Plz hlep my
There is a problem in my iPhone device after updating the new version needed to Active and wants amyl, bus and my Lord and unfortunately forgot this data, what work
Please don't double post. Continue to post in your original thread:
https://discussions.apple.com/message/23588862#23588862
Similar Messages
-
There is a problem in my iPhone device after updating the new version needed to ActiveX wants amyl, bus and my Lord and unfortunately forgot this data, what work Please reply my machine data is
Imei: 013055008069758
SerialNumber:DN*******TC0
mlbserialNumber: DQ************42D
plz hlep me
<Personal Information Edited by Host>There is a problem in my iPhone device after updating the new version needed to Active iPhone 4s
and
I upgraded to 7.0.3 yesterday and now my battery only lasts about 4 hours with very little active use.
iOS 7.0.3 -
After I chaged my accout info,it shows bugs? Plz hlep me!
After I chaged my accout info, it shows I must verify my payment information. But when I select "none" and done, it shows contact itune supports to complete this transaction. How can I fix this bugs? Plz hlep me!
Do this on your iTunes program on the computer instead. Your Credit Card used on the profile is probably maxed.
-
Plz hlep, Misuse of ellipsis ...
Anyone can hlep...?
> so just 'cause I'm quiet don't think I'm weak.
weak references aren't held as soft refs and not strong referencs etiehr, its also known as small anchor refs that are held in the eden heap, which is not the stadk but the heap, like what the methods are not using but would use if the used portion referrenced the last part that isn't ref'd using pass "by value", note the quotes like Aunty Mary said. you should know this you cab driver fisheh face dumbss! My goodness! -
Fancast will not work afther flash play10,1,85,3 update plz HLEP!!!
movie or tv show well not start :o
the exact same problem here, but on windows xp sp3.
the other system/software setups are exactly the same as those of crashd0g. firefox 3.6.11, flash 10.1.85.3. doing a complete, clean reinstall of ff, or starting ff in safe mode with only sf enabled and other add-ons disabled has not solved the problem for me either. regardless of which website i visit, flash does not load. to add, the problem did not start to occur on 3.6.11, but on 3.6.10.
visiting the adobe sf testing site doesn't even tell me which version of sf ff has, nor does it tell me to install the latest version of sf. the said site shows only black or gray spaces at where it is supposed to show "congrats, you have successfully installed sf", or "you have the latest version of sf". -
Plz.hlep ihave iphone5s icloud lock?
Iphone 5s
Ios 7.1.1
Problem is icloud lockedHey magdi yousuf,
Thank you for using Apple Support Communities.
The following article provides the steps to take when you have been locked out of iCloud (Apple ID).
If your Apple ID has been locked - Apple Support
Cheers,
Jeff D. -
Oracle application installation on AIX IBM P6
Hi,
I need help regarding pre-req how i install VAC 7 C and C++ verison 7 on AIX IBM P6. (vac.70.aix52-61.jun2009.ptf.tar.Z)
When I install VAC 7 using "smitty install_all"
there are some files set missing and installation failed.
Please help me.
Regards,
Syed ShabuddinHi Hussin,
Thank your response. see error and our AIX administrator not understading the way or work around. plz hlep filesset of TL level we have AIX 5.3 TL 7.
[Entry Fields]
* INPUT device / directory for software /home/sysadmin/vac-in>
* SOFTWARE to install [_all_latest] +
PREVIEW only? (install operation will NOT occur) no +
COMMIT software updates? yes +
SAVE replaced files? no +
AUTOMATICALLY install requisite software? yes +
EXTEND file systems if space needed? yes +
OVERWRITE same or newer versions? no +
VERIFY install and check file sizes? no +
Include corresponding LANGUAGE filesets? yes +
DETAILED output? no +
Process multiple volumes? yes +
ACCEPT new license agreements? no +
Preview new LICENSE agreements? no +
F1=Help ┌──────────────────────────────────────────────────────┐
F5=Reset │ Running command... │
F9=Shell └──────────────────────────────────────────────────────┘
COMMAND STATUS
Command: running stdout: yes stderr: no
Before command completion, additional instructions may appear below.
[MORE...119]
vac.man.ZH_CN 8.0.0.22 Requisite failure
vac.man.Ja_JP 8.0.0.22 Requisite failure
vac.man.JA_JP 8.0.0.22 Requisite failure
vac.man.EN_US 8.0.0.22 Requisite failure
vac.lib 8.0.0.22 Requisite failure
vac.include 8.0.0.22 Requisite failure
vac.html.zh_CN.C 8.0.0.22 Requisite failure
vac.html.ja_JP.C 8.0.0.22 Requisite failure
vac.html.en_US.C 8.0.0.22 Requisite failure
vac.html.common.search 8.0.0.22 Requisite failure
vac.aix50.lib 8.0.0.22 Requisite failure
vac.C 8.0.0.22 Requisite failure
vac.Bnd 8.0.0.16 Requisite failure
[BOTTOM]
COMMAND STATUS
Command: failed stdout: yes stderr: no
Before command completion, additional instructions may appear below.
[TOP]
geninstall -I "a -cgNQqwX -J" -Z -d /home/sysadmin/vac-installer/vac8 -f File
2>&1
File:
S:vac.Bnd 8.0.0.16
S:vac.C 8.0.0.22
S:vac.aix50.lib 8.0.0.22
S:vac.html.common.search 8.0.0.22
S:vac.html.en_US.C 8.0.0.22
S:vac.html.ja_JP.C 8.0.0.22
S:vac.html.zh_CN.C 8.0.0.22
S:vac.include 8.0.0.22
vac.lib 8.0.0.22 # IBM XL C Compiler Libraries
vac.man.EN_US 8.0.0.22 # IBM XL C Compiler Man Pages-...
vac.man.JA_JP 8.0.0.22 # IBM XL C Compiler Man Pages-...
vac.man.Ja_JP 8.0.0.22 # IBM XL C Compiler Man Pages-...
vac.man.ZH_CN 8.0.0.22 # IBM XL C Compiler Man Pages-...
vac.man.Zh_CN 8.0.0.22 # IBM XL C Compiler Man Pages-...
vac.man.en_US 8.0.0.22 # IBM XL C Compiler Man Pages-...
vac.man.ja_JP 8.0.0.22 # IBM XL C Compiler Man Pages-...
vac.man.zh_CN 8.0.0.22 # IBM XL C Compiler Man Pages-...
vac.ndi 8.0.0.22 # IBM XL C Non-Default Install...
vac.pdf.en_US.C 8.0.0.22 # IBM XL C Documentation (PDF)...
vac.pdf.ja_JP.C 8.0.0.22 # IBM XL C Documentation (PDF).
MISSING REQUISITES: The following filesets are required by one or more
of the selected filesets listed above. They are not currently installed
and could not be found on the installation media.
vac.Bnd 8.0.0.0 # Base Level Fileset
vac.C 8.0.0.0 # Base Level Fileset
vac.aix50.lib 8.0.0.0 # Base Level Fileset
vac.html.common.search 8.0.0.0 # Base Level Fileset
vac.html.en_US.C 8.0.0.0 # Base Level Fileset
vac.html.ja_JP.C 8.0.0.0 # Base Level Fileset
vac.html.zh_CN.C 8.0.0.0 # Base Level Fileset
vac.include 8.0.0.0 # Base Level Fileset
[MORE...55]
vac.lib 8.0.0.0 # Base Level Fileset
vac.man.EN_US 8.0.0.0 # Base Level Fileset
vac.man.JA_JP 8.0.0.0 # Base Level Fileset
vac.man.Ja_JP 8.0.0.0 # Base Level Fileset
vac.man.ZH_CN 8.0.0.0 # Base Level Fileset
vac.man.Zh_CN 8.0.0.0 # Base Level Fileset
vac.man.en_US 8.0.0.0 # Base Level Fileset
vac.man.ja_JP 8.0.0.0 # Base Level Fileset
vac.man.zh_CN 8.0.0.0 # Base Level Fileset
vac.ndi 8.0.0.0 # Base Level Fileset
vac.pdf.en_US.C 8.0.0.0 # Base Level Fileset
vac.pdf.ja_JP.C 8.0.0.0 # Base Level Fileset
[MORE...43]
vac.pdf.ja_JP.C 8.0.0.0 # Base Level Fileset
vac.pdf.zh_CN.C 8.0.0.0 # Base Level Fileset
<< End of Failure Section >>
BUILDDATE Verification ...
Verifying build dates...done
FILESET STATISTICS
21 Selected to be installed, of which:
vac.man.Ja_JP 8.0.0.22 Requisite failure
vac.man.JA_JP 8.0.0.22 Requisite failure
vac.man.EN_US 8.0.0.22 Requisite failure
vac.lib 8.0.0.22 Requisite failure
vac.include 8.0.0.22 Requisite failure
vac.html.zh_CN.C 8.0.0.22 Requisite failure
vac.html.ja_JP.C 8.0.0.22 Requisite failure
vac.html.en_US.C 8.0.0.22 Requisite failure
vac.html.common.search 8.0.0.22 Requisite failure
vac.aix50.lib 8.0.0.22 Requisite failure
vac.C 8.0.0.22 Requisite failure
vac.Bnd 8.0.0.16 Requisite failure -
hi all
i hav a following prob
i m printing data of one internal table in my smartform
and this internal table contains only one record
now i want to know, if there are 10 different record in my smartform
how can i print these 10 records on diferent 10 pages...
plz hlep
any help wil b rewarded.
thanxhi,
make changes in your driver programme.
data : wa type i_tab.
loop at i_tab.
AT FIRST.
CONTROL_PARAMETERS-NO_CLOSE = 'X'.
ENDAT.
AT LAST.
CONTROL_PARAMETERS-NO_CLOSE = SPACE.
ENDAT.
assign record in wa
call smartforms using this fuction CALL FUNCTION FUNC_MODULE_NAME
and pass wa to print data in main window
CONTROL_PARAMETERS-NO_OPEN = 'X'.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endloop.
try this. if you have 10 records your smartform will print 10 page.
raj -
XML Anonymizer Module configuration
I want to implement XML Anonymizer Module in my scenario. I am referring note 880173 for this
Basically I want to change the file encoding from utf-8 to US-ASCII by using XML Anonymizer Module.
When I configure the module as shown below.........I am getting the following error in communicaiton
channel monitoring.
Error: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Path to object does not exist at AF_MODULES, the whole lookup name is localejbs/AF_MODULES/XMLAnonymizerBean.
Processing Sequence
1-AF_MODULES/XMLAnonymizerBean-LocalEnterpriseBean---1
2-CallSapAdapter-LocalEnterpriseBean---2
Module Configuration
1-anonmizer.encoding-US-ASCII
Somebody could you plz hlep me how to configure the module ??
Thanks
kumarhi,
For using this module you can refer to these two links instead of notes its really helpful:
/people/stefan.grube/blog/2007/02/02/remove-namespace-prefix-or-change-xml-encoding-with-the-xmlanonymizerbean
http://help.sap.com/saphelp_nw04/helpdata/en/2e/bf37423cf7ab04e10000000a1550b0/frameset.htm
localejbs/AF_MODULES/XMLAnonymizerBean.
no need to write local ejbs here ,directly write AF_MODULES/XMLAnonymizerBean as module name.
For : 1AF_MODULES/XMLAnonymizerBean-LocalEnterpriseBean-1,2-CallSapAdapter-LocalEnterpriseBean-2
Give module key 0 to -CallSapAdapter---LocalEnterpriseBean and
1 to AF_MODULES/XMLAnonymizerBean---LocalEnterpriseBean
hope it helps.reward for useful ans.
regards,
ujjwal kumar -
The WebApplicationException log ID is [00219B410BF5006A00000000000008D4]
Dear all:
I open IE but it response err msg.
plz hlep me.
500 Internal Server Error
Error: "Application error occurred during the request processing."
Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jsts/home
Details:"The WebApplicationException log ID is [00219B410BF5006A00000000000008D4]."
thx.....Dear all:
I open IE but it response err msg.
plz hlep me.
500 Internal Server Error
Error: "Application error occurred during the request processing."
Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jsts/home
Details:"The WebApplicationException log ID is [00219B410BF5006A00000000000008D4]."
thx..... -
hi everyone,
i need to fetch gl account wise vendor list,i cant use bseg table since its getting time out to fetch nearly 2 laks records,is there any similar table like bsis,bsas etc.....
very urgent plz hlep.....
thanks in advance
regards,
balaji.sPlease see:
[Quickly Retrieving FI document Data from BSEG|/people/rob.burbank/blog/2007/11/12/quickly-retrieving-fi-document-data-from-bseg]
Rob -
There is a problem in my iPhone device after updating the new version needed to ActiveX wants amyl, bus and my Lord and unfortunately forgot this data, what work Please reply my machine data is
Imei: 013055008069758
SerialNumber:DN*******TC0
mlbserialNumber: DQ************42D
plz plz plz hlep me
<Edited by Host>There is a problem in my iPhone device after updating the new version needed to Active iPhone 4s
and
I upgraded to 7.0.3 yesterday and now my battery only lasts about 4 hours with very little active use.
iOS 7.0.3 -
Blackberry Curve 8520 - White Screen help!?
Hi,
I have started having problems with my Curve over the last couple of days. I'm sure you have heard of the problem before, battery gets to about 20/30% life & then a white screen appears. The only way to stop this is to plug the phone into the mains charger.
I have read other topics suggesting I backup all data then re-install the OS.. The problem is, my Blackberry Desktop Manager won't recognise my Blackberry. Windows makes the noise to suggest the phone has been found & the blackberry battery indicates its charging.
All help & suggestions would be excellent, thanks in advance.plz needed hlep me blackberry 8520 white screen problam change lcd and ic problam is not solf plz hlep met his problam on raziqbbr
-
HLEP PLZ full screen makes collerd blocks and is scrmbled
k i really need help i love video sites butt as of a week
agio wich i systume restored to and sitll nouting i cant few full
screen of anething that uses a flash player ive try so meny
diffrint things and no luck can aneyone plz help me when i go full
screen its a jumbled mess of colerd blox and weerd lins an im
loseing my mind plz plz plz help there r a bnch of privet site
invites to aneyone that can fx this plz help im desprit i dont want
to reformat cosue of somting so sillyI got again a total system freeze today when I wanted to launch firefox using only the openbox menu, without wbar running.
So I decided to try now the 'nouveau.noaccel=1' kernel command line parameter, and to use again wbar for my frequently used applis.
In the Xorg log, the differences are:
without 'nouveau.noaccel=1'
[ 30.761] (II) UnloadModule: "nv"
[ 30.761] (II) Unloading nv
[ 30.761] (--) Depth 24 pixmap format is 32 bpp
[ 30.762] (II) NOUVEAU(0): Opened GPU channel 0
[ 30.765] (II) NOUVEAU(0): [DRI2] Setup complete
[ 30.765] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 30.765] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 30.776] (II) EXA(0): Driver allocated offscreen pixmaps
[ 30.777] (II) EXA(0): Driver registered support for the following operations:
[ 30.777] (II) Solid
[ 30.777] (II) Copy
[ 30.777] (II) Composite (RENDER acceleration)
[ 30.777] (II) UploadToScreen
[ 30.777] (II) DownloadFromScreen
[ 30.777] (==) NOUVEAU(0): Backing store disabled
[ 30.777] (==) NOUVEAU(0): Silken mouse enabled
with 'nouveau.noaccel=1'
[ 1191.621] (II) UnloadModule: "nv"
[ 1191.621] (II) Unloading nv
[ 1191.621] (--) Depth 24 pixmap format is 32 bpp
[ 1191.621] (EE) NOUVEAU(0): Error creating GPU channel: -19
[ 1191.621] (EE) NOUVEAU(0): Error initialising acceleration. Falling back to NoAccel
[ 1191.621] (==) NOUVEAU(0): Backing store disabled
[ 1191.621] (==) NOUVEAU(0): Silken mouse enabled
[ 1191.621] (==) NOUVEAU(0): DPMS enabled
So now 3D acceleration is disabled.
I will see now if the system is stable enough for my daily usage and gives satisfactory performances.
I am almost sure that the mesa nouveau dri driver is the cause of the freezes.
Last edited by berbae (2013-03-27 10:07:42) -
I found My iPhone contacts on my friends Iphone we both have 4s! But we use the same apple ID and ICloud ID! How can undo what happened? all my private stuff is now on his phone!!! help me plz!!?
Of course if you are both connected to the same iCloud account you have the same contacts - what did you expect?. The contacts live on the server and are read from there by the devices; so as you've both managed to sync your contacts up to iCloud they are now inextricably mixed. You can only delete your contacts by deleting individual ones, and doing that will delete them from your phone as well.
You can only unravel this by
1. In the iCloud contacts page at http://icloud.com, select all the contacts, click on the cogwheel icon at bottom left and choose 'Export vCard'.
2. Sign out of System Preferences>iCloud
3. Create a new Apple ID and open a new iCloud account with it for your own use.
4. Import the vCard back into the iCloud contacts page.
5. Go to http://icloud.com and sign in with the original ID. This is now his ID. Work through the contacts individually deleting the ones you don't want him to have. When done sign out and advise him to change his password.
6. Go to the new iCloud account and delete his contacts individually.
Of course if you have also been syncing calendars and using the same email address there are problems with doing this.
Maybe you are looking for
-
Syncing To Dos on iCal with my iPod
I checked on my iPod and I found To Dos under calendar--unfortunately it looks like it synced every To Do I've ever had on iCal, even though most of them are completed. Is there any way to remove To Dos after they have been checked as complete?
-
I mapped my credit card details for payment but now I want to delete it, how can I do this in LUMIA 610 ?
-
C3 01(Touch & Type) Internet Phone
I m trying to use the Internet Phone inbuilt by nokia on my handset using WiFi but it doesn't work. I have tryed many time to connect but it never get Connect and gave's erroe NO SERVER Found i hve tryed using the different option(providers) on Inter
-
Which document outlines the new .jsp's for v7?
In looking at the new object folder files, I noticed that some of them are gone and replaced with new ones, like "leafWrapper" is replaced with channel (I think). I've downloaded all of the available documents, ut cannot find one that outlines the sc
-
Cannot conect to Job server after redirecting log files
Platform: Windows Software: Data Services 3.0 (Data Integrator 12.0.0) Issue: When redirecting the Log files to go to another drive on the windows Server, we are unable to reconnect to the Job Server with Designer. We did the following to re-direct t