Plz reply with code

Thanks Sujatha,
But it's not working. Can u plz reply with the code.
Plz help me soon.
Moderator message : Vague subject/description. Thread locked.
Edited by: Vinod Kumar on Jun 16, 2011 1:21 PM

Either redeem an iTunes gift card; use a credit card; or follow the directions here to create a new Apple ID without a credit card:
http://support.apple.com/kb/ht2534

Similar Messages

How do I create an object with code?

I have a flash cs3 file in which I have created a simple movieclip (square) by drawing a rectangle on the stage of that movieclip. When I drag that into another movieclip (clip) I am able to set properties for it such as x and y position by adding actionscript code to various frames of the "clip" timeline. So far so good.
Now I have created a second movieclip (shape). I want to be able to define the shape purely with code, so I entered the following code into the first frame of the "shape" timeline:
var myShape:Shape = new Shape();
myShape.graphics.beginFill(0xFF0000);
myShape.graphics.moveTo(20,20);
myShape.graphics.lineTo(100,20);
myShape.graphics.lineTo(100,100);
myShape.graphics.lineTo(20,20);
myShape.graphics.endFill();
this.addChild(myShape);
I then hoped I could drag and instance of the "shape" movieclip onto the "clip" stage and have a red triangle show up, but nothing shows up. It seems I have to actually draw something onto the "shape" stage for something to show up. I would like to be able to create shapes programmatically but I don;t know how to do it.
Thanks.

Thanks for your reply. I tried doing what you said, creating a command by opening a new flash file, etc. For some reason, I could make a rectangle and save that as a command, but making a shape using the polystar command didn't work - there was a red "x" next to it in the history panel.
Anyway, even if I could do that, it's not what I want to do. I want to be able to create a shape and then be able to change the shape dynamically. For instance, I want to be able to create a series of points and draw curves between them to create a closed curve shape. Then I want to be able to change the positions of the vertices so that the shape changes as the .swf is running. Thanks.

Custom Master Page with Code behind in SharePoint 2013

Hi All,
I want to create the Custom Master Page in Sharepoint 2013 with Code file in it.
Is it possible to create? if YES the how i can achieve it??
PD

To add something to Amit's reply, you can refer to the following link on how to create master page with code behind if you are new to ASP.net.
Walkthrough: Creating and Using ASP.NET Master Pages in Visual Web Developer
http://msdn.microsoft.com/en-us/library/ehszf8ax(v=vs.90).aspx
Miles LI TechNet Community Support

Reports of WBS Elements plz reply

Hi
we have one SAP standard reports for WBS elements ( plan/actual/variance) and one whichis customized project management report in Projects systems but both the reports are showing different balance.
is there any particular reason for showing different balance for both actual and budget colum?
plz reply asap
thanks
manish

hi
please try to use Co Object Name field with sub total

Blackberry app world team plz reply

hi blackberry app world team,
merry Christmas!
plz reply of this thread, we are suffering with that....
http://supportforums.blackberry.com/t5/BlackBerry-App-World-General/App-World-Web-Plugin-Error-An-er...
Thanks & Regards
Dinesh

Can you register from a PC?
http://us.blackberry.com/bbid.html
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

OSB: Publish activity - reply with Success

Hi,
From my proxy service I am publishing a message into a JMS queue(through a BusinessService). I have used a publish activity in the proxy service with QoS=Exactly Once. Currently i am able to send messages to the queue but, in the proxy response i am getting the whole payload which is published to the queue but i want only:
<http:http-response-code>200</http:http-response-code>, in the proxy result.
In the response pipeline i have tried the following two ways:
1. Insert <http:http-response-code>200</http:http-response-code> as first child of ./ctx:transport/ctx:response in variable Inbound.
2. Added a 'Reply' activity as 'Reply with Success'
But, they are not fetching me the expected result. Still i am getting the whole payload in the proxy result.
Kindly let me know how to achieve the same.
Thanks in advance.

but i want only: <http:http-response-code>200</http:http-response-code>, in the proxy result.Use replace action
Replace node contents [leave it empty] in variable [body] with expression [ <http:http-response-code>200</http:http-response-code>]
Hope it helps !!
Regards,
Abhinav Gupta

Reply with Success or Failure in ALSB/OSB

Hi,
What is the difference between Reply with Success and Reply with Failure.
In the error handler of a proxy service I have a "Raise Error" action and after that I have Reply Acton.
Response is the same whether I do reply with success or reply with Failure.
Please help me, when should I use Reply with Success and Reply with Failure and what is the difference between the two.

Reply with Success:
tran:response-code in the response metadata will be set to '0' specifying a successful operation.
In case of HTTP service the HTTP response code will be set to 200
Response will contain contents of $body
Any consumer of the service will see the call as being successfully completed.
In case of JMS transport the JMS Queue or Topic will get an ACK back and message will be removed from the destination.
This is usually used when you are able to properly handle an error and take any alternative actions needed to complete the request.
Reply with Failure:
tran:response-code in the response metadata will be set to '1' specifying a Failed operation.
In case of HTTP service the HTTP response code will be set to 500
Response will contain contents of $body NOT $fault. If you need to send back content of $fault you will have to replace contents of $body with those of $faults before using reply with failure.
Any consumer of the service will see the call as being failed and depending on the error handling in the consumer code error processing will be activated.
In case of JMS transport the JMS Queue or Topic will receive a NACK back but the message will NOT roll back and will be removed from the destination just like in case of Reply with Success. This happens because using a Reply action is considered as an exception being handled properly and a commit will be sent back to the JMS destination. To roll back the message ensure that you use Raise Error instead of a Reply action.
Hope this helps. Please let us know if you have any more doubts.

App-fnd-0756 error with code =MTLL

제품 : MFG_PO
작성날짜 : 2002-11-27
app-fnd-0756 error with code =MTLL
===========================================
PURPOSE
APP-FND-0756 error가 code MTLL으로 발생시
Explanation
Location id 가 missing 되거나 invalid 한경우 MTLL으로 error 발생한다
Example
Reference Documents
-------------------

Hi Hussein:
Thank you for your reply,
Was this working before? If yes, any changes have been done recently?--Yes. Nothing to do at this moment. Just After Bounce Apps service.
Can you find any errors in the database log file?-- no error in the alter_log and can login with SQLPLUS successfully.
Did AutoConfig complete successfully?-- I think at this time ,it is no need to do the autoconfig, the service running normal.
Any ideas about my case?
Thanks & Regards
Terry

Install is giving an error with code 24

Hi,
An app that I would like to use requires Adobe AIR.
I already have tried to install it from Playstore, but unfortunately without success.
I have tried this 6-7 time and also with different gmail accounts.
It downloads fine, however install is giving an error with code 24.
My device is Asus MeMo Pad fhd 10 with Android 4.3
How can I overcome this issue?
I don’t care if it is not “officially supported”, it is OK for me if it works most of the time.
Thanks in advance!
Tofig

Hi Senthil / JK,
Is your issue resolved.
I have similar issue but error text is
COM error 38 when deleting a manufacturing order
Message no. /SAPAPO/SNPOPT250
Do you have any idea about it?
Please reply
Regards
Samir

Setting a Transport Rule to reply with a Custom DSN for a Disabled User and disconnected mailbox

Here is what I am trying to accomplish. A user leaves the company. We disable there exchange email and that in turn disabled the account in AD. We want a custom NDR to say "This employee is no longer and employee blah blah" We dont get rid of email
boxes but we disable them.
Here is what I done. Created custom NDR and then created a transport rule to read if the message is sent to [email protected] reply back with this NDR code. It works fine if I disable the user from AD and not exchange. Once I "disconnect" the mailbox
it no longer works. I get the default NDR that says this email cant be found. I don't want that one. I want my custom NDR. I don't want to modify the 5.1.1 message either. Is there away around this?

Hi Nellyjo,
In your case, when you disable the user from AD and Exchange, in fact the message is blocked before reaching transport rule, recipient filtering is blocking this email. If you still want to achieve your goal by transport rule, you need to create a mailbox
or contact to make your transport rule work.
What's more, you also can modify original DSN for external and internal senders to meet your requirement.
For more information, here is a similar thread for your reference.
Setting a Transport Rule to reply with a Custom DSN for a Disabled User
http://social.technet.microsoft.com/Forums/en-US/b1a4dd86-1e0e-43a9-b340-a80352e5c323/setting-a-transport-rule-to-reply-with-a-custom-dsn-for-a-disabled-user?forum=exchange2010
Hope it helps.
If you need further assistance, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

Deploy par files with code from NWDI

Hello Experts,
I have migrated some par files to NWDI and they are deployed via SDM as SDA files.
From eclipse it is possible to deploy the par files with Code. Is this possible from NWDI that the par files are deployed with code to the portal server.
Regards
Sundeep

Hi Satish,
I am using NWDS, and then check in the Portal DC which is then deployed on the runtime system.
My question is during deployment via NWDI is it possible that the par is deployed with code.
Earlier we were using eclipse for par based development, and this was possible in eclips.
With NWDI i dont think it is possible to control if the par should be deployed on the portal server with code included.
Regards
Sundeep

SRM MDM, Error, "Table with Code 'null' does not exist in repository"

Hi experts,
We has SRM MDM scenario, while doing OCI settings, we are able to connect with MDM repository but getting follwoing error message in portal, "java.lang.IllegalArgumentException: Table with Code 'null' does not exist in the repository 'Repository' or is one of the system table (e.g. Workflows) that is not exposed in repository schema"
Can You please suggest,
Thanks and Regards,
Munish

Hi everyone,
Sudhanshu and Anshuk:- Thanks for your response, let me try and explain the real scenario in details:-
We have deployed the SRM-MDM Catalog Search UI in Portal.
We tried accessing the http://<Portal Host>:<Portal Port>/SRM-MDM/SRM_MDM
Then we got a screen (Search UI App screen), where in we have provided the MDM Server name, then the MDM Server Password, then presses the Connect button, then below this, it displayed the Repository name created in the MDM. We have selected the Repository, then provided the Credentials of a User (Name: T_CORP) in MDM which has "Catalog Manager", and the "UI Configuration Manager" Roles. Please note that these Role names were created by us in MDM. Is it the right procedure or do we have any standard Roles delivered by SAP in MDM to map? If any standard Roles are available, where we need to check these.
Once the Credentials of MDM User is provided, and then selected the "Login" button.
Then we are getting the below error.
"java.lang.IllegalArgumentException: Table with Code 'null' does not exist in the repository 'Repository' or is one of the system table (e.g. Workflows) that is not exposed in repository schema"
Please clarify; we are not configuring any values in iViews. Where we need to do this, I mean name of the iView, and what values do we need provide generally? We are just running the Search UI App application; I don't think it is an iView, because the URL shows the Application name details, etc...
Please guide us, how to fix this Error.
Thanks and Regards,
Munish

Error MSB3073: The command exited with code -1

I am getting this error while deploying the biztalk project from visual studio using Deployment Framework for Biztalk (BTDF).
Please guide me what needs to be done. Here's the code :-
<?xml version="1.0" encoding="utf-8"?>

<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003" DefaultTargets="Installer" ToolsVersion="4.0">
<PropertyGroup>
<Configuration Condition="'$(Configuration)' == ''">Debug</Configuration>
<Platform Condition="'$(Platform)' == ''">x86</Platform>
<SchemaVersion>1.0</SchemaVersion>
<ProjectName>HelloWorld</ProjectName>
<ProjectVersion>1.0</ProjectVersion>
<IncludeOrchestrations>False</IncludeOrchestrations>
<IncludeTransforms>False</IncludeTransforms>
<IncludeSSO>True</IncludeSSO>
<UsingMasterBindings>True</UsingMasterBindings>
<RequireXmlPreprocessDirectives>False</RequireXmlPreprocessDirectives>
<ApplyXmlEscape>True</ApplyXmlEscape>
<SkipIISReset>True</SkipIISReset>
</PropertyGroup>
<PropertyGroup>






<ProductVersion>1.0.0</ProductVersion>
<ProductId>084986b1-d675-4383-b0ed-da2e3f4e3998</ProductId>

<ProductName>HelloWorld for BizTalk</ProductName>
<Manufacturer>Deployment Framework User</Manufacturer>
<PackageDescription>HelloWorld</PackageDescription>
<PackageComments>HelloWorld</PackageComments>

<ProductUpgradeCode>4975288c-1b94-4d42-868b-f166cdc02224</ProductUpgradeCode>
</PropertyGroup>



<PropertyGroup Condition="'$(Configuration)' == 'Debug'">
<DeploymentFrameworkTargetsPath>$(MSBuildExtensionsPath)\DeploymentFrameworkForBizTalk\5.0\</DeploymentFrameworkTargetsPath>
<OutputPath Condition="'$(TeamBuildOutDir)' == ''">bin\Debug\</OutputPath>
<OutputPath Condition="'$(TeamBuildOutDir)' != ''">$(TeamBuildOutDir)</OutputPath>
<DeployPDBsToGac>false</DeployPDBsToGac>
</PropertyGroup>
<PropertyGroup Condition="'$(Configuration)' == 'Release'">
<DeploymentFrameworkTargetsPath>$(MSBuildExtensionsPath)\DeploymentFrameworkForBizTalk\5.0\</DeploymentFrameworkTargetsPath>
<OutputPath Condition="'$(TeamBuildOutDir)' == ''">bin\Release\</OutputPath>
<OutputPath Condition="'$(TeamBuildOutDir)' != ''">$(TeamBuildOutDir)</OutputPath>
<DeployPDBsToGac>false</DeployPDBsToGac>
</PropertyGroup>
<PropertyGroup Condition="'$(Configuration)' == 'Server'">
<DeploymentFrameworkTargetsPath>Framework\</DeploymentFrameworkTargetsPath>

<DeployPDBsToGac>true</DeployPDBsToGac>
</PropertyGroup>
<ItemGroup>
<PropsFromEnvSettings Include="SsoAppUserGroup;SsoAppAdminGroup" />
</ItemGroup>



<ItemGroup>
<Schemas Include="HelloWorld.dll">
<LocationPath>..\$(ProjectName)\bin\$(Configuration)</LocationPath>
</Schemas>
</ItemGroup>

<Import Project="$(DeploymentFrameworkTargetsPath)BizTalkDeploymentFramework.targets" />

<Target Name="CustomRedist">
</Target>
</Project>
Error :-
Starting build...
C:\Windows\Microsoft.NET\Framework\v4.0.30319\MSBuild.exe "C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj" /nologo /t:Deploy /p:Configuration=Debug
Build started 08-04-2015 17:43:51.
Project "C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj" on node 1 (Deploy target(s)).
SetModeDeploy:
DEPLOYING APPLICATION TO BIZTALK...
SetWinVer:
Running on Windows V62
Detected IIS 7
Detected 64-bit OS
GetSoftwarePaths:
Using .NET Framework Install Path 'C:\Windows\Microsoft.NET\Framework\v4.0.30319'.
Using BizTalk Install Path 'C:\Program Files (x86)\Microsoft BizTalk Server 2013\'.
Using Deployment Framework Install Path 'C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\'.
Using Deployment Framework Tools Path 'C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools'.
Using BizTalk ESB Toolkit Install Path 'C:\Program Files (x86)\Microsoft BizTalk ESB Toolkit\'.
ExportSettings:
"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\EnvironmentSettingsExporter.exe" "C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\SettingsFileGenerator.xml" "C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings"
Environment Settings Spreadsheet to XML Exporter 1.6.1
[http://EnvSettingsManager.codeplex.com]
Copyright (C) 2007-11 Thomas F. Abraham. All Rights Reserved.
Importing from SettingsFileGenerator.xml...
Output format is XmlPreprocess (multi-file).
Exporting to Exported_LocalSettings.xml...
Exporting to Exported_DevSettings.xml...
Exporting to Exported_TestSettings.xml...
Exporting to Exported_ProdSettings.xml...
Finished.
InitSettingsFilePath:
Using settings file C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml
SetPropertiesFromEnvironmentSettings:
Setting properties from environment settings file (C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml)
Setting property to value 'BizTalk Application Users'.
Setting property to value 'BizTalk Server Administrators'.
InitializeAppName:
BizTalk Application Name is HelloWorld
PreprocessBindings:
Checking syntax of XML file 'C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindingsMaster.xml'...
Syntax of XML file 'C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindingsMaster.xml' appears to be valid.
Clearing file attributes for 'PortBindings.xml'.
"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\xmlpreprocess.exe" /v /c /noDirectives /i:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindingsMaster.xml" /o:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml" /d:CurDir="C:\BTDF\Walkthrough1" /s:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml"
XmlPreprocess v2.0.18.0
Copyright (c) 2004-2013 Loren M Halvorson
XML File Preprocessor
Settings XML file: "C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml"
Preprocessing "C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindingsMaster.xml" to "C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml"...
PortBindings.xml : Set the value 'HelloWorld' of 2 node(s) matching XPath '//ApplicationName'.
"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\ElementTunnel.exe" /i:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml" /o:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml" /x:"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\adapterXPaths.txt" /encode+
Nested XML Encoder/Decoder v5.5.100.0
Copyright (C) 2005-2014 Scott Colestock, Tim Rayburn, Thomas F. Abraham
XML encodes/decodes content of element(s) by XPath. Applies escaping rules such
as > for '<'. Namespace decls, PIs, etc. of nested XML are not preserved.
XPaths : 16
Transformed Nodes : 0
Empty Nodes (skipped) : 3
No Transform Req'd (skipped) : 3
Total Matched Nodes : 6
Complete - output file has been saved.
Checking syntax of XML file 'C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml'...
Syntax of XML file 'C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml' appears to be valid.
DeployFileAdapterPhysicalPaths:
Configuring FILE adapter physical paths from binding file PortBindings.xml...
Processing FILE adapter physical paths (Send)...
Setting up path 'C:\BTDF\Walkthrough1\Out'...
Directory already exists.
Granted 'BUILTIN\Users' Full Access permissions.
Processing FILE adapter physical paths (Receive)...
Setting up path 'C:\BTDF\Walkthrough1\In'...
Directory already exists.
Granted 'BUILTIN\Users' Full Access permissions.
TerminateServiceInstancesConditional:
Attempting to terminate all service instances for BizTalk app 'HelloWorld'...
Terminated 0 service instances for BizTalk app 'HelloWorld'.
VerifyBizTalkAppExists:
Checking for existence of BizTalk application 'HelloWorld'...
Did not find BizTalk application 'HelloWorld'.
DeployAppDefinition:
BTSTask.exe AddApp -ApplicationName:"HelloWorld" -Description:"HelloWorld"
Microsoft (R) BizTalk Application Deployment Utility Version 3.10.229.0
Copyright (c) 2013 Microsoft Corporation. All rights reserved.
Information: Adding new BizTalk application "HelloWorld" to configuration database (server="BDDBESBWMV01", database="BizTalkMgmtDb")...
Information: Added application "HelloWorld".
Command succeeded with 0 errors, 0 warnings.
UndeploySchemas:
Adding assembly name 'HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f' to item group.
"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\gacutil.exe" /u "HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f"
Microsoft (R) .NET Global Assembly Cache Utility. Version 4.0.30319.1
Copyright (c) Microsoft Corporation. All rights reserved.
Number of assemblies uninstalled = 0
Number of failures = 0
DeploySchemas:
BTSTask.exe AddResource -Type:BizTalkAssembly -Source:"..\HelloWorld\bin\Debug\HelloWorld.dll" -ApplicationName:"HelloWorld" -Options:GacOnAdd,GacOnImport,GacOnInstall
Microsoft (R) BizTalk Application Deployment Utility Version 3.10.229.0
Copyright (c) 2013 Microsoft Corporation. All rights reserved.
Information: Adding resource (-Type="System.BizTalk:BizTalkAssembly" -Luid="HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f") to application "HelloWorld"...
Serialized BizTalk assembly "HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f" from "..\HelloWorld\bin\Debug\HelloWorld.dll".
Information: Validating resources (count=1)...
* Validating resource (-Type="System.BizTalk:BizTalkAssembly" -Luid="HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f")...
Information: Performing change requests...
Information: Calling BeginTypeChangeRequest for all selected resource types...
PerformingBeginChangeRequest
Adding resource (-Type="System.BizTalk:BizTalkAssembly" -Luid="HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f") to store.
Information: * Performing change request on type "System.BizTalk:BizTalkAssembly" (count=1)...
Information: Deploy server="BDDBESBWMV01" database="BizTalkMgmtDb" assembly="C:\Users\dopdevbiztalkadmin1\AppData\Local\Temp\BT\PID9536\BizTalkAssembly\4b4a4387187988d2dc55c72b16113199\HelloWorld.dll"
Information: Installed the "C:\Users\dopdevbiztalkadmin1\AppData\Local\Temp\BT\PID9536\BizTalkAssembly\4b4a4387187988d2dc55c72b16113199\HelloWorld.dll" assembly into the Global Assembly Cache. (force=True)
Information: Deploy operation succeeded.
Information: Deploy server="BDDBESBWMV01" database="BizTalkMgmtDb" assembly="C:\Users\dopdevbiztalkadmin1\AppData\Local\Temp\BT\PID9536\BizTalkAssembly\4b4a4387187988d2dc55c72b16113199\HelloWorld.dll"
Saved schema "Microsoft.Samples.BizTalk.HelloWorld.POSchema, HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f".
Saved schema "Microsoft.Samples.BizTalk.HelloWorld.InvoiceSchema, HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f".
Saved map "Microsoft.Samples.BizTalk.HelloWorld.POToInvoice".
Saved message type "Microsoft.Samples.BizTalk.HelloWorld.POMessageType".
Saved message type "Microsoft.Samples.BizTalk.HelloWorld.InvoiceMessageType".
Saved port type "Microsoft.Samples.BizTalk.HelloWorld.ReceivePOPortType".
Saved port type "Microsoft.Samples.BizTalk.HelloWorld.SendInvoicePortType".
Saved orchestration "Microsoft.Samples.BizTalk.HelloWorld.HelloSchedule".
Saved schema "Microsoft.Samples.BizTalk.HelloWorld.POSchema, HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f".
Saved schema "Microsoft.Samples.BizTalk.HelloWorld.InvoiceSchema, HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f".
Saved map "Microsoft.Samples.BizTalk.HelloWorld.POToInvoice".
Saved message type "Microsoft.Samples.BizTalk.HelloWorld.POMessageType".
Saved message type "Microsoft.Samples.BizTalk.HelloWorld.InvoiceMessageType".
Saved port type "Microsoft.Samples.BizTalk.HelloWorld.ReceivePOPortType".
Saved port type "Microsoft.Samples.BizTalk.HelloWorld.SendInvoicePortType".
Saved orchestration "Microsoft.Samples.BizTalk.HelloWorld.HelloSchedule".
Information: Installed the "C:\Users\dopdevbiztalkadmin1\AppData\Local\Temp\BT\PID9536\BizTalkAssembly\4b4a4387187988d2dc55c72b16113199\HelloWorld.dll" assembly into the Global Assembly Cache. (force=True)
Information: Deploy operation succeeded.
Information: Deployed the following 1 BizTalk assemblies:
HelloWorld.dll
EXEC : warning : If any of the assemblies were previously loaded by a Host Instance, it may be necessary to restart the Host Instance for changes to take effect. [C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj]
Information: Commit the change requests...
* Performing EndTypeChangeRequest for resource type "System.BizTalk:BizTalkAssembly".
Command succeeded with 0 errors, 0 warnings.
DeploySharedAssemblies:
Deploying additional assemblies to GAC...
"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\gacutil.exe" /f /i "C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\SSOSettingsFileReader.dll"
Microsoft (R) .NET Global Assembly Cache Utility. Version 4.0.30319.1
Copyright (c) Microsoft Corporation. All rights reserved.
Assembly successfully added to the cache
Finished deploying additional assemblies to GAC.
ImportBindings:
Copying file from "C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml" to "C:\BTDF\Walkthrough1\HelloWorld.Deployment\HelloWorld_PortBindings.xml".
BTSTask.exe AddResource -Type:BizTalkBinding -Overwrite -Source:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\HelloWorld_PortBindings.xml" -ApplicationName:"HelloWorld"
Microsoft (R) BizTalk Application Deployment Utility Version 3.10.229.0
Copyright (c) 2013 Microsoft Corporation. All rights reserved.
Information: Adding resource (-Type="System.BizTalk:BizTalkBinding" -Luid="HelloWorld_PortBindings.xml") to application "HelloWorld"...
Information: Validating resources (count=1)...
* Validating resource (-Type="System.BizTalk:BizTalkBinding" -Luid="HelloWorld_PortBindings.xml")...
Information: Performing change requests...
Information: Calling BeginTypeChangeRequest for all selected resource types...
PerformingBeginChangeRequest
Updating resource (-Type="System.BizTalk:BizTalkBinding" -Luid="HelloWorld_PortBindings.xml") in store.
Information: * Performing change request on type "System.BizTalk:BizTalkBinding" (count=1)...
Information: Commit the change requests...
* Performing EndTypeChangeRequest for resource type "System.BizTalk:BizTalkBinding".
Command succeeded with 0 errors, 0 warnings.
Deleting file "C:\BTDF\Walkthrough1\HelloWorld.Deployment\HelloWorld_PortBindings.xml".
BTSTask.exe ImportBindings -Source:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml" -ApplicationName:"HelloWorld"
Microsoft (R) BizTalk Application Deployment Utility Version 3.10.229.0
Copyright (c) 2013 Microsoft Corporation. All rights reserved.
Information: Importing bindings "C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml" into application "HelloWorld" in BizTalk configuration database (server="BDDBESBWMV01", database="BizTalkMgmtDb")...
Information: Imported application "HelloWorld" bindings.
Command succeeded with 0 errors, 0 warnings.
DeploySSO:
"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\SSOSettingsFileImport.exe" "HelloWorld" /settingsFile:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml" /userGroupName:"BizTalk Application Users" /adminGroupName:"BizTalk Server Administrators"
Error persisting to SSO:
System.Runtime.InteropServices.COMException (0xC0002A18): The format of the account name is not valid. Domain accounts must include the domain name. Local accounts must not include a domain or computer name.
at Microsoft.BizTalk.SSOClient.Interop.ISSOAdmin.CreateApplication(String applicationName, String description, String contactInfo, String userGroupName, String adminGroupName, Int32 flags, Int32 numFields)
at SSOSettingsFileManager.SSOHelper.CreateApp(String appName, String userGroup, String adminGroup)
at SSOSettingsFileManager.SettingsFileImport.SaveSettingsToSSO(String affiliateAppName, String inSettings, String userGroupName, String adminGroupName)
at SSOSettingsFileManager.SettingsFileImport.Main(String[] args)
C:\Program Files (x86)\MSBuild\DeploymentFrameworkForBizTalk\5.0\BizTalkDeploymentFramework.targets(1701,5): error MSB3073: The command ""C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\SSOSettingsFileImport.exe" "HelloWorld" /settingsFile:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml" /userGroupName:"BizTalk Application Users" /adminGroupName:"BizTalk Server Administrators"" exited with code -1. [C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj]
Done Building Project "C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj" (Deploy target(s)) -- FAILED.
Build FAILED.
"C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj" (Deploy target) (1) ->
(DeploySchemas target) ->
EXEC : warning : If any of the assemblies were previously loaded by a Host Instance, it may be necessary to restart the Host Instance for changes to take effect. [C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj]
"C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj" (Deploy target) (1) ->
(DeploySSO target) ->
C:\Program Files (x86)\MSBuild\DeploymentFrameworkForBizTalk\5.0\BizTalkDeploymentFramework.targets(1701,5): error MSB3073: The command ""C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\SSOSettingsFileImport.exe" "HelloWorld" /settingsFile:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml" /userGroupName:"BizTalk Application Users" /adminGroupName:"BizTalk Server Administrators"" exited with code -1. [C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj]
1 Warning(s)
1 Error(s)
Time Elapsed 00:00:54.94

Hi Pratibha,
Thank you for posting in MSND forum.
Since
this forum is to discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor.
Based
on your issue, since it is related to the Deployment Framework for Biztalk (BTDF), so I suggest you could consult this issue directly to this Deployment Framework for Biztalk (BTDF) website:
https://biztalkdeployment.codeplex.com/discussions , you will get better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Apache Error Log mod_security: Access denied with code 400

Hi
I am seeing the Access denied with code 400 errors in the apache log's after applying CPU Patch updates below into a Dev/TEST environment
RDBMS Patches: 9032412 & 9352191 & post steps below:
@?/rdbms/admin/dbmsaqds.plb
@?/rdbms/admin/prvtaqds.plb
@?/rdbms/admin/prvtaqiu.plb
Java Fix > [ID 1082747.1]
E-Business Suite Patches & post steps below:
9323613 & 9506302
Compiled Forms PLL files using adadmin to solve the known problem below
ORA-04062: signature of package "APPS.FND_HELP" has been changed
ORA-04062: KEY-HELP trigger raised unhandled exception ORA-04062.
the error can be replicated by following the steps below:
Log in to Oracle Apps E-Business Suite (11.5.10.2) select Report Management Information Responsibility and then transaction reports. (Opens Oracle Discoverer 4i Viewer) > select either Period to date or Year to date and then select any department & and any period (date) and then apply parameters:
Error message in browser
This error (HTTP 400 Bad Request) means that Internet Explorer was able to connect to the web server, but the webpage could not be found because of a problem with the address.
For more information about HTTP errors, see Help.
Apache log shows:
error_log shows the following:
[Fri Jul 8 10:52:08 2011] [error] [client 10.180.225.5] mod_security: Access denied with code 400. Pattern match "!^([-_@|#!=A-Za-z0-9/ :.$/(/)]){0,255}([-_@|#!=A-Za-z0-9/ :.$]){0,255}$" at ARGS_NAMES. [hostname "loadbalancer.webdomain"] [uri "/discoverer4i/viewer"] [unique_id ThbTSAq0BRQAABrfK7M]
access_log shows the following:
IP ADDRESS - - [08/Jul/2011:10:51:39 +0100] "GET /disco4iv/html/images/shadow_bottom02_leading_ltr.gif HTTP/1.1" 200 861 0
IP ADDRESS - - [08/Jul/2011:10:51:39 +0100] "GET /disco4iv/html/images/seperator.gif HTTP/1.1" 200 42 0
IP ADDRESS - - [08/Jul/2011:10:51:39 +0100] "GET /disco4iv/html/images/arch_blue_bottom_ltr.gif HTTP/1.1" 200 984 0
10.180.225.5 - - [08/Jul/2011:10:51:39 +0100] "GET /disco4iv/html/images/white.gif HTTP/1.1" 200 37 0
IP ADDRESS - - [08/Jul/2011:10:51:39 +0100] "GET /disco4iv/html/images/bar_blue_leading_edge_middle_ltr.gif HTTP/1.1" 200 111 0
IP ADDRESS - - [08/Jul/2011:10:51:39 +0100] "GET /disco4iv/html/images/bar_blue_trailing_edge_middle_ltr.gif HTTP/1.1" 200 129 0
IP ADDRESS - - [08/Jul/2011:10:51:39 +0100] "GET /disco4iv/html/images/shadow_bottom_leading_edge_ltr.gif HTTP/1.1" 200 862 0
IP ADDRESS - - [08/Jul/2011:10:51:39 +0100] "GET /disco4iv/html/images/btopshadow.gif HTTP/1.1" 200 44 0
IP ADDRESS- - [08/Jul/2011:10:51:39 +0100] "GET /disco4iv/html/images/bshadow.gif HTTP/1.1" 200 59 0
IP ADDRESS - - [08/Jul/2011:10:52:08 +0100] "POST /discoverer4i/viewer HTTP/1.1" 400 227 0
I have tried to follow a number of metalink notes but unable to resolve this issue, metalink notes looked at are:
976473.1
389558.1
1313128.1 Patch 10324904 applied
394587.1
389558.1 Patch 5107107 applied
1143882.1
376992.1 Patch 3950067 applied
Any ideas or suggestions most welcome
Thank you
Regards
Arfan
Edited by: user1717313 on 08-Jul-2011 04:59

Hi JD
I have tried the steps i.e stop apps tier, run adconfig on apps tiers and then started services on apps tiers and can replicate the error
thanks
Arfan
Hi Helios
I checked note 1080465.1 Patch 9506302 has been applied & Recompile all Forms PLL files using adadmin.
I ran the sql feom the note, output below
SQL> select text from dba_source where name='FND_HELP' and line <3;
TEXT
package Fnd_Help AUTHID CURRENT_USER as
/* $Header: AFMLHLPS.pls 115.22 2009/10/12 12:56:58 nchiring ship $ */
package body FND_HELP as
/* $Header: AFMLHLPB.pls 115.115 2010/03/19 06:45:24 nchiring ship $ */
Thanks
Arfan
Edited by: user1717313 on 08-Jul-2011 05:04

How do I use infopath 2013 with visual studio 2013 to modify forms with code?

Dear all,
I am using sharepoint online and infopath 2013, I wonder how do I edit infopath 2013 forms with visual studio? When I try to edit form code it says I need visual studio 2012 and some other tools, I installed them and visual studio 2013, I wonder how
do I get rid of the message and start coding? Can someone provide a detailed procedure of doing so? I am having trouble with creating multiple items with single infopath form with repeating table on sharepoint online. Thanks.
Timothy

Hi,
According to your post, my understanding is that you want to create InfoPath form with code using Visual Studio.
More information about develop InfoPath form with Visual Studio:
http://msdn.microsoft.com/en-us/library/office/ee526362(v=office.15).aspx
http://msdn.microsoft.com/en-us/library/office/aa942693.aspx
For the second question, I suggest you can create another post , it will be easier for others to focus on one question in one thread.
Best regards

Plz reply with code

Similar Messages

Maybe you are looking for