Plz tell me where we use SP 17

Hi every one,its first time came accross SP17.I am in BW3.5.Where do we use this SP 17.And wht it does in Bw.Can any one plz forwad some note r documents plz
[email protected]
Points will be give .thanks in advance

Hi sam,
SP 17 is service pack 17 in sap 3.5.
service packs are installed by basis team.

Similar Messages

  • Can you tell Compressor where to use a higher bitrate?

    I have a 2 hour project, the last twenty minutes of it being "behind the scenes" footage shot on DV.
    This 20 minutes of the program can be lower than the average 5.0Mbps that the 2 hour DVD setting uses.
    And I have several short sections with fast moving multilayer graphics which I would like to have the best quality possible.
    Is there a way to tell Compressor where quality is more important and where it's not?
    I am using Final Cut Studio 2.
    Thanks for your help.

    ...but don't expect even close to the access speeds you would get with a hard drive!  That's fine of course since you should use it for example, as an emergency boot drive, or transporting stuff to and from other locations, or backups for selected stuff.

  • Would you plz tell me where i am wrong using JasperReports?

    Hi everybody!
    I use JasperReports to create a simple report
    here is the code:
    public class TestReport {
         private class TestObject{
              String text = "";
             public TestObject(String text){
                  this.text = text;
             public String getText(){
                  return this.text;
             public void setText(String text){
                  this.text = text;
         public TestReport() {
         public static void main(String[] args) {
              TestReport t = new TestReport();
              HashMap<String, TestObject> myParams = new HashMap<String, TestObject>();
              myParams.put("id", t.new TestObject("id"));
              try{
                   JasperReport jasperReport =
                        JasperCompileManager.compileReport("reports/test.xml");
                   JasperPrint jasperPrint = JasperFillManager.fillReport(
                             jasperReport,
                             myParams,
                             //new HashMap(),
                             new JREmptyDataSource());
                   JasperExportManager.exportReportToPdfFile(jasperPrint,
                             "reports/test.pdf");
              catch (JRException e){
                   e.printStackTrace();
              /*String dirname = "d:/temp/";
            String filename = "simple.pdf";
            try {
                Runtime rt=Runtime.getRuntime();
                Process pr=rt.exec("c:/Program Files/Adobe/Acrobat 7.0/Reader/AcroRd32.exe " + "\"" + dirname + filename + "\"" );
            catch (Exception e) {
    }

    No, it's your job to identify the problem. Are you getting compiler errors? If so, what are they? Or are you getting run-time exceptions? If so, what are they and what does the stack trace say? Or does the code not do what you wanted it to do? If so, what did you want it to do and what does it do instead?
    And I believe you will find JasperReports has its own forum where you can ask questions, once you have formulated a question.

  • Plz tell me how to use JSpinner with JTable

    I have retrieve records from database but as the number of records(rows) are more than 1000 , i want to use JSpinner with JTable . plz solve my problem by giving the appropriate code for the same.

    hi
    check this links
    http://www.exampledepot.com/egs/javax.swing.table/CustRend.html
    http://java.sun.com/docs/books/tutorial/uiswing/components/table.html
    hope this will help you.. this explains exactly what you want.
    regards
    Aniruddha

  • HT2589 i haven't credit card. plz tell me can i use apple id without credit card?

    is it possible to use apple id without credit card?

    There is no need to have a CC to create an apple ID. I think you meant iTunes store account. But you can create one without a CC. Just follow the this http://support.apple.com/kb/HT2534?viewlocale=en_US
    Good Luck!

  • I wnat to add new fieldtext in the alv list output plz tell me

    hi,
    i whant add new fieldtext in the list output, plz tell me where can i modify it.
    CORRECTIONS
    DATE       CORRECTION NOTE    AUTHOR DESCRIPTION
    09.03.2001 L9CK045451 0388404 XSC    Wrong list output for multiple Os
    05.06.2001 AL0K023393 0410219 Lud    Wrong keydate for search with
                                         Pchbegda and pchendda.
    22.04.2004 S6BK024775 730486  PS     Too many selection parameters in
                                         header
    19.06.2006 S6BK035494 956731  JF     No sorting by qualification
    REPORT RHPK_FIND_PERS_WITH_EXPIRED_QU MESSAGE-ID PQ.
    DATA  AUFRUF(8).
    TABLES : OBJEC, GDSET.
    DATA  LIST.
    DATA  MARKFIELD(1) TYPE C.
    ALV_POOL
    TYPE-POOLS SLIS.
    INCLUDES
    INCLUDE .
    INCLUDE RHPEINI0.
    TABLES
    DATA: orgeh_BUFFER like hrobject OCCURS 1 WITH HEADER LINE.
    DATA: OBJECTS    LIKE HRSOBID    OCCURS 1 WITH HEADER LINE.
    DATA: h_OBJEC    LIKE objec    OCCURS 0 WITH HEADER LINE.
    DATA: pers_objects LIKE HRSOBID    OCCURS 1 WITH HEADER LINE.
    DATA: QUALI_TAB LIKE QUALI_PROF OCCURS 1 WITH HEADER LINE.
    DATA: PERSONS LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
    DATA: H_PERSONS LIKE HRPE_PROFL OCCURS 1 WITH HEADER LINE.
    DATA: LIST_OUTPUT LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
    DATA: BOOK_EVENT_TAB LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
    DATA: PLAN_EVENT_TAB LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
    DATA H_SUITED LIKE DYNP_PCRIT-SUITED.
    DATA: O_COLOR LIKE STREEATTR-COLOR.
    DATA: O_INTENSIV LIKE STREEATTR-INTENSIV.
    DATA  SHOW_KEY.
    DATA EVENT.
    DATA: HTEXT LIKE P1000-STEXT.
    DATA: EVENT_TAB LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
    DATA: COLLECTED_EVENTS LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
    DATA: SUBTY_TAB LIKE HRPE_OTYPE_SUBTY OCCURS 0 WITH HEADER LINE.
    DATA: BEGIN OF  HIDE_STRU,
            PERSTYPE LIKE HROTYPE-OTYPE,
            PERSOBID LIKE HRSOBID-SOBID,
            PERSTXT LIKE PERSQ_PROF-STEXT,
            SCALE_ID LIKE HRPE_PROFQ-SCALE_ID,
            TRAININGTYPE LIKE HRP1000-OTYPE,
            TRAININGID   LIKE HRP1000-OBJID,
            TRAININGSTXT LIKE HRP1000-STEXT,
            QUALID LIKE QUALI_PROF-QUALID,
            QUALTEXT LIKE QUALI_PROF-QUALSTXT,
          END OF HIDE_STRU.
    DATA: BEGIN OF EXTAB OCCURS 10,
             FCODE LIKE RSMPE-FUNC,
          END OF EXTAB.
    DATA:  CURRENT_QUALID LIKE QUALI_PROF-QUALID.
    DATA:  CURRENT_TRAININGSID LIKE HRP1000-OBJID.
    DATA:  CURRENT_TRAININGTYPE LIKE HRP1000-OTYPE.
    DATA: SUBRC LIKE SY-SUBRC.
    VARIABLES
    DATA: OBJID LIKE P1000-OBJID.
    DATA: H_LINE_COUNT TYPE I.
    DATA: H_TABIX1 LIKE SY-TABIX.
    ALV-Variables
    DATA: alv_events_line    TYPE slis_alv_event.         "header line
    DATA ALV_EVENTS TYPE SLIS_T_EVENT.
    DATA GT_ALV_LIST_TOP_OF_LIST TYPE SLIS_T_LISTHEADER.
    DATA: gt_events TYPE SLIS_T_EVENT.
    DATA G_REPID LIKE SY-REPID.
    DATA G_VARIANT LIKE DISVARIANT.
    DATA ALV_USERCOMMAND TYPE SLIS_FORMNAME VALUE 'USER_COMMAND'.
    DATA G_USERCOMMAND_FOR_RANKINGLIST TYPE SLIS_FORMNAME VALUE
    'USER_COMMAND_FOR_RANKINGLIST'.
    DATA ALV_LAYOUT TYPE SLIS_LAYOUT_ALV.
    DATA: GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
    DATA: ALV_OUTPUT  LIKE HRPDV_EXPIRED_Q OCCURS 0 WITH HEADER LINE.
    DATA: Help_OUTPUT LIKE HRPDV_EXPIRED_Q OCCURS 0 WITH HEADER LINE.
    begin of Dynpro 5020 - POPUP: WEITER
    DATA: OK_CODE_5020   LIKE SY-UCOMM.
    DATA: NO_ORG.                          "if no org selected
    DATA: H_TABIX LIKE SY-TABIX.
    begin of Dynpro 20nn - Header
    TABLES: DYNP_RHPP.
    SELECTION SCREEN
    SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-005.
    PARAMETERS:
       H_EVENTS LIKE DYNP_RHPP-GEN_TRAIN,  "with training sugg
       H_QUAL   LIKE DYNP_RHPP-EXPIRED_QUAL. "with Qual
    SELECTION-SCREEN END OF BLOCK B3.
    INITIALIZATION
    INITIALIZATION.
      PERFORM READ_T77S0_PARAMETERS_FOR_PE.
    get user parameters/Planvariante und Beginndatum setzen:
      PCHOTYPE = $ORGEH.
      CALL FUNCTION 'RHP0_USER_PARAMETERS_GET'
           EXPORTING
                FILL_IF_INITIAL = 'X'
           IMPORTING
                PLVAR           = PCHPLVAR
                BEGDA           = PCHBEGDA
                endda           = Pchendda    "Correction 0410219
                WITH_KEY        = SHOW_KEY
              SUBSTITUTE      =
              ESSENTIAL       = only_essential
                ORG_UNIT        = PCHOBJID-LOW
          EXCEPTIONS
                OTHERS     = 0.
    PCHBEGDA = LOW_DATE.   "Correction note: 0410219 / AL0K023393
    get menu text for key on/off
      PERFORM USER_MENU_TEXT_KEY(SAPLRHP0) USING G_MENU_TEXT_KEY.
    start-of-selection
    START-OF-SELECTION.
    terminate the selection if objid isn't given
      READ TABLE PCHOBJID INDEX 1 TRANSPORTING NO FIELDS.
      IF SY-SUBRC <> 0
      AND PCHOBJID IS INITIAL.
        PCHOBJID-SIGN   = 'I'.
        PCHOBJID-OPTION = 'EQ'.
        PCHOBJID-LOW    = '00000001'.
        APPEND PCHOBJID.
        NO_ORG = TRUE.
      ELSE.
        NO_ORG = FALSE.
      ENDIF.
    GET OBJEC.
    terminate the selection if objid isn't given
      IF NO_ORG = TRUE.
        EXIT.
      ENDIF.
      OBJECTS-PLVAR = PCHPLVAR.
      OBJECTS-OTYPE = PCHOTYPE.
      OBJECTS-SOBID = OBJEC-REALO.
      APPEND OBJECTS.
    Für das lesen der Organisationseinheit
      h_OBJEC-PLVAR = OBJEC-PLVAR.
      h_OBJEC-OTYPE = OBJEC-OTYPE.
      h_OBJEC-OBJID = OBJEC-objid.
      append h_objec.
      Read table h_objec index 1 transporting no fields.
      if sy-subrc = 0.
    Fill Buffer
        orgeh_BUFFER = h_OBJEC.
        orgeh_BUFFER[] = h_OBJEC[].
        CALL FUNCTION 'RH_TEXT_BUFFER_FILL'
          TABLES
            OBJECTS = orgeh_BUFFER.
        Loop at h_OBJEC.
          H_TABIX = SY-TABIX.
    Read text of organisation
          CALL FUNCTION 'RH_READ_OBJECT'
               EXPORTING
                    PLVAR     = h_OBJEC-plvar
                    OTYPE     = h_OBJEC-otype
                    OBJID     = h_OBJEC-OBJID
               IMPORTING
                  OBEG      = h_objec-begda
                  OEND      = h_objec-endda
                   SHORT     = short
                    STEXT     = h_OBJEC-stext
              EXCEPTIONS
                    NOT_FOUND = 1
                    OTHERS    = 2.
          IF SY-SUBRC = 0.
            modify h_OBJEC index H_TABIX.
          ENDIF.
        endloop.
      endif.
    end-of-selection
    END-OF-SELECTION.
    read objects of the organizational unit
      OBJID = OBJECTS-SOBID.
      CALL FUNCTION 'RHPH_PICK_UP_PERSONS'
          EXPORTING
               BEGDA      = PCHBEGDA    "Correction 0410219
               ENDDA      = PCHENDDA    "Correction 0410219
             STATUS     = '1'
               WITH_STEXT = 'X'
           TABLES
                OBJECTS    = OBJECTS
                PERSONS    = H_PERSONS
          EXCEPTIONS
               UNDEFINED  = 1
               OTHERS     = 2.
      IF SY-SUBRC = 0.
    prepare objects !
        objects-otype = h_persons-ttype.
        objects-sobid = h_persons-tobid.
        append objects.
      ELSE.
        EXIT.
      ENDIF.
    CLEAR OBJECTS. REFRESH OBJECTS.
    prepare sel_objects !
      pers_objects-PLVAR = PCHPLVAR.
      LOOP AT H_PERSONS.
        pers_objects-OTYPE = H_PERSONS-TTYPE.
        pers_objects-SOBID = H_PERSONS-TOBID.
        APPEND pers_objects.
      ENDLOOP.
    sort objects and delete adjacent duplicates
      SORT Pers_OBJECTS BY PLVAR OTYPE SOBID.
      DELETE ADJACENT DUPLICATES FROM Pers_OBJECTS COMPARING PLVAR OTYPE
    SOBID.
      CALL FUNCTION 'RHPK_FIND_PERS_WITH_EXPIRED_Q'
           EXPORTING
               PLVAR            = PCHPLVAR
               CHECK_BEGDA      = PCHBEGDA
               CHECK_ENDDA      = PCHENDDA
               SUBTY            = $ownsb                        "'B032'
             only_essential   =
             target_otype     =
             target_ap_iea    =
           TABLES
                IMP_PER_TAB     = pers_objects
                QUALI_TAB       = QUALI_TAB
                PERSONS         = LIST_OUTPUT
            altq_tab          =
          EXCEPTIONS
               NO_QUALIFICATION = 1
               NO_PERSON_FOUND  = 2
               OTHERS           = 3.
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    100% case
      READ TABLE pers_objects INDEX 1 TRANSPORTING NO FIELDS.
      IF SY-SUBRC = 0.
        sort pers_objects by otype sobid.
      check the selected persons: if org.unit was selected !
        Loop at pers_objects.
          H_TABIX = SY-TABIX.
          READ TABLE LIST_OUTPUT WITH KEY  OTYPE = pers_objects-OTYPE
                                           SOBID = pers_objects-SOBID
                                           BINARY SEARCH.
          IF SY-SUBRC <> 0.
          person doesn't belong to the selected org.unit
          DELETE LIST_OUTPUT INDEX H_TABIX.
          ENDIF.
        ENDLOOP.
      ENDIF.                               "org.unit check needed ?
    end-of-selection.
      sort h_objec by otype objid.
      sort list_output by otype sobid.
      sort h_persons by ttype tobid.
    ALV-Liste aufbauen
      loop at h_objec.
        loop at h_persons where otype = h_objec-otype     "XSC
                          and   sobid = h_objec-objid.    "XSC
          Read table list_output with key
                                 otype = h_persons-ttype
                                 sobid = h_persons-tobid
                                 binary search.
          if sy-subrc = 0.
            h_tabix1 = sy-tabix.
            while sy-subrc = 0.
              clear alv_output.                            "XSC
              ALV_OUTPUT-otype    = h_objec-otype.
              ALV_OUTPUT-sobid    = h_objec-objid.
              ALV_OUTPUT-stext    = h_objec-stext.
              ALV_OUTPUT-Ptype    = LIST_OUTPUT-otype.
              ALV_OUTPUT-pobid    = LIST_OUTPUT-sobid.
              ALV_OUTPUT-pshort   = LIST_OUTPUT-short.
              ALV_OUTPUT-ptext    = LIST_OUTPUT-stext.
              ALV_OUTPUT-qualid   = LIST_OUTPUT-qualid.
              ALV_OUTPUT-qualstxt = LIST_OUTPUT-qualstxt.
              ALV_OUTPUT-expbegda = LIST_OUTPUT-vbegda.
              ALV_OUTPUT-expendda = LIST_OUTPUT-vendda.
          PERFORM FIND_TRAINING TABLES QUALI_TAB EVENT_TAB COLLECTED_EVENTS
                    USING $PLVAR $GDATE H_EVENTS H_QUAL.
              IF NOT EVENT_TAB[] IS INITIAL.
                READ TABLE COLLECTED_EVENTS WITH KEY
                                     QUALID = LIST_OUTPUT-QUALID.
                IF SY-SUBRC = 0.
                  ALV_OUTPUT-ICON_S_EVENTS = ICON_BOOKEVENT.
                endif.
              ENDIF.
              Append ALV_OUTPUT.
              h_tabix1 = h_tabix1 + 1.
              READ TABLE list_output INDEX h_tabix1
                         COMPARING otype sobid.
            endwhile.
          endif.
        endloop.
      endloop.
    check if indicator for qualification view is set
      IF h_qual = 'X'.                                          "note 956731
        SORT alv_output by qualid OTYPE SOBID ptype pobid       "note 956731
        expbegda expendda.                                      "note 956731
      ELSE.                                                     "note 956731
        SORT alv_output by OTYPE SOBID ptype pobid qualid expbegda expendda.
      ENDIF.                                                    "note 956731
      DELETE ADJACENT DUPLICATES FROM ALV_OUTPUT COMPARING OTYPE SOBID ptype
        pobid qualid expbegda expendda.
    stext_AQ und icon-Feld noch nicht gefüllt
        perform PREPARE_TOP_OF_LIST.
        perform Build_FIELDCAT using GT_FIELDCAT[] H_EVENTS.
        perform ALV_LAYOUT USING alv_layout.
        G_REPID          = SY-REPID.
        G_VARIANT-REPORT = G_REPID.
        PERFORM EVENTTAB_BUILD USING GT_EVENTS.
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
            EXPORTING
        I_INTERFACE_CHECK        = 'X'
            I_CALLBACK_PROGRAM       = G_REPID
        I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
            I_CALLBACK_USER_COMMAND  = ALV_USERCOMMAND
            I_STRUCTURE_NAME         = 'HRPDV_EXPIRED_Q'
            IS_LAYOUT                = ALV_LAYOUT
            IT_FIELDCAT              = GT_FIELDCAT[]
        IT_EXCLUDING             =
        IT_SPECIAL_GROUPS        =
        IT_SORT                  =
        IT_FILTER                =
        IS_SEL_HIDE              =
            I_DEFAULT                = 'X'
            I_SAVE                   = 'A'
            IS_VARIANT               = G_VARIANT
            IT_EVENTS                = GT_EVENTS
        IT_EVENT_EXIT            =
        IS_PRINT                 =
        IS_REPREP_ID             =
        I_SCREEN_START_COLUMN    = 0
        I_SCREEN_START_LINE      = 0
        I_SCREEN_END_COLUMN      = 0
        I_SCREEN_END_LINE        = 0
        IMPORTING
          E_EXIT_CAUSED_BY_CALLER  =
          ES_EXIT_CAUSED_BY_USER   =
          TABLES
            T_OUTTAB                 = ALV_OUTPUT
          EXCEPTIONS
              PROGRAM_ERROR            = 1
              OTHERS                   = 2  .
        IF SY-SUBRC <> 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
    *&      Form  FIND_TRAINING
          text
         -->P_QUALI_TAB  text
         -->P_EVENT_TAB  text
         -->P_$PLVAR  text
         -->P_GDATE  text
         -->P_H_EVENT  text
         -->P_H_QUAL  text
    FORM FIND_TRAINING TABLES  P_QUALI_TAB STRUCTURE QUALI_TAB
                               P_EVENT_TAB STRUCTURE EVENT_TAB
                               P_COLLECTED_EVENTS STRUCTURE COLLECTED_EVENTS
                       USING   VALUE(P_$PLVAR) LIKE P1000-PLVAR
                               VALUE(P_GDATE) LIKE P1000-GDATE
                               VALUE(P_H_EVENT) TYPE ANY
                               VALUE(P_H_QUAL) TYPE ANY.
      IF NOT P_H_EVENT IS INITIAL.
        READ TABLE EVENT_TAB INDEX 1 TRANSPORTING NO FIELDS.
        IF SY-SUBRC <> 0.
          CLEAR P_EVENT_TAB. REFRESH EVENT_TAB.
          CLEAR P_COLLECTED_EVENTS. REFRESH P_COLLECTED_EVENTS.
          IF EVENT = FALSE.
            EVENT = TRUE.
          ELSE.
            EVENT = FALSE.
          ENDIF.
          CALL FUNCTION 'RHPH_FIND_TRAINING_FOR_QUAL'
               EXPORTING
                    PLVAR            = PCHPLVAR
                    GDATE            = SY-DATUM
                  GET_NAME         = 'X'
               TABLES
                    QUALI_TAB        = QUALI_TAB
                    TO_Q_TAB         = EVENT_TAB
              EXCEPTIONS
                   NO_QUALIFICATION = 1
                   NO_OBJECT_FOUND  = 2
                   TECHNICAL_ERROR  = 3
                   OTHERS           = 4.
          IF SY-SUBRC = 0.
    the found qualifications are picked up into table event_tab
          ENDIF.
          IF SY-SUBRC = 1.
            MESSAGE S015.   "Zu den Eingaben wurden keine Daten gefunden
          ENDIF.
          IF SY-SUBRC > 2.
            EXIT.
          ENDIF.
    collect events when there are double.
    Veranstaltungen kollektieren, Können mehrfach auftauchen, da
    verschiedenen Qualifikationen von gleichen Veranstaltungen vermittelt
          LOOP AT P_EVENT_TAB INTO P_COLLECTED_EVENTS.
            APPEND P_COLLECTED_EVENTS.
          ENDLOOP.
          SORT P_COLLECTED_EVENTS BY QUALID STEXT.
        ENDIF.
      ENDIF.
    ENDFORM.                               " FIND_TRAINING
    *&      Form  PREPARE_TOP_OF_LIST
          text
    -->  p1        text
    <--  p2        text
    FORM PREPARE_TOP_OF_LIST.
      DATA ALV_TOP_OF_LIST TYPE SLIS_LISTHEADER.  "typ, key, info
      DATA STEXT LIKE HRPDV_SUCCESSOR_VIEW-TTEXT.
      DATA P_SUBRC LIKE SY-SUBRC.
      DATA P_STEXT LIKE T777O-OTEXT.
      DATA l_tabix like sy-tabix value 0.
      DATA: h_counter TYPE i.                             "note 730486
      ALV_TOP_OF_LIST-TYP = 'H'.
      ALV_TOP_OF_LIST-INFO = TEXT-REQ.
      APPEND ALV_TOP_OF_LIST TO GT_ALV_LIST_TOP_OF_LIST.
    Organisationseinheit
      ALV_TOP_OF_LIST-typ = 'S'.
    Read text for organisationunit
      PERFORM READ_TEXT_OTYPE_T777O(SAPLRHP0) USING SY-LANGU $ORGEH
                                                    P_STEXT P_SUBRC.
      ALV_TOP_OF_LIST-key = P_STEXT.
    fill buffer for read organisation-text
      CALL FUNCTION 'RH_TEXT_BUFFER_FILL'
         EXPORTING
              CHECK_STRU_AUTH = 'X'
              WITH_EXTINT     = ' '
           TABLES
                OBJECTS         = OBJECTS.
    loop at objects for multipleselection
      clear h_counter.                          "note 730486
      LOOP AT OBJECTS.
        $OBJID = OBJECTS-SOBID.
        CALL FUNCTION 'RH_READ_OBJECT'
             EXPORTING
                PLVAR           = OBJECTS-PLVAR
                OTYPE           = OBJECTS-OTYPE
                OBJID           = $OBJID
             IMPORTING
              SHORT           = short
                STEXT           = STEXT
             EXCEPTIONS
                NOT_FOUND       = 1
                OTHERS          = 2.
        IF SY-SUBRC <> 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
        IF h_counter >= 15.                               "note 730486
          MOVE '( ... )' TO ALV_TOP_OF_LIST-INFO.         "note 730486
          APPEND ALV_TOP_OF_LIST TO gt_alv_list_top_of_list.
          "note 730486
          EXIT.                                           "note 730486
        ENDIF.                                            "note 730486
        CONCATENATE $ORGEH OBJECTS-SOBID STEXT INTO
        ALV_TOP_OF_LIST-INFO SEPARATED BY SPACE.
        APPEND ALV_TOP_OF_LIST TO GT_ALV_LIST_TOP_OF_LIST.
        CLEAR ALV_TOP_OF_LIST.
        ALV_TOP_OF_LIST-typ = 'S'.
        l_tabix = l_tabix + 1.
        ADD 1 TO h_counter.                         "note 730486
      ENDLOOP.
    CLEAR ALV_TOP_OF_LIST.
      ALV_TOP_OF_LIST-TYP  = 'S'.
      ALV_TOP_OF_LIST-key = TEXT-003.
      WRITE PCHBEGDA TO ALV_TOP_OF_LIST-INFO.
      APPEND ALV_TOP_OF_LIST TO GT_ALV_LIST_TOP_OF_LIST.
      clear ALV_TOP_OF_LIST-INFO.
      ALV_TOP_OF_LIST-key = TEXT-004.
      WRITE PCHENDDA TO ALV_TOP_OF_LIST-INFO.
      Append ALV_TOP_OF_LIST TO GT_ALV_LIST_TOP_OF_LIST.
    ENDFORM.                               " PREPARE_TOP_OF_LIST
    *&      Form  BUILD_FIELDCAT
          text
         -->P_GT_FIELDCAT[]  text
    FORM BUILD_FIELDCAT USING  P_GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV
                               P_H_EVENTS.
      DATA: WA_FIELDCAT LIKE LINE OF P_GT_FIELDCAT.
      DATA: P_REPNAME LIKE SY-REPID,
            L_TABIX LIKE SY-TABIX.         "local variable for sy-tabix.
      P_REPNAME = SY-REPID.
    Erstellen des Feldkataloges
      CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
         EXPORTING
               I_PROGRAM_NAME         = P_REPNAME
               I_INTERNAL_TABNAME     =
               I_STRUCTURE_NAME       = 'HRPDV_EXPIRED_Q'
               I_CLIENT_NEVER_DISPLAY = 'X'
               I_INCLNAME             = PRONAME
         CHANGING
               CT_FIELDCAT            = P_GT_FIELDCAT
         EXCEPTIONS
               INCONSISTENT_INTERFACE = 0
               PROGRAM_ERROR          = 0
               OTHERS                 = 0.
      LOOP AT P_GT_FIELDCAT INTO WA_FIELDCAT.
        l_tabix = sy-tabix.
        CASE WA_FIELDCAT-FIELDNAME.
          when 'OTYPE'.
            WA_FIELDCAT-DDICTXT = 'L'.
          when 'SOBID'.
            WA_FIELDCAT-DDICTXT = 'L'.
          WHEN 'STEXT'.
            WA_FIELDCAT-DDICTXT = 'L'.
          when 'PTYPE'.
            WA_FIELDCAT-DDICTXT = 'L'.
          when 'POBID'.
            WA_FIELDCAT-DDICTXT = 'L'.
          when 'PSHORT'.
            WA_FIELDCAT-DDICTXT = 'L'.
          WHEN 'PTEXT'.
            WA_FIELDCAT-DDICTXT = 'L'.
          WHEN 'QUALID'.
            WA_FIELDCAT-DDICTXT = 'L'.
          WHEN 'QUALSTXT'.
            WA_FIELDCAT-DDICTXT = 'L'.
          WHEN 'EXPBEGDA'.
            WA_FIELDCAT-DDICTXT = 'L'.
          WHEN 'EXPENDDA'.
            WA_FIELDCAT-DDICTXT = 'L'.
          WHEN 'ICON_S_EVENTS'.
            IF P_H_EVENTS IS INITIAL.
              WA_FIELDCAT-NO_OUT = 'X'.
            else.
              WA_FIELDCAT-DDICTXT = 'X'.
            endif.
        ENDCASE.
        MODIFY P_GT_FIELDCAT FROM WA_FIELDCAT INDEX l_tabix.
      ENDLOOP.
    ENDFORM.                               " BUILD_FIELDCAT
    *&      Form  ALV_LAYOUT
          text
         -->P_L_ALV_LAYOUT  text
    FORM ALV_LAYOUT USING    P_ALV_LAYOUT  TYPE slis_layout_alv.
    build layout
    P_LAYOUT-BOX_FIELDNAME = 'MARK_X'.   "fieldname for checkbox
      P_ALV_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
      P_ALV_LAYOUT-BOX_TABNAME   =  ALV_OUTPUT.   "tabname for checkbox
      p_ALV_layout-info_fieldname = 'ALV_COLOR'.
    ENDFORM.                               " ALV_LAYOUT
    FORM eventtab_build USING
    FORM EVENTTAB_BUILD USING RT_EVENTS TYPE SLIS_T_EVENT.
      DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
      MOVE 'TOP_OF_PAGE' TO LS_EVENT-NAME.
      MOVE 'TOP_OF_PAGE' TO LS_EVENT-FORM.
      APPEND LS_EVENT TO RT_EVENTS.
    ENDFORM.                    "EVENTTAB_BUILD
    *FORM TOP_OF_PAGE
    FORM TOP_OF_PAGE.                                           "#EC CALLED
      NEW-PAGE.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          IT_LIST_COMMENTARY = GT_ALV_LIST_TOP_OF_LIST[].
    ENDFORM.                    "TOP_OF_PAGE
          FORM USER_COMMAND                                             *
    USER_COMMAND for the list of successor view                         *
    -->  r_ucomm                                                       *
    -->  rs_selfield                                                   *
    FORM USER_COMMAND USING ALV_UCOMM LIKE SY-UCOMM
          RS_SELFIELD TYPE SLIS_SELFIELD.                       "#EC CALLED
      DATA: SELECTED_LINE LIKE HRPDV_expired_q.
      DATA: SOBID_QUA LIKE P1000-OBJID.
      DATA: LT_PERS_TAB LIKE HRSOBID OCCURS 0 WITH HEADER LINE.
      CASE ALV_UCOMM.
        WHEN '&IC1'.                       "per Doppelklick auswählen
          READ TABLE ALV_OUTPUT INDEX
          RS_SELFIELD-TABINDEX INTO SELECTED_LINE.
          CASE RS_SELFIELD-FIELDNAME.
            WHEN 'POTYPE' or 'POBID' or 'PTEXT' or 'OTYPE' or 'SOBID' or
    'STEXT' or 'QUALID' or 'QUALSTXT' or 'EXPBEGDA' or 'EXPENDDA'.
              READ TABLE ALV_OUTPUT INDEX RS_SELFIELD-TABINDEX INTO
                    Help_output.
              IF SY-SUBRC <> 0.
                MESSAGE S027.               "Bitte gültige Zeile auswählen
                EXIT.
              Endif.
         IF ALV_OUTPUT-SOBID IS INITIAL.
           MESSAGE S015.  "Zu den Eingaben wurden keine Daten gefunden
         ELSE.
         converte the variable because of the different types
         SOBID_QUA = SELECTED_LINE-SOBID_QUA.
              CALL FUNCTION 'RHPP_SHOW_PROFILE'
                EXPORTING
                  PLVAR        = pchplvar
                  OTYPE        = SELECTED_LINE-PTYPE       "XSC
                  OBJID        = SELECTED_LINE-POBID       "XSC
                  BEGDA        = PCHBEGDA
                  ENDDA        = PCHENDDA
                  MAINTAIN     = ' '
                EXCEPTIONS
                  NO_AUTHORITY = 1
                  NOT_FOUND    = 2
                  OTHERS       = 3.
              CASE SY-SUBRC.
                WHEN 0.
                All right.
                WHEN 1.
                  MESSAGE S015.
                Zu Ihren Eingaben konnten keine Daten gefunden werden!
                WHEN 2.
                  MESSAGE E000.
                Dazu haben sie keine berechtigung!
                WHEN OTHERS.
                  MESSAGE E008.
                Es ist ein unvorhergesehener Fehler aufgetreten.
              ENDCASE.                     "sy-subrc.
              CLEAR ALV_OUTPUT.
       ENDIF.    "IF ALV_OUTPUT-SOBID IS INITIAL.
       CLEAR ALV_OUTPUT-SOBID.
            when 'ICON_S_EVENTS'.
              IF SELECTED_LINE-ICON_S_EVENTS IS INITIAL.
                MESSAGE S027.              "Bitte gültige Zeile auswählen
                EXIT.
              ENDIF.
              CLEAR LT_PERS_TAB.
              REFRESH LT_PERS_TAB.
              LT_PERS_TAB-PLVAR = pchPLVAR.
              LT_PERS_TAB-OTYPE = SELECTED_LINE-PTYPE.          "XSC
              LT_PERS_TAB-SOBID = SELECTED_LINE-POBID.          "XSC
              APPEND LT_PERS_TAB.
              SOBID_QUA = SELECTED_LINE-QUALID.
              CALL FUNCTION 'RHPP_SHOW_SUGGEST_EVENTS'
              EXPORTING
                P_PLVAR      = pchPLVAR
                P_SOBID_QUA  = SOBID_QUA
              P_PROFCY_REQ = SELECTED_LINE-RATING_REQ
                P_GDATE      = sy-datum
              TABLES
              EVENT_TAB    =
                PERS_TAB     = LT_PERS_TAB.
          endcase.
          CLEAR SELECTED_LINE.
      ENDCASE.                             "case sy-ucomm
    CLEAR SY-UCOMM.
    ENDFORM.                    "USER_COMMAND

    Pls be more specific in your question. If you want to include an extra field in your alv output, then read the field catalog table you created through "Reuse_alv_fieldcatalog_merge" and then add an extra entry in it giving the details of the field you want to add.. and then call the "resuse_alv_grid_display",
    Hope this helps. To be able to help you in a better way, kindly revert with any specific issue.
    Reward if helpful,
    Karan

  • Can u tell me where I get a good material on ABAP-HR?

    Hi Everybody,
    I am a fresher.I got my project on ABAP-HR.I don't know anything about it.plz tell me where can i get good material on ABAP-HR.
    thanks&regards
    saydulu.kolasani

    SAP HR
    http://www.sapdevelopment.co.uk/hr/hrhome.htm
    http://www.sap-basis-abap.com/saphr.htm
    http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?track=NL-142&ad=500911#Transactions
    http://help.sap.com/saphelp_47x200/helpdata/en/4f/d5275f575e11d189270000e8322f96/content.htm
    http://www.sap-basis-abap.com/saphr.htm
    http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?track=NL-142&ad=500911#Transactions
    http://help.sap.com/saphelp_47x200/helpdata/en/4f/d5275f575e11d189270000e8322f96/content.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/4f/d5275f575e11d189270000e8322f96/content.htm
    http://www.saptips.com/Previews/SAPtipsAugust-September2004TableOfContents.pdf
    http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?track=NL-142&ad=500911#Transactions
    http://help.sap.com/saphelp_46c/helpdata/en/4f/d528be575e11d189270000e8322f96/frameset.htm.
    http://www.sap-basis-abap.com/saphr.htm.
    http://www.sapgenie.com/faq/hr.htm
    http://www.sap-img.com/human/hr-faq.htm
    http://www.sapdevelopment.co.uk/hr/hrhome.htm
    http://www.sapgenie.com/mysap/mysap_hr.htm
    Re: remunaration statement
    HR ABAP
    /message/1033820#1033820 [original link is broken]
    Please award points if in case found helpful

  • Plz can someone tell me where can I define the material type?

    Hi All,
    I want to create a new group of material, there is a material type should be specified. I want to use my own. plz can someone tell me where can i define it?
    thanks and regards,
    samson

    Hi Samson,
    U can create a new material type using the tcode OMS2 and then copy the material type which u need to modify and then define the name of the new material type and make the required changes which u want for that material type and save it.
    Hope it wud have answered ur question
    reward if useful
    Shawn

  • I cant use app store, because i brought it at Canada but right now i m living china. plz tell me how to fix it

    i cant use app store, because i brought it at Canada but right now i m living china. plz tell me how to fix it

    Get a charge card from a Chinese bank with a local billing address. Create a new iTunes account with a new Apple ID using your Chinese charge card and billing address.

  • Plz tell me which sound file format uses minimum memory of a director file

    plz tell me which sound file format uses minimum memory of a director file. bcoz on adding sound the projector file becomes a large memory file .
    so i am confused that which file format should be used.

    saramultimedia,
    Are you certain that you're asking your question in the right place? This forum is about the Adobe Media Encoder application. Most of the people who answer questions here are familiar with the digital video and audio applications such as After Effects and Premiere Pro.
    If you have a question about Director, it's probably best to ask on the Director forum. But I see that you already know that, since you already have a thread on that forum to ask this question, and it got an answer:
    http://forums.adobe.com/thread/769569

  • Okay so my iphone says its connected to the internet but the internet only works for games so i cant use things like facebook twitter or youtube PLZ TELL ME HOW TO FIX THISf

    Okay so my iphone says its connected to the internet but the internet only works for games so i cant use things like facebook twitter or youtube PLZ TELL ME HOW TO FIX THISf by the way it an iphone 4s and i have never encountered this problem before my dads iphone is the same after we updated to ios 8.1.1 but my mum hasnt updated yet and hers is fine

    If deleting then reinstalling the apps doesn't work, then contact the app developer for support.
    It sounds, though, like your internet connection is simply very slow.
    Try making a backup, then restoring the iPhone as new, and testing again.

  • Can anyone tell me where i can get a new or used sony super drive dwu10 678-0429b in the UK, for my flat panel i mac g4  model no m9168lla , or  is there  any other compatable drives i could fit

    can anyone tell me where i can get a new or used sony super drive dwu10 678-0429b in the UK, for my flat panel i mac g4  model no m9168lla , or  is there  any other compatable drives i could fit

    Try eBay. You do occasionally see that old model advertised there.

  • I am an iphon 4 isd....my phone is demo version..plz tell me how to unlock it to use it as like normal iphone 4

    i am an iphon 4 isd....my phone is demo version..plz tell me how to unlock it to use it as like normal iphone 4
    <Edited by Host>

    What do you mean by demo version? 
    In order to provide assistance, we need clear and precise details of the issue/problem you are experiencing.

  • I am using Firefox v6.0.2 and there is no "Add a Device" area!!! Can someone PLEASE tell me where to go to find this???

    Again, I am trying to sync all my desktop data over to my laptop. However, using Firefox v6.0.2 on both, I cannot find the "Add a Device" anywhere in the sync process windows. Can someone please tell me where I can find it???

    Do you already have created a Sync account?
    You need to create a sync account one one computer (click Create ...) and click the Connect button on the other computer.
    *Firefox/Tools > Set Up Sync
    * https://support.mozilla.com/kb/How+to+sync+Firefox+settings+between+computers
    * https://support.mozilla.com/kb/where-can-i-find-my-firefox-sync-key
    * https://support.mozilla.com/kb/find-code-to-add-device-to-firefox-sync

  • I create an id. on review option when i enter visa card and security code, it always gives an error msg "Invalid Secruity code". but i use this code for money withdraw from ATM and for shopping also. plz tell the solution ????

    i create an id. on review option when i enter visa card and security code, it always gives an error msg "Invalid Secruity code". but i use this code for money withdraw from ATM and for shopping also. plz tell the solution ????

    The code they are asking for is the last three digits of the number on the back of the card (you don't use this when using an ATM or presenting the card in shops).

Maybe you are looking for