PLZ...PLZ..HELP..wher i found pre loded n82 welco...
i just format my n82...then i realise that i just lost my wellcome persentation video...( TOOLS--UTILITIES====WELCOME......)
4M WHERE I CAN DOWNLOAD THAT PRE LODED N82 WELCOME PERSENTATION VIDEO??????????????????..PLZ..PLZ...HELP...ME
/t5/Software-Updates/PLZ-HELP-PRE-LODED-N82-WELCOME-PERSENTATION-VIDEO/m-p/708742#M77060
If you want to thank someone, just click on the blue star at the bottom of their post
Similar Messages
-
PLZ...HELP..PRE LODED N82 WELCOME PERSENTATION VID...
i just format my n82...then i realise that i just lost my wellcome persentation video...( TOOLS--UTILITIES====WELCOME......)
4M WHERE I CAN DOWNLOAD THAT PRE LODED N82 WELCOME PERSENTATION VIDEO??????????????????..PLZ..PLZ...HELP...MEYou could watch it on youtube or google it and download it. Me too had the same problem two years back but then i downloaded it from mosh.nokia.com which doesn't exist now.
Please thank me by giving 'KUDOS' star. It will help me to serve you better.
Currently using N82 and 5230. Next would be N? -
i deleted my download folder by accident i waz moving it and it just deleted it and showed this smoke. i found it in my trash so put it on my dock then clicked on it and it shows preview?! plz help how do i get it back!!!
You need to restore the folder using the (Put back) selection (CTRL click).
-
I have problom to running maps.when i put any direction route a massage popup. Direction could not be found between these location. I am ussing ios 6. Any body plz help me
Read here, as such is not supported everywhere:
http://www.apple.com/ios/feature-availability/ -
I found an IPhone and tried to return it but we couldnt. I thought if make good use of it. It say Activate Phone Connect to ITunes. everytime I try it say Activation required. Plz help?!?
Mla1234 wrote:
I found an IPhone and tried to return it but we couldnt.
Try harder. It is useless to you.
Mla1234 wrote:
It say Activate Phone Connect to ITunes. everytime I try it say Activation required.
The Apple ID and Password that was Originally used to Activate the iDevice is required
If you do not have that information you will not be able to use the Device.
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818 -
Ios 6 have some bugs on ipod touch 4g like appstore search bug and accessibility which i cant go out from and crashes every where and imassages that the massge i send goes up and stick to the other messages plz help or do ios 6.1 can i change my a4 chip plz i swear when i pressed done to submite this safari crashed
Try to do a hard reboot (no data is lost) by holding down the home and power buttons at the same time untilyou see the Apple logo. Then, let go of both buttons. If that doesn't work, try restoring your iPod and do NOT restore from a backup. This will erase your data, but you can sync back everything except app data and settings from iTunes.
-
Hi I need ur help actually my iPhone 5 is not working properly I been to apple store they said u have to booked online for repair but I couldn't find where to register plz help out thx ali
Dollersheikh wrote:
... I been to apple store ...
Go to that Apple Retail Stores website and click on Make a Reservation...
Here's an example...
http://www.apple.com/retail/crossgates/
Store List here > http://www.apple.com/retail/storelist/ -
i found an iphone 4 it was totally disabled it was written on the screen already "IPHONE IS DISABLED" plz help me to enable it
The iPhone isn't yours to work with. Turn it in to the police in the area in which you found it.
-
i loose my iphone4 i dont know the serial number and emie number plz help me how to found my mobile and emie number
Read here:
http://support.apple.com/kb/HT4061
Your carrier also has a record of your IMEI number. -
Hello i'm forgotten my apple id's password how do you can my apple id's password My apple id is ********** And so i 'm forget yahoo and apple id's security question.... I'am Restored 7.0.3 to 7.1 Can you found my apple id's password plz help me :'(
<E-mail Edited by Host>how to reset password:
https://iforgot.apple.com/password/verify/appleid
FYI: not wise to publish your email in a public forum - the spiders
will shortly be filling your email inbox. -
Hi,
I have attached my simulation loop.In the model attached i hav eone main pump with constant rpm which drives the 5 smaller pumps and fills the tank at the same time.As soon as the tanks reach their 90% level,the valves of the five pumps close(SP1,SP2,SP3,Sp4,Sp5).After that the recirculating pumps opens for 5 secs of the first tank.As soon as the recirculation finishes,the drain valve(SV1) for tank 1 open and the volume goes to interim storage.This happens for all the remaining tanks.
My simulation works the first time,but when the second time the loop starts,it skips the recirculation pump even though i gave a time delay for 5 secs.Plz help ..I have attached the simulation.
Thanks,
Rami
Attachments:
Spatial Logic_2_Final.vi 223 KBRami,
I suspect that you have a race condition. The widespread use of local variables frequently leads to race conditions. Your subVI (Spatial Logic Sub_2.vi was not included) so I cannot run the VI. You have no way of knowing whether the subVI or the inner case structure will execute first, because there is no data dependency between them.
I think a shift register or a few and some dataflow thinking would allow you to eliminate the inner case structure, the local variables, and, probably, most of your problems.
Some of the SPi are indicators and some are controls. How are they used?
The last case of the inner loop retursn to Case 1. Would case 0 be better?
As for the second time through issue, it may be related to the Elapsed time function Auto Reset. From the help file: "Resets the start time to the value in Present (s) when the Express VI reaches the Time Target (s)." If more than 5 seconds elapses between the first time you use this and the next, it will exit immediately on the subsequent calls.
Lynn -
HELP ME!!! PLZ I HALF SERIOUSE IPOD PROBLEMS! PLZ HELP!
OK! I GOT MY IPOD VIDEO FROM MY FRIEND AND HE HASNT CHARGED IT IN A WHILE, AND HE DIDNT HAVE A CHARGER! SO I BOUGHT ONE AND I PLUGGED IT IN AND IT DOESNT EVEN DO ANYTHING ON THE COMPUTER! I DOWNLOADED ITUNES TWICE.....AND THE IPOD I GUESS HAS A LITTLE POWER BECAUSE IT SWITCHES FROM A DARK SCREEN WITH THE BATTERY ON IT WITH THE LIGHTNING BOLT(which i dont know what it means) AND GOES TO THE SCREEN WITH THE APPLE LOGO (also a dark screen)THEN IT GOES TO A WHITE SCREEN THAT HAS A SAD FACE IN THE IPOD AND A TRIANGLE AROUND AN EXCLAMATION POINT! I CANT FIND ANY OF THESE PROBLEMS ON THE APPLE WEBSITE. I WENT TO THE SITE AT THE BOTTOM OF THE WHITE SCREEN THAT SAYS "www.apple.com/support/ipod" IVE GONE LIKE 4 TIMES AND IT SAID TO CHARGE THE IPOD FOR ABOUT 30 MINUTES OR SO. I HAVE BEEN CHARGING IT FOR LIKE 2 AND A HALF HOURS AND NOTHING! I REALLY DONT KNOW WHAT TO DO BUT I AM TO THE POINT THAT I WANNA THROW IT AT THE WALL!!!!!!!!!!!! PLZ HELP ME PLZ!
Please have a read the following, very likely your iPod can be solved by connecting it with a Mac computer
Hello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921�
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote -
Plz help using ms access as database,i want to create a login page in java
hye frnz... plz help me m new to java
m using ms access as database and try to create a login page where user type username and pw
i had enter valid user entries in database i checked connectivity is working i want as user login the main window must open after checking username and pw field to database but
now there is an error class not found exception sun:jdbc...... error
plz help me i had stuck frm 4 days */
import java.sql.DriverManager;
import java.sql.Connection;
import java.sql.Statement;
import java.sql.ResultSet;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
class Login extends JFrame
//Component Declarations
JLabel jlb1,jlb2;
JTextField jtf1;
JPasswordField jpf1;
JButton jb1,jb2;
//Constructor
Login()
//frame settings
setTitle("Login Dialog");
setLayout(new GridBagLayout());
GridBagConstraints gbc = new GridBagConstraints();
setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
Dimension d= Toolkit.getDefaultToolkit().getScreenSize();
setBounds(d.width/2-175,d.height/2-100,350,200);
gbc.insets=new Insets(7,7,7,7);
//adding components
jlb1=new JLabel("User ID");
gbc.gridx=0;
gbc.gridy=0;
add(jlb1,gbc);
jlb2=new JLabel("Password");
gbc.gridx=0;
gbc.gridy=1;
add(jlb2,gbc);
jtf1=new JTextField(10);
gbc.gridx=1;
gbc.gridy=0;
add(jtf1,gbc);
jpf1=new JPasswordField(10);
gbc.gridx=1;
gbc.gridy=1;
add(jpf1,gbc);
jb1=new JButton("Login");
gbc.gridx=0;
gbc.gridy=2;
add(jb1,gbc);
jb1.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent ae)
Connection conn=null;
Statement stmt=null;
boolean found=false;
try
Class.forName("sun.jdbc.driver.JdbcOdbcDriver");
String dataSourceName = "Inventory";
String dbURL = "jdbc:odbc:" + dataSourceName;
conn=DriverManager.getConnection(dbURL, "","");
stmt=conn.createStatement();
ResultSet rst=stmt.executeQuery("Select * from User");
System.out.println(jtf1.getText()+"/t"+jpf1.getPassword());
while(rst.next())
System.out.println( rst.getString(1) +"/t"+ rst.getString(2));
if(jtf1.getText().equals(rst.getString(1).trim()) && new String(jpf1.getPassword()).equals(rst.getString(2).trim()))
found=true;
rst.close();
dispose();
MainWindow mw= new MainWindow(); /*created min window object created to be opend after login but not working*/
break;
rst.close();
stmt.close();
conn.close();
catch(ClassNotFoundException e){System.out.print(e);}
catch(Exception e){System.out.print(e);}
if(found==false) /*this portion is executing and dialog box appears invalid name and pw with class not found exception sun:jdbc.......on console */
JOptionPane.showMessageDialog(null,"Invalid username or password",
"Error Message",JOptionPane.ERROR_MESSAGE);
jb2=new JButton("Clear");
gbc.gridx=1;
gbc.gridy=2;
add(jb2,gbc);
jb2.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent ae)
jtf1.setText("");
jpf1.setText("");
jtf1.requestFocus();
setSize(350,200);
setVisible(true);
jtf1.requestFocus();
public static void main(String args[])
Login l=new Login();
Edited by: 795772 on Sep 19, 2010 4:44 AM795772 wrote:
hye frnz... plz help me m new to java
m using ms access as database and try to create a login page where user type username and pw
i had enter valid user entries in database i checked connectivity is working i want as user login the main window must open after checking username and pw field to database but
now there is an error class not found exception sun:jdbc...... error
plz help me i had stuck frm 4 days */
<snip>The subject of this forum is Oracle databases. How does your problem relate to that subject?
Two bits of advice:
1) Make sure you ask questions in a forum related to your problem.
2) If you want to be taken seriously as a professional, drop the MS IM Speak and use the language of the forum. In this forum it is English, which is successfully used by many people for whom English is far from their native language. -
Hi all,
i attended a interview, these are the qes..plz help me with ans..
1. is it possible without using function modules in
bdc(open, insert,close) data transferring? how ...
2. which one is better session/call transection? why?
3. in LSMW what r the methods u r using?
4. in LSMW otherthan recording any method is there? what are they?
5. in LSMW where are u doing field validation? in which step, can u explain?
6. is it possible to run smartform without using
" ssf_function_module_name", how ?
7. how will display secondary list in ALV.
8. how will u call back to secondary lists to base list?
9. how u r printing secondary list in interactive reports?
10. what are the events used in u r ALV reports?
11. how will u access data in secondary list?
12. what is diff b/w bapi created fm and standered bapi fm?
13. in ALE in which programm worked either standalone or any other?
here what is standalone?i know change pointer..Hi
10. what are the events used in u r ALV reports?
Events in alv and their FM The main events in alv and their FM and why we use these:
1. SLIS_PRINT_ALV.
2. SLIS_T_LISTHEADER.
3. SLIS_T_EVENT.
4. SLIS_T_SORTINFO_ALV.
5. SLIS_T_LAYOUT_ALV.
6. SLIS_T_FIELDCAT_ALV.
and in classic reports what is the sequence of events: === Events are
At selection-screen output.
Initialization.
At selection-screen on field
At selection-screen on end of field
At selection-screen on Radiobutton Group R1. (If you have any radio buttons)
At selection-screen on block b1. (If you have any blocks)
Start-of-selection.
Get node. (if the data is retreived from a logical database)
Get node late. (if the data is retreived from a logical database)
Top-of-page. (if the write statement is in the end-of-selection event or we can say that before the first write statement)
end-of-selection.
and fuction modules are
LISTHEADER - Is used to print the header information in the ALV List. Name, Date, Time, ALV Name and other details are called as Header information. EVENT - Basically this is the FM to handle Event's. When the user needs to do some event operation like when double clicking the a particular field we need to perform some operation. These events are captured by this FM. LAYOUT - This FM is used to define the layout of the List. There are many options available in this FM to define the Layout style. FIELDCAT - These are used to populate the List header. We can change them according to our req.
User-defined Text Output Event
Application
print_end_of_list
Define output text to be printed at the end of the entire list
print_top_of_list
Define output text to be printed at the beginning of the entire list
print_end_of_page
Define output text to be printed at the end of each page
print_top_of_page
Define output text to be printed at the beginning of each page
subtotal_text
Define self-defined subtotals texts
Mouse-controlled Actions in the Grid Control Event
Application
button_click
Query a click on a pushbutton in the ALV Grid Control
double_click
Query a double-click on a cell of the ALV Grid control
hotspot_click
Query a hotspot click on columns defined for this purpose in advance
onDrag
Collect information when elements of the ALV Grid Control are dragged
onDrop
Process information when elements of the ALV Grid Control are dropped
onDropComplete
Perform final actions after successful Drag&Drop
onDropGetFlavor
Distinguish between options for Drag&Drop behavior
Processing of Self-defined and Standard Functions Event
Application
before_user_command
Query self-defined and standard function codes
user_command
Query self-defined function codes
after_user_command
Query self-defined and standard function codes
Definition of Self-defined Functions Event
Application
toolbar
Change, delete or add GUI elements in the toolbar
menu_button
Define menus for menu buttons in the toolbar
context_menu_request
Change context menu
onf1
Define self-defined F1 help
All of these can be found under type group SLIS.
Events
SLIS_EV_ITEM_DATA_EXPAND TYPE SLIS_FORMNAME VALUE 'ITEM_DATA_EXPAND',
SLIS_EV_REPREP_SEL_MODIFY TYPE SLIS_FORMNAME VALUE 'REPREP_SEL_MODIFY', SLIS_EV_CALLER_EXIT_AT_START TYPE SLIS_FORMNAME VALUE 'CALLER_EXIT',
SLIS_EV_USER_COMMAND TYPE SLIS_FORMNAME VALUE 'USER_COMMAND',
SLIS_EV_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
SLIS_EV_DATA_CHANGED TYPE SLIS_FORMNAME VALUE 'DATA_CHANGED',
SLIS_EV_TOP_OF_COVERPAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_COVERPAGE',
SLIS_EV_END_OF_COVERPAGE TYPE SLIS_FORMNAME VALUE 'END_OF_COVERPAGE',
SLIS_EV_FOREIGN_TOP_OF_PAGE TYPE SLIS_FORMNAME
VALUE 'FOREIGN_TOP_OF_PAGE', SLIS_EV_FOREIGN_END_OF_PAGE TYPE SLIS_FORMNAME
VALUE 'FOREIGN_END_OF_PAGE',
SLIS_EV_PF_STATUS_SET TYPE SLIS_FORMNAME VALUE 'PF_STATUS_SET',
SLIS_EV_LIST_MODIFY TYPE SLIS_FORMNAME VALUE 'LIST_MODIFY',
SLIS_EV_TOP_OF_LIST TYPE SLIS_FORMNAME VALUE 'TOP_OF_LIST',
SLIS_EV_END_OF_PAGE TYPE SLIS_FORMNAME VALUE 'END_OF_PAGE',
SLIS_EV_END_OF_LIST TYPE SLIS_FORMNAME VALUE 'END_OF_LIST',
SLIS_EV_AFTER_LINE_OUTPUT TYPE SLIS_FORMNAME VALUE 'AFTER_LINE_OUTPUT', SLIS_EV_BEFORE_LINE_OUTPUT TYPE SLIS_FORMNAME VALUE 'BEFORE_LINE_OUTPUT',
SLIS_EV_SUBTOTAL_TEXT TYPE SLIS_FORMNAME VALUE 'SUBTOTAL_TEXT' -
Hi all
plz help with this question,if i had asimpl jsp file containing the following code:
<html>
<body>
<form method="get" action="second.jsp">
<input type="text" name="name">
<input type="text" name="age">
<input type="submit" name="submit">
</form>
</body>
</html>
and another simple jsp file containing this code:
<html>
<body>
<jsp:useBean id="bean" scope="session" class="thebeans.Bean"/>
<jsp:setProperty name="bean" property="*"/>
<jsp:getProperty name="bean" property="name"/>
<jsp:getProperty name="bean" property="age"/>
<%
bean.DataBase();
%>
</body>
</html>
DataBase() is amethod that take the input from the jsp file and connect 2 the database 2 see f it exists before
what i want 2 do is that f it exist load specific html file f not load another html file
how can i do that and where 2 write it
*(sorry still new 2 java)*thx i found the solution
Maybe you are looking for
-
Uploading pdf symbol in Dreamweaver 3
I realise that we are up to Dreamweaver 8, however I am currently using Dreamweaver 3. I know how to link to pdf documents. However, if I want to include a pdf symbol before the title / link fo the doc, is there a button that I can insert for the pdf
-
Can't open a JPEG in Adobe Camera RAW 4.3.1
I'm trying to open a jpg file from bridge to ACR using the cmnd+r combination and nothing happens. I can only view jpg files in ACR when I apply changes to them in Lightroom. Then I just double click on them (or cmnd+o) and they open in Adobe Camera
-
Opening balance differs with closing balance
Hi I have a scenario where opening and closing balance (Previous period/year)of g/l accounts are different (for differernt currencies except company code currencies) .It is a customized report where the system is taking the value of recently maintai
-
DropdownList box to display R/3 table
Hi, I want to display a R/3 table of 5 columns in the dropdownbox with only one column, how can I do that?. Is this possible without simple types. Since we dont know the contents of drop-down box at design time, I cant use simple type. How can I achi
-
Hi All, I have recently migrated from TFS 2010 to TFS 2013. When developers are accessing TFS Web interface from IE 11 they are getting message "Visual Studio Online does not support your browser. Please upgrade to a supported browser to ensure a fan