Plzz help ....unlocking memory card

i set a password on my memory card and forgot it ,
i want to know if der is any way to reset d password....
plzz.....
i tried formatting it in d mobile itself , but it asks password to format also...
tried to format it in pc also but dat too didnt work....
plzzzzz help , my cell is 5220 music xpress and it's a i gb mem card.......
Message Edited by aakashk95 on 07-Jan-2009 08:44 AM

If your phone is an S40 phone (which it is in your case) and you don't have a USB card reader then your only options are to remember the password (somebody set one even if it wasn't you) or to buy a new memory card.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

  • How to unlock memory card

    Depending on the memory card you are using, there is a lock switch located at the side or the back that you can use to unlock the memory card. Please refer to the illustration below for more information.
    If my post answers your question, please mark it as "Accept as Solution"

    This was a great picture and helpful solution. Thanks so much. so easy yet if you don't know it, very frustrating. 

  • Please help! memory card password! I never set one...

    I plugged in my memory card from my broken nokia e71 into a new nokia e6 and it asks for a password! I never set a password to begin with! is there some default code to override this? I really need my pictures off this sd card. please help.

    @Koncrete
    You might like to look at this post in particular and others by shuntfield in this thread:/t5/Eseries-and-Communicators/E71-Auto-Remote-Lock​/m-p/420626/highlight/true#M34724
    Although you haven't knowingly set a password AFAIK it is possible to change it to new one using the remote lock feature.
    Happy to have helped forum with a Support Ratio = 42.5

  • How to unlock memory card nokia 5310

    i just updated my nokia 5310 firmware from 5.81 to 8.32 and now my memory card has locked itself.
    can anyone help with this?
    does anyone know the code?

    19-Oct-2008 07:22 AM
    paittola wrote:
    I think the locking code returns to "factory default" after a firmware update is made.
    The phone's lock code does return to the default 12345 after a firmware update with phones that do not support UDP (User Data Preservation).
    The MMC password does not get reset to the factory default simply because there is no factory default for that.
    The file in the phone's memory containing the MMC password is erased when the software is updated, which means that the phone no longer remembers the password. The phone then prompts the user for it, which is when they wish they'd made a note of it somewhere!
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Please help - 7373 memory card not recognised

    I bought a 2GB Kingston memory card for my nokia 7373. I put photos on it from a converter in my computer, but when I put it in my 7373 it does not recognise the card. However, my friend's 7373 recognises the card and it works fine. The memory card slot on my phone does not appear broken to me. Does anyone have any suggestions as to how to make the card work in my phone of or what could be wrong?

    if your card works on your friends phone then the mmc is fine something is wrong with your phone.it can be hardware.though it does not appear faulty from outside but there are filters which might have got spoilt and therefore it is better to visit to NSC.
    tongue is too confused on what to speak

  • Remote lock & Memory card corrupted issue

    Remote lock & Memory card corrupted issue
    Hi Dear Friends,
    You might have experienced the "Memory card corrupted issue."
    Don't panic! The solution is here!
    Your memory card is just 'locked', it isn't 'corrupted'!
    For sure, this post would be of great help to you, if:
    • You have enabled the "Remote lock" feature of your Nokia device.
    • You have sent the remote lock message to your device and locked it remotely.
    Finding the solution really took me a lot of time. I was inspired by various posts on the Discussion, and decided to find the official notes on the issue. So would like to thank those who shared their tips, and helped us solve this problem.
    I'm using E66, (you might use something else), and would refer to E51's and E65's User guide so often.
    Of course, I'm not going to explain the instructions, and recommend you to refer to your user guides when needed.
    On the contrary, I'm going to explain what may not be mentioned in your user guides.
    Let’s Begin
    What Has Happened:
    In short, you attempted to test the feature, your phone was locked, you keyed in the lock code, code was accepted, you used the phone for a while, switched it off, powered it on, you were prompted the Lock code, you keyed in the lock code, code was accepted, you attempted to view some stuff that was on your memory card, you didn't find it, you tried to run a program that was installed on your memory card, the program icon didn't open, you put the memory card in the card reader and connected it to PC, it was not detected, you went to Menu> Tools> Memory card> You saw "Memory card corrupted"!
    Don't, don't select the Yes selection key if you got the caution message, "Memory Card corrupted, reformat it?" because your memory card isn't corrupted, it's simply being locked!
    But you can't find the unlock memory card command in Menu> Tools> Memory card> Options.
    So? What to DO?
    1. (This step is optional) Disable the Remote lock feature.
    (Refer to your user guides) and change Allow Remote Lock> to no.
    Then, while the unit is on,
    2. Press the power key briefly, and select Remove memory card.
    3. Remove the memory card from the slot.
    4. Press OK if prompted.
    5. Reinsert the memory card in the slot.
    6. Reopen Menu> Tools> Memory card.
    Is your memory card detected? If yes!
    7. Follow tips number 2 & 3 of What to Know section below.
    Did you get "Password removed" message?
    If no, be careful of the case of the first character.
    If you had changed the Remote lock message many times, use the one that was practically sent to the device via text message.
    . In case you had set a password on your memory card before, you may also attempt to unlock the locked memory using your own password, not the first eight characters of the remote lock message.
    Step seven would make the memory card detectable to the connected card reader to the PC too.
    8. The memory card is detected temporarily, but it is locked and the "memory card corrupted" issue reappears every time you switch off/on the phone, unless you successfully complete step seven.
    What to Know?
    Official User guide Tips:
    1. Remote locking also locks your memory card. (E51 page100)
    . Yes, the one mobile phone that sends your device the predefined remote locking message, receives the confirmation message in response, indicating, "Mobile telephone and memory card are locked". But it isn't written in E66's and E65's.
    2. To unlock the memory card, select Menu> Tools> Memory> Options> Remove password, and "enter the remote locking message as the password". (E51 page100)
    . Yes, quite clear, but the quoted part ("enter the remote locking message as the password") isn't written on my E66's User guide, and there's a vague precaution on E65's, (refer to number 4).
    3. If the message is longer than 8 characters, the first 8 characters are used as the memory card password. (E51 page100)
    . Yes, quite clear good E51, but I don't own you; I have E66 your little sister. I owe my memory card's survival to nice users on the Discussion.
    4. The maximum number of characters allowed is 8. Using more than 8 characters could prevent unlocking the memory card and require reformatting it. If reformatting the memory card is required, all information on the card will be lost. (E65 page28)
    . Quite interesting, but it contradicts what good E51 says in number three¡!
    . And it contradicts my own experience of the issue (and some other users' on the Discussion) too, since my E66's memory card accepted the 'first eight characters' of the 'ten-character long’ remote lock message that I had previously used to remote lock it.
    . The first three tips are quite important and shouldn't have been excluded from E66's and E65's user guides. I don't have the time to download and review all the user guides that support this feature, but at least I read some user manuals and also got the impression (from the posts on the discussion) that there had been not enough information on E66's, E65's, E71's, N96's, and some others.
    You may like to do a simple search on Google:
    "The first 8 characters are used as the memory card password" site:nokia.com
    Since the content of the user guides on the server seem not be searchable for any reason, you won't find any official support result except those of the good users on the Discussions. And the 'Nokia Site Search" brings no result too. (At least on the date of this post).
    ¡ Terribly sorry for those who have selected Yes to the Reformat caution message. It wasn't your fault. But there's an idiom that says, sleep on it! "Think about it for a while before coming up with a decision".
    But now that you have tested the feature and know its solution, don't be afraid, and enable the Remote lock feature again! God forbid, but it may be needed one day!
    Yours,
    http://nds1.nokia.com/phones/files/guides/Nokia_E51_UG_en.pdf
    http://nds1.nokia.com/phones/files/guides/Nokia_E65-1_UG_en.pdf
    http://nds1.nokia.com/phones/files/guides/Nokia_E66-1_UG_en.pdf

    Dear, I guess, / This article doesn't suit your case. / • You have not enabled the "Remote lock" feature of your Nokia device. / • You have not locked your device remotely. / Because you don't know where the remote lock is and haven't played with its settings. / You need to explain what has happened. / The only thing we get is that your memory card doesn't open. / 1. your phone model, e.g., 5130. / 2. What did you do recently that might have caused this issue? / 3. What methods did you try to unlock it? / Use some of the tips provided above. (except number 1). / Yours

  • Need Urgent Help Nokia N73 Memory Card Unlock

    Hello There,
    I have Nokia N73 and i can't access my memory card. I have not set any passwords but still its asking for password I don't know how to do this. Please guys help me out with this issue whenever i click on memory card its asking me for password which i don't know.
    Thanks in Advance
    Raviraj..

    it is very urgent otherwise i ll loose my important data..
    Please reply
     Edited: Email address removed.
    MODERATOR NOTE:
    Please be informed that personal/contact information are not allowed to be posted in this forum for your privacy and security reasons. Thank you for understanding.
    Kind regards,
    coffee_jelly23

  • Memory card unlock

    my nokia 5800 memory card lock after phone memory fromet how to memory card unlock password

    Hey lahiruthisaru,
    Welcome to the discussion board!
    You should try to format your memory card via your PC, or try to perform a Hard reset with your Memory card inserted in your phone.
    Hope this help, please let us know!
    BaptisteJu

  • I updated my Macbook Pro last week to Lion.  I went to go import pictures from a memory card to my iPhoto, but only a portion of them loaded before my iPhoto froze and I had to Force Quit it. Now iPhoto won't even open... Help!

    I updated my Macbook Pro last week to Lion.  I went to go import pictures from a memory card to my iPhoto, but only a portion of them loaded before my iPhoto froze and I had to Force Quit it. Now iPhoto won't even open... Help!
    Please! I need an answer fast!!!!

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • No Memory Card, Want Pics Off Phone Memory! Looking Everywhere for answers PLS HELP!!!!!!

    I Just recieved a new bb curve 3G from my hubby. I took a few pictures, but have not yet bought a memory card. I want to know how to get the pics i took already OFF my phone an onto my computer. I find it kind of dumb if you can't take the pics off your phone without a card as they are saved to my phone memory... Pls any help would be appreciated! Driving me nuts!!!!
    Thanks in advance! 

    When you get the media card, simply move the pictures to the media card right from the device.  The only other way to do it is to install the Desktop Manager software to your computer and get the pictures through that. 
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • N80/N73 Memory Card help

    Can anyone pls tell me, the maximum size of memory card N80/N73 can take. Cheers

    Hi joccy
    For N80 maximum size is 2GB, whereas newer Nokia such as N95 will take 4GB
    Sandisk are confident enough to offer 5 year warranty on their products
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Photosmart 3210 All-in-One printer will not read Micro SDHC memory card. Help!

    I have a Photosmart 3210 All-in-One printer that will not read my Micro SDHC memory card. Help! I get an memory card error message but no idea where to go from there.

    Hello
    I understand the printer can't read the memory card.
    This is a url for the printer specifications and include the memory card types supported.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00408357&tmp_task=prodinfoCategory&cc=us&dlc=en...
    Here is a url for troubleshooting memory cards.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00059994
    If you need more assistance just let me know.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Need Help! Dell poweredge T630 cannot reboot after trying to add new memory card

    What errors are you seeing on the screen? 

    hi, can any one please advise what should I do for my server? Dell poweredge T630 cannot reboot after trying to add new memory card. Even I remove the newly added memory card and only keep the original one there, it still cannot reboot. Before I try to add the memory card, it works well without any rebooting issues.
    Thank you so much for help
    steven
    This topic first appeared in the Spiceworks Community

  • I got my camera memory card stuck inside the CD drive... help?

    I tried to put the memory card into the right slot but i wasn't looking and it went in the wrong slot and i can't see it....

    Try one of the following ideas in anyone of the following Apple Support Communities Threads.
    Help a Klutz please: Apple Support Communities
    Shoot i got my memory card in my cd...: Apple Support Communities
    I  put an SD card into the CD slot...: Apple Support Communities
    Dennis

  • Help needed regarding my memory card

    I connected my phone to my laptop to watch a video off my phone but when I disconnected it all my file disappeared. So I thought, "great my memory card has been formatted." I just knew that it meant starting over. Every time I download something, it says 'saved' but it doesn't display on my phone.

    Hello Tweeta, 
    Welcome to the forums. 
    Can you please clarify a bit when you say "Every time I download something" do you mean you are downloading using your browser or are you transferring files from your computer to your BlackBerry® smartphone? 
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Maybe you are looking for

  • Mixing RAM Manufacturers?

    My apologies if this has been asked before; I searched the forum but couldn't find anything that answered my question properly. So-called 3rd party Memory is new territory for me. I'm looking to upgrade the RAM in my iMac at home; it's a late 2006 20

  • Adding a page path to an "all items in page group" SELECT?

    I have a case where a client's asked me to produce a "report" (nothing fancy, so I'm thinking a basic SELECT right out of the DB here rather than a full solution like Discoverer or Business Objects) for them on all items in particular page groups in

  • Iphoto has become unreadable on external drive

    Hi, my husband has iphoto on an external hard drive. This drive is also his time machine backup. Recently, iphoto stopped opening. Then the entire drive wasn't recognized by the imac. I fixed that by simply unplugging it and plugging it back in. But

  • Rman jobs "Suspended on Agent Unreachable" through EM

    Hi, all: when I schedule an RMAN backup in OEM, It has a suspended on agent unreachable status immediately. Deleting the job and creating a new one, and the new job became suspended even before it's first scheduled job I can manually backup through r

  • FTP problems with CS5 - Help please

    I volunteer helping charity and education organisations with their websites.  One of my clients has just bought CS5 - I personally am still working on CS3 - so when I went to help them download their site first of all the set-up was quite different (