Plz I want firmware RV042 Beta

I Beta Firmware RV042 I wanted to test it include pdf from the solution.
Send to email I would be very [email protected]
Thanks Cisco

nebelfuerst,
To make a feature request to allow additional dynamic DNS services, please open a case:
http://cisco.com/go/sbsc
Also, I know that dyndns.com is no longer offering the free service (I have used it for several years), but my understanding is that $25/year gets you 30 hostnames. So for $50/year you could cover 60 different sites which is much more reasonable than a static IP address at each site. For a single site like I have, I am now using no-ip.com and updating via an IP camera on the LAN.
If enough people open a case and make a feature request for no-ip.com (or other free dynamic DNS) to be added, Cisco will likely add the option in a future firmware.
- Marty

Similar Messages

  • I have a ipod mini, i upgraded my battery, and drive to 32 GB, my itunes will not see it, and the mini only shows file pic error. I have a 10.4.11 powerbook 667 so i can't upgrade to a newer itunes, which is 4.7.1, all i want is a better battery-more song

    Hi,
    I have a older ipod mini which needed a battery, so i also upgraded the drive to a 32 GB flash drive. When i did the upgrade, it saw the itunes fine, but it never loaded anything. When i unplug it it shows the folder with "!" icon, and i can't get my itunes to see it. I have a powerbook 667 mhz g4 with itunes 10.4.11, so i can't upgrade to leopard. All i wanted was a better battery and a bit more song volume. This older 4 GB will fit back in and works fine, but i'm upset i spent $37 to only fail. What am i doing wrong? itunes is 4.7.1 How can i over come this?

    In Disk Utility, select the iPod (the device) in the sidebar.  So, if you see the iPod in the sidbar with a "volume" indented below the iPod, select the "device" (not the volume).
    Go to the Erase tab to the right.  The choice for Format is Mac OS Extended (Journaled).  Name does not matter, because iTunes will rename it during the Restore.  Click Erase.
    it "flashed" out of itunes.
    That may be an issue with the USB connection.  As a test, shut down (power off) the Mac.  Disconnect other USB devices including USB hub, except for standard USB keyboard and mouse (if normally used).  SInce this is a laptop, connect it to its power adapter, so that it's not running on battery power.
    Connect the iPod to a direct USB port on the Mac.  Note if there is any difference regarding the iPod not maintaining a connection.

  • HT1267 my appleid has a purchase error i need help i cant use my apple id plz i want to be able to downlaod more apps plz

    my apple has billin and purchaseproblem which i did not buy plz i want to be able to use my apple id again plz

    Maybe try this, on iPhone tap Settings App>select Store, near bottom>select Apple ID: at bottom>select Sign Out. Then sign in again. Worth a quick try.

  • HT1918 plz i want help , how can i use credit card visa , im try to fill blank no. card information when i finish appear me msg ( the payment card you entered is not valid in israel p;ease provide avalid payment card for israel , im from palestine ) plz s

    plz i want help , how can i use credit card visa , im try to fill blank no. card information when i finish appear me msg ( the payment card you entered is not valid in israel p;ease provide avalid payment card for israel , im from palestine ) plz solutio?

    Oh thank god i am not the only one with this problem. It started with me on Saturday (aug 28) and still, no solution.
    I live in the border with the USA so i’ve been using my itunes account with a USA debit card and then it started with that **** declined CC problem =S
    The funny thing is that i’ve been trying to change countries, setting my account to Mexico and it would still say that the CC are declined. Tried 2 USA cards and 2 Mexican cards, no results =S
    Wanna read something funny. I even tried to create a brand new account based in Mexico, with another email address and it still wouldn’t let me, tells me my cards are not valid……..the **** apple!!! i cannot update any app and i just got my iphone 4 on friday last week and i am dying to try new apps.
    So far I’ve sent 2 emails and still no **** solution. At least i am not alone =’(

  • Hi good people of d iPhone4 community, plz i wanted 2 update the iOS of mine

    Hi good people of d iPhone4 community, plz i wanted 2 update the iOS (4.3.3)  of mine but iTunes couldn't dwonload the update. I did so with a download manager and got iOS 5.1.1 but updating it through iTunes or directly is ****. Any help on that please?
    Thanks in advance.
    Simon

    i already downloaded the new iOS version using free download manager and i have it in my labtop. How do i get it into the download folder of iTunes or upgrade  my iPhone? If i downloaded using iTunes or my iPhone, i wouldn't have been having any problems upgrading/ Waiting for your assistance.\
    thnks

  • New firmware RV042 ?

    new firmware upgrade for RV042 determined when
    You can download the beta version from now on?

    I am not sure that I completely understood your question. But currently the latest firmware available for the RV042 Series is FW 4.2.2.08
    If there is a particular beta firmware available the only way to get access to it is to call the Support Center and open a case. Once the engineer has troubleshot and determined that you are experiencing an issue that we currently have a beta firmware for, they will begin escalation process to get you to the team that controls that firmware.
    Thanks
    Eric Moyers    .:|:.:|:.
    Cisco Small Business US STAC Advanced Support Engineer
    Wireless Subject Matter Expert
    CCNA, CCNA-Wireless

  • Last firmware RV042

    Dera SIR,
    where i can download the last version orf RV042 with protec trend net

    Here is the links for the rv042 firmware downloads. Hope this helps.
    http://tools.cisco.com/search/JSP/search-results.get?isNavigation=true&strQueryText=rv042&strSelectedModifierValue=cdctask%3A%3A^%22Download+Software%22%24%3A%3ATask%3A%3ADownload+Software%3A%3A%3A%3A&strSortBy=&strqueryid=1&websessionid=Pqqkcbkr_HZLAFj1qBRyHr7&strCurrentSimilarSearchBreadCrumb=&strCurrentSelectedModifierValues=&country=US&language=en&profile=enushomesppublished&c_navsequence=3%3A2

  • HT4367 How to update Apple TV firmware 6 beta when beta expired?

    I installed Apple TV firmware 6.1.4. Now I see a message that that firmare has expired, and instructions to update connecting the Apple TV to a computer with iTunes. I did that, but iTunes downloads firmware version 5.3 which isn't capable to install. In the developers site I can't find a way to download the current version of the Apple TV firmware. Is there a way to pass the message that the firmware has expired and update to the current version?

    Please post on the developers forum and not in these public forums.

  • Plz I want Urgent  reply

    Does java support static classes or not

    There are several things wrong with your question.
    * The subject line contains no information about what you're asking.
    * The subject line is exactly the same as for another unrelated question you asked.
    * Your urgency means nothing to us. We don't care about it. We don't want to hear about it. It's your problem, not ours, and it's annoying when you tell us about it.
    * You don't appear to have done any research on your own.

  • E-print constantly wants firmware update

    Printer: HP Laserjet Pro M1536dnf MFP
    No matter what I do, ePrintCenter still shows the red circle with the exclamation mark saying "To ensure your ePrint service is not interrupted please update your firmware at www.hp.com/go/eprint"
    I have clicked on the link at least 5-6 times -- downloaded the updater program, run it and it connects to the Internet to download whatever and all seems to work.  At the end it sends me to the embedded Web Services page from the printer, which shows that Web Services is indeed [still] enabled. (It would be helpful if the updater actually told you what you were supposed to be looking for on the Web Services page...)
    The firmware date shown under "Device Configuration" is:  20110405
    Any ideas how to
    (a) really update the firmware if the firmware for this printer is newer than 20110405
    (b) convince ePrintCenter that it is really up to date and to stop telling me I need this?
    LC

    Hello LewCipher,
    The laserjet printers will have the firmware notice at eprintcenter.com as a general notice.  It doesn't necessarily mean your printer needs an update.
    You can always visit www.hp.com/support to download any firmware updates and install them directly rather than following the updater.
    I suspect the printer is already updated since it does have web services.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Plz plz i want to deliver a message to the sony mobile managers

    hi guys i hope that u r ok
    i am a sony loyal fan since the days of k750 .....
    and i have a message to deliver to the sony mangers out there in tokyo ....
    plz help me to get this done

    I don't understand
    http://www.sonymobile.com/global-en/support/contact-us/
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Plz I want oraks.jks urgent

    Dear All,
    I triyed to find the oraks.jks in thr application server or in the Jdeveloper, So plz if any body has it , can he send it to me to this email :[email protected]
    thanks.

    And the budget should be infinite!Meanwhile, my project is prioritized #205 on a list of 385. I don't know what criteria was used to prioritize my project. I also don't know, and apparently no one can tell me, what it means to be 205 on a list of 385. New projects could get prioritized ahead of mine.... or not. I have no idea whether #205 means, give it up - it won't ever happen or it means, wait awhile and your project will get resources.

  • PLZ helpppppppppppppppppppppppp want to roll back "active" of the recovery partition...

    Hi,
    I need serious help,,,,,,any help is appreciated :
    --- I believed my second hard drive is burnt , but it was not ( not able to access it, it was because i had changed the workgroup in NTFS),
    --- at this stage my windows 7 would boot normally , but like a new user, no access to previous files
    --- so tried to do restore,    F11  showed there were no previous saving for restore
    --- tried to do recovery , F11  showed that "restore" botton is gray/ inactive
    --- someone on internet suggested to make the recovery partition , "active", so i did it through disk management
    --- then when windows boot up, it went directly to previous recovery page with inactive botton,, i can not access my previous windows , i can not boot up to windows again
    --- so now it boots up and goes to useless recovery page
    ---  through bios activated "HP Quick web" , and playing with photo viewer in quickweb i noticed all my files on the "maybe burnt drive"  are all there!!!!    and i can view them,,,,,,,   ooops!!! my whole problem was changing windows group!!
    ---   so if i can just boot to previous windows , then i can change the group and access the files...but
    --- now i cant go out of recovery page,,,,, now that it is "active partition" everytime i turn on computer is JUST goes to recovery page screen (which is inactive),,,,,,,,,,,,,,,,,,,,,,,,,,
    --- how can i roll back, or inactive the recovery partition and use my drive "C" previous partition as the only active one
    I dont have recovery CD (I will get it tomorrow, i ordered it by HP, 30 bucks!  phewww),,,,,,,,,
     i am panicked any help would be deeply appreciated.........................................................
    HP Pavillion DV-7 4069 
    Windows 7  Home Premium

    Hi,
    If you don't already have one, use another PC to create a Windows 7 Recovery CD.  Download the relevant ISO from the links below.
    Windows 7 32bit
    Windows 7 64bit
    You should use an application such as ImgBurn to burn the ISO to a CD.  Once created, or if you already have this, insert the CD and restart to boot from it.  Select the Repair option.
    Select the 'Repair your Computer' option and follow Option 2 in the guide on the link below to run Start-up Repair – you may need to run this 2 or 3 times.
    http://www.sevenforums.com/tutorials/668-system-recovery-options.html
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I want to download Beta 6.0 but it says RealPlayer Browser Record Plugin 14.0.3 and avast! WebRep 6.0.1203 will be disabled. Is there a way to download the update without losing these add ons?

    If not, is there any way to stop the software update notice until these add ons are accepted?

    Hi blabla12345,
    (untested and without warranty)
    replace this line:
    const sSaveCUBE = "CUBE";
    with this:
    const sSaveCUBE = "cube";
    Have fun

  • Old MP3 player firmware was better than new. W

    One questionWhy new Zen V Plus after restart dosn't remember previous time. Listening ?50 min audiobook mp3?file. Pause? on 0:30:00, Turn off player. After restart player again file from 0:00:00.So I need remember what minute?I stop... and after reverse. Not smart. I my old Creative Muvo2, after restart always remember?previous time.

    question was.Why in old type MP3 player have?"good timer memory" for not finished track? after restart player. New type Zen ... after restart player reset timer to "zero"

Maybe you are looking for