Plz: Replication 9i Job Network Problem Hang

Hi ,This problem is posted on this forum by other users
but all of them remained unresponsed!
I hope somebody will help me now:
I have a hang problem in 9i
We are using bidirectional Replication (Materialized View Replication)
and when mview refresh group is being refreshed if there happens a network problem( on the VPN) then our refresh job seems to hang, it will never end (once we waited a week but nothing happened) and the materialized views remain locked
the session won't be killed at all, the only way for us is to restart the database,
I hope there is a better way or some settings to prevent this.
somebody help me please

Personally, I've never seen this behavior. If other reports of the same problem in the forum haven't been answered, it's likely because none of the folks that answer questions here have seen this behavior elsewhere.
Have you logged a TAR in Metalink? It certainly sounds like a bug. Have you tried upgrading to the latest patchset?
Justin

Similar Messages

Strange network problem - it hangs.

Hello,
I have experienced strange problem with network. I'm searching for solution (in Internet) for about a month.
What is happening:
When I start browser and start to browsing, network sometimes hang - when I click on link nothing is happening - I have to refresh page two or three times to get it back. Sometimes it hangs on sending a request, and sometimes on downloading page content.
I'm using Kadu as my IM and it gives me communication errors every one or two minutes, very often it drops messages.
When I installing sometimes, or upgrading system pacman reporting download error - when I download 10 packages always about three have those errors, then I must download them again.
Ping work's well.
ping -c 5 google.com
PING google.com (74.125.43.99) 56(84) bytes of data.
64 bytes from bw-in-f99.1e100.net (74.125.43.99): icmp_seq=1 ttl=52 time=46.2 ms
64 bytes from bw-in-f99.1e100.net (74.125.43.99): icmp_seq=2 ttl=52 time=47.0 ms
64 bytes from bw-in-f99.1e100.net (74.125.43.99): icmp_seq=3 ttl=52 time=46.5 ms
64 bytes from bw-in-f99.1e100.net (74.125.43.99): icmp_seq=4 ttl=52 time=46.4 ms
64 bytes from bw-in-f99.1e100.net (74.125.43.99): icmp_seq=5 ttl=52 time=46.1 ms
I have try this solution:
http://wiki.archlinux.org/index.php/Con … ling_issue
but this also won't work.
Problem appears on lan and on wlan (tested on two usb cards) connections - I have also tried connection by wicd and networkmanager - same problem.
Then I have borrow laptop from my friend, installed and configured Arch - and same problem.
I have buy some celeron (S478 2,66ghz) PC (for test) - and I have experienced same problem here.
I have tried opendns, google dns, and I have setted dns same as my router IP, same problem remains on dhcp.
On every system I have tried it on firefox, chrome and opera.
So, you can ask what is strange in this issue? Strange thing is that I have tried install Ubuntu, Fedora, Opensuse on those three machines and they don't have this error. Pages download normally, Kadu don't drops messages. Please don't tell me to use one of those distro I want to stay with Arch.
Please help me to solve this. Maybe I'm doing something wrong with configuring network.
Best regards.
P.S sorry for my english, it is not my native language.
Last edited by szamot83 (2010-09-01 17:34:27)

I think it's not the same, try doing 'lsmod | grep -i ipv6' and see if the module is still loaded, you can also check the output of ifconfig for inet6 addr to check if it is trying to use ipv6.
If the problem is not caused by trying to use ipv6 with a router that doesn't like that then I have no other ideas.

Windows Vista and WiFi networking problem with MackBook Air

Hi, everyone!
Thanks in advance for the following help.
For some specific programms I need Windows Vista to be set up on my MacBook Air.
The problem with Broadcom WiFi adapter.
While moving large files over home network it hangs and looses the wifi network. It works OK while surfing the internet or doing other low traffic job. But when it comes to 2 MB/sec transfer it doesn't work. I tried two different routers, no positive result. PC works propely on any file sizes. After booting the Leopard the problem goes away. So it is onle Windows Vista problem.
May be drivers? I tried 4.170.25.19 Windows Vista drivers from Broadcom - it didn't help. But I am not goog in driver settings in Control Panel, so may be the solution is there.
Any ideas how to solve it?
Thanks for help in advance.
Andrey.

Hello Nescom. Welcome to the Apple Discussions!
I'm afraid I really don't have an answer for you but I can offer my experiences with large files transfer with Vista. My current home network is a combination of Windows PC, Windows Servers, and Macs. Large file transfers between most of them have relatively the same performance, except when transferring large files from the Vista PC to any other OS. It is demonstrably slower. Interestingly, transfers between Vista machines does not appear to be a problem. I understand that this is a known problem by Microsoft and was supposed to be fixed with Vista SP1.
So the problem might not be your network, but Vista itself. I'm curious if you have this problem when transferring large files to another Vista device?

Time Machine and Time Capsule - Failing with Network Problem

My problems with TM/TC have been ongoing for a couple of months now and I am going round in circles - need help.
This is the second post I have made, the first got lost in people suggesting the obvious - so I will try to be a little more specific if I can.
I will detail the current state first - i.e. where I am now - after I will list what I have done so far to get to this point.
Currently, my iMac (intel) is directly connected by Ethernet 1GB to the Time Capsule. The TC is then connected to a Netgear router which in turn is connected to Internet.
I have no network problems at all - internet connection is fine. the Netgear Router has the latest firmware version and is working fine. The porblems i have are nothing to do with this.
The time Capsule is in Bridge mode and getting a reserved dhcp IP address from the Netgear router.
The Time Capsule has been fully reset - i.e. power cable out, hold the reset button, plug in power cable (spark, spark), hold reset button, fast blink for 20 seconds or so, light goes out, release button.
I have re-applied the latest Time Capsule firmware.
I have renamed the disk on the Time Capsule.
I have renamed my iMac and deleted all the time capsule entries from Keychain.
I have re-installed Mac OSX and re-updated to the latest 10.5.6 release.
At the moment I have kicked off a backup with a lot of large files - like music folder, video folder etc excluded. I also have parallels and have excluded the disk image. I have 1 other 50GB disk image which is also excluded.
I am expecting the first initial backup will complete successfully.
I will then remove music and video from exclusions and allow them to backup. I am expecting this will complete no problem. (I do this because the upcoming problem will happen if I move away from the machine - and I dont want to sit there for 2 days).
So up to this point TM and TC have performed flawlessly. The issue that follows started happening before the 10.5.6 update after backing up with no issues for months. At this point I will be able to use TM to browse the backup and restore files. I will be able to mount the sparse bundle and browse files. Spotlight reports no issues and indexes quickly.
If I leave my machine after a successful backup and the hourly update kicks in it will fail with 'A Network problem' basically saying the backup has filed because of a network problem, but is not any more specific, logs show far too much to put the whole thing here, but the following is an excerpt
Dec 23 05:19:49 MickMac /System/Library/CoreServices/backupd[1499]: Backup destination mounted at path: /Volumes/Backup
Dec 23 05:19:50 MickMac hdiejectd[1519]: running
Dec 23 05:19:51 MickMac kernel[0]: jnl: disk1s2: replay_journal: from: 28864512 to: 30084096 (joffset 0x1d0f000)
Dec 23 05:21:49 MickMac kernel[0]: jnl: disk1s2: journal replay done.
Dec 23 05:21:49 MickMac /System/Library/CoreServices/backupd[1499]: Disk image /Volumes/Backup/MickMac_001ec215ce76.sparsebundle mounted at: /Volumes/Backup of MickMac
Dec 23 05:21:49 MickMac /System/Library/CoreServices/backupd[1499]: Backing up to: /Volumes/Backup of MickMac/Backups.backupdb
Dec 23 05:21:49 MickMac com.apple.launchd[1] (com.apple.netauth.sysagent[1500]): Stray process with PGID equal to this dead job: PID 1503 PPID 1 check_afp
Dec 23 05:21:55 MickMac fseventsd[38]: event logs in /Volumes/Backup of MickMac/.fseventsd out of sync with volume. destroying old logs. (3627 125 5482)
Dec 23 05:27:33 MickMac /usr/sbin/ocspd[1539]: starting
Dec 23 05:30:27 MickMac kernel[0]: ASP_TCP HoldPendingReqs: holding slot 5 reqID 5400 flags 0x9 afpCmd 34 so 0x7e78cc0
Dec 23 05:30:27 MickMac kernel[0]: ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0x7e78cc0
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect started /Volumes/Backup prevTrigger 0 currTrigger 1
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: doing reconnect on /Volumes/Backup
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: soft mounted and hidden volume so do not notify KEA for /Volumes/Backup
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/Backup
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Backup
Dec 23 05:31:26 MickMac kernel[0]: ASP_TCP CancelOneRequest: cancelling slot -1 error 89 reqID 1 flags 0x9 afpCmd 0 so 0x7e78cc0
Dec 23 05:31:26 MickMac KernelEventAgent[34]: tid 00000000 received VQ_DEAD event (32)
Dec 23 05:31:26 MickMac KernelEventAgent[34]: tid 00000000 type 'afpfs', mounted on '/Volumes/Backup', from 'afp_0V1fqC1mgalO00mE1H0Pyetl-1.2d00000a', dead
Dec 23 05:31:26 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Open Session failed 57 /Volumes/Backup
Dec 23 05:31:26 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: max reconnect time reached 60 > 30 /Volumes/Backup
Dec 23 05:31:26 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: posting to KEAType IO] [ErrNo 5] [IOType Read] [PBlkNum 1248] [LBlkNum 155] [FSLogMsgID 501572642] [FSLogMsgOrder First]
Dec 23 05:31:26 MickMac kernel[0]:
Dec 23 05:31:26 MickMac fseventsd[38]: failed to unlink old log file /Volumes/Backup of MickMac/.fseventsd/0000000000ccb02b (Input/output error)
Dec 23 05:31:26 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED)."
It goes on and on and is repeated every hour. For each one I get an error message on screen saying backup failed due to a network error. However I have tried a manual download over the same period set at an extremely slow rate so that it was downloading during this time and it showed no errors. I.e. the network connection from imac, through TC to netgear and out to internet - and monitored this while time machine showed these errors (i.e. at the same time) and this showed no connection problems at all and completed succesfully.
I know TM uses an internal address to do backups, but uses the same cable and network card to get the job done. I am simply removing the cable as a source of issue although I have also replaced this making no difference.
Applecare are involved and have so far been sent 2 sets of logs and so far have not been able to find the cause. New TC is on its way to try that, although they think it is something on the imac that is causing this.
Sleep mode is turned off although screen sleep is on. The tick is not in the box for putting hard drives to sleep whenever possible.
Now, after this has happened, and back at the machine. I restart both imac and TC. Try running a backup, spotlight starts to re-index - i.e. will mount the backup volume and start the index process, gets to about 90% then fails - again excerpts from log
"Dec 23 09:18:50 MickMac /System/Library/CoreServices/backupd[161]: Backing up to: /Volumes/Backup of MickMac/Backups.backupdb
Dec 23 09:18:50 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE)(E rror) IndexCI in ContentIndexOpenBulk:Unclean shutdown of /Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE/li ve.0.; needs recovery
Dec 23 09:18:57 MickMac com.apple.launchd[67] (com.apple.netauth.useragent[147]): Stray process with PGID equal to this dead job: PID 152 PPID 1 check_afp
Dec 23 09:19:48 MickMac mds[32]: (Error) Server: machmsgdispatch: (ipc/send) invalid destination port [msgh_id 14016]
Dec 23 09:29:35 MickMac /usr/sbin/ocspd[197]: starting
Dec 23 09:42:48 MickMac kernel[0]: ASP_TCP HoldPendingReqs: holding slot 11 reqID 3204 flags 0x9 afpCmd 60 so 0x8051b28
Dec 23 09:42:48 MickMac kernel[0]: ASP_TCP HoldPendingReqs: holding slot 12 reqID 3205 flags 0x9 afpCmd 34 so 0x8051b28
Dec 23 09:42:48 MickMac kernel[0]: ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0x8051b28
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect started /Volumes/Backup prevTrigger 0 currTrigger 1
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: doing reconnect on /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: soft mounted and hidden volume so do not notify KEA for /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Logging in with uam 10 /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Restoring session /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: ASP_TCP CancelOneRequest: cancelling slot 11 error 35 reqID 3204 flags 0x19 afpCmd 60 so 0x8051b28
Dec 23 09:42:49 MickMac kernel[0]: ASP_TCP CancelOneRequest: cancelling slot 12 error 35 reqID 3205 flags 0x19 afpCmd 34 so 0x8051b28"
And later....
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x39 (UNDEFINED).
Dec 23 09:45:49 MickMac KernelEventAgent[34]: tid 00000000 received VQ_DEAD event (32)
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac kernel[0]: hfs_clonefile: cluster_read failed - 5
Dec 23 09:45:49 MickMac KernelEventAgent[34]: tid 00000000 type 'afpfs', mounted on '/Volumes/Backup', from 'afp_0V1fqC1mgalO00mE1H0Pyetl-1.2d000005', dead
Dec 23 09:45:49 MickMac kernel[0]: HFS resolvelink: can't find iNode791959
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x39 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]: ore-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431/store.db] [FSLogMsgID 1580919258] [FSLogMsgOrder Last]
Dec 23 09:45:49 MickMac KernelEventAgent[34]: tid 00000000 found 1 filesystem(s) with problem(s)
Dec 23 09:45:49 MickMac kernel[0]: jnl: disk1s2: dojnlio: strategy err 0x5
Dec 23 09:45:49 MickMac kernel[0]: jnl: disk1s2: end_transaction: only wrote 0 of 49664 bytes to the journal!
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431)(E rror) IndexSDB in dbcheckdatastore:store.db : dbgetdatastore: ERR: could not read 4096 bytes
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431)(E rror) IndexCI in CIMetaInfoSync:write err: 5
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431)(E rror) IndexCI in CIMetaInfoCreate:Tried to create index when index already existed /Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE)(E rror) IndexSDB in adddirtychunk:/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE/st ore.db : ERR: Can't write DST header (Input/output error)
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE)(E rror) IndexSDB in dbflushdatastore:/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE/st ore.db : dbsyncdatastore: write-errors flushing cache/writing map.
Am I the only one having these problems? any help from anybody please...

Got the same problem with a 3 months old TC.
The replacement TC, does it work now flawless?

Upgrading OS Mountain Lion - Network problems

Dear all,
I've upgraded my iMAC last week-end. Good job
But... big network problem with ADSL connexion via ethernet
I've installed a CPL network at home because WI-FI range is blocked by big walls. Then no problem before (Modem Belkin connected on time machine and all devices (apple tv, Imac,...) linked by CPL).
WHen I've installed Moutain Lion, no more possibilities to connect throughout Ethernet (no DHCP renew).
Then I've reloaded a WIFI connexion. No problem at this time since this morning. I need to disconnect and reconnect the connection 4/5 times and It's no stable ?
Do you have an advice ? I really would like to find the stability of a CPL-Ethernet connection.
Thanks

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

HT1349 MY I PHONE 3GS NETWORK PROBLEM NO SHOWN NETWORK AND I N'T DIELD NUMBER WT CAN I DO?

MY I PHONE 3GS NETWORK PROBLEM NO SHOWN NETWORK AND I N'T DIELD NUMBER WT CAN I DO? plz help me

Please stop SHOUTING at us! Typing in all CAPS is rude and considered shouting, frankly it makes you come across as a jerk.
What it the issue? The posting makes no sense.
If it's a network issue, have you contacted the carrier?

Frozen iMac with Network problems

I have a 21.5 inch iMac purchased around Nov'12. Three days ago, suddenly no web page could be opened. I thought it to be a problem of my router but when I found out that I was able to use the Internet perfectly from my MacBook, I restarted my iMac but the problem remained. I shut it down & then restarted it... Now it showed only a white screen with the Apple logo on it and the waiting symbol. This remained till hours until I got irritated and switched off the power supply. I switched on the next consecutive days but the problem persisted. Today fortunately my iMac started.. The home screen has come... It is able to recognise my wifi & Ethernet but does not open any web page. Going to system preferences and then to Networks is hanging the system preferences window. When I force quit it, it says to file a report to Apple.... But the problem doesn't get solved... I always believed Apple as a company whose products never hanged up or faced hardware or software issues!!!

Hello,
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions, reboot.
If you still have problems, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.

CM2012 problem or Network problem??

We are having a difficult problem and so far no one has been able to figure it out. I will do my best to explain in detail what is going on.
Our CM2012 server has this static IP address: 10.10.141.54
Our CM2012 server is a vSphere virtual server with 32GB of RAM
Our CM2012 server is also running SQL 2012
Our CM2012 server is a DP and our only MP
On the DP I configured PXE with the following options.
_ Enable PXE support for clients
_ Allow this distribution point to respond to incoming PXE requests
_ Enable unknown computer support
_ Require a password when computers use PXE
_ Allow user device affinity with automatic approval
_ Respond to PXE requests on all network interfaces
_ Specify the PXE server response delay (seconds) = o
I have 2 ports in my office that were patched to use 10.10.141.x subnet
I created a DHCP scope that answers on 10.10.141.x This scope has 10 addresses
The DHCP scope has 066 set to 10.10.141.54
The DHCP scope has 067 set to \smsboot\x64\wdsnbp.com
When I build any machine on the ports in my office the SMSImages\MH100002\boot.MH100002.wim copies down. This takes about 2-3 minutes.
PXE loads up the WinPE environment and you are prompted to enter a password for the DP as outlined above. I enter the password and the next sceen pops up in
1 second. and it only takes about 4 seconds to resolve the task sequence.
The rest of our building (all workstations) are the 10.10.156.x subnet
They all use a different DHCP scope but the 10.10.156 DHCP scope also has 066 set to 10.10.141.54 and 067 is set to \smsboot\x64\wdsnbp.com
When I build any machine on the 10.10.156.x subnet the SMSImages\MH100002\boot.MH100002.wim copies down. This takes about 2-3 minutes. But....and here is our
PROBLEM.....Not all the time but at least %50-%75 of the time once you
enter the password for the DP it takes 3-5 MINUTES to get to the next window (which is the Select Task Sequence). I choose the task sequence and it takes
1 hour to Resolve!!
Why? I have spent hours working with our Network techs and they said there are no dropped packets and the network is working as expected. All other job fuctions by all other departments work and are not complaining. It is only doing OSD's
do we see this issue.
So............. I reproduced the problem and captured the Entire SMSTS.LOG file. This smsts.log file is from the start up to Entering the Password for the DP, which took about 2 minutes.
Is our CM2012 server jacked up or is this a network problem? What makes all of us think it is CM2012 is the fact that the WinPE image copies down at the same speed on both subnets 10.10.141.x and 10.10.156.x
Any help/advice would be great.
TsPxe.dll loaded TSPxe
6/5/2014 10:39:33 AM 1164 (0x048C)
Device has PXE booted TSPxe
6/5/2014 10:39:33 AM 1164 (0x048C)
Variable Path: \SMSTemp\2014.06.05.10.35.37.0001.{EDD00807-3AE3-48F3-9707-275FFD9FBB91}.boot.var
TSPxe 6/5/2014 10:39:33 AM
1164 (0x048C)
Succesfully added firewall rule for Tftp TSPxe
6/5/2014 10:39:33 AM 1164 (0x048C)
Executing: X:\sms\bin\i386\smstftp.exe -i 10.10.141.54 get \SMSTemp\2014.06.05.10.35.37.0001.{EDD00807-3AE3-48F3-9707-275FFD9FBB91}.boot.var X:\sms\data\variables.dat
TSPxe 6/5/2014 10:39:33 AM
1164 (0x048C)
Command line for extension .exe is "%1" %*
TSPxe 6/5/2014 10:39:33 AM
1164 (0x048C)
Set command line: "X:\sms\bin\i386\smstftp.exe" -i 10.10.141.54 get \SMSTemp\2014.06.05.10.35.37.0001.{EDD00807-3AE3-48F3-9707-275FFD9FBB91}.boot.var X:\sms\data\variables.dat
TSPxe 6/5/2014 10:39:33 AM
1164 (0x048C)
Executing command line: "X:\sms\bin\i386\smstftp.exe" -i 10.10.141.54 get \SMSTemp\2014.06.05.10.35.37.0001.{EDD00807-3AE3-48F3-9707-275FFD9FBB91}.boot.var X:\sms\data\variables.dat
TSPxe 6/5/2014 10:39:33 AM
1164 (0x048C)
Process completed with exit code 0 TSPxe
6/5/2014 10:39:33 AM 1164 (0x048C)
Succesfully removed firewall rule for Tftp TSPxe
6/5/2014 10:39:33 AM 1164 (0x048C)
Successfully downloaded pxe variable file. TSPxe
6/5/2014 10:39:33 AM 1164 (0x048C)
we are booted using PXE TSPxe
6/5/2014 10:39:33 AM 1164 (0x048C)
we are booted using PXE and we don't use a password or the password is provided by the user
TSPxe 6/5/2014 10:39:33 AM
1164 (0x048C)
Found network adapter "Intel(R) 82567LM-3 Gigabit Network Connection" with IP Address 10.10.156.110.
TSPxe 6/5/2014 10:39:33 AM
1164 (0x048C)
Run PXE Interactive TSPxe
6/5/2014 10:39:33 AM 1164 (0x048C)
Running Wizard in Interactive mode TSPxe
6/5/2014 10:39:33 AM 1164 (0x048C)
Loading Media Variables from "X:\sms\data\variables.dat"
TSPxe 6/5/2014 10:39:33 AM
1164 (0x048C)
CryptDecrypt (hKey, 0, 1, 0, pData, &dwDecryptedLen), HRESULT=80090005 (e:\nts_sccm_release\sms\framework\smscrypt\windes.cpp,165)
TSPxe 6/5/2014 10:39:33 AM
1164 (0x048C)
SMS::Crypto::DES::DecryptBuffer( (BYTE*)pszPassword, (DWORD)(wcslen(pszPassword)*sizeof(WCHAR)), encryptedBuffer.getBuffer(), (DWORD)encryptedBuffer.size(), pbDecryptedBuffer, dwDecryptedBufferSize ), HRESULT=80090005 (e:
\nts_sccm_release\sms\framework\tscore\tsremovablemedia.cpp,387)
TSPxe 6/5/2014 10:39:33 AM
1164 (0x048C)
Activating Welcome Page. TSPxe
6/5/2014 10:39:33 AM 1164 (0x048C)
Loading bitmap TSPxe
6/5/2014 10:39:33 AM 1164 (0x048C)
WelcomePage::OnWizardNext() TSPxe
6/5/2014 10:39:37 AM 1164 (0x048C)
Loading Media Variables from "X:\sms\data\variables.dat"
TSPxe 6/5/2014 10:39:37 AM
1164 (0x048C)
CryptDecrypt (hKey, 0, 1, 0, pData, &dwDecryptedLen), HRESULT=80090005 (e:\nts_sccm_release\sms\framework\smscrypt\windes.cpp,165)
TSPxe 6/5/2014 10:39:37 AM
1164 (0x048C)
SMS::Crypto::DES::DecryptBuffer( (BYTE*)pszPassword, (DWORD)(wcslen(pszPassword)*sizeof(WCHAR)), encryptedBuffer.getBuffer(), (DWORD)encryptedBuffer.size(), pbDecryptedBuffer, dwDecryptedBufferSize ), HRESULT=80090005 (e:
\nts_sccm_release\sms\framework\tscore\tsremovablemedia.cpp,387)
TSPxe 6/5/2014 10:39:37 AM
1164 (0x048C)
Loading Media Variables from "X:\sms\data\variables.dat"
TSPxe 6/5/2014 10:39:37 AM
1164 (0x048C)
CryptDecrypt (hKey, 0, 1, 0, pData, &dwDecryptedLen), HRESULT=80090005 (e:\nts_sccm_release\sms\framework\smscrypt\windes.cpp,165)
TSPxe 6/5/2014 10:39:37 AM
1164 (0x048C)
SMS::Crypto::DES::DecryptBuffer( (BYTE*)pszPassword, (DWORD)(wcslen(pszPassword)*sizeof(WCHAR)), encryptedBuffer.getBuffer(), (DWORD)encryptedBuffer.size(), pbDecryptedBuffer, dwDecryptedBufferSize ), HRESULT=80090005 (e:
\nts_sccm_release\sms\framework\tscore\tsremovablemedia.cpp,387)
TSPxe 6/5/2014 10:39:37 AM
1164 (0x048C)
Verifying media password. TSPxe
6/5/2014 10:39:37 AM 1164 (0x048C)
Loading Media Variables from "X:\sms\data\variables.dat"
TSPxe 6/5/2014 10:39:37 AM
1164 (0x048C)
Spawned thread 1196 to download policy. TSPxe
6/5/2014 10:39:37 AM 1164 (0x048C)
Entering TSMediaWizardControl::GetPolicy. TSPxe
6/5/2014 10:39:37 AM 1196 (0x04AC)
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00'
TSPxe
6/5/2014 10:39:37 AM 1196 (0x04AC)
Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}
TSPxe 6/5/2014 10:39:37 AM
1196 (0x04AC)
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00420041003300410033003900300030002D0043004100360044002D0034006100630031002D0038004300320038002D003500300037003300410046004300320032004200300033007D00'
TSPxe
6/5/2014 10:39:37 AM 1196 (0x04AC)
Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}
TSPxe 6/5/2014 10:39:37 AM
1196 (0x04AC)
Setting LogMaxSize to 1000000 TSPxe
6/5/2014 10:39:37 AM 1196 (0x04AC)
Setting LogMaxHistory to 1 TSPxe
6/5/2014 10:39:37 AM 1196 (0x04AC)
Setting LogLevel to 0 TSPxe
6/5/2014 10:39:37 AM 1196 (0x04AC)
Setting LogEnabled to 1 TSPxe
6/5/2014 10:39:37 AM 1196 (0x04AC)
Setting LogDebug to 1 TSPxe
6/5/2014 10:39:37 AM 1196 (0x04AC)
UEFI: false TSPxe
6/5/2014 10:39:37 AM 1196 (0x04AC)
Loading variables from the Task Sequencing Removable Media.
TSPxe 6/5/2014 10:39:37 AM
1196 (0x04AC)
Loading Media Variables from "X:\sms\data\variables.dat"
TSPxe 6/5/2014 10:39:37 AM
1196 (0x04AC)
Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL'
TSPxe 6/5/2014 10:39:37 AM
1196 (0x04AC)
Setting SMSTSMP TS environment variable TSPxe
6/5/2014 10:39:37 AM 1196 (0x04AC)
Setting _SMSMediaGuid TS environment variable
TSPxe 6/5/2014 10:39:37 AM
1196 (0x04AC)
Setting _SMSTSBootMediaPackageID TS environment variable
TSPxe 6/5/2014 10:39:37 AM
1196 (0x04AC)
Setting _SMSTSHTTPPort TS environment variable
TSPxe 6/5/2014 10:39:37 AM
1196 (0x04AC)
Setting _SMSTSHTTPSPort TS environment variable
TSPxe 6/5/2014 10:39:37 AM
1196 (0x04AC)
Setting _SMSTSIISSSLState TS environment variable
TSPxe 6/5/2014 10:39:37 AM
1196 (0x04AC)
Setting _SMSTSLaunchMode TS environment variable
TSPxe 6/5/2014 10:39:37 AM
1196 (0x04AC)
Setting _SMSTSMediaPFX TS environment variable
TSPxe 6/5/2014 10:39:37 AM
1196 (0x04AC)
Setting _SMSTSPublicRootKey TS environment variable
TSPxe 6/5/2014 10:39:37 AM
1196 (0x04AC)
Setting _SMSTSSiteCode TS environment variable
TSPxe 6/5/2014 10:39:37 AM
1196 (0x04AC)
Setting _SMSTSSiteSigningCertificate TS environment variable
TSPxe 6/5/2014 10:39:37 AM
1196 (0x04AC)
Setting _SMSTSUseFirstCert TS environment variable
TSPxe 6/5/2014 10:39:37 AM
1196 (0x04AC)
Setting _SMSTSx64UnknownMachineGUID TS environment variable
TSPxe 6/5/2014 10:39:37 AM
1196 (0x04AC)
Setting _SMSTSx86UnknownMachineGUID TS environment variable
TSPxe 6/5/2014 10:39:37 AM
1196 (0x04AC)
Root CA Public Certs= TSPxe
6/5/2014 10:39:37 AM 1196 (0x04AC)
Missing root CA environment variable from variables file
TSPxe 6/5/2014 10:39:37 AM
1196 (0x04AC)
Support Unknown Machines: 0 TSPxe
6/5/2014 10:39:37 AM 1196 (0x04AC)
Custom hook from X:\\TSConfig.INI is TSPxe
6/5/2014 10:39:37 AM 1196 (0x04AC)
No hook is found to be executed before downloading policy
TSPxe 6/5/2014 10:39:37 AM
1196 (0x04AC)
Authenticator from the environment is empty.
TSPxe 6/5/2014 10:39:37 AM
1196 (0x04AC)
Need to create Authenticator Info using PFX
TSPxe 6/5/2014 10:39:37 AM
1196 (0x04AC)
Initialized CStringStream object with string: 401862f6-9071-4409-8912-3282717e936d;2014-06-05T18:39:37Z.
TSPxe 6/5/2014 10:39:37 AM
1196 (0x04AC)
Set media certificate in transport TSPxe
6/5/2014 10:39:37 AM 1196 (0x04AC)
Set authenticator in transport TSPxe
6/5/2014 10:39:37 AM 1196 (0x04AC)
CLibSMSMessageWinHttpTransport::Send: URL: MGH-SCCM12-01.Acme.org:80 GET /SMS_MP/.sms_aut?MPKEYINFORMATIONMEDIA
TSPxe 6/5/2014 10:39:37 AM
1196 (0x04AC)
Executing command line: X:\WINDOWS\system32\cmd.exe /k
TSBootShell 6/5/2014 10:39:49 AM
748 (0x02EC)
The command completed successfully. TSBootShell
6/5/2014 10:39:49 AM 748 (0x02EC)
Successfully launched command shell. TSBootShell
6/5/2014 10:39:49 AM 748 (0x02EC)
Request was successful. TSPxe
6/5/2014 10:39:59 AM 1196 (0x04AC)
Default CSP is Microsoft Enhanced RSA and AES Cryptographic Provider
TSPxe 6/5/2014 10:39:59 AM
1196 (0x04AC)
Default CSP Type is 24 TSPxe
6/5/2014 10:39:59 AM 1196 (0x04AC)
New settings: TSPxe
6/5/2014 10:39:59 AM 1196 (0x04AC)
site=MH1,MH1, MP=http://MGH-SCCM12-01.Acme.org, ports: http=80,https=443
TSPxe 6/5/2014 10:39:59 AM
1196 (0x04AC)
certificates are received from MP.
TSPxe 6/5/2014 10:39:59 AM
1196 (0x04AC)
Unknown machine GUIDs: 39ed9a51-efec-4cc7-9b43-141201797ed8 dd5707b8-7ea7-4483-a2a7-eb5102254461
TSPxe 6/5/2014 10:39:59 AM
1196 (0x04AC)
Getting MP time information TSPxe
6/5/2014 10:39:59 AM 1196 (0x04AC)
Set authenticator in transport TSPxe
6/5/2014 10:39:59 AM 1196 (0x04AC)
Requesting client identity TSPxe
6/5/2014 10:39:59 AM 1196 (0x04AC)
Setting message signatures. TSPxe
6/5/2014 10:39:59 AM 1196 (0x04AC)
Setting the authenticator. TSPxe
6/5/2014 10:39:59 AM 1196 (0x04AC)
CLibSMSMessageWinHttpTransport::Send: URL: MGH-SCCM12-01.Acme.org:80 CCM_POST /ccm_system/request
TSPxe 6/5/2014 10:39:59 AM
1196 (0x04AC)
Request was successful. TSPxe
6/5/2014 10:40:20 AM 1196 (0x04AC)
::DecompressBuffer(65536) TSPxe
6/5/2014 10:40:20 AM 1196 (0x04AC)
Decompression (zlib) succeeded: original size 413, uncompressed size 2456.
TSPxe 6/5/2014 10:40:20 AM
1196 (0x04AC)
-60 -60 TSPxe
6/5/2014 10:40:20 AM 1196 (0x04AC)
Server time zone info: 480, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
TSPxe 6/5/2014 10:40:20 AM
1196 (0x04AC)
Client Identity: TSPxe
6/5/2014 10:40:20 AM 1196 (0x04AC)
Netbios name: TSPxe
6/5/2014 10:40:20 AM 1196 (0x04AC)
Current time: 2014-06-05 18:40:20.213 TZ:Pacific Standard Time Bias:0480
TSPxe 6/5/2014 10:40:20 AM
1196 (0x04AC)
Current time zone info: 480, Pacific Standard Time, [0 0 0 0 0 0 0 0], 0, , [0 0 0 0 0 0 0 0], 0
TSPxe 6/5/2014 10:40:20 AM
1196 (0x04AC)
Adjusting the system time: -3669.571 seconds
TSPxe 6/5/2014 10:40:20 AM
1196 (0x04AC)
Time zone info set to: 480, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
TSPxe 6/5/2014 11:40:20 AM
1196 (0x04AC)
New time: 2014-06-05 17:39:10.641 TSPxe
6/5/2014 10:39:10 AM 1196 (0x04AC)
Current time: 2014-06-05 17:39:10.638 TZ: Bias:0480
TSPxe 6/5/2014 10:39:10 AM
1196 (0x04AC)
Downloading policy from http://MGH-SCCM12-01.Acme.org.
TSPxe 6/5/2014 10:39:10 AM
1196 (0x04AC)
Initializing HTTP transport. TSPxe
6/5/2014 10:39:10 AM 1196 (0x04AC)
Setting URL = http://MGH-SCCM12-01.Acme.org.
TSPxe 6/5/2014 10:39:10 AM
1196 (0x04AC)
Setting Ports = 80,443. TSPxe
6/5/2014 10:39:10 AM 1196 (0x04AC)
Setting CRL = false. TSPxe
6/5/2014 10:39:10 AM 1196 (0x04AC)
Setting Server Certificates. TSPxe
6/5/2014 10:39:10 AM 1196 (0x04AC)
Set authenticator in transport TSPxe
6/5/2014 10:39:10 AM 1196 (0x04AC)
Setting Media Certificate. TSPxe
6/5/2014 10:39:10 AM 1196 (0x04AC)
Preparing Client Identity Request. TSPxe
6/5/2014 10:39:10 AM 1196 (0x04AC)
Setting transport. TSPxe
6/5/2014 10:39:10 AM 1196 (0x04AC)
Setting SourceID = 401862f6-9071-4409-8912-3282717e936d.
TSPxe 6/5/2014 10:39:10 AM
1196 (0x04AC)
Setting site code = MH1. TSPxe
6/5/2014 10:39:10 AM 1196 (0x04AC)
Can not find DeploymentType in file TsmBootstrap.ini or the file doesn't exist. This is not running on Windows To Go.
TSPxe 6/5/2014 10:39:10 AM
1196 (0x04AC)
Setting SMBIOS GUID = 4C4C4544-004D-3210-8036-B3C04F584C31.
TSPxe 6/5/2014 10:39:10 AM
1196 (0x04AC)
Adding MAC Address 00:25:64:F6:F3:DE.
TSPxe 6/5/2014 10:39:10 AM
1196 (0x04AC)
Executing Client Identity Request. TSPxe
6/5/2014 10:39:10 AM 1196 (0x04AC)
Requesting client identity TSPxe
6/5/2014 10:39:10 AM 1196 (0x04AC)
Setting message signatures. TSPxe
6/5/2014 10:39:10 AM 1196 (0x04AC)
Setting the authenticator. TSPxe
6/5/2014 10:39:10 AM 1196 (0x04AC)
CLibSMSMessageWinHttpTransport::Send: URL: MGH-SCCM12-01.Acme.org:80 CCM_POST /ccm_system/request
TSPxe 6/5/2014 10:39:10 AM
1196 (0x04AC)
Request was successful. TSPxe
6/5/2014 10:39:32 AM 1196 (0x04AC)
::DecompressBuffer(65536) TSPxe
6/5/2014 10:39:32 AM 1196 (0x04AC)
Decompression (zlib) succeeded: original size 416, uncompressed size 2456.
TSPxe 6/5/2014 10:39:32 AM
1196 (0x04AC)
-60 -60 TSPxe
6/5/2014 10:39:32 AM 1196 (0x04AC)
Server time zone info: 480, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
TSPxe 6/5/2014 10:39:32 AM
1196 (0x04AC)
Client Identity: TSPxe
6/5/2014 10:39:32 AM 1196 (0x04AC)
Netbios name: TSPxe
6/5/2014 10:39:32 AM 1196 (0x04AC)
Client GUID = , Netbios name = , State = Known
TSPxe 6/5/2014 10:39:32 AM
1196 (0x04AC)
Is 64-bit capable: 1 TSPxe
6/5/2014 10:39:32 AM 1196 (0x04AC)
Using unknown machine GUID: dd5707b8-7ea7-4483-a2a7-eb5102254461
TSPxe 6/5/2014 10:39:32 AM
1196 (0x04AC)
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=FALSE
TSPxe 6/5/2014 10:39:32 AM
1196 (0x04AC)
Hash computed from CSP: Microsoft Enhanced RSA and AES Cryptographic Provider, AlgID: 32772, HashSize: 20
TSPxe 6/5/2014 10:39:32 AM
1196 (0x04AC)
Computed HardwareID=2:F7B67B4FF13FC9BC66CD54B97BAA53ED4A24BD7B
Win32_SystemEnclosure.SerialNumber=3M26XL1
Win32_SystemEnclosure.SMBIOSAssetTag=
Win32_BaseBoard.SerialNumber=..CN736049CT04QQ.
Win32_BIOS.SerialNumber=3M26XL1
Win32_NetworkAdapterConfiguration.MACAddress=00:25:64:F6:F3:DE
TSPxe 6/5/2014 10:39:32 AM
1196 (0x04AC)
Hardware ID: 2:F7B67B4FF13FC9BC66CD54B97BAA53ED4A24BD7B
TSPxe 6/5/2014 10:39:32 AM
1196 (0x04AC)
Preparing the Client DDR Message TSPxe
6/5/2014 10:39:32 AM 1196 (0x04AC)
Setting SourceID = 401862f6-9071-4409-8912-3282717e936d.
TSPxe 6/5/2014 10:39:32 AM
1196 (0x04AC)
Sending the Client DDR message. TSPxe
6/5/2014 10:39:32 AM 1196 (0x04AC)
Sending Report TSPxe
6/5/2014 10:39:32 AM 1196 (0x04AC)
<Report><ReportHeader><Identification><Machine><ClientInstalled>0</ClientInstalled><ClientType>1</ClientType><Unknown>1</Unknown><ClientID>GUID:de44f198-735d-4ec4-998e-
55c01f55fecc</ClientID><ClientVersion>5.00.0000.0000</ClientVersion><NetBIOSName>Unknown</NetBIOSName><CodePage>437</CodePage><SystemDefaultLCID>1033</SystemDefaultLCID></Machine></Identification><ReportDetails><ReportContent>Inventory
Data</ReportContent><ReportType>Full</ReportType><Date>20140605173932.000000+000</Date><Version>1.0</Version><Format>1.1</Format></ReportDetails><InventoryAction ActionType="Predefined"><InventoryActionID>{00000000-0000-0000-0000-
000000000003}</InventoryActionID><Description>Discovery</Description><InventoryActionLastUpdateTime>20140605173932.000000+000</InventoryActionLastUpdateTime></InventoryAction>
</ReportHeader>
<ReportBody><Instance ParentClass="CCM_ClientIdentificationInformation" Class="CCM_ClientIdentificationInformation" Namespace="root\ccm"
Content="New"><CCM_ClientIdentificationInformation><HardwareID1>2:F7B67B4FF13FC9BC66CD54B97BAA53ED4A24BD7B</HardwareID1></CCM_ClientIdentificationInformation></Instance><Instance ParentClass="Win32_NetworkAdapterConfiguration"
Class="Win32_NetworkAdapterConfiguration" Namespace="root\cimv2" Content="New"><Win32_NetworkAdapterConfiguration><MACAddress>00:25:64:F6:F3:DE</MACAddress></Win32_NetworkAdapterConfiguration></Instance><Instance
ParentClass="Win32_ComputerSystemProduct" Class="Win32_ComputerSystemProduct" Namespace="root\cimv2" Content="New"><Win32_ComputerSystemProduct><UUID>4C4C4544-004D-3210-8036-
B3C04F584C31</UUID></Win32_ComputerSystemProduct></Instance></ReportBody>
</Report>
TSPxe 6/5/2014 10:39:32 AM
1196 (0x04AC)
Setting message signatures. TSPxe
6/5/2014 10:39:32 AM 1196 (0x04AC)
Setting the authenticator. TSPxe
6/5/2014 10:39:32 AM 1196 (0x04AC)
CLibSMSMessageWinHttpTransport::Send: URL: MGH-SCCM12-01.Acme.org:80 CCM_POST /ccm_system/request
TSPxe 6/5/2014 10:39:32 AM
1196 (0x04AC)
Request was successful. TSPxe
6/5/2014 10:39:53 AM 1196 (0x04AC)
Submitted new client identity: GUID:de44f198-735d-4ec4-998e-55c01f55fecc
TSPxe 6/5/2014 10:39:53 AM
1196 (0x04AC)
Preparing Policy Assignment Request. TSPxe
6/5/2014 10:39:53 AM 1196 (0x04AC)
Setting transport. TSPxe
6/5/2014 10:39:53 AM 1
mqh7

CLibSMSMessageWinHttpTransport::Send: URL: MGH-SCCM12-01.Acme.org:80 CCM_POST /ccm_system/request
TSPxe 6/5/2014 10:39:32 AM
1196 (0x04AC)
Request was successful. TSPxe
6/5/2014 10:39:53 AM 1196 (0x04AC)
Submitted new client identity: GUID:de44f198-735d-4ec4-998e-55c01f55fecc
TSPxe 6/5/2014 10:39:53 AM
1196 (0x04AC)
Preparing Policy Assignment Request. TSPxe
6/5/2014 10:39:53 AM 1196 (0x04AC)
Setting transport. TSPxe
6/5/2014 10:39:53 AM
I can see the Client DDR is generated successfully. I hope, After 10:39:53 AM there is no activity in the SMSTS.log file until 11:39:xx AM. Is it so? Can you check whether there is no problem with guid generated (GUID:de44f198-735d-4ec4-998e-55c01f55fecc)
? it's worth to take look at the log files at server side along with IIS logs to get some more clues. Have you already taken some network trace ..this would also can provide some clues.
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

Connecting MB Pro w/OS 10.8.4 to other network computers hangs

I have updated my 2011 MB Pro to OS 10.8.4. I have an Airport Extreme network with 3 other desktop Macs connected - a Mac Pro, a G5, and an older iMac all runing a combination of Snow Leopard or Mountain Lion, but not the latest OS 10.8.4 update.
I can connect and share files from those older OS Mac desktops with each other and to the MB Pro. Trying to connect from the MB Pro to either desktop Mac hangs. In a nutshell - to the MB Pro is fine, from the MD Pro hangs. An icon for the selescted volume does appear on the MB Pro's desktop when try to access one of the desktops but the connection window stays open and I get the dreaded beach ball. Only answer is to shutdown the MB Pro, restart, and do the file sharing from the desktops to the MB Pro. That direction works okay.
I suspect there is something in the latest OS update that is causing the networking problem. Is there a fix? I could update the desltop Macs to OS 10.8.4 but am afraid I'll have no netwroking capability at that point. So, just checking to see if there is a known networking issue with OS 10.8.4, or perhaps a workaround.
Thanks Much!

Are you doing this via screen sharing?
On the MacBook Pro
Try a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application uninstaller. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
General information.
Isolating issues in Mac OS X
Troubleshooting Permission Issues
Step by Step to Fix Your Mac

10.4.7 networking problem - corrupt files when we save on the Xserve

I have upgrade 15 macs on my network from 10.3.9/10.4.4 to 10.4.7 - the Xserve was upgraded in 10.4.7 before. Now I have a lot of networks problems. When we save big files (quark Xpress 7, adobe illustrator CS, adobe photoshop), sometimes we lost our job, and we can't open the files (incorrect file format, postcript error in the illustrator file, lines in picture files...)
Sometimes, we can't import PDF in quark files, but, if we copy pdf files from the server to the desktop, xpress accept to import the pdf.
We also noted problems of refresh of the windows in the finder.
The Quark technical support is certain that the problem comes from the update 10.4.7 on the desktop computers, and suggest to wait until the 10.4.8 or to downgrad to 10.4.6.
Have you some infos about theses problems?
Thanks for you infos

Chatted with Apple re above. The guy was very patient and as helpful as he could be. Here's what he suggested:
At Terminal type:
sudo mdutil -s (drag the volume to here which enters the path)
You will be asked for your administrator password; enter this and press enter.
This commands returns the status of Indexing - namely my machine returned the following message-
Status: Indexing Disabled
Next I typed in:
sudo mdutil -i on (drag the volume to here which enters the path)
Press Enter
The following message is displayed:
Indexing enabled for volume.
Since then the machine has been very active (fans and disk lights) which I hope is it indexing the volume.
Spotlight works when the specific folder is selected but not across the whole volume. Sherlock still does not find any files. I remain positive, knowing that indexing takes plenty of time.
Thanks Apple Support for help

10.5.7 and network problems

Hi everyone,
I recently installed 10.5.7 on my iMac and Macbook (late 2008). Whenever I use the internet, it hangs up and I get either a gray screen or the page will not load at all. I did not have this problem when I had 10.5.6 installed, it worked perfectly. I checked my modem settings and the firmware on my router and all are up to date. I know it is not the connection, because I have a Windows computer that connects to the internet with no problems, which leaves me to believe 10.5.7 is the culprit. Can anyone give me some advice or explain to me how to resolve this problem? I am finding myself having to use my Dell Notebook which I don't want to. Thanks for your time, Craig

I'm also having this networking problem, both on a wired and wireless connection. I am almost positive that this stems from the 10.5.7 update and it's incredibly frustrating. I've tried deleting the plist files from the library, adding a new location, assigning a manual IP address and resetting my network hardware, nothing has helped.
Hopefully Apple will realize this soon, in the meantime I'm going to downgrade to 10.5.6.... what a pain..
I just hope those PC people don't find out about this!

Bluetooth & network problem

I have bluetooth problem in my nokia 6233. I can't search any device & also no other mobile search my device.. I have turned on visible on.. & my mobile have network problem also.. What can i do now...? Email me plz with solution.

Sounds to me like there is a hardware problem. Unfortunately we are not able to help with hardware problems and can only suggest you have get it checked out at your local Nokia Care Point.

Can't install HP Color LaserJet 2600n to my new macbook pro with Yosemite ? Message error : "Can't download the software because of a network problem."

Hello,
I'm trying to install my HP Color LaserJet 2600n (USB) to my new macbook pro with Yosemite ? It detects the printer but when I try to install it, I get the message error : "Can't download the software because of a network problem."
I tried to install the software via the HP website. It's not working.
Can someone help me with this one ?
Thanks,

HP Print Drivers

Odd Network Problem

Hi,
I have a strange network problem, can anybody help?
Basic configuration
I have three networks 10.190.0.0, 10.192.0.0 and 10.193.0.0 joined by a single server running Solaris 11 B64a with a dual port intel card and onboard intel card (e1000g0/g1/g2) each port is plugged into the gigabit port of a seperate Dell powerconnect switch.
they have ip addresses of 10.190.0.2, 10.192.0.1 and 10.193.0.1
The problem. I have connected from a remote machine through a solaris router machine on the 10.190.0.0 network to a computer on the 10.192.0.0 network (Beyond a switch).
The terminal works fine!
if I ping the 10.190.0.1 which is the other router beyond the box with the three network interfaces packets are not seen by the pinging box. However, if I snoop the interface on the three interface router I see both the ICMP echo requests and replies.
After a considerable length of time 10-30 seconds, a load of the packets suddenly appear on the pinging machine and then continue normally.
I would like to understand:
a) where were the packets during the time between the snoop seeing them leave and them arriving at the destination?
b) why does the terminal not suffer any delays?
We are suffering with a lot of strange network issues at this new site and I am trying to figure out if its the new dell switches, the solaris network stack or something else entirely!
Anybody got any idea whats going on?
Please Help I am baffled.

It may just be the pinging machine has received the packets, but it will not display them on screen until it has found a name for the remote IP address (or until it times out waiting for one).
Do you get the same behavior with 'ping -n' ?
Darren

Mobile network problem in my lumia 520

Once network gone, I have to Restart it then again mobile network come.calling proble occurs many times even network is dispayed. Network problem sshould be rectify.

Hi mbkrish,
Do you experience the network issue regardless of your area? Aside from calling, are the other network services working fine like SMS messaging and mobile data connection? Is this for a Lumia 520 as well? If so, I hope you're using a standard microSIM and not a cut one as this is what the phone is designed to use.
BTW, the reset that the Nokia Care Center recommended is the one under Settings > about, is that right? After the reset, have you checked if the system apps are updated? Go to Settings > swipe to applications > store > check for updates.
Let us know how it will go.

Plz: Replication 9i Job Network Problem Hang

Similar Messages

Maybe you are looking for