Plz tell this ans

in reports i have 75 records if i want to display 10 records in each page so top-or-page & end-of-page how many times triggers plz tell me
Thank you
Rajesh.M

hi,
why don't u use alv concept. it will be more useful to you .
if u wanna display 75 records and moreover,i think u dont need to display all the 75 fields at a single time as u can use the filter for it.
i am sending u the link frmo where u can have know ledge for starting dis concept.
http://www.****************/Tutorials/ALV/ALVMainPage.htm
if u want help more in making the report do send me ur requierment .
plzz do give points,if u find it useful d above link.

Similar Messages

I create an id. on review option when i enter visa card and security code, it always gives an error msg "Invalid Secruity code". but i use this code for money withdraw from ATM and for shopping also. plz tell the solution ????

i create an id. on review option when i enter visa card and security code, it always gives an error msg "Invalid Secruity code". but i use this code for money withdraw from ATM and for shopping also. plz tell the solution ????

The code they are asking for is the last three digits of the number on the back of the card (you don't use this when using an ATM or presenting the card in shops).

I think Barry Hemphill said he could SELECTIVELY delete SEVERAL iPad browser history entries at once. I can,t find his email. Someone plz tell me how or fwd this to Barry. Thnx

I think Barry Hemphill said he could SELECTIVELY delete SEVERAL iPad browser history entries at once. I can,t find his email. Someone plz tell me how or fwd this to Barry. Thnx

Hello milkisoo,
Wow! Purchasing a new computer and monitor should be a fun and exciting experience, and instead, it sounds like it’s turned into a complete nightmare. I can only imagine your disappointment when you found two charges relating to its purchase on your debit card account, and I’m sorry for any aggravation this caused.
As I want to provide you some piece of mind, I pulled up your order number using your email address attached to the forum. After review of its payment information, I found we collected only one payment. However, when orders are first placed on BestBuy.com, a pending authorization should show up on your bank card to make sure funds are available for the order until it is fulfilled. From there, the authorization should drop off and the collection charge should appear. This is the case for your one charge of $1,051.69.
It also sounds like an error may have occurred when you initially attempted to place your order, resulting in one of your gift cards not registering properly and the order not being completed. Your card’s issuing bank doesn’t appear to have recognized this and pushed through the pending authorization. This occurred a second time when your account information didn’t quite match up with what we had on file. Please know that we haven’t ordered a collection of these funds and your issuing bank should release the two pending authorizations within 5 to 7 business days.
Thank you for posting.
Alex|Social Media Specialist | Best Buy® Corporate
Private Message

I have ipad3 i want to stop downloading the update software from iOS5 to 6 plz tell me how show i stop this downloading

i have ipad3 i want to stop downloading the update software from iOS5 to 6 plz tell me how show i stop this downloading

This happened to me. I went to settings - reset - reset all settings and it STOPPED!

I have i phone 5 problems is when my phone battery left 20% then phone automatic shutter down plz tell me solution for this

i have i phone 5 problems is when my phone battery left 20% then phone automatic shutter down plz tell me solution for this

It seems like if you have a calibration issue with your battery percentage indicator.
To recalibrate the indicator, charge your battery to 100% then let it drain completely until the iPhone shuts down then charge it to 100% again and do not disturb it until it reaches 100%. This will reclaibrate your battery indicator.

TS1398 till 2 days back I was able to use facetime but now I can call through facetime and ring is also there but the thing is while connecting it is showing FACETIME FAILED..plz tell me a solution for this

till 2 days back I was able to use facetime but now I can call through facetime and ring is also there but the thing is while connecting it is showing FACETIME FAILED..plz tell me a solution for this

you have a ps cs4 license for mac and you have some way of finding your serial number.
if yes, download an install the installation file. if you already have the installation file, what is its name and file extension? (eg, if it's one file, it should be a dmg file.)
if you need the installation file,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Plz tell me difference

hi all
thanks
plz tell me difference between sy-index,sy-tabix
and sy-dbcnt ect.
or any other feilds like above
plz tell detail which r usefull me
for programming
thanks
anand

Hi,
SYSTEM VARIABLES:
These are predefined variables defined by SAP. Each system variable starts with the naming convention SY-____. SYST is the name of a structure which holds predefined system variables.
Some of the predefined system variables we commonly use in programming are:
SY-UZEIT
SY-DATUM
SY-SUBRC
SY-INDEX
SY-TABIX
SY-TFILL
SY-ULINE
SY-VLINE
SY-LISEL
SY-LILLI
SY-LSIND
SY-PAGNO
SY-DYNNR
PRINTING DATE AND TIME USING SYSTEM VARIABLES:
Eg. code
DATA DAT LIKE SY-DATUM VALUE '20070720'.
WRITE DAT .
DATA TIM LIKE SY-UZEIT VALUE '062015'.
WRITE TIM.
PRINT HORIZONTAL AND VERTICAL LINES IN LPS:
SY-ULINE - This system variable is used to print horizontal line in LPS (List Processing Screen).
SY-VLINE - This system variable is used to print vertical line in LPS.
Eg. code
WRITE 'THIS IS AN EXECUTABLE PROGRAM'.
WRITE :/ 'THIS IS FIRST LINE OF THE PROGRAM'.
WRITE :/10(40) SY-ULINE.
WRITE :/ 'THIS IS LAST LINE OF THE PROGRAM'.
In the above code, WRITE :/10(40) SY-ULINE, this statement is used to print the horizontal line with position specifiers where,
10 specifies the starting position of horizontal line and
(40) specifies the length of the line in the form of character spaces.
Eg. code to draw vertical lines:
do 5 times.
write :/10 sy-vline.
enddo.
By default, a vertical lines takes one single line to draw. We cannot specify length for the vertical line.
ADDING COLOR TO THE OUTPUT IN LPS:
ABAP follows VIBGYOR format for specifying colors in LPS screen. We can define a number for each color starting from 1 - 7.
SYNTAX:
WRITE <variable_name> COLOR <color_id>.
eg. code:
DATA KARTHIK(10) VALUE 'CHENNAI'.
WRITE KARTHIK COLOR 1.
INCLUDE PROGRAMS:
These are type I programs in SAP. These are one of the repository objects. These programs are used to store a piece of code. We can call the Include program from Executable program using INCLUDE statement.
Eg. code in Include program:
*& Include ZINCLUDEPROGRAM * Autogenerated code
DATA A TYPE I VALUE '20'.
WRITE A.
Save -> Activate.
To invoke the above include program, specify following code in Executable Program:
REPORT ZEXECUTABLEPROGRAM . * Autogenerated Code
INCLUDE ZINCLUDEPROGRAM.
Save -> Activate -> Execute.
SUBMIT STATEMENT:
This statement is used to invoke only the output of the specified program.
eg. code:
REPORT ZNEWEXECUTABLEPROGRAM . * Autogenerated code
SUBMIT ZEXECUTABLEPROGRAM.
Save -> Activate.
ADDING INDEXES TO VALUES IN LPS:
Eg. code:
DO 5 TIMES.
WRITE :/ SY-INDEX COLOR 1, 'THIS IS ABAP IN SAP' COLOR 2.
IF SY-INDEX = 3.
EXIT.
ENDIF.
ENDDO.
SY-INDEX is the system variable used to specify index value in LPS.
EXIT is the control break statement used to break and exit the loop.
Regards,
Priya.

I wnat to add new fieldtext in the alv list output plz tell me

hi,
i whant add new fieldtext in the list output, plz tell me where can i modify it.
CORRECTIONS
DATE       CORRECTION NOTE    AUTHOR DESCRIPTION
09.03.2001 L9CK045451 0388404 XSC    Wrong list output for multiple Os
05.06.2001 AL0K023393 0410219 Lud    Wrong keydate for search with
                                     Pchbegda and pchendda.
22.04.2004 S6BK024775 730486 PS     Too many selection parameters in
                                     header
19.06.2006 S6BK035494 956731 JF     No sorting by qualification
REPORT RHPK_FIND_PERS_WITH_EXPIRED_QU MESSAGE-ID PQ.
DATA AUFRUF(8).
TABLES : OBJEC, GDSET.
DATA LIST.
DATA MARKFIELD(1) TYPE C.
ALV_POOL
TYPE-POOLS SLIS.
INCLUDES
INCLUDE .
INCLUDE RHPEINI0.
TABLES
DATA: orgeh_BUFFER like hrobject OCCURS 1 WITH HEADER LINE.
DATA: OBJECTS    LIKE HRSOBID    OCCURS 1 WITH HEADER LINE.
DATA: h_OBJEC    LIKE objec    OCCURS 0 WITH HEADER LINE.
DATA: pers_objects LIKE HRSOBID    OCCURS 1 WITH HEADER LINE.
DATA: QUALI_TAB LIKE QUALI_PROF OCCURS 1 WITH HEADER LINE.
DATA: PERSONS LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
DATA: H_PERSONS LIKE HRPE_PROFL OCCURS 1 WITH HEADER LINE.
DATA: LIST_OUTPUT LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
DATA: BOOK_EVENT_TAB LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
DATA: PLAN_EVENT_TAB LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
DATA H_SUITED LIKE DYNP_PCRIT-SUITED.
DATA: O_COLOR LIKE STREEATTR-COLOR.
DATA: O_INTENSIV LIKE STREEATTR-INTENSIV.
DATA SHOW_KEY.
DATA EVENT.
DATA: HTEXT LIKE P1000-STEXT.
DATA: EVENT_TAB LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
DATA: COLLECTED_EVENTS LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
DATA: SUBTY_TAB LIKE HRPE_OTYPE_SUBTY OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF HIDE_STRU,
        PERSTYPE LIKE HROTYPE-OTYPE,
        PERSOBID LIKE HRSOBID-SOBID,
        PERSTXT LIKE PERSQ_PROF-STEXT,
        SCALE_ID LIKE HRPE_PROFQ-SCALE_ID,
        TRAININGTYPE LIKE HRP1000-OTYPE,
        TRAININGID   LIKE HRP1000-OBJID,
        TRAININGSTXT LIKE HRP1000-STEXT,
        QUALID LIKE QUALI_PROF-QUALID,
        QUALTEXT LIKE QUALI_PROF-QUALSTXT,
      END OF HIDE_STRU.
DATA: BEGIN OF EXTAB OCCURS 10,
         FCODE LIKE RSMPE-FUNC,
      END OF EXTAB.
DATA: CURRENT_QUALID LIKE QUALI_PROF-QUALID.
DATA: CURRENT_TRAININGSID LIKE HRP1000-OBJID.
DATA: CURRENT_TRAININGTYPE LIKE HRP1000-OTYPE.
DATA: SUBRC LIKE SY-SUBRC.
VARIABLES
DATA: OBJID LIKE P1000-OBJID.
DATA: H_LINE_COUNT TYPE I.
DATA: H_TABIX1 LIKE SY-TABIX.
ALV-Variables
DATA: alv_events_line    TYPE slis_alv_event.         "header line
DATA ALV_EVENTS TYPE SLIS_T_EVENT.
DATA GT_ALV_LIST_TOP_OF_LIST TYPE SLIS_T_LISTHEADER.
DATA: gt_events TYPE SLIS_T_EVENT.
DATA G_REPID LIKE SY-REPID.
DATA G_VARIANT LIKE DISVARIANT.
DATA ALV_USERCOMMAND TYPE SLIS_FORMNAME VALUE 'USER_COMMAND'.
DATA G_USERCOMMAND_FOR_RANKINGLIST TYPE SLIS_FORMNAME VALUE
'USER_COMMAND_FOR_RANKINGLIST'.
DATA ALV_LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA: GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: ALV_OUTPUT LIKE HRPDV_EXPIRED_Q OCCURS 0 WITH HEADER LINE.
DATA: Help_OUTPUT LIKE HRPDV_EXPIRED_Q OCCURS 0 WITH HEADER LINE.
begin of Dynpro 5020 - POPUP: WEITER
DATA: OK_CODE_5020   LIKE SY-UCOMM.
DATA: NO_ORG.                          "if no org selected
DATA: H_TABIX LIKE SY-TABIX.
begin of Dynpro 20nn - Header
TABLES: DYNP_RHPP.
SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-005.
PARAMETERS:
   H_EVENTS LIKE DYNP_RHPP-GEN_TRAIN, "with training sugg
   H_QUAL   LIKE DYNP_RHPP-EXPIRED_QUAL. "with Qual
SELECTION-SCREEN END OF BLOCK B3.
INITIALIZATION
INITIALIZATION.
PERFORM READ_T77S0_PARAMETERS_FOR_PE.
get user parameters/Planvariante und Beginndatum setzen:
PCHOTYPE = $ORGEH.
CALL FUNCTION 'RHP0_USER_PARAMETERS_GET'
       EXPORTING
            FILL_IF_INITIAL = 'X'
       IMPORTING
            PLVAR           = PCHPLVAR
            BEGDA           = PCHBEGDA
            endda           = Pchendda    "Correction 0410219
            WITH_KEY        = SHOW_KEY
          SUBSTITUTE      =
          ESSENTIAL       = only_essential
            ORG_UNIT        = PCHOBJID-LOW
      EXCEPTIONS
            OTHERS     = 0.
PCHBEGDA = LOW_DATE.   "Correction note: 0410219 / AL0K023393
get menu text for key on/off
PERFORM USER_MENU_TEXT_KEY(SAPLRHP0) USING G_MENU_TEXT_KEY.
start-of-selection
START-OF-SELECTION.
terminate the selection if objid isn't given
READ TABLE PCHOBJID INDEX 1 TRANSPORTING NO FIELDS.
IF SY-SUBRC <> 0
AND PCHOBJID IS INITIAL.
    PCHOBJID-SIGN   = 'I'.
    PCHOBJID-OPTION = 'EQ'.
    PCHOBJID-LOW    = '00000001'.
    APPEND PCHOBJID.
    NO_ORG = TRUE.
ELSE.
    NO_ORG = FALSE.
ENDIF.
GET OBJEC.
terminate the selection if objid isn't given
IF NO_ORG = TRUE.
    EXIT.
ENDIF.
OBJECTS-PLVAR = PCHPLVAR.
OBJECTS-OTYPE = PCHOTYPE.
OBJECTS-SOBID = OBJEC-REALO.
APPEND OBJECTS.
Für das lesen der Organisationseinheit
h_OBJEC-PLVAR = OBJEC-PLVAR.
h_OBJEC-OTYPE = OBJEC-OTYPE.
h_OBJEC-OBJID = OBJEC-objid.
append h_objec.
Read table h_objec index 1 transporting no fields.
if sy-subrc = 0.
Fill Buffer
    orgeh_BUFFER = h_OBJEC.
    orgeh_BUFFER[] = h_OBJEC[].
    CALL FUNCTION 'RH_TEXT_BUFFER_FILL'
      TABLES
        OBJECTS = orgeh_BUFFER.
    Loop at h_OBJEC.
      H_TABIX = SY-TABIX.
Read text of organisation
      CALL FUNCTION 'RH_READ_OBJECT'
           EXPORTING
                PLVAR     = h_OBJEC-plvar
                OTYPE     = h_OBJEC-otype
                OBJID     = h_OBJEC-OBJID
           IMPORTING
              OBEG      = h_objec-begda
              OEND      = h_objec-endda
               SHORT     = short
                STEXT     = h_OBJEC-stext
          EXCEPTIONS
                NOT_FOUND = 1
                OTHERS    = 2.
      IF SY-SUBRC = 0.
        modify h_OBJEC index H_TABIX.
      ENDIF.
    endloop.
endif.
end-of-selection
END-OF-SELECTION.
read objects of the organizational unit
OBJID = OBJECTS-SOBID.
CALL FUNCTION 'RHPH_PICK_UP_PERSONS'
      EXPORTING
           BEGDA      = PCHBEGDA    "Correction 0410219
           ENDDA      = PCHENDDA    "Correction 0410219
         STATUS     = '1'
           WITH_STEXT = 'X'
       TABLES
            OBJECTS    = OBJECTS
            PERSONS    = H_PERSONS
      EXCEPTIONS
           UNDEFINED = 1
           OTHERS     = 2.
IF SY-SUBRC = 0.
prepare objects !
    objects-otype = h_persons-ttype.
    objects-sobid = h_persons-tobid.
    append objects.
ELSE.
    EXIT.
ENDIF.
CLEAR OBJECTS. REFRESH OBJECTS.
prepare sel_objects !
pers_objects-PLVAR = PCHPLVAR.
LOOP AT H_PERSONS.
    pers_objects-OTYPE = H_PERSONS-TTYPE.
    pers_objects-SOBID = H_PERSONS-TOBID.
    APPEND pers_objects.
ENDLOOP.
sort objects and delete adjacent duplicates
SORT Pers_OBJECTS BY PLVAR OTYPE SOBID.
DELETE ADJACENT DUPLICATES FROM Pers_OBJECTS COMPARING PLVAR OTYPE
SOBID.
CALL FUNCTION 'RHPK_FIND_PERS_WITH_EXPIRED_Q'
       EXPORTING
           PLVAR            = PCHPLVAR
           CHECK_BEGDA      = PCHBEGDA
           CHECK_ENDDA      = PCHENDDA
           SUBTY            = $ownsb                        "'B032'
         only_essential   =
         target_otype     =
         target_ap_iea    =
       TABLES
            IMP_PER_TAB     = pers_objects
            QUALI_TAB       = QUALI_TAB
            PERSONS         = LIST_OUTPUT
        altq_tab          =
      EXCEPTIONS
           NO_QUALIFICATION = 1
           NO_PERSON_FOUND = 2
           OTHERS           = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
100% case
READ TABLE pers_objects INDEX 1 TRANSPORTING NO FIELDS.
IF SY-SUBRC = 0.
    sort pers_objects by otype sobid.
check the selected persons: if org.unit was selected !
    Loop at pers_objects.
      H_TABIX = SY-TABIX.
      READ TABLE LIST_OUTPUT WITH KEY OTYPE = pers_objects-OTYPE
                                       SOBID = pers_objects-SOBID
                                       BINARY SEARCH.
      IF SY-SUBRC <> 0.
      person doesn't belong to the selected org.unit
      DELETE LIST_OUTPUT INDEX H_TABIX.
      ENDIF.
    ENDLOOP.
ENDIF.                               "org.unit check needed ?
end-of-selection.
sort h_objec by otype objid.
sort list_output by otype sobid.
sort h_persons by ttype tobid.
ALV-Liste aufbauen
loop at h_objec.
    loop at h_persons where otype = h_objec-otype     "XSC
                      and   sobid = h_objec-objid.    "XSC
      Read table list_output with key
                             otype = h_persons-ttype
                             sobid = h_persons-tobid
                             binary search.
      if sy-subrc = 0.
        h_tabix1 = sy-tabix.
        while sy-subrc = 0.
          clear alv_output.                            "XSC
          ALV_OUTPUT-otype    = h_objec-otype.
          ALV_OUTPUT-sobid    = h_objec-objid.
          ALV_OUTPUT-stext    = h_objec-stext.
          ALV_OUTPUT-Ptype    = LIST_OUTPUT-otype.
          ALV_OUTPUT-pobid    = LIST_OUTPUT-sobid.
          ALV_OUTPUT-pshort   = LIST_OUTPUT-short.
          ALV_OUTPUT-ptext    = LIST_OUTPUT-stext.
          ALV_OUTPUT-qualid   = LIST_OUTPUT-qualid.
          ALV_OUTPUT-qualstxt = LIST_OUTPUT-qualstxt.
          ALV_OUTPUT-expbegda = LIST_OUTPUT-vbegda.
          ALV_OUTPUT-expendda = LIST_OUTPUT-vendda.
      PERFORM FIND_TRAINING TABLES QUALI_TAB EVENT_TAB COLLECTED_EVENTS
                USING $PLVAR $GDATE H_EVENTS H_QUAL.
          IF NOT EVENT_TAB[] IS INITIAL.
            READ TABLE COLLECTED_EVENTS WITH KEY
                                 QUALID = LIST_OUTPUT-QUALID.
            IF SY-SUBRC = 0.
              ALV_OUTPUT-ICON_S_EVENTS = ICON_BOOKEVENT.
            endif.
          ENDIF.
          Append ALV_OUTPUT.
          h_tabix1 = h_tabix1 + 1.
          READ TABLE list_output INDEX h_tabix1
                     COMPARING otype sobid.
        endwhile.
      endif.
    endloop.
endloop.
check if indicator for qualification view is set
IF h_qual = 'X'.                                          "note 956731
    SORT alv_output by qualid OTYPE SOBID ptype pobid       "note 956731
    expbegda expendda.                                      "note 956731
ELSE.                                                     "note 956731
    SORT alv_output by OTYPE SOBID ptype pobid qualid expbegda expendda.
ENDIF.                                                    "note 956731
DELETE ADJACENT DUPLICATES FROM ALV_OUTPUT COMPARING OTYPE SOBID ptype
    pobid qualid expbegda expendda.
stext_AQ und icon-Feld noch nicht gefüllt
    perform PREPARE_TOP_OF_LIST.
    perform Build_FIELDCAT using GT_FIELDCAT[] H_EVENTS.
    perform ALV_LAYOUT USING alv_layout.
    G_REPID          = SY-REPID.
    G_VARIANT-REPORT = G_REPID.
    PERFORM EVENTTAB_BUILD USING GT_EVENTS.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
    I_INTERFACE_CHECK        = 'X'
        I_CALLBACK_PROGRAM       = G_REPID
    I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
        I_CALLBACK_USER_COMMAND = ALV_USERCOMMAND
        I_STRUCTURE_NAME         = 'HRPDV_EXPIRED_Q'
        IS_LAYOUT                = ALV_LAYOUT
        IT_FIELDCAT              = GT_FIELDCAT[]
    IT_EXCLUDING             =
    IT_SPECIAL_GROUPS        =
    IT_SORT                  =
    IT_FILTER                =
    IS_SEL_HIDE              =
        I_DEFAULT                = 'X'
        I_SAVE                   = 'A'
        IS_VARIANT               = G_VARIANT
        IT_EVENTS                = GT_EVENTS
    IT_EVENT_EXIT            =
    IS_PRINT                 =
    IS_REPREP_ID             =
    I_SCREEN_START_COLUMN    = 0
    I_SCREEN_START_LINE      = 0
    I_SCREEN_END_COLUMN      = 0
    I_SCREEN_END_LINE        = 0
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER =
      ES_EXIT_CAUSED_BY_USER   =
      TABLES
        T_OUTTAB                 = ALV_OUTPUT
      EXCEPTIONS
          PROGRAM_ERROR            = 1
          OTHERS                   = 2 .
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
*&      Form FIND_TRAINING
      text
     -->P_QUALI_TAB text
     -->P_EVENT_TAB text
     -->P_$PLVAR text
     -->P_GDATE text
     -->P_H_EVENT text
     -->P_H_QUAL text
FORM FIND_TRAINING TABLES P_QUALI_TAB STRUCTURE QUALI_TAB
                           P_EVENT_TAB STRUCTURE EVENT_TAB
                           P_COLLECTED_EVENTS STRUCTURE COLLECTED_EVENTS
                   USING   VALUE(P_$PLVAR) LIKE P1000-PLVAR
                           VALUE(P_GDATE) LIKE P1000-GDATE
                           VALUE(P_H_EVENT) TYPE ANY
                           VALUE(P_H_QUAL) TYPE ANY.
IF NOT P_H_EVENT IS INITIAL.
    READ TABLE EVENT_TAB INDEX 1 TRANSPORTING NO FIELDS.
    IF SY-SUBRC <> 0.
      CLEAR P_EVENT_TAB. REFRESH EVENT_TAB.
      CLEAR P_COLLECTED_EVENTS. REFRESH P_COLLECTED_EVENTS.
      IF EVENT = FALSE.
        EVENT = TRUE.
      ELSE.
        EVENT = FALSE.
      ENDIF.
      CALL FUNCTION 'RHPH_FIND_TRAINING_FOR_QUAL'
           EXPORTING
                PLVAR            = PCHPLVAR
                GDATE            = SY-DATUM
              GET_NAME         = 'X'
           TABLES
                QUALI_TAB        = QUALI_TAB
                TO_Q_TAB         = EVENT_TAB
          EXCEPTIONS
               NO_QUALIFICATION = 1
               NO_OBJECT_FOUND = 2
               TECHNICAL_ERROR = 3
               OTHERS           = 4.
      IF SY-SUBRC = 0.
the found qualifications are picked up into table event_tab
      ENDIF.
      IF SY-SUBRC = 1.
        MESSAGE S015.   "Zu den Eingaben wurden keine Daten gefunden
      ENDIF.
      IF SY-SUBRC > 2.
        EXIT.
      ENDIF.
collect events when there are double.
Veranstaltungen kollektieren, Können mehrfach auftauchen, da
verschiedenen Qualifikationen von gleichen Veranstaltungen vermittelt
      LOOP AT P_EVENT_TAB INTO P_COLLECTED_EVENTS.
        APPEND P_COLLECTED_EVENTS.
      ENDLOOP.
      SORT P_COLLECTED_EVENTS BY QUALID STEXT.
    ENDIF.
ENDIF.
ENDFORM.                               " FIND_TRAINING
*&      Form PREPARE_TOP_OF_LIST
      text
--> p1        text
<-- p2        text
FORM PREPARE_TOP_OF_LIST.
DATA ALV_TOP_OF_LIST TYPE SLIS_LISTHEADER. "typ, key, info
DATA STEXT LIKE HRPDV_SUCCESSOR_VIEW-TTEXT.
DATA P_SUBRC LIKE SY-SUBRC.
DATA P_STEXT LIKE T777O-OTEXT.
DATA l_tabix like sy-tabix value 0.
DATA: h_counter TYPE i.                             "note 730486
ALV_TOP_OF_LIST-TYP = 'H'.
ALV_TOP_OF_LIST-INFO = TEXT-REQ.
APPEND ALV_TOP_OF_LIST TO GT_ALV_LIST_TOP_OF_LIST.
Organisationseinheit
ALV_TOP_OF_LIST-typ = 'S'.
Read text for organisationunit
PERFORM READ_TEXT_OTYPE_T777O(SAPLRHP0) USING SY-LANGU $ORGEH
                                                P_STEXT P_SUBRC.
ALV_TOP_OF_LIST-key = P_STEXT.
fill buffer for read organisation-text
CALL FUNCTION 'RH_TEXT_BUFFER_FILL'
     EXPORTING
          CHECK_STRU_AUTH = 'X'
          WITH_EXTINT     = ' '
       TABLES
            OBJECTS         = OBJECTS.
loop at objects for multipleselection
clear h_counter.                          "note 730486
LOOP AT OBJECTS.
    $OBJID = OBJECTS-SOBID.
    CALL FUNCTION 'RH_READ_OBJECT'
         EXPORTING
            PLVAR           = OBJECTS-PLVAR
            OTYPE           = OBJECTS-OTYPE
            OBJID           = $OBJID
         IMPORTING
          SHORT           = short
            STEXT           = STEXT
         EXCEPTIONS
            NOT_FOUND       = 1
            OTHERS          = 2.
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
      WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    IF h_counter >= 15.                               "note 730486
      MOVE '( ... )' TO ALV_TOP_OF_LIST-INFO.         "note 730486
      APPEND ALV_TOP_OF_LIST TO gt_alv_list_top_of_list.
      "note 730486
      EXIT.                                           "note 730486
    ENDIF.                                            "note 730486
    CONCATENATE $ORGEH OBJECTS-SOBID STEXT INTO
    ALV_TOP_OF_LIST-INFO SEPARATED BY SPACE.
    APPEND ALV_TOP_OF_LIST TO GT_ALV_LIST_TOP_OF_LIST.
    CLEAR ALV_TOP_OF_LIST.
    ALV_TOP_OF_LIST-typ = 'S'.
    l_tabix = l_tabix + 1.
    ADD 1 TO h_counter.                         "note 730486
ENDLOOP.
CLEAR ALV_TOP_OF_LIST.
ALV_TOP_OF_LIST-TYP = 'S'.
ALV_TOP_OF_LIST-key = TEXT-003.
WRITE PCHBEGDA TO ALV_TOP_OF_LIST-INFO.
APPEND ALV_TOP_OF_LIST TO GT_ALV_LIST_TOP_OF_LIST.
clear ALV_TOP_OF_LIST-INFO.
ALV_TOP_OF_LIST-key = TEXT-004.
WRITE PCHENDDA TO ALV_TOP_OF_LIST-INFO.
Append ALV_TOP_OF_LIST TO GT_ALV_LIST_TOP_OF_LIST.
ENDFORM.                               " PREPARE_TOP_OF_LIST
*&      Form BUILD_FIELDCAT
      text
     -->P_GT_FIELDCAT[] text
FORM BUILD_FIELDCAT USING P_GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV
                           P_H_EVENTS.
DATA: WA_FIELDCAT LIKE LINE OF P_GT_FIELDCAT.
DATA: P_REPNAME LIKE SY-REPID,
        L_TABIX LIKE SY-TABIX.         "local variable for sy-tabix.
P_REPNAME = SY-REPID.
Erstellen des Feldkataloges
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
     EXPORTING
           I_PROGRAM_NAME         = P_REPNAME
           I_INTERNAL_TABNAME     =
           I_STRUCTURE_NAME       = 'HRPDV_EXPIRED_Q'
           I_CLIENT_NEVER_DISPLAY = 'X'
           I_INCLNAME             = PRONAME
     CHANGING
           CT_FIELDCAT            = P_GT_FIELDCAT
     EXCEPTIONS
           INCONSISTENT_INTERFACE = 0
           PROGRAM_ERROR          = 0
           OTHERS                 = 0.
LOOP AT P_GT_FIELDCAT INTO WA_FIELDCAT.
    l_tabix = sy-tabix.
    CASE WA_FIELDCAT-FIELDNAME.
      when 'OTYPE'.
        WA_FIELDCAT-DDICTXT = 'L'.
      when 'SOBID'.
        WA_FIELDCAT-DDICTXT = 'L'.
      WHEN 'STEXT'.
        WA_FIELDCAT-DDICTXT = 'L'.
      when 'PTYPE'.
        WA_FIELDCAT-DDICTXT = 'L'.
      when 'POBID'.
        WA_FIELDCAT-DDICTXT = 'L'.
      when 'PSHORT'.
        WA_FIELDCAT-DDICTXT = 'L'.
      WHEN 'PTEXT'.
        WA_FIELDCAT-DDICTXT = 'L'.
      WHEN 'QUALID'.
        WA_FIELDCAT-DDICTXT = 'L'.
      WHEN 'QUALSTXT'.
        WA_FIELDCAT-DDICTXT = 'L'.
      WHEN 'EXPBEGDA'.
        WA_FIELDCAT-DDICTXT = 'L'.
      WHEN 'EXPENDDA'.
        WA_FIELDCAT-DDICTXT = 'L'.
      WHEN 'ICON_S_EVENTS'.
        IF P_H_EVENTS IS INITIAL.
          WA_FIELDCAT-NO_OUT = 'X'.
        else.
          WA_FIELDCAT-DDICTXT = 'X'.
        endif.
    ENDCASE.
    MODIFY P_GT_FIELDCAT FROM WA_FIELDCAT INDEX l_tabix.
ENDLOOP.
ENDFORM.                               " BUILD_FIELDCAT
*&      Form ALV_LAYOUT
      text
     -->P_L_ALV_LAYOUT text
FORM ALV_LAYOUT USING    P_ALV_LAYOUT TYPE slis_layout_alv.
build layout
P_LAYOUT-BOX_FIELDNAME = 'MARK_X'.   "fieldname for checkbox
P_ALV_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
P_ALV_LAYOUT-BOX_TABNAME   = ALV_OUTPUT.   "tabname for checkbox
p_ALV_layout-info_fieldname = 'ALV_COLOR'.
ENDFORM.                               " ALV_LAYOUT
FORM eventtab_build USING
FORM EVENTTAB_BUILD USING RT_EVENTS TYPE SLIS_T_EVENT.
DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
MOVE 'TOP_OF_PAGE' TO LS_EVENT-NAME.
MOVE 'TOP_OF_PAGE' TO LS_EVENT-FORM.
APPEND LS_EVENT TO RT_EVENTS.
ENDFORM.                    "EVENTTAB_BUILD
*FORM TOP_OF_PAGE
FORM TOP_OF_PAGE.                                           "#EC CALLED
NEW-PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY = GT_ALV_LIST_TOP_OF_LIST[].
ENDFORM.                    "TOP_OF_PAGE
      FORM USER_COMMAND                                             *
USER_COMMAND for the list of successor view                         *
--> r_ucomm                                                       *
--> rs_selfield                                                   *
FORM USER_COMMAND USING ALV_UCOMM LIKE SY-UCOMM
      RS_SELFIELD TYPE SLIS_SELFIELD.                       "#EC CALLED
DATA: SELECTED_LINE LIKE HRPDV_expired_q.
DATA: SOBID_QUA LIKE P1000-OBJID.
DATA: LT_PERS_TAB LIKE HRSOBID OCCURS 0 WITH HEADER LINE.
CASE ALV_UCOMM.
    WHEN '&IC1'.                       "per Doppelklick auswählen
      READ TABLE ALV_OUTPUT INDEX
      RS_SELFIELD-TABINDEX INTO SELECTED_LINE.
      CASE RS_SELFIELD-FIELDNAME.
        WHEN 'POTYPE' or 'POBID' or 'PTEXT' or 'OTYPE' or 'SOBID' or
'STEXT' or 'QUALID' or 'QUALSTXT' or 'EXPBEGDA' or 'EXPENDDA'.
          READ TABLE ALV_OUTPUT INDEX RS_SELFIELD-TABINDEX INTO
                Help_output.
          IF SY-SUBRC <> 0.
            MESSAGE S027.               "Bitte gültige Zeile auswählen
            EXIT.
          Endif.
     IF ALV_OUTPUT-SOBID IS INITIAL.
       MESSAGE S015. "Zu den Eingaben wurden keine Daten gefunden
     ELSE.
     converte the variable because of the different types
     SOBID_QUA = SELECTED_LINE-SOBID_QUA.
          CALL FUNCTION 'RHPP_SHOW_PROFILE'
            EXPORTING
              PLVAR        = pchplvar
              OTYPE        = SELECTED_LINE-PTYPE       "XSC
              OBJID        = SELECTED_LINE-POBID       "XSC
              BEGDA        = PCHBEGDA
              ENDDA        = PCHENDDA
              MAINTAIN     = ' '
            EXCEPTIONS
              NO_AUTHORITY = 1
              NOT_FOUND    = 2
              OTHERS       = 3.
          CASE SY-SUBRC.
            WHEN 0.
            All right.
            WHEN 1.
              MESSAGE S015.
            Zu Ihren Eingaben konnten keine Daten gefunden werden!
            WHEN 2.
              MESSAGE E000.
            Dazu haben sie keine berechtigung!
            WHEN OTHERS.
              MESSAGE E008.
            Es ist ein unvorhergesehener Fehler aufgetreten.
          ENDCASE.                     "sy-subrc.
          CLEAR ALV_OUTPUT.
   ENDIF.    "IF ALV_OUTPUT-SOBID IS INITIAL.
   CLEAR ALV_OUTPUT-SOBID.
        when 'ICON_S_EVENTS'.
          IF SELECTED_LINE-ICON_S_EVENTS IS INITIAL.
            MESSAGE S027.              "Bitte gültige Zeile auswählen
            EXIT.
          ENDIF.
          CLEAR LT_PERS_TAB.
          REFRESH LT_PERS_TAB.
          LT_PERS_TAB-PLVAR = pchPLVAR.
          LT_PERS_TAB-OTYPE = SELECTED_LINE-PTYPE.          "XSC
          LT_PERS_TAB-SOBID = SELECTED_LINE-POBID.          "XSC
          APPEND LT_PERS_TAB.
          SOBID_QUA = SELECTED_LINE-QUALID.
          CALL FUNCTION 'RHPP_SHOW_SUGGEST_EVENTS'
          EXPORTING
            P_PLVAR      = pchPLVAR
            P_SOBID_QUA = SOBID_QUA
          P_PROFCY_REQ = SELECTED_LINE-RATING_REQ
            P_GDATE      = sy-datum
          TABLES
          EVENT_TAB    =
            PERS_TAB     = LT_PERS_TAB.
      endcase.
      CLEAR SELECTED_LINE.
ENDCASE.                             "case sy-ucomm
CLEAR SY-UCOMM.
ENDFORM.                    "USER_COMMAND

Pls be more specific in your question. If you want to include an extra field in your alv output, then read the field catalog table you created through "Reuse_alv_fieldcatalog_merge" and then add an extra entry in it giving the details of the field you want to add.. and then call the "resuse_alv_grid_display",
Hope this helps. To be able to help you in a better way, kindly revert with any specific issue.
Reward if helpful,
Karan

My iTunes Match not add my songs to my iPod touch that I have on my external hard drive I had this drive for 3 years now ain't notting wrong with my songs on it but they are not been added to my iPod why is this so plz fix this or iTunes Match gonna suck

So I sign up for iTunes Match an start adding music to my iPod touch 5 generation I have a lot of music on my hard drive that I had for over 3 years now but some reason they are not syncing to my iPod touch notting is wrong with my music some may not have a track name but they r fine. Note ,before I added iTunes Match to my iPod I could of synced my music with no problem , so can u guys plz fix this ? Why can't my music be added to my iPod ?iTunes don't have all the songs I want I have my own music before iTunes so I don't understand why can't I have them on my iPod touch 5gen ?

Hi,
What is the iCloud status of these tracks?
You can add icloud status column to song view - go to menu > view> view options and tick box. This will tell you what has been Matched, Uploaded, Purchased, Inelligible, Duplicate or Waiting.
Jim

My apple wireless keyboard got wet a year ago i sprayed the cleaning spray on it some of the keys are working but some of the keys aren"t working. it got sprayed a year ago What should i do??? Can it be recovered plz tell?

I sprayed it a year ago i really like the keyboard and i really need it can it be recovered??? My apple wireless keyboard got wet a year ago i sprayed the cleaning spray on it some of the keys are working but some of the keys aren"t working. it got sprayed a year ago What should i do??? Can it be recovered plz tell?

There is almost no chance it can be recovered, except at a cost far greater than a new keyboard. Once wet, spraying with a cleaner will not do any good and most likely will make the situation worse.
Best thing at this point is go to your Apple store, or the on-line store, and buy a new keyboard. Water damage is not covered by the warranty or AppleCare.

Plz tell me wht is error in code.its showing illegal start of expression

import java.awt.*;
import java.awt.event.*;
import java.awt.image.*;
class Image01 extends Frame{ //controlling class
Image rawImage;    //ref to raw image file fetched from disk
Image modImage;      //ref to modified image
int rawWidth;
int rawHeight;
int inTop;           //Inset values for the container object
int inLeft;
   public static void main(String[] args)     {
         Image01 obj = new Image01();                 //instantiate this object
        obj.repaint();                              //render the image
     }                                           //end main
public Image01()
   {                                          //constructor
                                                  //Get an image from the specified file in the current directory on the local hard disk.
    rawImage =    Toolkit.getDefaultToolkit().getImage("myco.jpeg");
    MediaTracker tracker = new MediaTracker(this);
    tracker.addImage(rawImage,1);
   try{                                         //because waitForID throws InterruptedException
if(!tracker.waitForID(1,10000))
        System.out.println("Load error.");
        System.exit(1);
   catch(InterruptedException e)
      System.out.println(e); }
        this.setVisible(true);//make the Frame visible
      rawWidth = rawImage.getWidth(this);               //Raw image has been loaded. Establish width and
    rawHeight = rawImage.getHeight(this);            // height of the raw image.
    inTop = this.getInsets().top;                    //Get and store inset data for the Frame object so
    inLeft = this.getInsets().left;                 // that it can be easily avoided.
      this.setSize(800,800);
    //this.setSize(inLeft+rawWidth,inTop+2*rawHeight);        //Use the insets and the size of the raw image to
    this.setTitle("Copyright 1997, Baldwin");                // establish the overall size of the Frame object.
    this.setBackground(Color.yellow);                        //Make the Frame object twice the height of the
                                                             // image so that the raw image and the modified image
                                                            // can both be rendered on the Frame object.
    public void handlepixels(Image rawImage,int x,int y,int rawWidth, int rawHeight)
    int[] pix = new int[rawWidth * rawHeight];              //Declare an array object to receive the pixel
                                                         // representation of the image
   //Convert the rawImage to numeric pixel representation
   try
     PixelGrabber pgObj = new PixelGrabber(rawImage,0,0,rawWidth,rawHeight,pix,0,rawWidth);
           if(pgObj.grabPixels() && ((pgObj.getStatus() & ImageObserver.ALLBITS) != 0)    {
for (int j = 0; j <rawHeight ; j++)     {
                    for (int i = 0; i < rawWidth; i++)        {
                          handlesinglepixel(x+i, y+j, pixels[j * rawWidth + i]);
                                                        //end if statement
           else System.out.println("Pixel grab not successful")     }
    catch(InterruptedException e)
System.out.println(e);     }
    modImage = this.createImage(new MemoryImageSource(rawWidth,rawHeight,pix,0,rawWidth));          //Use the createImage() method to create a new image
                                                                                                    // from the array of pixel values.s
    this.addWindowListener(new WindowAdapter()                                                      //Anonymous inner-class listener to terminate program
          //anonymous class definition
          public void windowClosing(WindowEvent e)
               System.exit(0);                                                  //terminate the program
          }//end windowClosing()
      }   //end WindowAdapter
    );//end addWindowListener
}//end constructor
//Override the paint method to display both the rawImage
// and the modImage on the same Frame object.
public void paint(Graphics g)
              if(modImage != null)
                     g.drawImage(rawImage,inLeft+50,inTop+50,this);
                     g.drawImage(modImage,inLeft+50,inTop+rawHeight+100,this);
                        }//end if
     }//end paint()
}//end Image05 class plz tell me the how to remove error

import java.awt.*;
import java.awt.event.*;
import java.awt.image.*;
class Image01 extends Frame
Image rawImage;
Image modImage;
int rawWidth;
int rawHeight;
int inTop;
int inLeft;
public static void main(String[] args)
         Image01 obj = new Image01();
        obj.repaint();
public Image01()
               rawImage = Toolkit.getDefaultToolkit().getImage("myco.jpeg");.
               MediaTracker tracker = new MediaTracker(this);
               tracker.addImage(rawImage,1);
        try
           if(!tracker.waitForID(1,10000))
           System.out.println("Load error.");
           System.exit(1);
       catch(InterruptedException e)
       System.out.println(e);
     this.setVisible(true);
    rawWidth = rawImage.getWidth(this);
    rawHeight = rawImage.getHeight(this);
    inTop = this.getInsets().top;
    inLeft = this.getInsets().left;
    this.setSize(800,800);
     public void handlesinglepixel(int x, int y, int pixel)        *// this line is showing error*
     int alpha = (pixel >> 24) & 0xff;
     int red   = (pixel >> 16) & 0xff;
     int green = (pixel >> 8) & 0xff;
     int blue = (pixel      ) & 0xff;
    public void handlepixels(Image rawImage, int x, int y, rawWidth, rawHeight)
           int[] pix = new int[rawWidth * rawHeight];
                     try
                         PixelGrabber pgObj = new PixelGrabber(rawImage,0,0,rawWidth,rawHeight,pix,0,rawWidth);
                         if(pgObj.grabPixels() && ((pgObj.getStatus() & ImageObserver.ALLBITS) != 0))
                               for (int j = 0; j <rawHeight ; j++)
                                       for (int i = 0; i < rawWidth; i++)
                                                handlesinglepixel(x+i, y+j, pix[j * rawWidth + i]);
                         else System.out.println("Pixel grab not successful");
                 catch(InterruptedException e)
                     System.out.println(e);
          modImage = this.createImage(new MemoryImageSource(rawWidth,rawHeight,pix,0,rawWidth));
        this.addWindowListener(new WindowAdapter()
                     public void windowClosing(WindowEvent e)
                            System.exit(0);
                      }//end windowClosing()
        }   //end WindowAdapter
       );//end addWindowListener
}//end constructor
public void paint(Graphics g)
              if(modImage != null)
                     g.drawImage(rawImage,inLeft+50,inTop+50,this);
                     g.drawImage(modImage,inLeft+50,inTop+rawHeight+100,this);
              }//end if
}//end paint()
}//end Image05 classnow i have deleted all comments & also highlighted the line which is giving error & thanks a lot to all of u who tried to solve my problem but still its showing same error illegal start of expression .if i run this program without handlesinglepixel & handlepixels method its working properly

Plz tell me which sound file format uses minimum memory of a director file

plz tell me which sound file format uses minimum memory of a director file. bcoz on adding sound the projector file becomes a large memory file .
so i am confused that which file format should be used.

saramultimedia,
Are you certain that you're asking your question in the right place? This forum is about the Adobe Media Encoder application. Most of the people who answer questions here are familiar with the digital video and audio applications such as After Effects and Premiere Pro.
If you have a question about Director, it's probably best to ask on the Director forum. But I see that you already know that, since you already have a thread on that forum to ask this question, and it got an answer:
http://forums.adobe.com/thread/769569

Okay so my iphone says its connected to the internet but the internet only works for games so i cant use things like facebook twitter or youtube PLZ TELL ME HOW TO FIX THISf

Okay so my iphone says its connected to the internet but the internet only works for games so i cant use things like facebook twitter or youtube PLZ TELL ME HOW TO FIX THISf by the way it an iphone 4s and i have never encountered this problem before my dads iphone is the same after we updated to ios 8.1.1 but my mum hasnt updated yet and hers is fine

If deleting then reinstalling the apps doesn't work, then contact the app developer for support.
It sounds, though, like your internet connection is simply very slow.
Try making a backup, then restoring the iPhone as new, and testing again.

Plz tell the Main Report prgm for MIGO

Hi Experts,
Plz tell the Main Report prgm for MIGO, Actually i want to debug the particular prgm, if i enter in se93 i get the prgm name but every prms are Include prgm only so plz if anybody knows, its a very helpfull for me..
Thanks,
Gowri.

hi ,
This is a module pool program and you cannt run it from Se38
the Main program is SAPLMIGO
What do u want to debug ?
Thanks
Soumyadip

How can we create a Collective search help plz tell me with steps

How can we create a Collective search help plz tell me with steps
thanks,
basu

Hi
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
CREATION:
Go to SE11 Tcode
select search help
give the 'z' search help name and create
select the selection method ur table name eg : 'mara'
dialog module 'display value immediately'.
add the field whatever u want and lpos = 1 and spos = 1 and check import and export parameter.
where left position when displaying and spos = search position
and then save and activate ..
See the links:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
Search Help Exits:
Re: dynamic values for search help
Re: Dynamic search help
Reward points for useful Answers
Regards
Anji

Plz tell this ans

Similar Messages

Maybe you are looking for