PlzzHow can we check the version of Business Content in ECC 5.0 version??

Hello Experts,
Plz tell me.. How could we check the version of the business content installed for ECC 5.0?  I tried to search for the same in the forum but I couldnt.. plz let me know as I doubt that the business content is not properly installed for ECC 5.0 in my PC. and also I see only Technical content for Object Types under Business Content in AWB.
I always thank people awarding points!!

Hi Ajay, Thanks for the Info regarding PI...
I am using my ECC 5.0 as BW system as it got BW 3.5.. and I am really trying to see the Business Content Cubes like 0PUR_C01,0PUR_C04 etc... and in RSA1>Business Content> Object Types I could see only the Technical Content cubes..(not able to see the SD,MM..etc related cubes)...
And yeah I have R/3 PI installed with 2004_1_490 Version.. and so I could see all the Business Content DataSources in the source system...
Is there one more PI for BW?? or the same as above??
Plz through the light..!
Regards,
Sapster.

Similar Messages

  • How can we find the obsolete data dictionary objects in ecc 6.0 version

    My Question is How can trace the obsolete data dictionary objects in ecc 6.0 version such that we could
    anticipate the obsolete objects before upgradation.
    Regards,
    Raghunadh Babu.

    Hi Raghunadh,
                        The data dictionary objects will be in the repository itself if activated.If the data dictionary objects was created by user and if it is not activated.In this scenarion the data dictionary object can be seen in object navigator.Please check the transaction SE80 and SE81.
    Hope your query resolves.
    Have a best day ahead.

  • How to check the calculation of standard price in ECC.

    Hello All
    I have a datasource 0co_pc_act_05 material valuation prices which  has the standard price. Now I would like to check how this standard price is calculated in ECC ( I mean on what basis it is calculated).
    I have spoke to my Business folks they say it should be (Quantity/per) * Amt.... How can I check the formula of standard price in ECC.
    Thanks
    Yeachni

    This extractor is based on table MBEW and standard price (STPRS) exists in the table. I don't think there is any logic is extracting this.

  • How can I check the version of the rdf file?

    Dear all:
    How can I check the version of the rdf file? such like CEXRECRE.rdf .
    my environment is : oracle 11.5.9
    platform : Linux red hat 4.0
    Regards
    Terry

    Terry,
    Use "adident" or "strings -a" commands -- See (Note: 125922.1 - How To Find Oracle Application File Versions) for details.
    Thanks,
    Hussein

  • How can I check the version of Oracle in Linux?

    Dear all :
    How can I check the version of Oracle in Linux ?
    Regards
    Terry

    Hi terry;
    How can I check the version of Oracle in Linux ?You mean your db version or something else? If you mean you want to control your version issue is:
    source env file as oramgr
    sqlplus "/as sysdba"
    when u login sqlplus it will give u something as below:
    SQL*Plus: Release 10.2.0.4.0 - Production on
    Regard
    Helios

  • ESS MSS BP download location and where can i check the appropriate BP

    Hi Everybody,
    I just want to know the location from where i can download the ESS MSS BP for fresh deployment.
    And also the place where can i check the appropriate BP version for my landscape.
    Also pls let me know the total list of components to be deployed for ESS MSS implementation.
    thanks in advance.
    Regards,
    Ravi

    Hi Ravi
    Try
    service.sap.com/swdc
    Path for downloading XSS files:
    -> SAP Support Packages
    -> Entry by Application Group
      -> SAP Application Components
       -> SAP ERP
        -> SP ERP 6.0 (version dependant)
         -> Entry by component
           -> SAP XSS (Self Services)
    XSS software components:
    SAPESS SAP_ESS 600
    SAPMSS SAP_MSS 600
    SAPPCUIGP SAPPCUI_GP 600
    Path for downloading Business Packages:
    -> SAP Support Packages
      -> Entry by Application Group
       -> SAP Application Components
        -> SAP ERP
         -> SP ERP 6.0 (version dependant)
          ->Entry by component
          -> Portal Content
    Business Packages:
    BP_ERP5ESS 1.0
    BP_ERP5MSS 1.0
    BP_ERP5COM 1.0
    This will vary depending on target versions for example EHPs have a different product path and EHP4 has a different
    location entirely called "Portal Content Self Services"
    For landscape version please see the following notes
    761266 - XSS Self Service Patch Dependancies ERP2004 - follow the stack
    908569 - XSS Dependancies ERP2005
    1359937   EHP4: Further considerations for ESS/MSS         
    1303362   ESS and MSS and Enhancement Packages 1,2,3    
    Or indeed the combinations are listed at www.service.sap.com/scl
    Best wishes
    Stuart

  • How can I check the price of upgrading CS5 educational edition to CS6 educational edition?

    How can I check the price of upgrading
    "Adobe Creative Suite 5 Design Premium Student and Teacher Edition" to
    "Adobe Creative Suite 6 Design & Web Premium Student and Teacher Edition"?
    Accroding to http://www.adobe.com/hk_en/products/cs6/faq.html , "owners of a CS5 or CS5.5 suite edition qualify for upgrade pricing to a CS6 suite edition."
    I can only found the price for CS6 full version from the site. But I can't found the upgrade price. Where can I check the upgrade price?
    Thanks.

    There are no upgrades for edu products. You simply buy a complete new license at the discounted price.
    Mylenium

  • How can i check the planned data vs actual data

    How can i check the planned data vs actual data with the infocubes?

    Hi Srinivas,
    You create one cube for plan data and create another cube for actual data.
    Create a multiprovider and give comparision report. this is betterway.
    Or you can also load actual and plan data in one cube but you need to maintain one character like version to seperate atual and plan data.This is not a good work.
    Regards,
    Vijay.

  • How can i check the realtime ability of my program with LV 6.1?

    Hi, i did use a PXI-6053E daq card with Labview RT 6.0.3, after upgrading to
    LV 6.1 the single scan vi in my control loop displays no error, if i put too
    much stuff in the loop. i check data remaining, everything exactly as in
    the example i attached. With Labview 6.0.3 i did use the opcode "read
    oldest" all the time and got a "1" at data remaining output if runnig too
    slow. How can i check the realtime ability of my Program with LV 6.1? The
    attached example is running with 35kHz and green RT-LED, even if i put a
    "wait 1 ms" in the loop.
    Thx4help.
    Joerg
    [Attachment Optimized HW Timed Loop.llb, see below]
    Attachments:
    Optimized_HW_Timed_Loop.llb ‏242 KB

    You should still be able to use the data remaining output of AI SingleScan to indicate that you are maintaining real-time as you did in LabVIEW 6.0.3. If this is not working properly for you, you might try wiping out the ni-rt folder on the RT system and re-installing the RT software on it through MAX on your host computer. Check the versions you have. If you are still seeing data remaining = 0 even when you are running your loop significantly slower than your scan rate, you might want to contact the LabVIEW RT group at National Instruments for additional assistance.

  • IP Job in BW finished, but how can I check the IDoc receive status in BW ?

    Hi,experts
    After I execute a Infopackage with loading more than 200000 records data, the infopackage monitor show me yellow light, 186020 from 200000 records. this infomation still show me till now, seaval hours,it looks pause here.
    And I check the request in the R/3, the Job has finished. as you know it means the R/3 push the IDoc already finished.
    and how can I do now ? or how can I check the IDoc receive status in BW side?

    Hi,
    I too had the same problem, i executed the following to solve the proble, may be this will help you:
    1) Go to T-code SM58 and select TRFC and press F6,
    2) For manual push of I-Docs, GO to T-COde BD87 select perticular idoc and see the status if it is not executed properly then do the manual push by pressing Execute option,
    Thanks,

  • I have two email accounts. It is only letting me check one. How can I check the other?

    I registered two different email accounts on my iPad mini. It's only letting me check one. How can I check the other one too?

    Congratuations on your new iPad!
    Since your device is so new, I can state categorically that this an issue with configuration. Delete the account that doesn't work, and enter the information anew.
    If you're still having problems, check that your email address and password are correct, and if possible, verify it by checking your ISP's settings.

  • How can i check the office web app server(wac client) is calling custom WOPI host?

    I am getting an error when I testing my wopi host(which is the same as
    example) with Office Web app server "Sorry, there was a problem and we can't open this document.  If this happens again, try opening the document in Microsoft Word."
    1-how can find the log files of this error?
    2-how can i check the office web app server(wac client) is calling my WOPI host?
    I am not sure about cumunication between owa to wopi host. I actually dont know how to implement checkfile and getfile functions to wopi host for waiting for call back from owa client.
    Note:I am sure that office web app server is configured true. Because i test it with sharepoint 2013 and editing and viewing is working well.

    Hi,
    According to your post, my understanding is that
    CheckFileInfo is how the WOPI application gets information about the file and the permissions a user has on the file. It should have a URL that looks like this:
    HTTP://server/<...>/wopi*/files/<id>?access_token=<token>
    While CheckFileInfo provides information about a file, GetFile returns the file itself. It should have a URL that looks like this:
    HTTP://server/<...>/wopi*/files/<id>/contents?access_token=<token>
    There is a great article for your reference.
    http://blogs.msdn.com/b/officedevdocs/archive/2013/03/20/introducing-wopi.aspx
    You can also refer to the following article which is about building an Office Web Apps(OWA) WOPI Host.
    http://blogs.msdn.com/b/scicoria/archive/2013/07/22/building-an-office-web-apps-owa-wopi-host.aspx
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • I have an old gift card from 2 yrs ago, I am wanting to give as a gift, but not sure if it's expired. Can I check the balance w/o putting it on my account?

    I have an old gift card from 2 yrs ago, I am wanting to give as a gift, but not sure if it's expired. Can I check the balance w/o putting it on my account?

    It shouldn't expire - none of my cards have ever had an expiry date on them.
    If the card doesn't have its value written on it then the only way to see its value is to redeem it onto an account.

  • How can I check the expiration date of a Certificate Keychain from terminal?

    Hello, I am writing a bash script to alert me when my corporate certificates are about to expire. How can I check the expiration date of a certificate in keychain? I'm running Mac OS 10.6.8 on a newer MacBook pro with full admin rights.
    Specifically I will be checking three certs: a Root Authority, Issuing Authority, and a user cert (Identity).
    I was exploring the Security and Openssl command line tools. But I can't seem to get the info I need.
    Any recommendations would be appreciated.
    Thank you!

    Anyone?

  • How can I check the specs with a broken LCD?

    A friend just gave me an ibook, but the LCD does not come on. How can I check the specs of the computer?
    I tried hooking it up to an external monitor, but I believe I need to setup the prefs to show on the external (I.E. the external was just black, but the computer was on).
    Any ideas here?
    All I know about the computer is that it's a white ibook with dual USB ports, firewire, and eithernet port on the side.
    Thanks in advance.
    -brown
    Message was edited by: Ryan Brown2

    The specs for the iBook should be on the label with the serial number.
    http://support.apple.com/kb/TA27282?viewlocale=en_US
    What does it say there?

Maybe you are looking for

  • Passing value to bind variable of another table from one table

    hi, I have a multi select table. When one row is selected from this table (no button is clicked, only selection is done), an attribute from that selected row (say userid) should be passed to the bind variable of another table and the corresponding de

  • **Arabic language in Flash**

    Hi guys...... i like designing sites with flash program ..... but not in all things..... Why macromedia dont use the microsoft arabic typing technology ( in IE) the thing that I want to say is: when I select arabic text the letters split when I selec

  • Desperately seeking help for displaying image on button

    i wrote the following method to create and display a button with an icon, doesn't work and i cannot figure out what the problem might be and how to fix it, please help me... clo :)) public static void addButton(Container c, String title, ActionListen

  • Why does siri come on by itself while it sits on the table no one touching it?

    why does siri come on by itself while it sits on the table no one touching it?

  • I can't install open office

    I'm a newbie to MAC, I tried to install openoffice for Yosemite, I clicked on the installer, the download icon jiggled and then nothing happens. Where does the ap show if in fact I did download it correctly? Also how do I delete the files in the dowl