PM Basic Order View

Attempting to configure a basic order view for order type F1
I have configured the basic view profile with the following to see if it will work:
View profile:  Fleet
Tabs
Tab Page  10
Tab Active  "checked"
TabPageTitle  Fleet Order
TabPageSymbol  Blank
S 1  005
S 2  001
S 3 002
Navigation
Pushbutton   Header Data
Tab Page  10
I have also assigned this to the F1 order type for all activities.
When I go to create an F1 order my view does not change.
What could I be missing?

Hi,
You need to be really careful when you are turning on enhancement packs on SAP, once this functionality is working is not possible to return back. This application may have impacts in other areas
Please review the information below:
http://help.sap.com/erp2005_ehp_02/helpdata/EN/46/4AD530501C0DB6E10000000A1553F6/frameset.htm
Regards
Carlos Gonzalez

Similar Messages

  • Basic order view IMG activities in ECC6.0

    Hi guys,
    In our ECC6.0 system the IMG activities for customizing the tab pages in the PM order are missing. In the releasenote for ECC 6.0 it says I should expect it under Maintenance and Service Orders -> Functions and Settings for Order Types -> Basic Order View.
    Any of you have the same problem? How did you get to the IMG activities?
    Thanks in advance!

    Hi Harvey,
    To enable the PM order screen layout in IMG, the extension set EA-SCM-IMG (Enterprise SCM switch for IMG) activation is enough or any other components are needs to be configured. (Component EA-APPL is already installed).
    Is there any implications by activating this extension set? where should i get the documentation to know the affects by activating any extension set.

  • Basic Order View - Define View Profiles

    In ECC 6.0, we have an option to customize the work order screen as per the busiess needs in the configuration path:
    Plant Maintenance and CS -> Maintenance and Service Processing -> Functions and Settings for Order Types -> Basic Order View -> Define View Profiles
    Question -> Is there a view profile defined by SAP for standard SAP work order screen?
    We have a requirement to modify the standard SAP work order screen where we have to add additional tabs. Since there is no profile defined for standard SAP work order screen, we have to build from the scratch which takes a lot of time.
    Any suggestions?
    Thanks

    Thanks SN. Yes, I am aware of the user exit and also that we can configure the screens of work order in ECC 6.0 using SPRO but the only problem is that we have to build it from scratch. My question was to know if SAP had standard screen templates or profiles like they have for Notiification. Anyways thanks for your response, I got the below response from SAP for my question.
    I've checked if its possible to customize the screen selections
    like it can be done for notifications and unfortunately it isnt
    possible in the standard system
    The only customizing that can be done for order can be found using the
    following path:
    SPRO>>>IMG>>>PLANT MAINTENANCE & CUSTOMER SERVICE>>>MAINTENANCE &
    SERVICE PROCESSING>>>MAINTENANCE & SERVICE ORDERS
    You will find the following options:
    DEFINE FIELD SELECTION FOR ORDER HEADER(PM)
    DEFINE FIELD SELECTION FOR ORDER HEADER(CS)
    DEFINE FIELD SELECTION FOR ORDER OPERATION(PM & CS)
    DEFINE FIELD SELECTION FOR ORDER COMPONENT(PM & CS)

  • Basic Order View.

    Hi,
    I am configuring BASIC ORDER VIEW, I have two queries
    1) Why am I not able to view this pushbutton any where on the initial screen?
    2)I want to view the costs in this configured view without switching it to the old GUI.
    Thanks in advance.

    hi
    can you clearly specify the requirement , i am not able to understand your query
    regards
    thyagarajan

  • Basic Order View - Plant Maintenance

    Looking for any advice, tips, tricks, things to look out for in using screen blocks, to structure the tabs on work order configuration, similar to notification configuration.  I believe that this functionality came in with enhancement pack 3 in ECC6.0.

    Dear,
    For creting a Order view as per ur requierment, first u need to create a view profile in the customozing
    When defining the tab pages, you must note the following:
    The key of the tab page serves as the sort key for the sequence in which the tab pages are displayed.
    You can assign a maximum of eight screen areas to a tab page. The sequence in which the screen areas are assigned also determines the sequence in which they are displayed on the tab page.
    There are screen areas that take up a whole tag page (fullscreen). You must always enter these screen areas in the field for the screen area 1.
    For all the pushbuttons for the navigation, that are offered on the initial screen of the order, you must define which tab page is displayed when you select the pushbutton.
    If you do not define an active tab page for a pushbutton, the system uses the first tab page.
    Now assign the created profile to the order type, planning plant and the activity category.
    If you leave the activity category empty, then the assigned view profile applies to all the activity categories.
    If you also define an activity category (for example, add), then the assigned view profile only applies to this activity category.
    regards
    sunil

  • Maximum lines set on Sales Order view

    Hi All,
    This is happening with all sales orders with more than 8 items, where the rest of the items are not seen in the sale order after creation and save. For example 15 different type of material were sold to customer, the billing document view (VF03) showed all 15 line items, the delivery line items showed all 15 lines, but the sales order only showed the first 8 line items. The other last 7 items were not to be seen anywhere on the sales order.
    Is there a maximum view limit on sales orders? Anyone else has had a similar case?
    Thanks
    Sandip

    Hi Balaji,
    I tried to access SE51 but I have no authorization, and even though I maintain user accounts at my company I could not find more details in regards to this Tcode.
    I even tried to find some role associated with it but was unsuccessful.
    Hi Chandrasekhar,
    For the information in VOV8, the Display Range had 'UALL' in the field.
    And wierdly, when I clicked on the Item Overview, all items (15 different types) are shown, but when going back into the Sales Order View for the same order, only the first 8 are shown.
    The main problem here is that when doing a ZRE sales order, as we cannot do 'post goods receipt' for the 9th+n item.
    I appreciate the help.

  • How to use column with linkToItem in the Basic Table view style mode

    Hi
    I have already changed a normal column that I made to a column with linkToItem as follows.
    <viewfields>
    <FieldRef Name="MyColumn" linkToItem="TRUE">
    and it worked.
    But this column works only at the default view style mode in my case.
    Does anyone know how to use linkedToItem column in the Basic Table mode?
    hope someone help me.
    thanks

    Hi,
    According to your description, my understanding is that you want to use linkToItem in the Basic Table view style.
    Per my test, in the Default style view, we need to use linkToItem=”TRUE”. However, in Basic Table style view, we need to use LinkToItem=”TRUE” instead.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Merging Basic data View and Classification View in Material Master

    Hi,
    There is a requirement to append Classification View under Basic Data View and then finally to delete Classification View.
    As per my understanding, it is not possible. Please let me know if it is possible, if so, please let me know how is it possible.
    A quick response is appreciated.
    Thanks & Regards
    Bhaskar Baddela

    Hi,
       Refer the thread: Problem creating Material Master sales view with LSMW which discuss the same issue. You may check and revert back.
    Regards,
    AKPT

  • Is there anyway to create a basic Image Viewer in CS5?

    Hello,
    Im looking for a really basic Image Viewer - exactly like the one you could create using DW CS3 but od corse it was discontinued. Is there any other way I can create something similar using CS5? or if not can anyone recomend a bsic one on - line without all the thumb Nails and fancy stuff.
    Here is a perfect example of what I am looking for.
    www.broadsoft.com.au/janielle/test5
    Thanks

    Log-in to the Adobe Widget Exchange with your Widget Browser.
    There are a some jQuery and Ajax powered image viewers & slideshows you can grab for your site.
    jQuery Cycle Widget
    Lightbox Gallery Widget
    Spry Content Slides
    Spry Image Slideshow
    I don't recommend using a Flash viewer because it's not supported by all web devices.
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • Setting up a basic order template

    I'm trying to set up a basic template for an online order form for a 2014 Texas Barns Calender.
    Cost is $20.00 each
    Sales tax for Texas residents is  .0825%
    Need to have the option to change the quantity so that they can order more than one if desired.
    Accept Visa, MC, AMEX and Paypal.  I'm already set up on Paypal as a business account to do this.
    I will be linking the online form to an add on facebook.
    Can you please assist in setting this up?  I've started the form but have no idea if I'm doing it right or how to continue.  Thanks for your help!!
    Lisa Moore
    Moore Photography

    Hi,
    FormsCentral integration with PayPal does not support sales tax calculation.
    On how to set up your FormsCentral form fields as 'payment' fields please check this link and the payment forums:
    Forums: http://forums.adobe.com/community/formscentral/payments?view=documents
    How to set up your form with PayPal integration:http://forums.adobe.com/docs/DOC-1632 ,please check the examples.
    Thanks,
    Lucia

  • Still no playlist shuffle order view in iTunes 11.0.1. Alternatives?

    iTunes 11.0.1 has not restored the ability to view and export playlists in shuffled order. Does anyone know of a good Mac alternative to iTunes?

    View > Show Status Bar will out the b=grey bar back on the bottom where your data will be displayed

  • Me2o Purchase Order View

    Hello Folks!
    I am trying to implement subcontracting procedure in SAP. The Purchase order has been successfully created. The user wants to issue material from the warehouse. Before the standard the procedure the user was using MB1b to issue material. Now I have introduced the report Me2o. But i am unable to view Me2o Purchase Order vise.
    For example: If I want to issue material against a purchase order in Me2o (like in MB1B), how do i do that? Currently I am giving Assembly(Finished Product) to Me2o and the report shows the BOM for that product for all the open purchase order. I cannot select one purchase order and issue goods against it.
    The field selections that i have in Me2o are
    Vendor                                        
    Components Provided                       
    Assembly                                   
    Plant                          
    Requirement Date        
    Is the filed of Purchase Order selection is not maintained in Me2o?
    - Regards
    Sahar

    Hi,
    Me2O is the report for subcontract stock with particular vendor.
    You can view the stock per PO wise. you can view the stock by material wise only.
    Non issued material shown with RED mark  & particular material have the Purchasing document also.
    select the material expand you can view the PO number there.  itmay many PO number.
    then you have to select the right PO number then DO PGI.
    SAM

  • IW37N- Work Order View List- PR and PO fields are blank

    Hello,
    We are using IW37n to view workorders list. When we add the PO and PR fields to the view list  they are left blank but we know there are PR and PO related to workorders.
    Does anyone know how to make them display.
    Thanks.

    Hi Pete ,
    I am also facing the same issue .
    I have created a PM order with an external service operation with key ZPM3 .
    Now I have created a service PR from it and then service PO is created and then service entry sheet is done .
    I am using IW37N and I am able to see PR against the PM order but
    under the column" PO Number " there is no value .
    My requirement is to see the list of PM orders ,with PR from them,PO against those PR's , service entry sheet doc no against those PO's.
    which report could show me all these fields and why IW37N is not showing value under PO number.
    Plz help
    REgards
    AM

  • VA01 - Plant not showing in Sales Order view

    Dear Gurus,
    I want to create a sales order and have selected a SP + 1 Item.
    The plant has been maintained both in the Customer and the Material MD
    Why then is it not showing in the plant'/s table field: RV45A
    If I enter the plant manually: TCSP, the system sends me the following message of error:"The delivering plant will not be copied into the existing items".
    What does that mean?
    Please help.
    Regards
    Chris

    Hi Palani,
    Yes I have maintained it and it shows. As I said, I maintained the plant in the customer and the material master data.
    So what shall I do to show it into the document header?
    Please advise
    Kind regards
    Chris

  • 2 basic questions/ viewing clips and exporting to quicktime

    I have to problems thus far. 1stly, I'd like to figure if I can utilize the playback feature for more than one clip at a time. Whenever I try to use it, it only plays one clip then stops at the end, though i'd prefer it continue on through the transition into the next clip.
    2ndly, I've exported the clip into a quicktime file and uploaded it to my .mac account. People using apples can view it, but window's users cannot. NOr can they view it when I export it to a full size .mov and just email it to them. It tells them they're missing some compressor. Downloading the newest version of QT does not help either.
    Any help in either or both of these matters is greatly appreciated.

    Hi John,
    the uploading to .mac usually uses a sorenson codec in a .mov container.
    That can be watched on PC just when the free Quicktime Player for Windows is installed. does your friends have done that...?
    … It tells them they're missing some compressor. Downloading the newest version of QT does not help either. …newest version for PC or on your Mac's side?
    QT7 offers now the brandnew h.264 compression codec... this isn't supported on the Windows side yet (just experimental/beta)... so using the "latest" is maybe the wrong way...
    in the iM export dialog you'll find the option ".avi" (PC container + sorenson codec)… try that for a mail (big files!) and your friends should see your movie...
    and tell them, they shall buy a Mac, hey, c'mon!
    you can offer downloads of your project on .mac, but not as convenient as the "upload to" function. ... but that is another cup of tea......

Maybe you are looking for