Plzzzz help me

i bought new iphone.but i have a problem during install application.itune software does'nt show apllication sharing file and it did't syc my application.
Can somebody tell me how can i enable the apllication sharing option
Message was edited by: abuzar_200

iTunes > Edit menu > Preferences, check the box for Applications. Connect iPhone, select it in the devices list, click the Applications tab, check the box to sync All or Selected applications, then click Apply to sync.

Similar Messages

I did hold the ALT cmand r key but i cant see the globe i dont know how i can fix my macbook pro late 2008 can any 1 plzzzz help me im very upsate but i live PAKISTAN in here i cant find os x lion disk i dont know what to do if i get the os x lion usb

i did hold the ALT cmand r key but i cant see the globe i dont know how i can fix my macbook pro late 2008 can any 1 plzzzz help me im very upsate but i live PAKISTAN in here i cant find os x lion disk i dont know what to do if i get the os x lion usb

That does not work on model year older then 2010 and really doesn't work on any older then late 2011 models.
You will need a set of original system dvd disc thjat are always sypplied with every mac sold before Lion came out. Systems older then late release early 2011 models.
If you don't have them you kcan order a replacement set from apple by calling them. Have the serial number of you mac handy.

My iPhone is stucked.. Now I can't unlock, Can't switch off.. Plzzzz help me

My iPhone is stucked.. Now I can't unlock, Can't switch off.. Plzzzz help me

Reset, hold both home and power buttons for about 10 seconds until the iPhone begins to restart itself.

TS3694 my iphone no to br restored because an unkhown errer occured (6),,,,,,,,plzzzz help me

my iphone no to br restored because an unkhown errer occured (6),,,,,,,,plzzzz help me at [email protected]

Try to restore it in the iPhone: Settings > General > Restore > Erase All Content and Settings

Updated to ios7 battery is draining plzzzz help me how to fix??????

updated to ios7 battery is draining plzzzz help me how to fix??????

Read this: http://helpios7.com/ios-7-battery-issues/

N86 problem....PLZZZZ HELP!!!!

i have bought this new nokia n86 8mp in jan and have been dealing with problems since then....first of all the colours of the phone crashed and the screen was replaced in 15 days from the date of purchase.,,,,then the colours again crashed and the phone was being replaced just a few days ago.......
One thing more i want to know how i could change the phone settings as the phone keeps on using the gprs.....i have to manually disconnect the access point from the active connections...
somebody plzzzz help me to get rid of this problem

go to settings..>connection..>destinations..>options..>default connection..>Always Ask........when the connection is required then the phone asks for a permission and a message will appear so you will have to choose the right connection
Nokia 5730XM,200.12.87
If my post helped you in anyway,Please click on the (Kudos!) Star, THANK YOU!!

Plz help me how i remove previous id that is stuck in activation process and me not know password and id plzzzz help m,

plz help me how i remove previous id that is stuck in activation process and me not know password and id plzzzz help m

Read this: http://support.apple.com/kb/PH13695
If it is locked with your ID, then re-set the password at https://iforgot.apple.com

I am using iphone 3g 16GB and the upper side of the touch is not working plzzzz help me to resolve the issue

I am using iphone 3g 16GB and the upper side of the touch is not working plzzzz help me to resolve the issue

Thanks for the response Templeton Peck,
New phone...! means the phone will get the replacement or I have to purchase a new one...?
or if I change the touch pad or the touch screen will it not fix the issue...?

Hi ..... i forget my icloud id and i format phone with pc when it turn on it say (activating iphone) now plz plzzzzz help my i get this iphone before 10 days ONLY this is my first time to use iphone plzzzz help

hi ..... i forget my icloud id and i format phone with pc when it turn on it say (activating iphone) now plz plzzzzz help my i get this iphone before 10 days ONLY this is my first time to use iphone plzzzz help

but i already try to remember ,,,,,,,,,,,,, that mean my iphone it will not open again

Can someone modify this program plzzzz help................

hi i am building a small application n i need ur help . I want to take password from console in hidden format.
as i am not a good programmer plzzzz dont advice to use passwordfield or Jpasswordfield or setEcho or setEchoChar as i hav tried it .....as i am taking input from console...... if its possible plzzzzz help me
here is the code
import java.io.*;
class login
     public static void main(String[] args) throws IOException
          String name,password1="",password2="",login1="",login2="";
          char ch12[]=new char[40];
          File f=new File("PASSWORD.txt");
          BufferedReader br=new BufferedReader(new InputStreamReader(System.in));
          if((f.exists())==true)
          System.out.println("Enter User name");
     name=br.readLine();
     System.out.println("ENTER THE PASSWORD");
     password1=br.readLine();
     login1=name+":~"+password1;
          else
System.out.println("WELCOME TO VOS FOR THE TIME PLZ ENTER THE USER NAME N PASSWORD");
System.out.println("Enter User name");
     name=br.readLine();
System.out.println("ENTER THE PASSWORD");
     password1=br.readLine();
System.out.println("plz CONFiRM THE ENTERED PASSWORD");
     password2=br.readLine();
while(!(password1.equals(password2)))
System.out.println("SORRY U HAVE Entered TWO DIFFERENT PASSWORDS");
System.out.println("plz ENTER THE PASSWORD again");
          password1=br.readLine();
System.out.println("plz CONFORM THE ENTERED PASSWORD");
     password2=br.readLine();
login1=name+":~"+password1;
byte ch[]=login1.getBytes();
     FileOutputStream out=new FileOutputStream(f);
     out.write(ch);
     out.close();
System.out.println("USER NAME AND PASSWORD IS SAVED");
     System.out.println("ENTER USERNAME AND PASSWORD TO LOGIN");
     System.out.println("Enter User name");
     name=br.readLine();
     System.out.println("ENTER THE PASSWORD");
     password1=br.readLine();
     login1=name+":~"+password1;
          FileInputStream fis=new FileInputStream(f);
          int x=fis.available();
          for(int i=0;i<x;i++)
          ch12=(char)fis.read();
          login2=login2+ch12[i];
     if(login1.equals(login2))
System.out.println("LOGIN IS SUCCCESSFUL");
else
     System.out.println("INCORRECT USER NAME OR PASSWORD");
do
System.out.println("AUTHENTICATION FAILS");
System.out.println("PLZ ENTER THE USER NAME AGAIN");
     name=br.readLine();
System.out.println("PLZ ENTER THE PASSWORD AGAIN");
password1=br.readLine();
login1=name+":~"+password1;
          if(login1.equals(login2))
System.out.println("LOGIN IS SUCCESSFUL");
          while(!(login1.equals(login2)));
Message was edited by:
omerali0527

You need the latest JDK for this:
http://java.sun.com/javase/6/docs/api/java/io/Console.html
look at the readPassword() method.
Next time please
- use code tags (http://forum.java.sun.com/help.jspa?sec=formatting);
- stop using that silly sms-language (plz = please, u = you, n = and).
Thanks

My ipod touch is stuck on a screen saying i need to plug ipod into itunes and wen do this itunes wont let me on becoz of i password i have on ipod. plzzzz help me

my ipod is stuck on a screen that has a picture of the ipod plug and itunes, wen i plug it in 2 itunes it wont do anything as i have a password on my ipod and i need 2 put in password 4 itunes 2 work, please sum1 help me......................

Try connecting the device to your iTunes library in recovery mode and restoring it. Here are instructions for getting your iPod into recovery mode.
http://support.apple.com/kb/ht1808
B-rock

My ac adapter problem (plzzzz help)

I use my ibook g4 all the time for college work and for general use.
Just recently I tripped on the ac adapter cable it came right out and then the ibook itself fell to the floor (from my bed) and landed on the dc side.
it didnt look that bad until I looked and the "male" part of the ac adapter and it has split slightly, i did the best i can to make the rim of the adapter circular again but everytime I put the adapter inside my ibook it does nothing but the green light and doesn't charge...
I think the tip of the "male" part of the adapter went inside the dc (female) part of my ibook but im not sure..
I just really need to know what I will have to do to get my ibook working again because now it wont charge and it has all my work on it so please please help me out anyway you can any help will be much appreciated, thanks.
ibook Mac OS X (10.4.3)

Hi Yeah,
Welcome to Apple Discussions
I usually focus on new topics in Using iBook G4 and not the others. I miss the recent posts box because then I could answer from all categories. Anyways you need to be careful with the DC-in board "female" plug. The same thing happened to my G3 iBook, which was a real bummer. What can happen is the DC-in board's plug can shift inside of the case. Eventually it may malfunction because of the shifting, which means you can't power your computer anymore. The thing to watch out for is with the new adapter's "male" plug doesn't start to split like the last one. This means that you have to probably/eventually replace the DC-in Board. If you can't charge your iBook, bring it to an Apple Store and have a Mac genius take a look. What they told me was that they wanted to replace the whole logic board instead of the DC-in Board ($750+). I guessed it would end up like that so I replaced it myself. Here is a guide on how to do it, just incase all else fails. Also at PBFixit.com you can get parts for you iBook. The DC-in Board is pretty cheap.
I hope that helps,
Jon
PS For future reference, you can get a power adapter Here

DBAdapter issue plzzzz help me

Hi
can i Implement the below query with DBAdapter Wizard ..... i know we cannot implement with Custom SQL..... with DBAdapter wizard i can implement to certain extent. How can we implement this condition trunc(cii.active_end_date) <= trunc(sysdate) and this clause IN ('HZ_PARTY_SITES','HZ_LOCATIONS','VENDOR_SITES', 'INTERNAL_SITE') and this clause msi.organization_id = cs_std.get_item_valdn_orgzn_id
anyone plzzz help me its urgent...................
thanks in advance
SELECT cii.serial_number, cii.instance_id, cii.instance_number, msi.inventory_item_id, msi.concatenated_segments, msi.description, msi.primary_unit_of_measure, msi.primary_uom_code, 1 quantity FROM csi_item_instances cii, mtl_system_items_kfv msi WHERE cii.owner_party_source_table = 'HZ_PARTIES' AND cii.serial_number is not null AND cii.inventory_item_id = msi.inventory_item_id AND (cii.location_type_code IN ('HZ_PARTY_SITES','HZ_LOCATIONS','VENDOR_SITES', 'INTERNAL_SITE') OR ( cii.location_type_code = 'INVENTORY' and trunc(cii.active_end_date) <= trunc(sysdate)) ) AND msi.enabled_flag = 'Y' AND msi.contract_item_type_code IS NULL AND msi.serv_req_enabled_code = 'E' AND msi.serial_number_control_code <> 1 AND msi.organization_id = cs_std.get_item_valdn_orgzn_id AND trunc(SYSDATE) BETWEEN trunc(NVL(msi.start_date_active,SYSDATE)) AND trunc(NVL(msi.end_date_active,SYSDATE)) UNION SELECT msn.serial_number, to_number(null) instance_id, null instance_number, msi.inventory_item_id, msi.concatenated_segments, msi.description, msi.primary_unit_of_measure, msi.primary_uom_code, 1 quantity FROM mtl_serial_numbers msn, mtl_system_items_kfv msi WHERE msn.current_organization_id = cs_std.get_item_valdn_orgzn_id AND msn.inventory_item_id = msi.inventory_item_id AND msn.current_organization_id = msi.organization_id AND nvl(msi.comms_nl_trackable_flag, 'N') = 'N' AND msi.serial_number_control_code <> 1 AND msi.serv_req_enabled_code = 'E' AND msi.enabled_flag = 'Y' AND msi.contract_item_type_code IS NULL AND msn.current_status = 4 AND trunc(SYSDATE) BETWEEN trunc(NVL(msi.start_date_active,SYSDATE)) AND trunc(NVL(msi.end_date_active,SYSDATE))

Hi,
Can you try the sql listed below and tell me if it gives the intended results:- (Other Option would be one can write complex SQL and get the results in a collection in PL/SQL procedure)
SELECT cii.serial_number,
cii.instance_id,
cii.instance_number,
msi.inventory_item_id,
msi.concatenated_segments,
msi.description,
msi.primary_unit_of_measure,
msi.primary_uom_code,
1 quantity
FROM csi_item_instances cii,
mtl_system_items_kfv msi
WHERE cii.owner_party_source_table = 'HZ_PARTIES'
AND cii.serial_number IS NOT NULL
AND cii.inventory_item_id = msi.inventory_item_id
AND (cii.location_type_code IN ('HZ_PARTY_SITES','HZ_LOCATIONS','VENDOR_SITES', 'INTERNAL_SITE')
OR ( cii.location_type_code = 'INVENTORY'
AND TRUNC(cii.active_end_date) <= TRUNC(sysdate)) )
AND msi.enabled_flag = 'Y'
AND msi.contract_item_type_code IS NULL
AND msi.serv_req_enabled_code = 'E'
AND msi.serial_number_control_code <> 1
AND msi.organization_id = cs_std.get_item_valdn_orgzn_id
AND TRUNC(SYSDATE) BETWEEN TRUNC(NVL(msi.start_date_active,SYSDATE)) AND TRUNC(NVL(msi.end_date_active,SYSDATE))
UNION
SELECT msn.serial_number,
to_number(NULL) instance_id,
NULL instance_number,
msi.inventory_item_id,
msi.concatenated_segments,
msi.description,
msi.primary_unit_of_measure,
msi.primary_uom_code,
1 quantity
FROM mtl_serial_numbers msn,
mtl_system_items_kfv msi
WHERE msn.current_organization_id = cs_std.get_item_valdn_orgzn_id
AND msn.inventory_item_id = msi.inventory_item_id
AND msn.current_organization_id = msi.organization_id
AND NVL(msi.comms_nl_trackable_flag, 'N') = 'N'
AND msi.serial_number_control_code = 1
AND msi.serv_req_enabled_code = 'E'
AND msi.enabled_flag = 'Y'
AND msi.contract_item_type_code IS NULL
AND msn.current_status = 4
AND TRUNC(SYSDATE) BETWEEN TRUNC(NVL(msi.start_date_active,SYSDATE)) AND TRUNC(NVL(msi.end_date_active,SYSDATE))
Regards,
Birender

Plzzzz help me thru this

I have an application that contains:
an Access-database and a GUI that displays the values of the database.
Now I want to refresh the display after every 10 minutes. How can I do that? Can anybody help me ASAP.

you could create a runnable method that refreshes the display continuously. Assign it to a thread. After every time it is done refreshing, put the thread to sleep for 10 minutes. Using threads is covered in the online tutorial... if you aren't inclined to read that, say so

Plzzzz help me with this :(

i have this project but i didnot how to complete it >>
plz help me
Write a program to manage assigned course to students.
The number of sections is unknown, and might change from a term to another.
We assume that each student is recognized by his name and ID, and may receive a grade for a specific course.
We also assume that each course has a name, an ID, and section name.
Using a list of classes, and a list of students in the same class,
-     Register a new student to a new course
-     Add a new course,
-     Delete a course,
-     Remove a student from a course
-     Print all students in a course,
-     Print all courses associated to some student,
-     Assign a grade to a student
and this is my soulation
public class project {
     public class Node {
          private int id;
          private int Cnum;
          Node nexts;
          Node nextc;
          public Node( int sno, int cno,Node n,Node n2)
          id=sno;
          Cnum=cno;
          nexts=n;
          nextc=n2;
          public Node()
               id=0;
               Cnum=0;
               nexts= null;
               nextc=null;
//     student will add or drop courses
     public class section {
          //private Node head;
          //private Node tail;
          private String sectionName; //name of the section
          private String inst; // instructor name
          private int Snum; //section number
          SinglyLinkedList students; //object of class singly link list
          public section(String instructor ,String course,int snum)
               inst=instructor;
               sectionName=course;
               Snum=snum;
               students =new SinglyLinkedList() ;
          public void addToHead(int sid, int snum)
     if (students.head ==null)
          {students.head=students.tail=new Node(sid,snum,null,null); }
               else
                    students.tail.nexts=new Node(sid,snum,null,null);
          public void deleteStudent( int sid, int snum)//delete using student section number
          if (students.head==null) return;
          else
          { // if not empty list
               if ((students.head == students.tail) && (sid == students.head.id))
               { // if only one node in the list
               students.head = students.tail = null; // and el is the head
          else if (sid == students.head.id) { // if more than one node in the list and el is head
               students.head = students.head.nexts;
          else
          { // search for el starting at head, ending at tail
          Node pred;Node tmp;
          for (pred = students.head, tmp = students.head.nexts; (tmp != null) && !(tmp.id == sid);pred = pred.nexts, tmp= tmp.nexts);
          if (tmp != null)
          pred.nexts = tmp.nexts;
               if (tmp == students.tail)
                    students.tail = pred;
//courses will be added or drop from student
public class student {
     //private Node head;
     //private Node tail;
     private String lastName;
     private String firstName;
     private String grade;
     private int id;
     SinglyLinkedList sections;
     public student(String fn,String ln,int idnum)
          lastName=ln;
          firstName=fn;
          id=idnum;
          grade=null;
          sections =new SinglyLinkedList() ;
     public void addToHead(int sid, int snum) //add section to the student
if ((sections.head == null) && (sections.tail == null))
     sections.head = sections.tail = new Node(sid,snum,null,null);
else
     head = new Node(ln,fn,no,head);
sections.head = sections.tail = new Node(sid,snum,students.head,sections.head);
     public class SinglyLinkedList {
          public student[] s=new student[2000];
          public section[] sc=new section[200];
          public Node head;
          public Node tail;
          public SinglyLinkedList() //set head & tail to null
               head = tail = null;
          public boolean checkS()
          public linked()
               for(int i=0;i<2000;i++)
                    s=new student;
               for(int j=0;j<2000;j++)
                    sc[i]=new section;

hlover wrote:
i have this project but i didnot how to complete it >>
plz help me
...Could you ask a specific question about some piece of code you're working on? A description like "I don't know how to complete it" does not tell me very much.
Oh, and please use proper spelling and grammar: this is not a chat board. Thanks.

Interface problem!! PLZZZZ help!

Hi,
dis problem is probably gna make me look really stupid but i jus cnt seem to work it out. Basically, im tryin to implement my system to use rmi. I wrote my rmi interface class, and compiled it. No problem. Then i wrote my rmi server class which implements the interface. But when i try to compile the server, i get an error sayin "cannot resolve symbol" which is refering to my interface. Im totally clueless as to why this is happening. PLZZZZZZZ could some1 gimme some input.
The interface is called GamesDB.java. The server class is GamesDBImpl.java. The error occurs on this line in my server class:
public class GamesDBImpl extends UnicastRemoteObject implements GamesDB
sayin that it cannot resolve the symbol GamesDB. Please help!! Thanks in advance!!

Isn't there an issue (or more correctly something
fixed) in the new 1.4 that means classes in the same
package are no longer found without explicitly
importing them?
Barring that, is the interface in another package, in
which case it definitely needs to be imported?
Does your interface extend Remote?
Is your classpath set up correctly?
Just some quick thoughts.Have never used 1.4 yet but if apparently that seems to be the only problem. Try using import statement.

Plzzzz help me

Similar Messages

Maybe you are looking for