:34,444 INFO Environment:477 - hibernate.properties not found
19:40:34,444 INFO Environment:510 - using CGLIB reflection optimizer
19:40:34,454 INFO Environment:540 - using JDK 1.4 java.sql.Timestamp handling
19:40:34,645 INFO Configuration:1110 - configuring from resource: /bd/hibernate/hibernate.cfg.xml
19:40:34,645 INFO Configuration:1081 - Configuration resource: /bd/hibernate/hibernate.cfg.xml
19:40:35,045 ERROR XMLHelper:59 - Error parsing XML: /bd/hibernate/hibernate.cfg.xml(21) The content of elements must consist of well-formed character data or markup.
19:40:35,045 ERROR Configuration:1172 - problem parsing configuration/bd/hibernate/hibernate.cfg.xml
org.dom4j.DocumentException: Error on line 21 of document : The content of elements must consist of well-formed character data or markup. Nested exception: The content of elements must consist of well-formed character data or markup.
     at org.dom4j.io.SAXReader.read(SAXReader.java:482)
     at org.hibernate.cfg.Configuration.doConfigure(Configuration.java:1168)
     at org.hibernate.cfg.Configuration.configure(Configuration.java:1112)
     at bd.hibernate.HibernateUtil.currentSession(HibernateUtil.java:51)
     at bd.controlador.CLetrero.ListarLetreros(CLetrero.java:45)
     at Interfaz.InterfazMovil.init(InterfazMovil.java:126)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Nested exception:
org.xml.sax.SAXParseException: The content of elements must consist of well-formed character data or markup.
     at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
     at org.dom4j.io.SAXReader.read(SAXReader.java:465)
     at org.hibernate.cfg.Configuration.doConfigure(Configuration.java:1168)
     at org.hibernate.cfg.Configuration.configure(Configuration.java:1112)
     at bd.hibernate.HibernateUtil.currentSession(HibernateUtil.java:51)
     at bd.controlador.CLetrero.ListarLetreros(CLetrero.java:45)
     at Interfaz.InterfazMovil.init(InterfazMovil.java:126)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
%%%% Error Creating SessionFactory %%%%
org.hibernate.HibernateException: problem parsing configuration/bd/hibernate/hibernate.cfg.xml
     at org.hibernate.cfg.Configuration.doConfigure(Configuration.java:1173)
     at org.hibernate.cfg.Configuration.configure(Configuration.java:1112)
     at bd.hibernate.HibernateUtil.currentSession(HibernateUtil.java:51)
     at bd.controlador.CLetrero.ListarLetreros(CLetrero.java:45)
     at Interfaz.InterfazMovil.init(InterfazMovil.java:126)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: org.dom4j.DocumentException: Error on line 21 of document : The content of elements must consist of well-formed character data or markup. Nested exception: The content of elements must consist of well-formed character data or markup.
     at org.dom4j.io.SAXReader.read(SAXReader.java:482)
     at org.hibernate.cfg.Configuration.doConfigure(Configuration.java:1168)
     ... 6 more
java.lang.NullPointerException
     at bd.hibernate.HibernateUtil.currentSession(HibernateUtil.java:59)
     at bd.controlador.CLetrero.ListarLetreros(CLetrero.java:45)
     at Interfaz.InterfazMovil.init(InterfazMovil.java:126)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Plz help and thx in advance.

I know I didn't get round to replying but no need to post it so many times.
http://forum.java.sun.com/thread.jspa?threadID=666870
http://forum.java.sun.com/profile.jspa?userID=543817
http://forum.java.sun.com/thread.jspa?threadID=669965
http://forum.java.sun.com/profile.jspa?userID=543817
http://forum.java.sun.com/thread.jspa?threadID=669975
http://forum.java.sun.com/thread.jspa?threadID=669973
Could it be that the server and client need to open different keystores?
http://forums.java.sun.com/thread.jspa?threadID=573918&messageID=3272683
reply 7
My example given before should work on different machines, try to export the server key and import it into the
client keystore. Export the client key and import in the server keystore if you want the server to authenticate
the client.
http://forum.java.sun.com/thread.jspa?threadID=666870
reply 4
Check the method getSSLSocketFactory in the applet, that will open a keystore for you.

Plz Help With Nokia 5800 XM ...... Plz

Hi everyone,
I have nokia 5800 and i like it very much... But i have a problem with it ..... the problem that when i download any thing from nokia OVI Store from my mobile like: Games, apps and videos when download finished and starting to install the games or the apps it's say's: "installation failed" and when i redownload it again nothing change and keep saying "installation failed" ........ and i noted that when i install app ( themes, apps and games ) on my mobile by ovi suite or by file manager it also say's to me "Expired Certificat" even if i signed this apps but it alwyas say's "Expired Certificat"....... for this problem i did: hard reset - format my mobile - format my sd card - update my mobile to v40 - but the problem never stops to return in a few hours ..... then i find out that when i need to install any app on my mobile (by ovi suite or ovi store in my mobile or file manager) i have to switch off the mobile and turn it on again to install what ever i want ...... so Plz help me out
PS: 1- I have 2 friends having the same problem that i have and they did what i did
2- my mobile software v. when the problem stated v31
3- my memory card 8 GB the orginal one
Thanx and Please Tell Me What to Do
Bye

Option 1
NOTE
- YOU CAN ONLY INSTALL SIGNED APPLICATION WITH THIS METHOD.
- IF YOU DONT TAKE BACKUP OF YOUR DATA OR FOLLOW THE EXACT STEPS HERE YOU WILL LOSS ALL DATA.
1. With the phone switched on, press the power button key once.
2. Scroll down to and select "Remove E: Memory Card".
3. Select Yes to remove the memory card.
4. Press OK and remove memory card from phone.
5. Press the Dialler on the main screen.
6. Type *#7370#
7. Enter security code. Default is 12345 unless it has been changed.
8. The phone will reset, wait for this to complete and power back on.
9. Select your country and type in the correct time and date.
10. Wait for the phone to complete its configurations, you may receive "My Nokia" or tutorial messages.
11. Power off phone.
12. Insert the memory card.
13. Power on the phone.
14. Wait for the phone to install any pre-loaded content from the memory card.
15. Phone is ready to install applications, without "Expired Certificate" error message.
Option 2
Alternatively use this to apply for .CER and .KEY for signing applications / games.
Download SignSIS & FreeSigner (Freeware)
- http://www.2shared.com/file/10095405/d0fd4cfb/Sign_SIS_GUI.html
Signing Video Tutorial
- http://www.youtube.com/watch?v=z0mZ6d1klaU
Also, please feedback the results as the results could be useful to other members / visitors.
Thanks & best regards,
XM
I'm an Xploit - Please feel free to post your issues, feedbacks in this discussion forum and I'll do my level best to help, otherwise my knowledged friends whom are around willing to help you. Thank you !

Plz help with my laptop

hi i just got a powerbook g3 from my ffreind, i think its a lombard because it doesnt have those ports in the back. It has like almmost 5 gbs of space and i got 2gbs left, lol. ok back to the point: im trying to download stuff like limewire and java, but when i download the instalation thing on my laptop and i open it , a screen pops up and says that quicktime cant read this file. and now im trying to figure out what program should i start the insalatikon with? plz help me and be specific where it is located.
Thanx
and anyone that plays runescape say something about it. Runescaoppe rocks~~~~~~~lol

Welcome to the world of Macintosh! Sooo much better then Windows. And of course welcome to the forums! Anyway it sounds like, since your running OS 9, you either have the file formats set wrong or Quicktime cannot play that sort of media file possibly because it doesnt have the right codecs. I suggest updating to Mac OS 9.2.2 which is free for all OS 9 users as it includes newer versions of Quicktime if you dont already have the newest version. Look under Support>Mac OS> Jaguar and Older and you'll see, on the side, Mac OS 9 support. From there you'll see Updates for OS 9 I believe. Something like that I dont remember for sure and cant check now cause im using my crappy Windows PC and it wont let me get on the support page (typical XP)

Need support person for help with loading the adobe reader

We purchased Adobe reader but it will not load onto my computer and per my boss I need to get help from you.
my phone number is 813-445-7295 ext 104

Nobody will ring you, sorry. But perhaps we can help (this is not Adobe staff).
Let's start with what you purchased. Check your receipt. Adobe Reader is free, nobody should have charged you for that..
Then, let us know what you mean by "will not load". If you get any messages, please let us know the exact words.

Plz. help with strange date insertions in access???

HELLO all,
i noted a strange thing, when i insert into access table the date it swaps the month and day part for some reason in some records .
why is this happening,
plz. help.
code is as follows
Calendar cal = Calendar.getInstance();
                                        cal.add(Calendar.DAY_OF_MONTH,-1);
                                        System.out.println(""+cal.getTime());
          //this swaps                         SimpleDateFormat dateFormat = new SimpleDateFormat("MM/dd/yyyy")
//this swaps too
     //SimpleDateFormat dateFormat = new SimpleDateFormat("dd/MM/yyyy");
                                        String currentdate = dateFormat.format(cal.getTime()); // formats your date
custom date is dd/mm/yyyy in table

Hi vykalra1,
As far as I know, the way dates (and times) are stored in a Micro$oft Access database has nothing to do with the display format. The format is only used for displaying the date that is stored in the Access table.
A "field" with "Date/Time" datatype in an Access table maps to the "java.sql.Timestamp" class. Therefore, in order to insert a value into a "Date/Time" (Access) "field", you need to create a "java.sql.Timestamp" object. According to the javadoc, the "java.sql.Timestamp" constructor takes a parameter of type "long" (i.e. java primitive type) -- which represents the number of milliseconds since midnight, 1st January, 1970.
Therefore, you don't really need to use "Calendar" or "SimpleDateFormat".
As I understand it, you are trying to insert yesterday's date into your table. Below is an example using a sample table that has two fields -- 'name' and 'updated' -- which (hopefully) will help you. Note how I determine yesterday's date -- using millisecond calculations only.
The below code was compiled and tested on Windows XP with J2SE SDK 1.4.1_02 and Micro$oft Access 2002.
import java.sql.*;
public class JdbcOdbc {
public static void main(String[] args) {
    Connection dbConn = null;
    PreparedStatement stmt = null;
    String sql = "INSERT INTO Table1 (name, updated) VALUES (?, ?)";
    try {
      Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
      dbConn = DriverManager.getConnection("jdbc:odbc:db1");
      stmt = dbConn.prepareStatement(sql);
      stmt.setString(1,"vykalra1");
      long now = System.currentTimeMillis();
      long millisecondsInOneDay = 1000 * 60 * 60 * 24;
      long yesterday = now - millisecondsInOneDay;
      stmt.setTimestamp(2, new Timestamp(yesterday));
      stmt.executeUpdate();
    catch (SQLException sqlEx) {
      System.err.println("Database operation failed.");
      sqlEx.printStackTrace();
    catch (ClassNotFoundException cnfEx) {
      System.err.println("JDBC driver class not found");
      cnfEx.printStackTrace();
    finally {
      if (stmt != null) {
        try {
          stmt.close();
        catch (SQLException sqlEx) {
          System.err.println("ERROR: Failed to close statement");
          sqlEx.printStackTrace();
      if (dbConn != null) {
        try {
          dbConn.close();
        catch (SQLException sqlEx) {
          System.err.println("ERROR: Failed to close DB connection");
          sqlEx.printStackTrace();
}Good Luck,
Avi.

Help with display settings needed urgently

Graphics and icons that are supposed to be round appear oval. For instance the Safari and App icons on the dock appear very oval. Logos on websites I've visited before and I know are round appear oval.
I've tried all display settings and nothing helps. I'm a designer and this is causing a major hinderance. Everything appears condenced / squashed sideways. I'd be very grateful if someone could help with this.
I've just purchased the laptop. I have been using Mac for a few years and I've always selected the "stretched" option from the Display settings which sorted out the problem completely. A circle looked a proper circle. But in this version the option is not available.
Badly hoping someone can help with this.
Thanks.
Version Details - OS X Lion 10.7.4

It sounds like you have selected an incorrect resolution. For starters, are you talking about your Air's display or an external display? You haven't said which Air you have. If you have an 11" model, make sure your display resolution is set to 1366x768. If you have a 13" model, it should be set to 1440x900. These are the proper resolutions for the built in displays. Chosing anything other than the referenced "native" display resolutions will result in distortions or clarity problems.

Plz help with scripting in adobe....urgent

Similar Messages

Maybe you are looking for