Plz tell me about witch module is the best for me

Dear Frnds.....
i am completed MBA (HR & Marketing)
Please tell me witch SAP module is the best one for my feature
Please give me some suggestions.....

Welcome to the forum.
For information, this is not the right forum to post such questions. The right forum is provided in the link.
[Forum: Career Center |Career Center;
thanks
G. Lakshmipathi

Similar Messages

After completed as an MBA HR & System, Which module is the best for freshers ??

Hi, I am Samrat Saha. I completed my post graduation as an MBA (HR&System). I did BCA in my graduation and did Higher secondary in commerce. I want to build my career in SAP. But I have some questions::
1. If i go for SAP then which module is the best for me..??
2. As a fresher is companies showing any interest to recruit..??
3. I hard a Course from Victoria University, Melborn, That Is "Master of Business (Enterprise Resource planning System) with SAP".. Is this Master degree worthy to do??
Message was edited by: Sarah Kellman

Hello Samrat,
It is not possible to provide guidance on what career path you should take. This is a conversation you need to have with a Career Planner or perhaps one of your professors. You should follow the path you are most interested in, be it a functional role or a technical role. Ideally you may want to consider getting some work experience in both fields, and then determine which area you wish to pursue.
You state you have an MBA in HR & System....System what?? System development? Technology? Programming? Data Warehousing? Even HR is a vast area within the SAP world. We have Payroll, Recruiting, Self Services, Compensation, Time Management, Learning Management Systems, etc. Most consultants select one or two areas to pursue. There is no such thing as a single person who knows the complete SAP HR solution...it's just too big!
I will suggest that you consider taking an SAP HR course so that you can get an idea as to how large the application is. There are lots of courses available in e-learning. I would recommend either SAPHRE or HR050E to start. Once you have completed one of these, you'll be in a better position to decide what you want to do, or at least decide what you don't want to do.
Good Luck!

Which module is the best

hi i am working in some mnc but i have the doubt in my future i am working as a sap fico consultant but i want to update my studies in sap which module is the best for my future i have 3 years of sap experience in sap fico only thats why i am asking which module is the best bi,bw,tresurry,pm or any other please suggest me
Moderator: The best would be respecting the rules of SDN forum

Hello Samrat,
It is not possible to provide guidance on what career path you should take. This is a conversation you need to have with a Career Planner or perhaps one of your professors. You should follow the path you are most interested in, be it a functional role or a technical role. Ideally you may want to consider getting some work experience in both fields, and then determine which area you wish to pursue.
You state you have an MBA in HR & System....System what?? System development? Technology? Programming? Data Warehousing? Even HR is a vast area within the SAP world. We have Payroll, Recruiting, Self Services, Compensation, Time Management, Learning Management Systems, etc. Most consultants select one or two areas to pursue. There is no such thing as a single person who knows the complete SAP HR solution...it's just too big!
I will suggest that you consider taking an SAP HR course so that you can get an idea as to how large the application is. There are lots of courses available in e-learning. I would recommend either SAPHRE or HR050E to start. Once you have completed one of these, you'll be in a better position to decide what you want to do, or at least decide what you don't want to do.
Good Luck!

Which app is the best for viewing documents without sliding while zooming?

I have many novels saved under *.htm, doc and pdf.
I'm using Quick Office, but when I zoom in, I have to slide the screen from side to side just to watch the whole things, which make my eyes feel very tired.
So I need your help about which app is the best for viewing documents without sliding while zooming, I mean, when you zoom in, you just have to slide vertically to see the whole documents, and don't have to slide horizontally.

shazeal wrote:
There is a big difference between Windows and Linux, the scheduler being the biggest. Here are 3 shots from oblivion, I tried to keep the Tri-passes around 400-450k, and the texture mem is ~ the same in all 3.
The first two also have, Apache, Dovecott, Mysql, Samba, and SSHD running in the back ground, these were all stopped for the 3rd.
Gnome Desktop 2.2.4 Full bloated install - All background services running, run from gnome terminal, Firefox open. Consonance Music player running.
http://img525.imageshack.us/img525/1551 … tc5.th.jpg
Xorg only no WM, with urxvt console open to launch the game, nothing else running except background services.
http://img265.imageshack.us/img265/34/s … zu1.th.jpg
Xorg only, all non essential services stopped.
http://img225.imageshack.us/img225/7540 … zd7.th.jpg
All running on Wine 1.1.7, Oblivion is running around 150 mods, and QTP3, Body mods, High res texture packs for the character skins, with HDR lighting. As you can see the FPS does not change, it fluctuated between 19-20 on all three runs.
Especially with Dual cores, you will find that games do not loose FPS even with things like a lightweight music player running in the background. Windows scheduler simply was not made for that kind of thing, and benifits alot more from a lower number of background processes. I wont say linux does not benifit, but with Dual cores and CFS, it is not really noticable anymore.
Wait, does that mean you have better performance while you are running more stuff? Does the desktop manager handle graphics better?
This really did confuse me...

TS3694 plz tell me about restoring error 1015

plz tell me about restoring error 1015

iTunes: Specific update-and-restore error messages and advanced troubleshooting
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
You will need to look else where for help if you are attempting to, or have jailbroken your device.

CAN SOMEONE PLZ TELL ME HOW TO SHUT OFF THE LIGHT FROM FLASHING WHEN I RECIEVE A CALL?

CAN SOMEONE PLZ TELL ME HOW TO SHUT OFF THE LIGHT FROM FLASHING WHEN I RECIEVE A CALL?

Settings>general>accessibility>led flash alerts off

Can anybody tell me about SD Functionality and the main tables used in SD

Hi,
Can anybody tell me about SD Functionality and the main tables used in SD.
Thanks,
bsv.

Hi
SD FLOW
SD Flow Cycle:
INQUIRY ( VA11)
|
QUOTATION (VA21)
|
PURCHASE ORDER (ME21)
|
ORDER CONFIRMATION (VA01)
|
PICKING LIST (VL36)
|
PACKING LIST - (VL02, VL01)
|
SHIPPING (VT01)
|
INVOICE (VF21, VF01)
|
AR
Enquiry - Customer enquires about the Products services that were sold by a company - VA11
Quotation - Company Gives a Quotation for the products and Services to a Customer
Sales Order - Customer gives a Purchase order to the company agaionst which a Sales order will be raised to Customer in SAP.
VBAK: Sales Document(Header Data) (VBELN)
VBAP: Sales Document(Item Data) (VBELN,POSNR,MATNR,ARKTX,CHARG)
      Enquiry, Quotation, Sales Order are differentiated based on Doc.
      Type(VBTYP field) in VBAK,VBAP Tables( for Enquiry VBTYP = A,
      for Quotation 'B' & for Order it is 'C'.)
Delivery(Picking, Packing, Post Goods Issue and Shipment)->
Company sends the material after picking it from Godown and Packing it in a Handling Unit(box) and Issues the goods
LIKP: Delivery Table (Header Data)(VBELN,LFART,KUNNR,WADAT,INCO1)
LIPS: Delivery Table (Item Data)(VBELN,POSNR,WERKS,LGORT,MATNR,VGBEL)
      (LIPS-VGBEL = VBAK-VBELN, LIPS-VGPOS = VBAP-POSNR)
Billing - Also company bills to the customer for those deliveries
And in FI against this billing Accounting doc is created.
VBRK: Billing Table(Header Data)(VBELN,FKART,BELNR)
VBRP: Billing Table(Item Data)(VBELN,POSNR,FKIMG,NETWR,VGBEL,VGPOS)
      (VBRP-AUBEL = VBAK-VBELN, VBRP-VGBEL = LIKP-VBELN)
      Apart from these tables there are lot of other tables which starts with
      V, but we use the following tables frequently.
other tables and imp fields
VBUK: All Sales Documents status & Admn. Data(Header)(VBELN,VBTYP)
      VBTYP= C(Sales Order) VBTYP=J(Delivery) VBTYP=M(Invoice)
VBUP: Sales Documents status & Admn. Data(Item)(VBELN,POSNR)
VBEP: Sales Doc. Schedule Lines Data(VBELN,POSNR,EDATU,WMENG)
VBKD: To get sales related Business data like Payment terms etc.(VBELN,ZTERM)
VBFA: sales document flow data(VBELV,VBELN,POSNV,VBTYP)
VBPA: Partner functions Data(VBELN,PARVW,KUNNR,LIFNR)
VEDA: Contract Data(VBELN,VPOSN)
VEDAPO: Contract Data(VBELN,VPOSN)
KONA: Rebate Agreements (KNUMA,VKORG,VTWEG,SPART)
VBRL: SD Document: Invoice List(VBELN,POSNR,VBELN_VF,NETWR,KUNAG)
VKDFS: SD Index: Billing Indicator(FKTYP,VBELN,FKART,VKORG)
VBSK: Collective Processing for a Sales Document Header(SAMMG,SMART)
VBSS: Collective Processing: Sales Documents(SAMMG,VBELN,SORTF)
VRKPA: Sales Index: Bills by Partner Functions(VBELN,BELNR,KUNDE,PARVW)
VRPMA: SD Index: Billing Items per Material(MATNR,VBELN,BELNR,KUNNR)
TVLKT: Delivery Type: Texts(LFART,VTEXT)
KNA1: Customer Master-General(KUNNR,NAME1,LAND1)
KNB1: Customer Master(Company Code)(KUNNR,BUKRS,PERNR)
KNC1: Customer Master Data (Transaction Figures)(KUNNR,BUKRS,GJAHR)
KNVK: Customer Master Contact Partner(PARNR,KUNNR,NAME1)
KNVV: Customer Master sales data(KUNNR,VKORG,VTWEG,KDGRP)
KNBK: Customer Bank Details(KUNNR,BANKS,BANKL,BANKN)
KNVH: Customer Hierarchy (HITYP,KUNNR,VKORG,VTWEG,SPART)
KNVP: Customer Master Partner Functions(KUNNR,PARVW,KUNN2)
KNVS: Customer Shipment data(KUNNR,VSTEL,TRANS)
KNVI: Customer Tax data(KUNNR,ALAND,TATYP)
LFA1: Vendor Master-General (LIFNR,NAME1,ORT01)
LFB1: Vendor Master(Company Code)(LIFNR,BUKRS,PERNR)
LFC1: Vendor Master (Transaction Figures)(LIFNR,BUKRS,GJAHR)
MARA: Material Master-General (MATNR,MTART,MATKL)
MARC: Material Master-Plant data(MATNR,WERKS,EKGRP)
MARD: Material Master- St.Location Data(MATNR,WERKS,LGORT,LABST)
EBEW: Sales Order Stock Valuation(MATNR,VBELN,BWKEY,BWTAR)
TVKO: Sales Organizations(VKORG)
TVTW: Distribution Channel(VTWEG)
TSPA: Divisions(SPART)
TVKOV: Distribution Channels for S.Orgn(VKORG,VTWEG)
TVKOS: Divisions for S.Orgn(VKORG,SPART)
TVTA: Sales Areas(VKORG,VTWEG,SPART)
TVBUR: Sales Offices(VKBUR,ADRNR)
TVKBT: Sales Office Texts(VKBUR,SPRAS,BEZEI)
TVKBZ: Sales Office Assign.to Sales Area(VKORG,VTWEG,VKBUR)
TVKGR: Sales Group(VKGRP)
TVGRT: Sales Group Texts(VKGRP,SPRAS,BEZEI)
TVBVK: Sales Group to Sales office(VKBUR,VKGRP)
TVKWZ: Plants Assign.to S.Orgn(WERKS,VKORG)
T171T: Sales District Texts(BZIRK,BZTXT,SPRAS)
TVLA: Loading Points(LSTEL)
TVST: Shipping Points (VSTEL)
TVSWZ: Shipping Point to Plant(VSTEL,WERKS)
TVPT: Item Categories (PSTYV)
TINC: Customer Incoterms(INCO1)
T077D: Customer Account Group (KTOKD)
T001W: Plants (WERKS)
T001L: Storage Locations (LGORT)
T499S: Locations(WERKS,STAND,KTEXT)
TWLAD: To get address of Storage Location and Plant(LGORT,ADRNR)
TVAK: Sales Document (Order) Types (AUART)
TVAU: Sales Documents: Order Reasons (AUGRU)
TVFK: Billing Document Types (FKART)
TVLK: Delivery Types(LFART)
TVSB: Shipping Conditions (VSBED)
TTDS: Transportation Points(TPLST)
TVKT: Account Assignment Groups (KTGRD)
KONV: Condition Types pricing)(KNUMV,KSCHL,KWETR)
ADRC: To get Addresses of Partners(ADDRNUMBER,NAME1)
VBBE: Sales Requirements: Individual records(VBELN,POSNR,MATNR)
VBBS: Sales Requirement totals Record(MATNR,WERKS,LGORT,CHARG)
VBKA: Sales Activities Data(VBELN,KTAAR)
VBPV: Sales Document Product Proposal(VTWEG,MATNR,KUNNR,CHARG)
T682: Access Sequences (KOZGF)
T682T: Access Sequence Texts (KOZGF,VTXTM)
T683: Pricing Procedures (KALSM)
T683T: Pricing Procedures Texts(KALSM,KAPPL,SPRAS,VTEXT)
T685: Pricing Condition Types (KSCHL)
T685T: Condition Type Texts(KSCHL,SPRAS,KAPPL,VTEXT)
KONH: Conditions (Header)(KNUMH,KAPPL,KSCHL)
KONP: Conditions (Item)(KNUMH,KOPOS,KAPPL,KSCHL)
KONV: Conditions (Transaction Data)(KNUMV,KSCHL,KBERT,KWERT)
KOND: Conditions (KNUMD,ZUSKO,KSCHL)
for sd go through the links
http://www.sapgenie.com/abap/tables_sd.htm
Please check this SD online documents.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCSD/CAARCSD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_SD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSD/BCBMTWFMSD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOLISPLN/LOLISPLN.pdf
Also please check this SD links as well.
http://help.sap.com/saphelp_47x200/helpdata/en/92/df293581dc1f79e10000009b38f889/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/dd/55f33e545a11d1a7020000e829fd11/frameset.htm
http://www.sap-basis-abap.com/sapsd.htm
http://www.sap-img.com/sap-sd.htm
http://www.sapgenie.com/abap/tables_sd.htm
http://searchsap.techtarget.com/featuredTopic/0,290042,sid21_gci961718,00.html
http://www.sapbrain.com/TUTORIALS/FUNCTIONAL/SD_tutorial.html
All help ebooks are in PDF format here
http://www.easymarketplace.de/online-pdfs.php
Reward points if useful
Regards
Anji

HT1270 Hi, I have bought macbook pro a year back and it has 4 GB RAM and its mid 2012 model can u tell me whether if i give the macbook for upgradation of memory will they do it and what would be the cost

Hi, I have bought macbook pro a year back and it has 4 GB RAM and its mid 2012 model can u tell me whether if i give the macbook for upgradation of memory will they do it and what would be the cost.

You need to take your MacBook Pro to your Apple store genius bar and check that they will do the upgrade for you...price for 4 GB memory used to be $200 but you will have to check with them for the current cost.
You can also check with OWC, http://www.macsales.com and see what their cost is and decide if you want to do it yourself. Cost will be about half of that at the Apple store.

Hello! Could you tell me which configuration is the best for graphic works, like making large POSTERS or BANNERS (for instance 2800X500 cm)???

Hello! Could you tell me which configuration is the best for graphic works, like making large POSTERS or BANNERS (for instance 2800X500 cm)???

scorpiorey wrote:
I just create file and send it to printer-house.
Never done that size files (posters) before, so, didn't know it would be such problem.
Model Name:          MacBook Pro
Model Identifier:          MacBookPro8,1
Processor Name:          Intel Core i7
Processor Speed:          2.8 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache (per Core):          256 KB
L3 Cache:          4 MB
Memory:          4 GB
Boot ROM Version:          MBP81.0047.B24
SMC Version (system):          1.68f98
this is what i have. now i know that it's not enough
If that's what you're using and it actually works, albeit slowly, I'd suggest taking The hatter's advice and go with the 6 core Mac Pro with 24GB of RAM and the 5870 video card. The RAM could come from here: http://eshop.macsales.com/shop/memory/Mac-Pro-Memory#1333-memory

Does Vision Development Module obviate the need for the Vision Run Time Engine?

I have several computers with the full version of Labview (8.0.1 and\or 8.2) as well as the most recent version of the Vision Development Module (VDM 8.2.1), all fully registered and activated. In addition, I have one computer we have designated the "build" computer which has the professional version of LV 8.2 as well as LV 8.0.1 Full version w/ Application Builder (we have delayed migrating certain applications to 8.2 for various reasons). Instead of distributing applications as source distributions to these computers (uncompiled VIs), we would like to use our build computer to compile applications that make use of the Vision image processing VIs. I know that all of these computers have the appropriate LV run time engines installed, but I was wondering if I need to install (and thus purchase) the Vision Run Time Engine for each of these computers. I know that when you install VDM, you also get a copy of the vision RTE (in C:\Program Files\National Instruments\Vision\Run-Time Engine). Does this mean the engine is already installed and ready to run compiled applications? Or do we need to pay for the engine on each computer?

The Development module includes the RTE for that machine.
For the other machines, you will need to purchase the Vision RTE and install and activate for each machine. See the KB article below for more details.
http://digital.ni.com/public.nsf/websearch/F1699570F78FECBB86256B5200665134?OpenDocument
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

Witch MacBook is the best to buy if i want to Edit videos and photos? Any advice?

Witch MacBook is the best to buy if i want to Edit videos and photos? Any advice?

Hi Catflow and welcome to Apple Support.
So it kind of depends on how intensive your editing will be, especially videos. A professional video editor will have multiple monitors and the fastest possible Mac. I knew a video editor in Chicago who ran with 5 36" Cinema Monitors and an 8 Core Mac Pro.
A photo editor will have the largest possible monitor and processor speed would be less critical. I had a client who was a professional photographer. She wanted to buy an iMac. I told her she needed a Mac Pro with two Cinema Monitors. Later she thanked me because she said, "The clients see my pictures on those two huge monitors and they are immediately sold."
So if you want to stay with a laptop get the largest display you can with the max memory and maybe even a SSD. You could also use a smaller more portable model with an external display.
I put 8GB RAM and a SSD in this early 2011 13" MacBook Pro. Photoshop CS6 opens in 3 seconds vrs. 45 before the upgrade! I don't do a lot of photo editing. If I did and have done I'd use my Wife's Mini with the 23" Cinema display or my Daughter's iMac i5 with the 21.5" display!

I want to check the status of application No. For it is written in my account was canceled and I did not do so I urgent news about his condition and the reason for canceled I redial the same time as the sender befo

Thank you for your attention
I want to check the status of application No. W439602096
For it is written in my account was canceled and I did not do so
I urgent news about his condition and the reason for canceled
I redial the same time as the sender before you
We are waiting for you

This is a user to user forum. You are not talking to Apple here. We cannot help you; you will need to contact wherever the order was placed.

Is Java the best for creating business apps?

Hello everyone, I'm new to this. I programmed a bit in VB6 (lame to macho-coders... I know), and I really enjoyed it. Well I havent touched it for years and I havent even bothered trying to remember what I knew after finding out its all gone with .Net.
So I'm employed at a new firm and I'd like to get back the old app building skills I had and more.
I did alot of research on languages and decided that Java was my pick, but I'd like confirmation from someone who knows.
FYI, I only created very simple apps with VB6 a few years ago.. I do not plan to start programming as a career.
I just remember enjoying it immensely and have done side projects in the past for friends and business associates.. but I never got high powered.
I'd like to get deep into a language.
Did I make the right decision between C#/VB.net and Java? Try to be as unbiased as possible, as I realize this is a Java forum.
I chose after reading mainly these links:
http://www.csharpsoft.com/css/article.php?sid=9
http://www.c-sharpcorner.com/faq/why_cs.asp
http://www.aspnetpro.com/Opinion/2002/04/asp200204pl_o/asp200204pl_o.asp
http://www.course.com/techtrends/java_0899.cfm (this one was especially convincing for me)
http://www.eweek.com/article2/0,1759,1499017,00.asp
http://discuss.fogcreek.com/joelonsoftware/default.asp?cmd=show&ixPost=1751
The just I got from most sources was: pick the language based on what you Want to Do.
I want to create business apps, not necessarily cross-platform able ones. 98% of the time my apps will be used on Windows platforms anyway. And the performance boost from MS languages is enticing.
Plus I've read from a few sources that Java is NOT cross platform interopertable.
My main reason for posting is that I'm double guessing my Java inclinations.. because I'm having trouble finding tutorials for "guys like me".
I'd like to know exactly what the heck Swing is, I mean... I got THIS,
"The javax.swing package of classes is used to create GUI components for applets and applications. Project Swing classes enable programmers to specify a different look and feel for each platform, or a uniform look across all platforms. Swing is the project code name for the lightweight GUI components in JFC."
But I have been doubting my decision enough to not download and start playing with whatever the heck Swing is.
Also, AWT looks important but I do not quite grasp how that comes into play either.
Basically I have the latest Java and Netbeans downloaded... is this all I need besides to find a great tutorial (that holds my hand) to get started? Does this Java/Netbeans package have Swing and AWT included inside them?
Or should I stick with VB and go back to VB.Net to create my easy "crankem out" apps?
I have a sinking feeling that would be best for a non-career programmer hobbiest like myself..
Originally I figured Java would teach me a much more popular terse based syntax that would be much better to know if I ever did move on....
Thanks for reading.

THANK YOU to everyone that has replied this far. As you might have been able to tell from my disoriented post.. I have alot of questions and some questions I'm not exactly sure how to ask.
To define business applications- I was referring to these two ideas that SteveW2 coined: "Applications that front end a database? Multi user thin client apps? "
Mostly front end to a database and thin client apps.
Also, I should add my employer does have a full MSDN subscription so I do have access to everything at MSDN.
We have Visual Studio .Net 2003 at work as well. My company mostly programs in "MS" languages FYI.
I hope it was quite clear that I'm no zealot on brand. I'm a complete capitalist (hence the name), and have always been, "best of breed". So I have absolutely no language preference.
For general info, I am the network admin at my place of business and also do sales with small to mid-sized businesses.. but my degree is in local area network technology.
My interest in beginning programming again stems just for my personal interest... someday I DO plan to start my own business but not for quite some time. So programming is just something I used to enjoy to a small extent.
To be precise, I was only exposed to VB6. None before, none after. I created fun apps like a calculator, a simple database program, a program that half-heartedly 'locked' you out of a Win95/98 workstation without the password... things like that. And for now and the foreseeable future, thats an idea of the extent I wish to take this new venture.
I found it very simple and easy... good things as long as its still powerful... and it appears DotNet has equalized the languages (J#/C#/C++/C/VB) to a large extent. Please feel free to elaborate on why I'm correct or not correct on this analysis.
To address my "98%" statement, I meant in the foreseeable future everything I would ever create will be on ran on a Win32 system. But I do play around with Linux and wouldnt scoff at the idea of interoperability..
Being locked into MS platforms doesnt bother me either. So you probably have a feel for my neutrality.
I never realized how some people feel very strongly about languages (referring to most of the web, the responses here seem to be very fair considering I'm at Sun's site itself)!
I'm definitely more confused than ever now with the conflicting opinions.
But providing exactly WHAT I want to do with the language, will help.
I provided an example of some of the things I've done, and plan to do.. but there is one thing I've been wanting to create for years that will probably give you the best idea for my ambitions.
I'd like to create a family genealogy app, that allows me to integrate my GEDCOM files (the standard for family history files) into, integrate easy to view family photos/stories/videos... I'd like to put this program on a CD and distribute it at the family christmas some year.
Whatever language would be the best for this? Keep in mind even though I dont have strong feelings about having interoperability or not... that my time that I'm going to be investing in language "X", I DO feel it important that I learn good coding practice.
Something I always doubted about the extremely easy, and lax, VB6.
Thanks again for reading and taking the time to reply.

IS Indesign the best for me (or Publisher)

Hi,
I am working for a company and have to design a few procut data sheets, broshures and finally a whole product catalouge.
I really would like to take Indesign because it is very famous and "the standard" for these topics.
But it is really expensive. I have some experience with the program. But I have some questions to you. Thank you a lot for answering my questions:
1.) other members of my company would like to use Microsoft Publisher (they all usw Microsoft so that's no disadvantage)
Are there any advantages that M Publisher is not able to do?
I don't need any 3D or very special stuff. Just for my topics above.
2.) I want to create single sheets. These sheets should be able to combine in a whole document.
Is this possible with these "books"?
Is it possible to easy create a table of content? automatically? an index that is changing if number of pages or size of documents change?
Is it possible to link inside the pdf document that users can jump from table of content to a specific chapter by clicking?
3.) How should the structure have been done?
Do I need 2 versions for each file? One for printing and one for pdf viewing on computers?? Or is it possible just to create one?
Also with different languages. Is it recommend to use the laysers for this thing?
Or not (because of the idea of creating an easy catalouge.) I need 2 versions. So does it make sense to combine it in one single file?
The catalouge has to be switched otherwise in every single paper. isn't it?
Are there any other tips and comments?
Maybe I use a differnt approach or designing idea?
thanks a lot for helping me!

Ok that's clear. I mean do I need 2 files on indesign? On for web and one for printing. because when starting a new project,Indesing asks me which model I should use.
The other file (pdf) is just exporting isn't it?
Thanks a lot for your help.
Ulf
Am 21.08.2012 um 05:13 schrieb c.pfaffenbichler:
Re: IS Indesign the best for me (or Publisher)
created by c.pfaffenbichler in InDesign - View the full discussion
Yes you need 2 files, one for you native program(MP or InDesign), and the other your .pdf for viewing on computer that do not have MP or InDesign.
And possibly a second (separated, hires, with bleed etc.) pdf for the actual print on paper if that is intended.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4635909#4635909
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4635909#4635909. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in InDesign by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I am considering getting an iphone... Which model is the best for me to get?

I am considering getting an iphone... I do not care about getting the "latest gadget", but have all apple products and would love the convenience of the calendar, music, camera, etc... on my phone. Which model is the best for me to get?
Is it really worth it for the newest (and most expensive) model, or is the 3G sufficient for regular use? or is the 4 now the most basic model I should invest in? or do I really have to get the 4S?

tonefox wrote:
One wonders why you are hanging around Apple forums...
Many have wondered before, even I, yet in the end I settled for a reason... "unbiased help":
iPhone 4S Battery Life: Best solutions and procedures for 1st time user: 1-Do you have a battery life issue (learn first what the usage time spec is about) 2-What can you try to remedy the situation without reading 500 pages of posts

Plz tell me about witch module is the best for me

Similar Messages

Maybe you are looking for