Plz provide me some documents on how to clone a database using cold backup

Dear All,
Please provide me some documents on how to clone a database using cold backup which is in archive log.
Also, please can you provide me the document to install Oracle 9.2.0.6 on Aix 5L
Thanks,
Mahipal

Please provide me some documents on how to clone a database using cold >backup which is in archive loghttp://www.oracle-base.com/articles/9i/DuplicateDatabaseUsingRMAN9i.php
please can you provide me the document to install Oracle 9.2.0.6 on Aix 5L
Oracle9i Installation Guide
Release 2 (9.2.0.1.0) for UNIX Systems: AIX-Based Systems, Compaq Tru64 UNIX, HP 9000 Series HP-UX, Linux Intel, and Sun Solaris -
http://download.oracle.com/docs/html/A96167_01/toc.htm

Similar Messages

How to Create new database from cold backup files.

Dear Experts,
I have an oracle 10g databae on windows 2003 server.
The database is in Archive log mode and backup strategy is Taking cold backup ever night.
Backup steps:
shut down database.
copy data files, control files, redo logs, archive logs and parameter files to safe location.
Startup.
I have taken a backup at Tuesdaay 1AM and I have archive logs also.
On Wednesday, I want to Create a new database on another server with the available cold backup files and archive logs. I want to recover the database upto 4PM Wednesday. How can I do this.
I am not using control file auto backup or control file backup to trace.
Please help me how can I do this. I am new to oracle database Administration.
--Thanks

The steps :
shut down database.
copy data files, control files, redo logs, archive logs and parameter files to safe location -- you mean the alternate location for the new databaseare correct (except that I would say "alternate location for the new database").
If you do not have controlfile backups, you cannot either OPEN the database or RECOVER the database until and unless you CREATE the Controlfiles. You have to generate a CREATE CONTROLFILE script using a BACKUP CONTROLFILE TO TRACE from the Production serer and create the controlfile on the new server.
BEFORE the Startup, I would use
RECOVER DATABASE USING BACKUP CONTROLFILE UNTIL CANCEL;The "using backup controlfile" tells Oracle to continue attempting Recovery -- ie doing a RollForward -- till the last archivelog made available to it.
For the Recover command, you then keep applying the ArchiveLogs from the Tuesday 1am ColdBackup upto Wednesday 4pm.
Once you have applied the last ArchiveLog, you do an
ALTER DATABASE OPEN RESETLOGS;Here are my notes of doing a RollForward "Recovery" from a Cold Backup :
http://hemantoracledba.blogspot.com/2007/05/rollforward-from-cold-backup.html
If you are attempting all these steps on a different server from your current Production database, you should be safe.
Once you OPEN the database, you can use CREATE CONTROLFILE or the NID utility to rename the database.
If you are attempting to create the new database on the same server there are many other precautions you have to take and unless you have experience with cloning databases, I would advice you against doing so (only the RMAN DUPLICATE DATABASE command has a safer method of cloning a database).
Hemant K Chitale
http://hemantoracledba.blogspot.com

HT1414 i got an iphone from uk,but i cant access it here,plz provide me some help to access it

i got an iphone from uk,but i cant access it here,plz provide me some help to access it

What do you mean "cant access it"?

HOW TO START MAKING DATABASE USING ORACLE SQL PLUS in 10g?

how will i create database using sql plus?
does the code of sql applicable to it..?
do i have to use the "create db <database name>", use and " create table also,.."
pls help me..
thanks

At dos prompt :
C:\>set ORACLE_SID=<your SID>
C:\>sqlplus / as sysdba
you get connected as sys user. Don't use this connection to create your own objects, create users instead.... but it would be useful to read some documentation, for example Starting SQL*Plus and manuals mentioned there.

How to connect oracle database using jsf

how to connect oracle database using javaserver faces with connection pooling

Here is one way...
http://jakarta.apache.org/commons/dbcp/

How to connect mysql database using xml

welcome to all,
here my doubt is how to connect mysql database using xml file, how to integrate xml file and jsp file and how to access data from dabase using jsp file. can any one help me
regards

Short answer: you wouldn't do any of those things. The first two are meaningless and the third is a bad practice. I have no idea what those ideas were supposed to achieve so I have no idea what tutorials I should suggest to you.

Hi can anyone explain me how to syncronize two database using jsp?

Hi can anyone explain me how to syncronize two database using jsp?

I thinking than you really need the jsp page for calling the java methods whith sincronize the database.You think wrong.
You wrote a bad question.What was bad about it?
You need a java method for sincronize the two databases using a jsp page.No you don't, see my answer.

How to access remote database using applet

hi all,
I want to know how to access remote database using applet,
Please help me anybody.
Regards
Jesu

If the database is on a public server, you probably can't access it directly (security wise). You can make your applet talk to a server-side application, which makes the database calls on behalf of the applet. But even in an intranet environment this setup is often preferable, because you don't need to distribute a JDBC driver to all your clients.

How to connect Oracle database using TOAD Database toll

Hello ALL,
I have installed oracle 9i and TOAD in my machine.
I want to connect oracle9i using TOAD database toll.
How can i able to connect Oracle9i using TOAD database toll?What is the code i will change in tnsnames.ora so that i am able to connect scott/tiger database using TOAD?
tnsnames.ora*
SUMANTA.IN002.SIEMENS.NET =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = BLRD025AL1)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = sumanta)
Please suggest.
Thanks for your time.
Regards,
Sumanta

user2367151 wrote:
Hello ALL,
I have installed oracle 9i and TOAD in my machine.
I want to connect oracle9i using TOAD database toll.
How can i able to connect Oracle9i using TOAD database toll?What is the code i will change in tnsnames.ora so that i am able to connect scott/tiger database using TOAD?
tnsnames.ora*
SUMANTA.IN002.SIEMENS.NET =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = BLRD025AL1)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = sumanta)
Please suggest.
Thanks for your time.
Regards,
SumantaIf you have a listener on host BLRD025AL1, and that listener knows about a service named 'sumanta', then you don't need to do anything to your tnsnames.ora to use it with Toad -- or any other client tool. You just have to provide the correct connect string.
What have you actually tried?
What result did you get?
Any oracle errors (ora-nnnnn or tns-nnnnn)?

How to connect Oracle database using C/C++ on Mac OS X PPC G4, XCode 2.4.1?

Hi All,
How to connect the Oracle database using C/C++ on Mac OS X? I have used Instant Client library "instantclient-basic-macosx-10.1.0.3" provided by the Oracle but could not be success. I'm using PowerPC G4, Mac OS X 10.4.9, and XCode version 2.4.1.
Specially Mr Oscar Armanini has done this in C on Mac OS X. Please let me know. I would be very thankful to you.
Thanks,
Ghufran

Hi Ghufran
there are two Metalink Notes on using Instant Client with PowerPc Mac:
https://metalink.oracle.com/metalink/plsql/showDoc?db=NOT&id=316497.1
How to Install, Configure and Test Oracle 10g Instant Client Basic,
SQL*Plus and SDK Packages for Mac OS X
(Runs OCI sample code - cdemo81.c)
https://metalink.oracle.com/metalink/plsql/showDoc?db=NOT&id=332588.1
How to Install, Configure and Test Oracle 10g Instant Client Basic,
SQL*Plus and SDK Packages for Mac OS X
(Runs OCCI sample code - occidml.cpp)
The first Metalink Note uses an OCI examples and it is pasted here below,
in case you don't have a Metalink ID.
The second Metalink Note uses an OCCI example.
I have never used Instant Client (neither on Os X or on other platform),
but I was successful on compiling C programs (no GUI involved) using the
Full Client installed on my PowerBook G4.
I'm a DBA, but I was a developer years ago (about when Oracle 7.3
was considered a giant step forward): I installed the Oracle 10.1 db
(a complicated job for a developer) and I got the Full Client
installed as well, for free, so I was happy to compile one of the demo C sources
(those that you can find in the Oracle Pro*C manuals:
by the way, Oracle Pro*C manuals are really worth reading).
Good luck
Oscar
Applies to: Oracle Server - Enterprise Edition - Version: 10.1.0.3
Apple Macintosh PowerPC
Goal
This article will show you how to install and configure your 10g Instant Client (IC) Software for the Mac.
It will install the following packages:
the Basic package
the SQL*Plus package and
the SDK package
and then test its connectivity to an Oracle database using SQL*Plus.
It will also show you how to setup and test a sample program, cdemo81.c, that uses the Oracle Call Interface (OCI)
to connect to the database.
The sample program is located under the <Instant_Client>/sdk/demo directory.
Solution1. Download the following three (3) files from the Oracle Technology Network (OTN) website.
You will need an account to do this.
Macintosh OS X 10g Instant Client Software
a. instantclient-basic-macosx-10.1.0.3.zip (32,395,622 bytes)
b. instantclient-sqlplus-macosx-10.1.0.3.zip (326,740 bytes)
c. instantclient-sdk-macosx-10.1.0.3.zip (293,913 bytes)
NOTE: The above three (3) files will be updated as new patches are released for the 10g Instant Client software. 10.1.0.3 or later versions (10.1.0.x) of these files may be used similarly with this article.
2. Save the following text into a file called tnsnames.ora:
# If you receive an
# ORA-12154: TNS:could not resolve the connect identifier specified
# error when running the setup script and attempting to connect to Oracle
# from SQL*Plus then the name of your SERVICE NAME (i.e. ORCL) may require
# that you include the DOMAIN (i.e. US.ORACLE.COM) in order to connect successfully.
# To obtain the DOMAIN of your environment, type "hostname" from your shell
# and it should report this information back to you. Configure your SERVICE
# NAME to look like Example 2.
# Example 1
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = database_machine.us.oracle.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SID = orcl)
# Example 2
#ORCL.US.ORACLE.COM =
# (DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = database_machine.us.oracle.com)(PORT = 1521))
# (CONNECT_DATA =
# (SERVER = DEDICATED)
# (SID = orcl)
3. Save the following text into a file called sqlplus_script.sql:
SELECT user FROM dual;
SELECT sysdate FROM dual;
SELECT 'successful ' AS TEST_RESULTS FROM dual;
exit;
4. Save the following text into a file called setup1:
# ===========================================
# MAC OS X INSTANT CLIENT 10g SCRIPT - SETUP1
# ===========================================
# DESCRIPTION
# ===========
# This script will install and configure your 10g Instant Client (IC) Software
# for the Mac. It will install the Basic, SQL*Plus and SDK (OCI/OCCI) packages
# and then test its connectivity to an Oracle database using SQL*Plus.
# Once this script has completed, you will need to run the script SETUP2 to build
# and run the CDEMO81.C sample application located under the <IC>/sdk/demo folder
# in your newly installed Instant Client home.
# NOTE: In order for this script to run successfully, you MUST perform any
# necessary actions required under the SETUP section below.
# SETUP
# =====
# (1) You MUST be in a directoy with ALL of the following files
# BEFORE running this script:
# 1 - instantclient-basic-macosx-10.1.0.3.zip
# 2 - instantclient-sqlplus-macosx-10.1.0.3.zip
# 3 - instantclient-sdk-macosx-10.1.0.3.zip
# 4 - tnsnames.ora (configured properly)
# 5 - sqlplus_script.sql (connectivity test)
# 6 - setup1 (this file)
# 7 - setup2 (will run this file later)
# (2) Edit the TNSNAMES.ORA file and update it with the necessary information
# to connect to a database on your network. Be sure to note the comments
# in this file. You will have to change the following information:
# SERVICE NAME (orcl or orcl.us.oracle.com)
# HOST (database_machine.us.oracle.com)
# PORT (1521)
# SID (orcl)
# (3) Go to the end of this scrip and modify the following line:
# ./instantclient10_1/sqlplus scott/tiger@orcl @sqlplus_script.sql
# Replace "orcl" with the SERVICE NAME you used in step (2) above.
# (4) To run this script use the command: ". setup1"
# BEGINNING OF SCRIPT
# output this file to your shell
echo
echo MAC OS X INSTANT CLIENT 10g SCRIPT - SETUP1
echo
#more setup1
# output the TNSNAMES.ORA file to your shell
echo TNSNAMES.ORA FILE
echo
more tnsnames.ora
# remove the instantclient10_1 directory should it exist
echo
echo CHECKING FOR instantclient10_1 DIRECTORY...
echo WILL REMOVE DIRECTORY IF IT ALREADY EXISTS
echo
rm -d -f -R instantclient10_1
# extract the instantclient software (basic, sql*plus & sdk)
echo
echo
echo INSTALLING SOFTWARE...
echo
echo BASIC
echo
unzip instantclient-basic-macosx-10.1.0.3.zip
echo
echo SQL*PLUS
echo
unzip instantclient-sqlplus-macosx-10.1.0.3.zip
echo
echo SDK
echo
unzip instantclient-sdk-macosx-10.1.0.3.zip
# set the following environment variables
# Uncomment if you want a way to find the Instant Client (IC) home quickly
#export IC=$PWD/instantclient10_1
# Dynamic Library path required to use the Instant Client (IC) software
export DYLD_LIBRARY_PATH=$PWD/instantclient10_1
# TNS_ADMIN is required if using the TNSNAMES.ORA file (recommended)
export TNS_ADMIN=$PWD/instantclient10_1
# display the modified environment variables
echo
echo SETTING ENVIRONMENT VARIABLES
echo
echo DYLD_LIBRARY_PATH
echo $DYLD_LIBRARY_PATH
echo
echo TNS_ADMIN
echo $TNS_ADMIN
# display all environment variables
#echo
#echo ALL ENVIRONMENT VARIABLES
#echo
#env
# copy the TNSNAMES.ORA to the instantclient directory
echo
echo COPYING TNSNAMES.ORA TO INSTANT CLIENT [IC] DIRECTORY
echo
cp tnsnames.ora ./instantclient10_1/tnsnames.ora
# list the contents of the IC directory to see what has been installed
echo
echo INSTANT CLIENT [IC] DIRECTORY
echo
ls ./instantclient10_1
echo
# SQL*Plus Connectivity Test
# To connect to the database specified in your TNSNAMES.ORA file change the
# SERVICE NAME (i.e. orcl) below to the name of the entry in your TNSNAMES.ORA
# file designating the specific database in which you want to connect to
echo
echo SQL*PLUS CONNECTIVITY TEST
./instantclient10_1/sqlplus scott/tiger@orcl @sqlplus_script.sql
# Alternately, you can connect from SQL*Plus to Oracle without using a TNSNAMES.ORA
# file. You can embed the NAME-VALUE pair of the SERVICE NAME from the TNSNAMES.ORA
# file directly into the connection string making sure to use the proper HOST, PORT
# and SID like so:
#./instantclient10_1/sqlplus scott/tiger@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=database_machine.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
5. Save the following text into a file called setup2:
# ===========================================
# MAC OS X INSTANT CLIENT 10g SCRIPT - SETUP2
# ===========================================
# DESCRIPTION
# ===========
# This script will build and run the OCI sample application CDEMO81.C inside
# your Instant Client (IC) software located under the <IC>/sdk/demo folder.
# NOTE: In order for this script to run successfully
# (A) you MUST have already run the script SETUP1 successfully
# and
# (B) you MUST perform any necessary actions required under the SETUP
# section below.
# SETUP
# =====
# (1) You need to edit the CDEMO81.C application PRIOR to running this script to
# change the connection information. By default, the application will attempt
# to connect as user SCOTT with password TIGER to a local Oracle database using
# the BEQ-LOCAL network protocol. This will not work.
# (A) You need to make sure you have the SCOTT/TIGER schema created in your database.
# If not, have your DBA create it by running the script "SCOTT.SQL" from your
# <ORACLE_HOME>/rdbms/admin folder.
# (B) You need to modify the CDEMO81.C application to connect to the database
# you have configured inside your TNSNAMES.ORA file.
# (i) Open the CDEMO81.C file located under the <IC>/sdk/demo folder.
# (ii) Find the following line of code:
# (void) OCIServerAttach( srvhp, errhp, (text *)"", strlen(""), 0);
# and change the two empty strings to the SERVICE NAME you are using like so
# (void) OCIServerAttach( srvhp, errhp, (text *)"ORCL", strlen("ORCL"), 0);
# (iii) Save the file.
# (2) You MUST be in the initial directory where you copied all of the files listed
# in script SETUP1. In this same location you will find SETUP2. Run SETUP2 from
# this location.
# (3) To run this script use the command: ". setup2"
# BEGINNING OF SCRIPT
# output this file to your shell
echo
echo MAC OS X INSTANT CLIENT 10g SCRIPT - SETUP2
echo
#more setup2
# output the TNSNAMES.ORA file to your shell
echo TNSNAMES.ORA FILE
echo
more tnsnames.ora
# output the username, password and service name from CDEMO81.C file to your shell
echo
echo USERNAME, PASSWORD AND SERVICE NAME INFO FROM YOUR OCI cdemo81.c FILE
echo
#more ./instantclient10_1/sdk/demo/cdemo81.c
grep -i "*username" ./instantclient10_1/sdk/demo/cdemo81.c
grep -i "*password" ./instantclient10_1/sdk/demo/cdemo81.c
grep -i OCIServerAttach ./instantclient10_1/sdk/demo/cdemo81.c
# display the required environment variables
#env
echo
echo REPORTING REQUIRED ENVIRONMENT VARIABLES
echo
echo DYLD_LIBRARY_PATH
echo $DYLD_LIBRARY_PATH
echo
echo TNS_ADMIN
echo $TNS_ADMIN
# move to the sdk/demo directory
cd ./instantclient10_1/sdk/demo
echo
echo CHANGING TO [IC]/SDK/DEMO DIRECTORY
echo
ls
# run demo application
echo
echo ATTEMPTING TO RUN APPLICATION
echo
echo BUILDING APPLICATION USING PROVIDED MAKE FILE, [IC]/sdk/demo/demo.mk...
echo
make -f demo.mk
echo
echo
echo INSTANT CLIENT [IC] DIRECTORY...
echo
ls ../..
echo
echo CREATING links FOR REQUIRED LIBRARIES IN INSTANT CLIENT [IC] FOLDER...
echo
echo - libclntsh.dylib
echo - libocci.dylib
ln ../../libclntsh.dylib.10.1 ../../libclntsh.dylib
ln ../../libocci.dylib.10.1 ../../libocci.dylib
echo
echo INSTANT CLIENT [IC] DIRECTORY WITH links CREATED...
echo
ls ../..
echo
echo
echo EXECUTING APPLICATION...
echo
cdemo81
echo
echo
# TROUBLE-SHOOTING
# If you receive the following error messages:
# Error - ORA-24327: need explicit attach before authenticating a user
# Error - ORA-03114: not connected to ORACLE
# Then you did not modify the CDEMO81.C application with proper SERVICE NAME
# information. See step 1B under the SETUP section in this script to resolve
# this error.
6. Take all seven (7) files and move them into the same directory on your OS where you want to install the Instant Client software from:
1 - instantclient-basic-macosx-10.1.0.3.zip
2 - instantclient-sqlplus-macosx-10.1.0.3.zip
3 - instantclient-sdk-macosx-10.1.0.3.zip
4 - tnsnames.ora
5 - sqlplus_script.sql
6 - setup1
7 - setup2
7. Open the file tnsnames.ora. Be sure to review the comments in this file. You will have to change the following information to connect to a database on your network:
SERVICE NAME (orcl or orcl.us.oracle.com)
HOST (database_machine.us.oracle.com)
PORT (1521)
SID (orcl)
Save the file.
8. Open the file setup1, go to the end of this script and modify the following line:
./instantclient10_1/sqlplus scott/tiger@orcl @sqlplus_script.sql
Replace orcl with the SERVICE NAME you used in Step 7 above. Save the file.
9. You are now ready to install the 10g Instant Client software for Mac OS X. From the location where your seven (7) files reside, issue the following command:
[macosx]/oracle> . setup1
NOTE: Be sure to include the period "." and a space " " before the word "setup1" so all environment variables persist for the current session.
This will install the Instant Client Basic and SQL*Plus software and connect to the database specified in the tnsnames.ora file.
10. Here is the sample output of a successful execution of the setup1 script:
[macosx]/oracle> . setup1
MAC OS X INSTANT CLIENT 10g SCRIPT - SETUP1
TNSNAMES.ORA FILE
# If you receive an
# ORA-12154: TNS:could not resolve the connect identifier specified
# error when running the setup script and attempting to connect to Oracle
# from SQL*Plus then the name of your SERVICE NAME (i.e. ORCL) may require
# that you include the DOMAIN (i.e. US.ORACLE.COM) in order to connect successfully.
# To obtain the DOMAIN of your environment, type "hostname" from your shell
# and it should report this information back to you. Configure your SERVICE
# NAME to look like Example 2.
# Example 1
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = gbednars-pc.us.oracle.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SID = orcl)
# Example 2
#ORCL.US.ORACLE.COM =
# (DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = gbednars-pc.us.oracle.com)(PORT = 1521))
# (CONNECT_DATA =
# (SERVER = DEDICATED)
# (SID = orcl)
CHECKING FOR instantclient10_1 DIRECTORY...
WILL REMOVE DIRECTORY IF IT ALREADY EXISTS
INSTALLING SOFTWARE...
BASIC
Archive: instantclient-basic-macosx-10.1.0.3.zip
inflating: instantclient10_1/classes12.jar
inflating: instantclient10_1/libclntsh.dylib.10.1
inflating: instantclient10_1/libnnz10.dylib
inflating: instantclient10_1/libocci.dylib.10.1
inflating: instantclient10_1/libociei.dylib
inflating: instantclient10_1/libocijdbc10.dylib
inflating: instantclient10_1/ojdbc14.jar
SQL*PLUS
Archive: instantclient-sqlplus-macosx-10.1.0.3.zip
inflating: instantclient10_1/README_IC.htm
inflating: instantclient10_1/glogin.sql
inflating: instantclient10_1/libsqlplus.dylib
inflating: instantclient10_1/sqlplus
SDK
Archive: instantclient-sdk-macosx-10.1.0.3.zip
creating: instantclient10_1/sdk/
creating: instantclient10_1/sdk/demo/
inflating: instantclient10_1/sdk/demo/cdemo81.c
inflating: instantclient10_1/sdk/demo/demo.mk
inflating: instantclient10_1/sdk/demo/occidemo.sql
inflating: instantclient10_1/sdk/demo/occidemod.sql
inflating: instantclient10_1/sdk/demo/occidml.cpp
creating: instantclient10_1/sdk/include/
inflating: instantclient10_1/sdk/include/nzerror.h
inflating: instantclient10_1/sdk/include/nzt.h
inflating: instantclient10_1/sdk/include/occi.h
inflating: instantclient10_1/sdk/include/occiAQ.h
inflating: instantclient10_1/sdk/include/occiCommon.h
inflating: instantclient10_1/sdk/include/occiControl.h
inflating: instantclient10_1/sdk/include/occiData.h
inflating: instantclient10_1/sdk/include/occiObjects.h
inflating: instantclient10_1/sdk/include/oci.h
inflating: instantclient10_1/sdk/include/oci1.h
inflating: instantclient10_1/sdk/include/oci8dp.h
inflating: instantclient10_1/sdk/include/ociap.h
inflating: instantclient10_1/sdk/include/ociapr.h
inflating: instantclient10_1/sdk/include/ocidef.h
inflating: instantclient10_1/sdk/include/ocidem.h
inflating: instantclient10_1/sdk/include/ocidfn.h
inflating: instantclient10_1/sdk/include/ociextp.h
inflating: instantclient10_1/sdk/include/ocikpr.h
inflating: instantclient10_1/sdk/include/ocixmldb.h
inflating: instantclient10_1/sdk/include/odci.h
inflating: instantclient10_1/sdk/include/oratypes.h
inflating: instantclient10_1/sdk/include/ori.h
inflating: instantclient10_1/sdk/include/orid.h
inflating: instantclient10_1/sdk/include/orl.h
inflating: instantclient10_1/sdk/include/oro.h
inflating: instantclient10_1/sdk/include/ort.h
inflating: instantclient10_1/sdk/include/xa.h
SETTING ENVIRONMENT VARIABLES
DYLD_LIBRARY_PATH
/oracle/instantclient10_1
TNS_ADMIN
/oracle/instantclient10_1
COPYING TNSNAMES.ORA TO INSTANT CLIENT [IC] DIRECTORY
INSTANT CLIENT [IC] DIRECTORY
README_IC.htm libocci.dylib.10.1 sdk/
classes12.jar libociei.dylib* sqlplus*
glogin.sql libocijdbc10.dylib* tnsnames.ora
libclntsh.dylib.10.1* libsqlplus.dylib*
libnnz10.dylib ojdbc14.jar
SQL*PLUS CONNECTIVITY TEST
SQL*Plus: Release 10.1.0.3.0 - Production on Fri Aug 19 15:26:08 2005
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
USER
SCOTT
SYSDATE
19-AUG-05
TEST_RESULTS
successful
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
IF THE SQL*PLUS CONNECTIVITY TEST WAS SUCCESSFUL
READ SETUP2 TO CONFIGURE AND RUN THE OCI cdemo81.c SAMPLE
[macosx]/oracle>
11. Once you have obtained a successful execution of the setup1 script, you are ready to configure cdemo81.c to connect to the database you have configured inside your tnsnames.ora file.
Open the cdemo81.c file located under the <Instant_Client>/sdk/demo folder. Find the following line of code:
(void) OCIServerAttach( srvhp, errhp, (text *)"", strlen(""), 0);
Change the two (2) empty strings to the SERVICE NAME you used in Step 7 above.
(void) OCIServerAttach( srvhp, errhp, (text *)"ORCL", strlen("ORCL"), 0);
Save the file.
12. You are now ready to run cdemo81.c. You MUST issue the following command from the initial directory where you copied all of the files in Step 6:
[macosx]/oracle> . setup2
NOTE: Be sure to include the period "." and a space " " before the word "setup2" so all environment variables persist for the current session.
This script will configure your environment, build and run the OCI sample code connecting to the database specified in the tnsnames.ora file.
13. Here is the sample output of a successful execution of the setup2 script:
[macosx]/oracle> . setup2
MAC OS X INSTANT CLIENT 10g SCRIPT - SETUP2
TNSNAMES.ORA FILE
# If you receive an
# ORA-12154: TNS:could not resolve the connect identifier specified
# error when running the setup script and attempting to connect to Oracle
# from SQL*Plus then the name of your SERVICE NAME (i.e. ORCL) may require
# that you include the DOMAIN (i.e. US.ORACLE.COM) in order to connect successfully.
# To obtain the DOMAIN of your environment, type "hostname" from your shell
# and it should report this information back to you. Configure your SERVICE
# NAME to look like Example 2.
# Example 1
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = gbednars-pc.us.oracle.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SID = orcl)
# Example 2
#ORCL.US.ORACLE.COM =
# (DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = gbednars-pc.us.oracle.com)(PORT = 1521))
# (CONNECT_DATA =
# (SERVER = DEDICATED)
# (SID = orcl)
USERNAME, PASSWORD AND SERVICE NAME INFO FROM YOUR OCI cdemo81.c FILE
static text username = (text ) "SCOTT";
static text password = (text ) "TIGER";
(void) OCIServerAttach( srvhp, errhp, (text *)"ORCL", strlen("ORCL"), 0);
REPORTING REQUIRED ENVIRONMENT VARIABLES
DYLD_LIBRARY_PATH
/oracle/instantclient10_1
TNS_ADMIN
/oracle/instantclient10_1
CHANGING TO [IC]/SDK/DEMO DIRECTORY
cdemo81.c* demo.mk occidemo.sql occidemod.sql occidml.cpp
ATTEMPTING TO RUN APPLICATION
BUILDING APPLICATION USING PROVIDED MAKE FILE, [IC]/sdk/demo/demo.mk...
rm -rf SunWS_cache
rm -rf ../../libclntsh.dylib
rm -rf ../../libocci.dylib
rm -rf cdemo81 cdemo81.o occidml occidml.o
/usr/bin/gcc -c -I../include -I/rdbms/public/ -I/oracore/include -I/oracore/publ
ic -I/oracore/port/include -I/nlsrtl/include -I/plsql/public -I/plsql/include -I
/network/public -I/network/include -I/otrace/public -I/otrace/include/ -I/precom
p/public -I/precomp/include/ -I/slax/include -I/ordts/public -I/ordts/include -I
/javavm/include -I/javavm/include/osds/unix/solaris -I/ctx/public -I/ordvir/publ
ic -I/ordvir/include -idirafter . -g -DRE_ENTRANT -DOCCI_NO_WSTRING=1 -DMAC_O
SX -D_GNU_SOURCE -DSLTS_ENABLE -DSLMXMX_ENABLE -D_REENTRANT -DNS_THREADS -D_BCER
T_API_ -DRSA_PLATFORM=RSA_PLATFORM_MAC_PPC_DARWIN -DNTEV_USE_POLL -DNTEV_USE_GE
NERIC -DNET_USE_LDAP -DOCCI cdemo81.c
ln ../../libclntsh.dylib.10.1 ../../libclntsh.dylib
ln ../../libocci.dylib.10.1 ../../libocci.dylib
/usr/bin/g++ -o cdemo81 cdemo81.o -L../../ -locci -lclntsh -lpthread
rm -rf ../../libclntsh.dylib
rm -rf ../../libocci.dylib
/usr/bin/g++ -c -I../include -I/rdbms/public/ -I/oracore/include -I/oracore/publ
ic -I/oracore/port/include -I/nlsrtl/include -I/plsql/public -I/plsql/include -I
/network/public -I/network/include -I/otrace/public -I/otrace/include/ -I/precom
p/public -I/precomp/include/ -I/slax/include -I/ordts/public -I/ordts/include -I
/javavm/include -I/javavm/include/osds/unix/solaris -I/ctx/public -I/ordvir/publ
ic -I/ordvir/include -idirafter . -g -DRE_ENTRANT -DOCCI_NO_WSTRING=1 -DMAC_O
SX -D_GNU_SOURCE -DSLTS_ENABLE -DSLMXMX_ENABLE -D_REENTRANT -DNS_THREADS -D_BCER
T_API_ -DRSA_PLATFORM=RSA_PLATFORM_MAC_PPC_DARWIN -DNTEV_USE_POLL -DNTEV_USE_GE
NERIC -DNET_USE_LDAP -DOCCI occidml.cpp
In file included from ../include/occi.h:43,
from occidml.cpp:11:
../include/occiData.h:411: warning: use of `long double' type; its size may
change in a future release
../include/occiData.h:411: warning: (Long double usage is reported only once
for each file.
../include/occiData.h:411: warning: To disable this warning, use
-Wno-long-double.)
ln ../../libclntsh.dylib.10.1 ../../libclntsh.dylib
ln ../../libocci.dylib.10.1 ../../libocci.dylib
/usr/bin/g++ -o occidml occidml.o -L../../ -locci -lclntsh -lpthread
rm -rf ../../libclntsh.dylib
rm -rf ../../libocci.dylib
INSTANT CLIENT [IC] DIRECTORY...
README_IC.htm libocci.dylib.10.1 sdk/
classes12.jar libociei.dylib* sqlplus*
glogin.sql libocijdbc10.dylib* tnsnames.ora
libclntsh.dylib.10.1* libsqlplus.dylib*
libnnz10.dylib ojdbc14.jar
CREATING links FOR REQUIRED LIBRARIES IN INSTANT CLIENT [IC] FOLDER...
- libclntsh.dylib
- libocci.dylib
INSTANT CLIENT [IC] DIRECTORY WITH links CREATED...
README_IC.htm libnnz10.dylib libsqlplus.dylib*
classes12.jar libocci.dylib ojdbc14.jar
glogin.sql libocci.dylib.10.1 sdk/
libclntsh.dylib* libociei.dylib* sqlplus*
libclntsh.dylib.10.1* libocijdbc10.dylib* tnsnames.ora
EXECUTING APPLICATION...
Enter employee name (or CR to EXIT): LARRY
Enter employee job: CEO
Enter employee salary: 10000
Enter employee dept: 40
LARRY added to the OPERATIONS department as employee number 7974
Enter employee name (or CR to EXIT):
Exiting...
[macosx]/oracle/instantclient10_1/sdk/demo>
14. If you have any problems running this script please open a Service Request (SR) with Oracle Support for further assistance and be sure to upload the output from the script to the SR.
ReferencesNote
332588.1 - How to Install, Configure and Test Oracle 10g Instant Client Basic, SQL*Plus and SDK Packages for Mac OS X (Runs OCCI sample code - occidml.cpp)
Errors
ORA-3114 "not connected to ORACLE"
ORA-24327 need explicit attach before authenticating a user
ORA-12154 "TNS:could not resolve service name"

How to connect to database using jdeveloper

Please send some info how to connect to the oracle database using jdeveloper

Go to the CONNECTIONS tab in Jdeveloper (look under the view menu if its not available). Right click on the database node and create NEW CONNECTION.
Also do a search on the help for DATABASE CONNECTIONS
Regards
Grant Ronald
oracle Product Management

How to reduce the cloning time if using cold backup?

Hi,
We are using EBS r12 (12.0.6) with database 10.2.0.3 in Linux Redhat 4 32-bit envoirnment.
Our datbase size is around 480 GB and we are facing the issues to provide the clone to my consultants for meet the target timelines in given time.
(Source:)---- Production Dell R900 Server machine having 32-GB RAM and 8 Quard Core CPU's.
(Target:)---- Clone Dell 2950 Server machine having 16-GB RAM and 4-Quard Core CPU's.
Currectly we are taking cold backup like:
1: Auto shutdown EBS r12 database nighthy at 12:00 AM daily and compress the backup using tar utility in linux. This process takes 6:00 hours aprox:
2: After that we move compressed file to clone machine and then uncompressed it, and this process takes 5:00 hours aprox.
3: And performe standard cloning steps.
Questions:
1: How to reduce time of this backup process?
3: Is there any other way to reduce the cloning process.
2: What type of backup oracle recommended to their customers for this type of process?
Thanks.

1: How to reduce time of this backup process?Without using third party tools, it might be hard to tune the timing of compressing/uncompressing the file.
Have you tried to use scp command? This would help if your network throughput is acceptable.
3: Is there any other way to reduce the cloning process.Since the main issue you have with the copy, then you might copy the files remotely from the source to the target, or using any other storage/backup tools (like file system snapshot).
2: What type of backup oracle recommended to their customers for this type of process?Oracle does not recommend any type of backup as the tools used are not Oracle products.
Thanks,
Hussein

How to create sql database using java frame or appelet?

hi ! i am working on database project i want to create a database using java frame or applet where it asks user to select the location for database to be created , after user have specified the path then the programs creates the database, again i want that database to be read and write by another frame or applet but as user select the path how do i make the connectivity. i just have basic knowledge on java. please give me idea how can i process further.
thanks a lot

While duffymo is correct in regard to most major database products, it's my understanding (warning! wild-ass guess coming) that the Hypersonic DB is more "application-centric" and the dynamic creation of databases is part of its design. It's pure Java database software, and therefore is not appropriate for all database projects, in particular those that require extremely high-performance.
See http://hsqldb.org/
I've not used it yet (but soon though), and I can't really advise anyone about it.
However, I'm wondering if you phrased you question in a way that is confusing us. To most of us in casual conversation, a "database" is both (1) a large organized collection of data and (2) the software that is used to organize and access it. However, the phrase "create a database" usually means creating a (1) database (a collection of data) using an already created (2) database software, such as Oracle, MySQL, DB2, HSQDB, etc., etc. If you'r question is, how do a create some new database software using Java, the answer is that this is a very very big and hard thing to do for the general case and probably not something you want to be doing.

How do I move databases using RMAN with minimal downtime ?

How can I do the following using RMAN ?
DB version 10.2.0.4
Redhat 5.2
I am not using an rman catalogIn the past I have moved large databases from 1 server to another with 5 minutes downtime using backups done the old way by putting tablespaces in backup mode and making copies of the datafiles.
I used the following method :
========> Part 1
STARTUP NOMOUNT
CREATE CONTROLFILE REUSE set DATABASE "VPMY" RESETLOGS ARCHIVELOG
MAXLOGFILES 32
MAXLOGMEMBERS 3
....etc
LOGFILE
......... log file names
DATAFILE
... list of datafiles
CHARACTER SET US7ASCII;
========> Part 2
Up until the scheduled downtime, I would copy the archive logs from the production server to the new and run the following to apply the latest archive logs:
RECOVER DATABASE USING BACKUP CONTROLFILE UNTIL CANCEL;
->AUTO<-
========> Part 3
After applying the last archive log while in restrict mode -
ALTER DATABASE OPEN resetlogs;
My question is, how do I do Part 2 in RMAN. I have managed to duplicate databases and restore databases using rman to a different server, but this obviously only covers the data upto the backup point. How can I do the above parts 1 -3 with downtime of about 5 minutes like I have done using old methods ?
Any help is much appreciated/

you should be able to recover as you go with rman as well..
copy the archived logs from A to B and apply them as they come in.
run
set until sequence x thread 1;
recover database;
if you're not opening the database after recovery you can just increment the set until sequence as the logs come in and do a new recovery.

How to do media recovery from cold backup?????????/

Hi
i take cold backup of my 9i database ....
in case my database is up .....
how will i recover my database if i lose a single database file and i want to recover it from cold backup......
Thanks in advance
Gagan

Here you go
These are the steps:
1. Restore the lost file from a backup.
2. If the database is down, mount it.
SVRMGR> STARTUP MOUNT PFILE=<location_of_pfile>;
3. Issue the following query:
SVRMGR> SELECT V1.GROUP#, MEMBER, SEQUENCE#,
FIRST_CHANGE#
FROM V$LOG V1, V$LOGFILE V2
WHERE V1.GROUP# = V2.GROUP# ;
This will list all your online redolog files and their respective
sequence and first change numbers.
4. If the database is in NOARCHIVELOG mode, issue the query:
SVRMGR> SELECT FILE#, CHANGE# FROM V$RECOVER_FILE;
If the CHANGE# is GREATER than the minimum FIRST_CHANGE# of your logs,
the datafile can be recovered. Just keep in mind that all the logs to
applied will be online logs, and move on to step 5.
If the CHANGE# is LESS than the minimum FIRST_CHANGE# of your logs, the
file cannot be recovered. Your options at this point would be to restore
the most recent full backup (and thus lose all changes to the database
since) or recreate the tablespace as explained in scenario a.
5. Recover the datafile:
SVRMGR> RECOVER DATAFILE '<full_path_file_name>'
6. Confirm each of the logs that you are prompted for until you receive the
message "Media recovery complete". If you are prompted for a non-existing
archived log, Oracle probably needs one or more of the online logs to
proceed with the recovery. Compare the sequence number referenced in the
ORA-280 message with the sequence numbers of your online logs. Then enter
the full path name of one of the members of the redo group whose sequence
number matches the one you are being asked for. Keep entering online logs
as requested until you receive the message "Media recovery complete"
7. If the database is at mount point, open it.

Plz provide me some documents on how to clone a database using cold backup

Similar Messages

Maybe you are looking for