%PM-4-ERR_DISABLE: loopback error detected on Gi0/2

Dear Sir,
I have config. new cisco 2960 se Swtich on our LAN that is connected with another cisco switch with trunk with crass cable.
backbone link is down frequtly since i have installed it on network follwing Eror has shown in log
May 20 15:03:17.223 India: %ETHCNTR-3-LOOP_BACK_DETECTED: Loop-back detected on
GigabitEthernet0/2.
May 20 15:03:17.223 India: %PM-4-ERR_DISABLE: loopback error detected on Gi0/2,
putting Gi0/2 in err-disable state
May 20 15:03:18.229 India: %LINEPROTO-5-UPDOWN: Line protocol on Interface Gigab
itEthernet0/2, changed state to down
Can any body tell me whts prob.
and one more prob..
follwing cmd is automatically configured on new switch
crypto pki trustpoint TP-self-signed-1076337536
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1076337536
revocation-check none
rsakeypair TP-self-signed-1076337536
crypto pki certificate chain TP-self-signed-1076337536
certificate self-signed 01
3082023F 308201A8 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31303736 33333735 3336301E 170D3933 30333031 30303030
35305A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 30373633
33373533 3630819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100AEE1 20B64C5B 4F831F44 AE90A8B7 5C60D1B1 4662B4B3 36865A3E 43F974F1
9DA7521E 692A4F13 4F447483 868A0448 322006CA AA404B31 5ED05776 76BCC3A0
0C15BF47 2176F5AC EAFB06E4 D8F49BB1 0A999AAE F3922648 63447BEC D31E1359
4F8565C6 1CF5A066 7F9D43F3 F8E5FA3B 380AF1CB F5E630D5 53A921E2 E62A3560
176B0203 010001A3 67306530 0F060355 1D130101 FF040530 030101FF 30120603
551D1104 0B300982 07535732 5F47462E 301F0603 551D2304 18301680 145041F9
C03F664F A1090118 0837DC12 90761ED4 F6301D06 03551D0E 04160414 5041F9C0
3F664FA1 09011808 37DC1290 761ED4F6 300D0609 2A864886 F70D0101 04050003
81810018 76970781 17981390 979FBA1E 9CA904AF 5050BAF1 5F2EE233 FACF7C69
F57CE8F2 B1EF224F 126A3EB9 5A797456 00C11FA8 86E43C25 D74C0EB2 AF8A5EE7
D45F14E7 C75FCA25 14250CFB A28507A1 66617E60 761A4F68 F1E9DD15 29B3D6FE
32AC4BBE 887687CE 890D67F5 2BE050F8 CAAC237A 50177347 DB3E2C16 65FD0AEE 66490A
quit
wht is this?????????????? and how do i remove it......
Thanks in adv...
Tom

Hi Tom
       Following is taken from a Cisco document and you might find this useful.
     A loopback error occurs when the keepalive packet is looped back to the port that sent the keepalive.
     The switch sends keepalives out all the interfaces by default. A device can loop the packets back to the source interface, which usually occurs because there is a logical loop in the network that the spanning tree has not blocked. The source interface receives the keepalive packet that it sent out, and the switch disables the interface (errdisable). This message occurs because the keepalive packet is looped back to the port that sent the keepalive:
%PM-4-ERR_DISABLE: loopback error detected on Gi4/1, putting Gi4/1 in
err-disable state
        Keepalives are sent on all interfaces by default in Cisco IOS Software Release 12.1EA-based software.
         In Cisco IOS Software Release 12.2SE-based software and later, keepalives are not sent by default on fiber and uplink interfaces.
         The suggested workaround is to disable keepalives and upgrade to Cisco IOS Software Release 12.2SE or later.
       Reference : http://www.cisco.com/en/US/tech/tk389/tk621/technologies_tech_note09186a00806cd87b.shtml
Hope this helps
Happy Networking!!!!
Regards
Narendrakumar B

Similar Messages

%PM-4-ERR_DISABLE: loopback error detected

ETHCNTR-3-LOOP_BACK_DETECTED: Keepalive packet loop-back detected on FastEthernet0/23.
%PM-4-ERR_DISABLE: loopback error detected on Fa0/23, putting Fa0/23 in err-disable state
Information:
1. swith 3550(f0/23,trunk,up-SW) link to 3550(f0/23,trunk,down-sw)
2. disable port is not used.
3. port used(connect to cisco router,cisco switch,IPS,log server,ibm router,sniffer)
4. IOS (C3550-I9Q3L2-M), Version 12.1(14)EA1a
How to check where 's loopback port problem?

Hi Friend,
Also if changing the cable did not resolve the issue then there may be a STP loop in you network.
The problem occurs because the keepalive packet is looped back to the port that sent the keepalive. Keepalives are sent on the Catalyst switches in order to prevent loops in the network. Keepalives are enabled by default on all interfaces. You see this problem on the device that detects and breaks the loop, but not on the device that causes the loop.
Workaround will be to issue the "no keepalive" interface command in order to disable keepalives. A disablement of the keepalive prevents errdisablement of the interface, but it does not remove the loop.
To remove the loop you may have to trace the cables and switches and find out that out.
Regards,
Ankur

Power Controller reports power Imax error detected

Hi,
My 3560 switch w/ IOS 12.2(35)SE have below message last night. Would anyone know what happen?
Sep 23 18:54:58.468 UTC: %ILPOWER-7-DETECT: Interface Fa0/10: Power Device dete
ted: IEEE PD
Sep 23 18:54:58.468 UTC: %ILPOWER-5-INVALID_IEEE_CLASS: Interface Fa0/10: has d
tected invalid IEEE class: 7 device. Power denied
Sep 23 18:57:37.542 UTC: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error,
Interface Fa0/12: Power Controller reports power Imax error detected
Sep 23 18:57:44.580 UTC: %SWITCH_QOS_TB-5-TRUST_DEVICE_LOST: cisco-phone no lon
er detected on port Fa0/12, port set to untrusted.
Sep 23 18:57:48.674 UTC: %ILPOWER-7-DETECT: Interface Fa0/12: Power Device deteted: Cisco PD
Sep 23 18:57:48.741 UTC: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Fa0/12: Power Controller reports power Tstart error detected
Thanks and Regards
Ernest

Hi Leo
Thank you for your quick response but as I said before that Nortel IP phnoe has a designed fault in power module so it meant to fail and cisco switch generate syslog for this Power Controller reports power Imax error detected. Once we replace with new phone, the error disappear and works all fine.
Now the solution I am looking for this issue as follows:
While the faulty IP phone still pluged in and keep booting, the switch generate error log and our syslog server keep sending out email alert until one of our engineer log into switch and shut the port. Very often if this happen in weekend or at night then we get hundreds of email.
Therfore I think it would be nice if Cisco 3750 put this swithport into errdisable state but it's not happening.
This is the output of errdisable;
#sh errdisable detect
ErrDisable Reason            Detection    Mode
arp-inspection               Enabled      port
bpduguard                    Enabled      port
channel-misconfig (STP)      Enabled      port
community-limit              Enabled      port
dhcp-rate-limit              Enabled      port
dtp-flap                     Enabled      port
gbic-invalid                 Enabled      port
inline-power                 Enabled      port
invalid-policy               Enabled      port
l2ptguard                    Enabled      port
link-flap                    Enabled      port
loopback                     Enabled      port
lsgroup                      Enabled      port
mac-limit                    Enabled      port
pagp-flap                    Enabled      port
port-mode-failure            Enabled      port
pppoe-ia-rate-limit          Enabled      port
psecure-violation            Enabled      port/vlan
security-violation           Enabled      port
sfp-config-mismatch          Enabled      port
small-frame                  Enabled      port
storm-control                Enabled      port
udld                         Enabled      port
vmps                         Enabled      port
===========================================
Another thing that this command "power inline port 2x-mode" is not available in our IOS, I am not sure how this command will help.
Look forward for someone response.
Thank you all.

Berkeley db fatal region error detected run recovery

Hi,
I have initiated d Berkeley DB object.
Then, I am using multithreading to put data into the DB.
Here is how I open the one data handler.
ret = dbp->open(dbp, /* Pointer to the database */
NULL, /* Txn pointer */
db_file_name, /* File name */
db_logical_name , /* Logical db name (unneeded) */
DB_BTREE, /* Database type (using btree) */
DB_CREATE, /* Open flags */
0644); /* File mode. Using defaults */
each threads would put data into the same handler when it needs to.
I am getting "berkeley db fatal region error detected run recovery".
What is the problem? Does it have anything to do with the way the handler is created or whether multiple threads can put data into the DB?
jb

Hi jb,
user8712854 wrote:
I am getting "berkeley db fatal region error detected run recovery".This is a generic Berkeley DB panic message that means something went wrong. When do you get this error? Did you enable the verbose error messages? Are there any other warning/error messages reported? By just posting the way you open the database doesn't help much at all. I reviewed the other questions you asked on the forum, and it seems that you are not following the advices and consult the documentation, but you prefer to open new threads. I advice you to first work on configuring Berkeley DB for your needs and read the following pages in order to understand which Berkeley DB Product best suits your application and how it should be configured for a multithreaded application:
[The Berkeley DB products|http://www.oracle.com/technology/documentation/berkeley-db/db/ref/intro/products.html]
[Concurrent Data Store introduction|http://www.oracle.com/technology/documentation/berkeley-db/db/ref/cam/intro.html]
[Multithreaded applications|http://www.oracle.com/technology/documentation/berkeley-db/db/ref/program/mt.html]
[Berkeley DB handles|http://www.oracle.com/technology/documentation/berkeley-db/db/ref/program/scope.html]
On the other hand, if the code that's calling the Berkeley DB APIs is not too big and is not private, you can post it here so we can review it for you and let you know what's wrong with it.
The procedures you should follow in order to fix a "run recovery" error are described here:
[Recovery procedures|http://www.oracle.com/technology/documentation/berkeley-db/db/ref/transapp/recovery.html]
Thanks,
Bogdan Coman

Error Detected by export DLL for pdf

Post Author: netonomous
CA Forum: Exporting
We have a Win 2000 box with this feature working with no problem.
I am getting an error exporting to .PDF when using .NET 2 Business Objects. Quite the opposite of your situation. Any ideas? My temp folder is under C:\Windows\Temp and the error I receive is
Error in File C:\WINDOWS\TEMP\TSRDetail {F7EAB0D7-408F-4787-A1FE-5086F7199CB9}.rpt: Error detected by export DLL: This is on a Win 2003 box Service Pack 1 with IIS 6.0 with ASP.NET Framework for Crystal using an Oracle Database. Excel exports work ok.
Thanks much in advance.

Post Author: netonomous
CA Forum: Exporting
We have a Win 2000 box with this feature working with no problem.
I am getting an error exporting to .PDF when using .NET 2 Business Objects. Quite the opposite of your situation. Any ideas? My temp folder is under C:\Windows\Temp and the error I receive is
Error in File C:\WINDOWS\TEMP\TSRDetail {F7EAB0D7-408F-4787-A1FE-5086F7199CB9}.rpt: Error detected by export DLL: This is on a Win 2003 box Service Pack 1 with IIS 6.0 with ASP.NET Framework for Crystal using an Oracle Database. Excel exports work ok.
Thanks much in advance.

Error message when updating Hyperion Planning database "Errors Detected 13"

I am running into a problem while running a Full Update of our Planning database using the Planning Desktop.
It goes through the update on the first database, but as soon as the update starts on the second database I get an error message that just says "*Errors Detected 13*"
What does this mean? Can not find documentation on this?
We are on 9.2.0.2

Thanks Sunil
but the problem was solved, it was an hardware failure, but now I am monitoring the database performance.
Kind regards.

Potential Windows Update database error detected 0x80070490

This is the response I get when I run the Windows update troubleshooter from the Windows 8.1 Action Center. If I click next it reports the errors have been fixed. However if I run it again it reports exactly the same errors.
After searching the Internet I have found that several users have reported having this issue. As result of the aforementioned search I have tried the following:
1) Run the Fixit tool for Windows 8.1 located at:
http://support.microsoft.com/kb/971058/en-us.
2) Run the System Update Readiness commands: DISM.exe /Online /Cleanup-image /Scanhealth and DISM.exe /Online /Cleanup-image /Restorehealth located at:
http://support.microsoft.com/kb/947821/en-us.
3) Saved contents of C:\Windows\System32\catroot2 to a temp folder and then deleted contents of C:\Windows\System32\catroot2.
4)Renamed C:\Windows\SoftwareDistribution to C:\Windows\SoftwareDistribution.old
5) Restarted Windows 8.1.
6) Verified that C:\Windows\System32\catroot2 and that C:Windows\SoftwareDistribution folders had been rebuilt.
7) I then ran the Windows update troubleshooter from the Window 8.1 Action Center again and got the same response as listed above. The errors still exist and are not fixed.
8) Finally, I downloaded Windows 8.1 Enterprise Evaluation and I did a completely new clean install of Windows 8.1 and without installing anything else (no updates, no software, no antivirus) the above errors appeared within minutes after connecting
to the internet. I checked using the Windows update troubleshooter several times before connecting to the Internet and each time no problems were found, but shortly after I connected the above errors are shown to exists.
Any suggestions that will help fix this issue will be of great help.

Did anyone ever find an actual fix for this problem? I have a very similar problem. I have gone through the same steps for fixing my issues with getting a message of problems found every time I run the Windows Update troubleshooter. It
continually finds what it says are Potential Windows Update Database error detected 0x800700D and says they are fixed, along with another message saying Windows Update components must be repaired and it says they are fixed as well. However, each time
I run the troubleshooter it finds the same issues. I have no problems running Windows Update under Windows 8.1 and them all installing without issue, yet I can't download or update ANY apps within the MS store and like the problem above, when it looks
for my apps it says it's having problems finding them and to try later. If I try to download even a free app, I get an error message that something happened and your purchase can't be completed. Error code: 0x80096004.
I have dug through everything I can find on this error message and tried changing my sign in on my laptop to a local account, created a new MS account to access the store and continue to get the same error message. I have tried it with my Kaspersky
Internet Security 2015 turned completely off. I've also ran SFC scannow and there are no errors and have ran DISM which found a problem but says it was fixed. After running it again, there were no errors. I have no other problems with anything
else (that I know of on my machine). It is an Asus Q400A and came with Windows 8.0. I ran all the updates and then upgraded to 8.1 through the MS store without issue. I have installed all updates since upgrading to 8.1 and have absolutely
no problem running ANY updates, but can't seem to access the store no matter what I try.
If anyone has found a solution to this I'd appreciate your input. Hard to believe MS would put out a product that has such a basic problem that has affected so many users and can't seem to come up with some resolution that doesn't require registry
editing, running commands from elevated command prompts, and a CS degree to resolve--there are soooo many issues online regarding this kind of error and others related to running SFC and DISM...most ending up in their ultimate default answer....renew or reinstall
Windows and all the updates....which still doesn't resolve the problem for many! I've always been a PC guy, but I'm starting to like the MacBook Pro I picked for work related reasons with great hesitation. I've wasted more time chasing this issue
down than I all the time I've spent actually using the Mac without even a hitch!
Thx in advance for any feedback....please no MAC blasting....at this point, it would be not well received!!

File permission error; NI-488: DMA hardware error detected

I'm running LabVIEW 8.0 on the latest supported SUSE linux. My vi saves a data file. If I save a file named "/home/bill/LabVIEW/data/file.dat," it saves okay the first time. But then if I run the program again, it gives me an error instead of just writing over file.dat (which is what I want it to do).
Error 8 occurred at Open/Create/Replace File in filename.vi
Possible reason(s):
LabVIEW: File permission error.
NI-488: DMA hardware error detected.
Also, I don't know if this is related, but when I click on the folder icon to the right of the file path on the front panel, and navigate to the directory mentioned above, then type "file.dat," I get the message "/home/bill/LabVIEW/data/file.dat does not exist." Shouldn't this *create* the new file?
Thanks,
Bill

You should really start your own thread describing your problem in detail. One of the issues here is that there are two possible sources for the error code 8. Which one is applicable to you? What platform are you on? What version of LV? What are you trying to accomplish? What exactly triggers the error?
Please start again with your own thread and with the answers the questions I asked (as well as anything else that you think might be of value).
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Incorrect Page Size or Orientation Error Detected in Live Preflight

Wednesday, November 10, 2010 12:16:40 PM PST
I am trying to prepare a newsletter created in Adobe InDesign to send to a Printer in Germany. This is the first time I'm sending a document to press since moving to Germany last February and the first time since upgrading my computer and software to:
MacBookPro: Model 5,3
Adobe InDesign: ver. 6.0.6
Adobe Acrobat Pro: ver. 9.4.0
The standard paper size in Europe is "A4" , slightly larger than our "Letter" size. Document was set up an "A4" document size. A4 is also selected on the Print menu.
Live Preflight shows "incorrect page size or orientation" and says:
Required: 612 pt. x 792 pt.
Current: 595.276 pt. x 841.89 pt.
Fix: Choose File/ Document Setup to specified required page size.
I tried changing the document setup to the "required" 612 x 792, and the document was squeezed into the smaller space, ruining the document formatting! I undid the damage and looked further for the incorrect preference setting.
There is a wrong setting somewhere, but I can't find it.
Distiller is rejecting the document and won't generate a PDF. The only other errors detected in Preflight were RGB color space issues.
All settings in InDesign Preferences, Print Menu and PDF generator are set for the size A4, yet Preflight insists that the Document
Size and Orientation are incorrect and suggests changing the size to 612 pt. x 792 pt.
I also noted that when setting up the PDF, I did not check "Optimized for Fast Web Viewing," yet when I generated the PDF, it "Optimized for Fast Web Viewing." It seems that there is some preference somewhere that is overriding my selections. But where....?!
I was able to generate a PDF from InDesign (without going through Distiller) and the printer was able to use the PDF. I was taught to always use Distiller when submitting files to printers, and to "package" the files. Is there some risk in sending files without using Distiller?
In addition to the page size/orientation issue, Europe has different standards for color space and printers' ink also. If anyone could shed some light on how I should adapt to European standards, I would be grateful.
I was disappointed that Adobe offered only paid support, although I purchased Adobe CS4 less than a year ago. For such an expensive
product, I would think free support would be available for at a minimum one year.

Yes, Preflight was looking for letter size and created a conflict with my page size/orientation selections in the document setup and print setup.
No, this didn't resolve the problem keeping Distiller from making my PDF.
Here is the message Distiller gave when it rejected the file:
Distilling: 12_REVISTA_INFORMATIVA_07.indd
Start Time: Saturday, November 13, 2010 at 6:36 PM
Source: /Users/bethshaw/Desktop/DOEBRICH NEWSLETTER/12_DESIGN/12_REVISTA_INFORMATIVA_07.indd
Destination: /Users/bethshaw/Desktop/DOEBRICH NEWSLETTER/12_DESIGN/12_REVISTA_INFORMATIVA_07.pdf
Adobe PDF Settings: /Library/Application Support/Adobe/Adobe PDF/Settings/Standard.joboptions
%%[ Error: undefined; OffendingCommand: Ìıÿ FÂΩ1ÔÁ˛t∑ DOCUMENT p ]%%
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
Distill Time: 7 seconds (00:00:07)
**** End of Job ****
Does every criterion set in Preflight have to be fulfilled for Distiller to work? How do I isolate the problem keeping the PDF from being created?

ORA-30966: error detected in the XML Index layer

Dear all,
after upgrading from 9.2.0.8 to 11.2.0.1, Autoconfig ended with error:
Alert log file shows :
Mon Jul 04 21:33:50 2011
Errors in file /ebiz/oracle/diag/rdbms/vision/VISION/trace/VISION_ora_31642.trc (incident=16196):
+ORA-00600: internal error code, arguments: [kzxcInitLoadLocal-7], [64131], [ORA-64131: XMLIndex Metadata: failure during the looking up of the dictionary+
+ORA-30966: error detected in the XML Index layer+
+ORA-31011: XML parsing failed+
+ORA-01403: no data found+
+], [], [], [], [], [], [], [], [], []+
ORA-01403: no data found
Incident details in: /ebiz/oracle/diag/rdbms/vision/VISION/incident/incdir_16196/VISION_ora_31642_i16196.trc
Mon Jul 04 21:48:25 2011
Incremental checkpoint up to RBA [0x3b2.a445.0], current log tail at RBA [0x3b2.a447.0]
Mon Jul 04 21:49:25 2011
Errors in file /ebiz/oracle/diag/rdbms/vision/VISION/trace/VISION_ora_330.trc (incident=16206):
+ORA-00600: internal error code, arguments: [kzxcInitLoadLocal-7], [64131], [ORA-64131: XMLIndex Metadata: failure during the looking up of the dictionary+
+ORA-30966: error detected in the XML Index layer+
+ORA-31011: XML parsing failed+
for ORA-30966 i found one metalink document
Bug 9496480: XDB VIEWS INVALIDATED AFTER RUNNING CATUPGRD.SQL UPGRADING 9.2.0.8.0 TO 11.2.0.1I am not able to understand this bug detail, can some one help me to understand this BUG 9496480. Is it possible to run autoconfig ?RegardsHAMEED

This the result shows that ORACLE REAL APPLICATION CLUSTERS status is "INVALID" but we dont have any RAC configuration.!!!
SQL> select COMP_NAME,VERSION,STATUS from dba_registry;
COMP_NAME VERSION STATUS
Oracle Database Catalog Views 11.2.0.1.0 VALID
Oracle Database Packages and Types 11.2.0.1.0 VALID
Oracle Real Application Clusters 11.2.0.1.0 INVALID
JServer JAVA Virtual Machine 11.2.0.1.0 VALID
Oracle XDK 11.2.0.1.0 VALID
Oracle Database Java Packages 11.2.0.1.0 VALID
Oracle Multimedia 11.2.0.1.0 VALID
Spatial 11.2.0.1.0 VALID
Oracle Text 11.2.0.1.0 VALID
OLAP Analytic Workspace 11.2.0.1.0 VALID
Oracle OLAP API 11.2.0.1.0 VALID
OLAP Catalog 11.2.0.1.0 VALID
Oracle Data Mining 11.2.0.1.0 VALID
Oracle XML Database 11.2.0.1.0 VALID
14 rows selected.Kindly let me know what is the otherway !
Regards
HAMEED

Help with Error: PANIC: fatal region error detected; run recovery

Here's what I'm trying to do:
I am trying to us BDBXML in a webapp using tomcat 5.5. I have a class that is responsible for opening and closing the db. This class is accessed by a servlet for some AJAX RCP stuff and it also serves as an access point for a Web Service (Apache Axis). This class looks like this:
public class DG implements Serializable {
private javax.xml.datatype.DatatypeFactory datatypeFactory;
private Environment environment;
private EnvironmentConfig environmentConf;
private XmlContainer xmlContainer = null;
private XmlManager xmlManager = null;
private XmlManagerConfig xmlManagerConfig;
public DG() {
try {
File envHome = new File("C:\\bdbxml\\database");
environmentConf = new EnvironmentConfig();
environmentConf.setAllowCreate(true);
environmentConf.setInitializeCache(true);
environmentConf.setInitializeLocking(true);
environmentConf.setInitializeLogging(true);
environmentConf.setRunRecovery(true);
environmentConf.setTransactional(true);
environmentConf.setLockDetectMode(LockDetectMode.MINWRITE);
     //tried the following with default and 10000
     environmentConf.setMaxLockers(100000);
environmentConf.setMaxLockObjects(100000);
environmentConf.setMaxLocks(100000);
environmentConf.setTxnMaxActive(100000);
environment = new Environment(envHome, environmentConf);
CheckpointConfig cpc = new CheckpointConfig();
cpc.setKBytes(500);
environment.checkpoint(cpc);
xmlManagerConfig = new XmlManagerConfig();
xmlManagerConfig.setAdoptEnvironment(true);
xmlManager = new XmlManager(environment, xmlManagerConfig);
XmlContainerConfig xmlContainerConfig = new XmlContainerConfig();
xmlContainerConfig.setIndexNodes(true);
xmlContainerConfig.setTransactional(true);
xmlContainerConfig.setNodeContainer(true);
xmlContainer = xmlManager.openContainer("container.dbxml", xmlContainerConfig);
xmlContainer.sync();
datatypeFactory = javax.xml.datatype.DatatypeFactory.newInstance();
} catch (FileNotFoundException e) {
     e.printStackTrace();
} catch (DatabaseException e) {
     e.printStackTrace();
} catch (DatatypeConfigurationException e) {
     e.printStackTrace();
public void close() {
try {
if (xmlContainer != null) {
xmlContainer.close();
if (xmlManager != null) {
xmlManager.close();
} catch (DatabaseException e) {
e.printStackTrace();
public String getDocument(String docId) {
try {
XmlDocument doc = xmlContainer.getDocument(docId);
String docString = doc.getContentAsString();
doc.delete();
return docString;
} catch (XmlException e) {
e.printStackTrace();
public Result[] search(Search search) {
try {
     //normally I construct the query string using the Search object
StringBuffer q = new StringBuffer("subsequence(collection('container.dbxml')/metadata[contains(./idinfo//title, 'Ecology')], 1,10)");
XmlQueryContext xqc = xmlManager.createQueryContext();
XmlQueryExpression xqe = xmlManager.prepare(q.toString(), xqc);
XmlResults xr = xqe.execute(xqc);
int i = 0;
Vector<Result> vec = new Vector<Result>();
while (xr.hasNext()) {
XmlValue xv = xr.next();
XmlDocument xd = xv.asDocument();
Result r = new Result();
r.setMetadata(xd.getContentAsString());
r.setDocumentId(xd.getName());
XmlValue groupVal = new XmlValue(XmlValue.STRING);
xd.getMetaData("", "group", groupVal);
r.setGroup(groupVal.asString());
XmlValue ownerVal = new XmlValue(XmlValue.STRING);
xd.getMetaData("", "owner", ownerVal);
r.setOwner(ownerVal.asString());
XmlValue createdVal = new XmlValue(XmlValue.DATE_TIME);
xd.getMetaData("", "created", createdVal);
r.setCreated(createdVal.asString());
XmlValue updatedVal = new XmlValue(XmlValue.DATE_TIME);
xd.getMetaData("", "updated", updatedVal);
r.setModified(updatedVal.asString());
r.setPosition(search.getStartPosition() + i);
updatedVal.delete();
createdVal.delete();
ownerVal.delete();
groupVal.delete();
xd.delete();
xv.delete();
vec.add(r);
i++;
xr.delete();
xqe.delete();
xqc.delete();
return vec.toArray(new Result[vec.size()]);
} catch (XmlException e) {
e.printStackTrace();
// PLUS SOME OTHER METHODS, BUT USING ONLY THESE TO TEST
The Servlet looks like this:
public class DGServlet extends javax.servlet.http.HttpServlet implements javax.servlet.Servlet {
private DG dg;
private final XPathFactory xpf = XPathFactory.newInstance();
private final XPath xp = xpf.newXPath();
private final SimpleDateFormat df = new SimpleDateFormat("EEE MMM d HH:mm:ss z yyyy");
public DGServlet() {
super();
@Override
public void destroy() {
try {
dg.close();
} catch (Exception e) {
log(e.getMessage());
e.printStackTrace();
super.destroy();
protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
String action = request.getParameter("action");
if (action != null && !action.equals("")) {
if (action.equals("search")) {
response.setContentType("text/xml");
Result[] result = null;
try {
result = dg.search(constructSearch(request));
} catch (Exception e1) {
log(e1.getMessage());
e1.printStackTrace();
if (result==null || result.length==0) {
response.getWriter().print("0");
return;
StringBuffer sb = new StringBuffer("<results>");
for (int i = 0; result != null && i < result.length; i++) {
try {
sb.append("<result"
+ " title='"
+ xp.evaluate("/metadata/idinfo//title", new InputSource(new StringReader(result[i]
.getMetadata()))));
sb.append("' northbc='"
+ xp.evaluate("//northbc", new InputSource(new StringReader(result.getMetadata())))
+ "' southbc='"
+ xp.evaluate("//southbc", new InputSource(new StringReader(result[i].getMetadata())))
+ "' eastbc='"
+ xp.evaluate("//eastbc", new InputSource(new StringReader(result[i].getMetadata())))
+ "' westbc='"
+ xp.evaluate("//westbc", new InputSource(new StringReader(result[i].getMetadata())))
+ "' docid='" + result[i].getDocumentId() + "' group='" + result[i].getGroup()
+ "' owner='" + result[i].getOwner() + "' position='" + result[i].getPosition()
+ "' modified='" + result[i].getModified() + "' created='" + result[i].getCreated()
+ "'>");
NodeList nodes = (NodeList) xp.evaluate("//digform", new InputSource(new StringReader(result[i]
.getMetadata())), XPathConstants.NODESET);
for (int j = 0; j < nodes.getLength(); j++) {
sb.append("<resource download='"
+ StringEscapeUtils.escapeXml(xp.evaluate("//networkr", new InputSource(
new StringReader(XMLUtil.printDOMTree(nodes.item(j)))))));
sb.append("' format='"
+ StringEscapeUtils.escapeXml(xp.evaluate("//formname", new InputSource(
new StringReader(XMLUtil.printDOMTree(nodes.item(j)))))));
sb.append("'></resource>");
sb.append("</result>");
} catch (XPathExpressionException e) {
e.printStackTrace();
log(e.getMessage());
} catch (TransformerConfigurationException e) {
e.printStackTrace();
log(e.getMessage());
} catch (TransformerFactoryConfigurationError e) {
e.printStackTrace();
log(e.getMessage());
} catch (TransformerException e) {
e.printStackTrace();
log(e.getMessage());
sb.append("</results>");
response.getWriter().print(sb.toString());
else if (action.equals("details")) {
response.setContentType("text/html");
String str = "";
try {
str = dg.getDocument(request.getParameter("docId"));
response.getWriter().print(
setTranslatePage(str, new java.net.URL(
"http://localhost:8080/datastream/stylesheets/fgdc/fgdc_classic.xsl")));
} catch (Exception e) {
e.printStackTrace();
log(e.getMessage());
public void init() throws ServletException {
super.init();
dg = new DG();
It seems to work fine for a while, but then I get errors like the following:
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
com.sleepycat.dbxml.XmlException: Error: DB_RUNRECOVERY: Fatal error, run database recovery, errcode = DATABASE_ERROR
at com.sleepycat.dbxml.dbxml_javaJNI.XmlManager_prepare__SWIG_0(Native Method)
at com.sleepycat.dbxml.XmlManager.prepare(XmlManager.java:586)
at edu.washington.cev.datastream.api.DG.search(DG.java:935)
at edu.washington.cev.datastream.servlets.DGServlet.doGet(DGServlet.java:83)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
at java.lang.Thread.run(Thread.java:619)
I've set this up on a Window XP machine using tomcat 5.5 and java 5 as well as a Redhat Linux machine with tomcat 5.5 and java 5. I'm using the Web Service point for other servers to access the database. Everything starts up and runs for a little while, but I can't seem to pin down what causes the errors. I've run recovery multiple times as well as started new databases. Any help is appreciated.

There's a bug in your use of DB XML somewhere. Are you committing or aborting every transaction that you start, and calling delete() explicitly on all the DB XML objects that you use?
Those errors mean your database has become corrupted somehow.
John

Device error detected

When I try to find out what is a problem with my printer, I get the message Device error detected. I cannot find out how to correct it. There are no suggestions as to how to correct this.

Hello g-1zmine, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing device errors. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find your product number. Also, please include which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information and the product number we can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Also, are these errors appearing on the printer or the computer?
Please let me know what you find. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Error detected while attempting to run job

Hi everyone,
One of my users tried to run a rule in Hyperion Planning 11.1.1.3 and an error occurred:   Error detected while attempting to run job
When I went to Essbase, I found that when I launched the rule an error appeared:
ERROR - 1006059 - Invalid block header: Illegal block type -- Please use the IBH Locate/Fix utilities to find/fix the IBH problem.
I read that it could be an issue related to corrupted blocks. I'm not familiar with MXL and I read that there are commands that I could run. Someody could provide me help?
Regards,

I have XCP files:
----- Exception Error Log Begin -----
Current Date & Time:   Thu Nov 07 13:31:38 2013
Process Type:          Application
Application Name:      HYPCOLAN
Database Name:         COSTS
Exception Log File:    c:\Hyperion\logs\essbase\app\HYPCOLAN\COSTS\log00001.xcp
Current Thread Id:     5940
Exception Code:        0xC0000005=Access Violation
Exception Flags:       0x00000000=Continuable
Exception Address:     0x603B569F
Exception Parameters: 2
Exception Parameter 0: 0x00000001=Write Violation
Exception Parameter 1: 0x57970000 (Virtual Address)
----- Machine Registers -----
General Registers:
   EAX=0x795D0E18 EBX=0x5796FFF8 ECX=0x57970038
   EDX=0x0DC0F6CC ESI=0x00000048 EDI=0xFD320000
Control Registers:
   CS =0x0000001B EIP=0x603B569F Flg=0x00010283
   SS =0x00000023 ESP=0x024ACBB0 EBP=0x024ACBCC
Segment Registers:
   DS =0x00000023 ES =0x00000023 FS =0x0000003B
   GS =0x00000000
Floating Point Registers:
   CWD=0xFFFF027F SWD=0xFFFF3920 TWD=0xFFFF3FFF
   EOF=0x603B5699 ESL=0x0505001B DOF=0x603E9B50
   DSL=0xFFFF0023 CRS=0x00000000
Register Area (Hex):
   00 B0 B0 3A F7 7C 1D 90 CE BF
   00 00 00 00 00 00 00 00 00 00
   00 00 00 00 00 00 00 00 00 00
   00 00 00 00 00 00 00 00 00 00
   00 00 00 00 00 00 00 00 00 00
   00 00 00 00 00 00 00 00 00 00
   00 00 00 00 FC 09 A0 95 26 40
   00 00 C0 C6 B2 2C 7B 91 28 40
Debug Registers:
   DR0=0x00000000 DR1=0x00000000 DR2=0x00000000
   DR3=0x00000000 DR6=0x00000000 DR7=0x00000000
----- Stack -----
Stack Trace:
    0: 0x603b569f ESSSVRD@adReqCurrencyTransBegin + 0x9c22f 0x00000000010cf0a4 0x000000000dc0f6cc 0x000000000dc0f378 0x000000004a25db00
    1: 0x603b6ba8 ESSSVRD@adReqCurrencyTransBegin + 0x9d738 0x00000000010cf0a4 0x000000000032af01 0x0000000000000004 0x000000000000198a
    2: 0x603bb76b ESSSVRD@adReqCurrencyTransBegin + 0xa22fb 0x00000000010cf0a4 0x000000004a25db00 0x000000000dc0f330 0x000000000da45d00
    3: 0x603bc2d1 ESSSVRD@adReqCurrencyTransBegin + 0xa2e61 0x00000000000003a8 0x00000000010cf0a4 0x000000004a25db00 0x00000000214e006c
    4: 0x603bc441 ESSSVRD@adReqCurrencyTransBegin + 0xa2fd1 0x000000004a25db00 0x00000000024ad2a8 0x00000000010cf0a4 0x0000000000000000
    5: 0x603bf614 ESSSVRD@adReqCurrencyTransBegin + 0xa61a4 0x00000000010cf0a4 0x000000000025db00 0x0000000000000000 0x00000000010cf0a4
    6: 0x6037dc5f ESSSVRD@adReqCurrencyTransBegin + 0x647ef 0x0000000000000002 0x0000000000000000 0x00000000010cf0a4 0x00000000024ad2a8
    7: 0x6037e28d ESSSVRD@adReqCurrencyTransBegin + 0x64e1d 0x00000000010cf0a4 0x00000000024ad2a8 0x0000000000000002 0x0000000000000000
    8: 0x60376993 ESSSVRD@adReqCurrencyTransBegin + 0x5d523 0x000000000013003a 0x0000000000000000 0x00000000010cf0a4 0x00000000004ad200
    9: 0x601c902e ESSSVRD@adCSCRConvFixMbrFromBitMap + 0x1115e 0x000000000000012c 0x00000000596ea148 0x0000000000000000 0x00000000024ad40c
   10: 0x601af5d2 ESSSVRD@adOdomInc + 0x3172 0x00000000010cf0a4 0x00000000010cc462 0x000000000dc99940 0x000000000dc48fd8
   11: 0x601af718 ESSSVRD@adOdomInc + 0x32b8 0x00000000010cf0a4 0x00000000010cc462 0x00000000588edfd8 0x0000000000000000
   12: 0x601b02c5 ESSSVRD@adOdomInc + 0x3e65 0x00000000010cf0a4 0x000000000dc2d540 0x00000000010cf0a4 0x00000000604d283d
   13: 0x6032eb72 ESSSVRD@adReqCurrencyTransBegin + 0x15702 0x00000000010cf0a4 0x000000000dc6a0a4 0x000000000dc6a008 0x00000000024af660
   14: 0x6032db25 ESSSVRD@adReqCurrencyTransBegin + 0x146b5 0x000000000dc6a0a4 0x000000000dc6a008 0x00000000024af660 0x00000000604cfbba
   15: 0x603320d8 ESSSVRD@adReqCurrencyTransBegin + 0x18c68 0x00000000010cf0a4 0x000000000000000d 0x00000000024af660 0x0000000000004650
   16: 0x602ed5ac ESSSVRD@adThreadRegister + 0x467c 0x00000000010cf0a4 0x0000000000004650 0x0000000000000000 0x0000000000000000
   17: 0x602eec17 ESSSVRD@adThreadRegister + 0x5ce7 0x00000000000cf0a4 0x0000000000000000 0x0000000000000000 0x00000000010cf0a4
   18: 0x77e6481f kernel32@GetModuleHandleA + 0xdf 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000
----- Application-Wide Configuration -----
Server Name:
Application Name:      HYPCOLAN
Elapsed App Time:      00:21:23:39
Module Count:          16
Module 0:             0x00401000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSVR.EXE
Module 1:             0x60001000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSVRD.DLL
Module 2:             0x60B31000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSASOSM.DLL
Module 3:             0x60CA1000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSRPM.DLL
Module 4:             0x60DC1000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSAPINU.DLL
Module 5:             0x60E91000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOTLSU.DLL
Module 6:             0x60F41000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOTLNU.DLL
Module 7:             0x60F81000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSMTDNU.DLL
Module 8:             0x61031000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOPGN.DLL
Module 9:             0x61061000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSHRU.DLL
Module 10:             0x61135430 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSUTLU.DLL
Module 11:             0x61151000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSDU.DLL
Module 12:             0x61171000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSGLOBU.DLL
Module 13:             0x61181000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSECU.DLL
Module 14:             0x61191000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOBJIO.DLL
Module 15:             0x611A1000 = C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSDVRQ.DLL
----- Operating System Resources -----
System Date & Time:    Thu Nov 07 13:31:39 2013
Elapsed OS Time:       13:21:34:36
OS Name & Version:     Windows NT 5.02
CPU Count:             16
CPU Type:              Pentium
Correct System Memory information currently not available
Swap Flags:
   Enabled:            Y
   Disabled:           N
   File Found:         Y
   Denied:             N
Swap file(s):          c:\pagefile.sys
Correct Swap Space information currently not available
Total Drives:          6
Current Drive:         3
Drive 3:
   Drive Name:         C
   Volume Label:       Local Disk
   Drive Type:         Fixed
   File System:        NTFS
   Total Drive Space: 142689329 KB
   Free Drive Space:   71187620 KB
   Used Drive Space:   71501709 KB
Drive 4:
   Drive Name:         D
   Volume Label:       Drive_D
   Drive Type:         Fixed
   File System:        NTFS
   Total Drive Space: 292415096 KB
   Free Drive Space:   18586252 KB
   Used Drive Space:   273828844 KB
Drive 5:
   Drive Name:         E
   Volume Label:
   Drive Type:         Unknown
   File System:        Unknown
   Total Drive Space: 0 KB
   Free Drive Space:   0 KB
   Used Drive Space:   0 KB
Drive 6:
   Drive Name:         F
   Volume Label:
   Drive Type:         Unknown
   File System:        Unknown
   Total Drive Space: 0 KB
   Free Drive Space:   0 KB
   Used Drive Space:   0 KB
Drive 7:
   Drive Name:         G
   Volume Label:
   Drive Type:         Unknown
   File System:        Unknown
   Total Drive Space: 0 KB
   Free Drive Space:   0 KB
   Used Drive Space:   0 KB
Drive 21:
   Drive Name:         U
   Volume Label:
   Drive Type:         Unknown
   File System:        Unknown
   Total Drive Space: 0 KB
   Free Drive Space:   0 KB
   Used Drive Space:   0 KB
----- System-Wide Configuration -----
Elapsed Essbase Time: 00:21:23:39
Essbase Version:       11.1.1
Essbase Description:   ESB11.1.1.3.0B126
Network Type:          Windows Sockets
Environment Variable: ARBORPATH                 = c:\Hyperion\products\Essbase\EssbaseServer
Environment Variable: ARBORMSGPATH              = c:\Hyperion\products\Essbase\EssbaseServer\bin
Module Count:          16
Module 0:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSDU.DLL
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
Module 1:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSGLOBU.DLL
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
Module 2:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSUTLU.DLL
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
Module 3:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSECU.DLL
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
Module 4:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOBJIO.DLL
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
Module 5:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOPGN.DLL
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
Module 6:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOTLSU.DLL
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
Module 7:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSHRU.DLL
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
Module 8:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSAPINU.DLL
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
Module 9:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSOTLNU.DLL
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
Module 10:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSRPM.DLL
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
Module 11:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSMTDNU.DLL
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
Module 12:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSASOSM.DLL
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
Module 13:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSDVRQ.DLL
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
Module 14:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSVRD.DLL
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
Module 15:
   Module Name:        C:\HYPERION\PRODUCTS\ESSBASE\ESSBASESERVER\BIN\ESSSVR.EXE
   Module Version:     11.1.1.1
   Module Description: ESB11.1.1.3.0B126.1
   Module Use Count:   2
----- ESSBASE.CFG Configuration Values -----
Configuration Value:   JvmModuleLocation         = c:\Hyperion\common\JRE\Sun\1.5.0\bin\client\jvm.dll
Configuration Value:   AuthenticationModule      = CSS
Configuration Value:   PORTINC                   = 3
Configuration Value:   DataErrorLimit            = 65000
Configuration Value:   CalcCacheHigh             = 1100000000
Configuration Value:   CalcCacheDefault          = 500000000
Configuration Value:   CalcCacheLow              = 30000000
Configuration Value:   CalcLockBlockHigh         = 4000000
Configuration Value:   CalcLockBlockDefault      = 900000
Configuration Value:   CalcLockBlockLow          = 400000
Configuration Value:   UpdateCalc                = False
Configuration Value:   NetDelay                  = 3000
Configuration Value:   NetRetryCount             = 1000
Configuration Value:   MultipleBitmapMemCheck    = True
Configuration Value:   ParCalcMultipleBitmapMemOpt = True
Configuration Value:   DYNCALCCACHEWAITFORBLK    = TRUE
Configuration Value:   DYNCALCCACHEBLKRELEASE    = TRUE
Configuration Value:   DYNCALCCACHEMAXSIZE       = 600M
Configuration Value:   DYNCALCCACHECOMPRBLKBUFSIZE = 400M
Configuration Value:   CalcLimitFormulaRecursion = TRUE;
Configuration Value:   AGENTPORT                 = 1423
Configuration Value:   SERVERPORTBEGIN           = 32768
Configuration Value:   SERVERPORTEND             = 33768
Configuration Value:   AGENTDESC                 = hypservice_1
----- Client Request Activity -----
Server Name:
Application Name:      HYPCOLAN
Total Request Threads: 20
Avail Request Threads: 19
Total Requests:        220
Average Requests:      111.000000
Weighted Average:      0.007431
Statistics Per Minute:
   Current Requests:   0
   Minimum Requests:   0.000000
   Maximum Requests:   111.000000
Thread Count:          20
Thread Id 3324:
   Request Name:        GetAttributeNameSpecs
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 4060:
   Request Name:        GetMbrInfo
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 1692:
   Request Name:        OtlQueryAttrib
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 736:
   Request Name:        OtlQueryAttrib
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 5288:
   Request Name:        OtlQueryAttrib
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 784:
   Request Name:        OtlQueryMbrs
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 220:
   Request Name:        GetSelectedMbrInfo
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 4356:
   Request Name:        OtlQueryAttrib
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 6100:
   Request Name:        OtlQueryAttrib
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 5944:
   Request Name:        OtlQueryAttrib
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 4880:
   Request Name:        OtlQueryAttrib
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 1128:
   Request Name:        OtlQueryMbrs
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 5728:
   Request Name:        OtlQueryAttrib
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 5960:
   Request Name:        OtlQueryAttrib
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 1208:
   Request Name:        GetOtlUMC
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 5240:
   Request Name:        OtlQueryAttrib
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 1768:
   Request Name:        OtlQueryAttrib
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 3648:
   Request Name:        OtlQueryAttrib
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 1736:
   Request Name:        GetOtlInfo
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:33 2013
   End Time:            Thu Nov 07 13:31:33 2013
Thread Id 5940:
   Request Name:        MaxL: Execute
   Database Name:       COSTS
   User Name:           admin
   Start Time:          Thu Nov 07 13:31:38 2013
   End Time:            Pending
----- Exception Error Log End -----

Issue :ORA-01890:NLS error detected

Hi all,
i am using oracle 10g, when i execute below query
Select column_1,column_2,column_3 from view_name
where trunc(c_date) >to_date('05-24-2011','MM/dd/YYYY'));
I am getting this error in Toad, but no errors in SQL developer.
Error: ORA-01890:NLS error detected
Please help me how can i solve this issue.
thanks in advance
karmaya

That's nice.
This isn't the TOAD forum, it's the JDeveloper/ADF forum
You don't see an obvious problem with
to_date('05-24-2011','MM/dd/YYYY')As in those date formats don't match at all?

Cat c6509 E with Supervisor vs-s720-10g reload and Cache error detected!

Can you help me Cat c6509-E reload
connect console I see :
Initializing ATA monitor library...
Self extracting the image... [OK]
Self decompressing the image : ############################# [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, s72033_sp Software (s72033_sp-IPBASEK9-M), Version 12.2(33)SXI1, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Sat 28-Mar-09 10:48 by prod_rel_team
Image text-base: 0x40101328, data-base: 0x421FFA10
Cache error detected!
CPO_ECC (reg 26/0): 0x000000B6
CPO_CACHERI (reg 27/0): 0x84000000
CP0_CAUSE (reg 13/0): 0x00004800
Real cache error detected. System will be halted.
Error: Primary data cache, fields: , 1st dword
Actual physical addr 0x00000000,
virtual address is imprecise.
Imprecise Data Parity Error
Imprecise Data Parity Error
22:12:30 UTC Tue Mar 24 2015: Interrupt exception, CPU signal 20, PC = 0x413EB310
Possible software fault. Upon reccurence, please collect
crashinfo, "show tech" and contact Cisco Technical Support.
-Traceback= 414EDA90
$0 : 00000000, AT : 42510000, v0 : 00000000, v1 : 00000001
a0 : 43757CC4, a1 : 00040110, a2 : 45762ECE, a3 : 00000000
t0 : 44997CF0, t1 : 00000000, t2 : D5303A40, t3 : 00003A40
t4 : 0000004F, t5 : 0000005F, t6 : 68C8F600, t7 : 00000000
s0 : BEDA4010, s1 : 00000000, s2 : 00000000, s3 : 44086D60
s4 : 45762ECC, s5 : 00000001, s6 : 00000080, s7 : 44080000
t8 : 45762ECC, t9 : 00000000, k0 : 841E6970, k1 : 02951800
gp : 4250FC60, sp : 44997D48, s8 : 4499848E, ra : 413EB310
EPC : 414EDA90, ErrorEPC : 413EB310, SREG : 3400F105
MDLO : 00159DC0, MDHI : 00000000, BadVaddr : 00000000
DATA_START : 0x421FFA10
Cause 00004800 (Code 0x0): Interrupt exception
File bootflash:crashinfo_20150324-221230 Device Error :No such device
%Software-forced reload
22:12:30 UTC Tue Mar 24 2015: Breakpoint exception, CPU signal 23, PC = 0x4171F5E0
Possible software fault. Upon reccurence, please collect
crashinfo, "show tech" and contact Cisco Technical Support.
-Traceback= 4171F5E0 4171D184 40F4F26C 40F4F450 40F4F670 4171282C
$0 : 00000000, AT : 42510000, v0 : 441D0000, v1 : 424C0000
a0 : 00000000, a1 : 00008100, a2 : 00000000, a3 : 00000000
t0 : 0000FF00, t1 : 3401FF01, t2 : 41712918, t3 : FFFF00FF
t4 : 41712918, t5 : 73206265, t6 : 65746563, t7 : 20546865
s0 : 00000000, s1 : 424C0000, s2 : 00000000, s3 : 08000000
s4 : 42380000, s5 : 42380000, s6 : 41D90000, s7 : 00000001
t8 : 506D5CC4, t9 : 00000000, k0 : 00000000, k1 : 00000000
gp : 4250FC60, sp : 50012420, s8 : 41D90000, ra : 4171D184
EPC : 4171F5E0, ErrorEPC : 413EB310, SREG : 3401FF03
MDLO : 00000000, MDHI : 00000003, BadVaddr : 00000000
DATA_START : 0x421FFA10
Cause 00000024 (Code 0x9): Breakpoint exception
=== Flushing messages (22:12:30 UTC Tue Mar 24 2015) ===
Buffered messages:
Queued messages:
*Mar 24 22:12:30.695: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
Firmware compiled 19-Feb-09 20:18 by weizhan Build [100]
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: Error address Lo=0x4010
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: Error address Hi=0x1EDA
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: Interrupt Hi reg=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: Interrupt lo reg=0x8000000
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-DUMP: System controller Global Registers Dump
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: global hazard reg=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: soft reset cfg reg=0x10FFFF
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: global cfg reg=0x20
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: init status reg=0x8
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: ibl cfg reg=0xE
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: prio map cfg reg=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: ecc error log reg=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: parity error log reg=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: jtag idcode reg=0x5013102F
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: work status reg hi=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: work status reg lo=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: eobc rxstat reg=0x11FE
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: eobc txstat reg=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: eobc mac cfg reg=0xE24
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: inbound rxstat reg=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: inbound txstat reg=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: io int stat reg=0x408
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: pcmcia cfg reg=0x1A0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: pcmcia stat reg=0x3C
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: bist go stat reg=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: bist done stat reg=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: ibl debug reg 0=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: ibl debug reg 1=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: ibl debug reg 2=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: obl debug reg 0=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: obl debug reg 1=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: rxq debug reg=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: txq debug reg=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: gigmac cfg reg=0x1001
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: gigmac stat reg=0x0
*Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-FATAL: An unrecoverable error has been detected. The system is being reset.
*Mar 24 22:12:30.695: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
*Mar 24 22:12:30.695: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
*Mar 24 22:12:30.695: %OIR-6-CONSOLE: Changing console ownership to switch processor
*** System received a Cache Parity Exception ***
signal= 0x14, code= 0x84000000, context= 0x441ce024
PC = 0x4171295c, Cause = 0x820, Status Reg = 0x34018002
System Bootstrap, Version 8.5(3)
Copyright (c) 1994-2008 by cisco Systems, Inc.
Cat6k-Sup720/SP processor with 1048576 Kbytes of main memory
Autoboot: failed, BOOT string is empty
Autoboot executing command: "boot "

Hello Abubaker,
It crashed due to a parity error.
Imprecise Data Parity Error
Imprecise Data Parity Error
Which in other words means, a temporary error in memory. On single occurence adivice is to monitor the supervisor for re-occurence of such failure again. You can monitor it for 24 - 48 hours and if its a hard failure , the likelyhood of issue coming again is more and you need to replace supervisor. If it does not repeat you can consider this as a one time issue and contnue using it.
Hope this helps and please always rate useful posts.
Thanks,
Madhu

%PM-4-ERR_DISABLE: loopback error detected on Gi0/2

Similar Messages

Maybe you are looking for