PM Fleet Management Consumtion Relevant node missing under SPRO

Hi,
I am trying to configure Fleet Management under Plant Maintenance module using SPRO.
We are on ECC 6.0 with the patch levels to <N>.
I am not able to find the node "_Consumtion Relevant Counter Reading Update_" under Fleet Management System. The main node is missing which would further take me to the creation/defining of "Gas Stations". As, in the IFCU transaction system is asking for Gas Station Code.
Please let me know if I can provide some more information for the same, for you to help me with the same to the best of your knowledge.
Thanks in advance.
Vijay

Hello,
You need to activate the EA-PLM extension switch. See [this|Fllet management; thread.
-Paul

Similar Messages

HR Node missing in SPRO

Hi Experts,
We are implementing Training and event management module for our client. There is a node missing in SPRO "Sap Learning solution" under trainining and event management in DEV client.Whereas this node is available in IDES.Kindly let me know the name of the "Business function Set" so as to get it activated.
Would appreciate early resolution to my query.
Regds
Ramesh

Hi Ramesh,
Goto SPRO:
Very first node : activate business functions.
Enterprise-extensions.
Select EA-HR and click activate button.
Then goto SM31- T77S0 table.
Put an X for the entry HRLSO HRLSO
Regards,
Dilek

CMC: Security: Life Cycle Manager (LCM) missing under "Appication" Security

Hello there,
I am trying to set up security for the Life Cycle Manager (LCM). LCM has been installed on the BO 3.1 DEV_System with version SP2, FP4, by another company.
I am using the procedure described in the (my opinion very well written) article:
http://wiki.sdn.sap.com/wiki/display/BOBJ/FromDEVtoQAtoPRODusingLifeCycleManager
The problem is, in the CMC security, under "Application" ("Anwendung") security, I cant see the "life cycle manager",
Hence, e.g. I cant grant access to "Application"->"Life Cycle Manager"->"Create Job". I am using an Admin user with full rights.
The life cycle manager does show up however under "Content" ("Inhalt") security, but I guess this concerns other security settings bc granting access to all of "Content"->"Life Cycle Manager" and "Content"->"Life Cycle Manager Job" still didnt allow end-user to create jobs.
Did anybody stumble accross the same or has an explanation or solution?
I think this is either a installation or configuration issue (are there any additional settings after intallation needed in other places in order to display security "Application"->"Life Cycle Manager" security in CMC and be able to grant end-users the appropriate rights) ?
Thanks a lot for your help!

Hi there,
thanks... meanwhile, I found a SAP note that describes exactly the problem:
1443784
Advice is to even delete the whole workfolders for all webapps (.../localhost/catalina/...) and deployfolder and after that, start tomcat again.
This also seemed to deploy all the webapps again, also, date from the deployed files indicates they really got redeployed.
But: Still the same behaviour, no LCM in CMC-Security under "Applications" .
Since everything got deployed again guess already the files that are deployed are not containing the right information!
Maybe, during installation, they didnt get updated somehow.
So, guess only solution will be to completely uninstalling LCM, reinistall it and cross finger that this time, the files will get updated.
I already tried uninstalling FP 2.4, reinstalled it, no improvement (although it says it is updating CMCApp and CMCAppAction during installation - maybe the necessary updates are already done during isntallation of SP0/SP1/SP2).
When trying to uninstall SP2 after FP 2.4 is uninstalled, get an error "missing .dll" - it is a mess, but I will keep on fighting
If anybody has a clue how to specifically change specific files under CMCApp and CMCActionApp directly (dont know if that is possible though...) so that LCM App is displayed correctly in CMC Security->Application , would also be an acceptable workaround .

Business Process Monitoring - Monitoring Types Nodes missing

I am making the setup of the Business Process Monitoring. I have created a scenario, a process and a step. Bui I have a big problem I am not able to solve: when I select a monitoring type for the step I have created (e.g. Application Monitor, Background job, Dialog Performance etc), I know that a subnode should appear under the step node but in my case this does not happen and I am not able to configure the monitoring type (No subnode appears under the step node even if I select all the monitoring types).
Someone knows which is the problem? Is there some missing configuration or it could be a Support Package problem.
I will appreciate your help so much. Please, do not esitate to contact me for any further clarification.
Thanks
Antonello

Hi,
in the workflow definition you can suppress the node to be listed in the Monitoring. Check the the relevant nodes please.

Why is the import tab missing under the file tab?

Why is import missing under the file tab? I want to import bookmarks etc. from Safari into Firefox.

You can find the Import menu entry in the Bookmarks Manager (Library)
*Bookmarks > Show All Bookmarks > Import & Backup > Import Data from Another Browser
*http://kb.mozillazine.org/Import_bookmarks

Personal Information nodes missing in ECC 6.0

Hi,
Personal Information nodes missing in ECC 6.0
SAP HR Highest Level Support SAPKE60003
EA HR SAPKGPHD03
What may be the reason.
Note: Points will be rewarded immediately.
Kiran

Hello,
thank you so much.
I think that there is not soultion. SAP told me:
Dear Maria ,
You have set the Maximum period, Minimum remaining shelf life and
Total shelf life as zero. I tested this on our internal test system
and when these are all set to zero the fields PROD & SLED are not
visisble in the Material tab in tcode MIGO.
The shelf life is only checked when you enter a goods receipt if the
following prerequisites are met :-
1.The minimum remaining shelf life is maintained in the material master
record or in the purchase order. The minimum remaining shelf life is theminimum number of days for which the material must keep for the goods
receipt to be accepted by the system.
2.The shelf life expiration date check is active for the plant and
movement type in Customizing for Inventory Management.In the
transaction SPRO,if you check in SAP Reference IMG
Material Management > Inventory management and Physical Inventory
> Goods Receipt > Set Expiration date Check,the SLExp/prDt field
is checked for plant and material movement
Regards

Standard Structure Not Updating (S114) Fleet Management

Hi...
We are implmenting the Fleet Management . I did the following configuration setting
1) Created view profile and assign with fleet object type.
2) Define the Consuamable type, Engine Type .
3) Setting done for unit of measurement for monitoring of consumption.
4) Dfined special measuring position for fleet objects.
5) Defined calculation method for fleet consumption methods.
6) Created gas station locatin.
7) Setting done for consumption relevent counter reading update.
After that I have created fleet as a equipment. After that I am posting the fuel in IFCU transaction. Now I am facing one problem that distance data is updating in MCIZ transaction but Fuel Volume data is not updating in the MCIZ report. In the PMIS stting, the key figure "IAMENFLVOL" reference indicator is "A" (Key Figure to be updated).
Can anybody help me to solve this problem
Thanks in advance.
Regards
Pramod

Hi,
Check this link:
[Fleet Management|http://www.nd-solutions.com/pdfs/white_EAM/EAM_ConfiguringFleetMgt.pdf]
This link has all the steps with screen shots.
Also check SAP Note: 563832.
Hopefully this will resolve your issue.
Thanks,
Amit.
Edited by: Amit Saxena on Oct 23, 2008 10:12 PM

Re: Fleet management in Plant Maintenance

Hi Guru's
Here i have an issue reg the configuration screens in PM
In SAP-SPRO---Plant maintenance and Costumer Services, I am not able to find the Screens required for configuration for FLEET MANAGEMENT i e.,
1) Set List Processing for Fleet management objects.
2) Set reference object screen for Vehicles.
3) Consumption Relevant Counter reading Update.
These are mandatory for capturing the cost of the fuel into reports of Vehicle analysis report.
Please any one can Send me whether we need go for any Patches or to update any notes.
Present i am using ECC-6 EHP-5
Please reply back ,it is very urgent.
Regards
Kumar

I hope, for the below points there is no separate configuration.
1) Set List Processing for Fleet management objects.
2) Set reference object screen for Vehicles.
For 3) Consumption Relevant Counter reading Update.
IMG => PM & CS => Information systems for PM & CS => Configure Measurement document update
I hope, this is common for all the versions. Please check.

Some Nodes missing in CCMS Exchange Infrastructure "System Errors"

Hi All,
I have configured the ccms for XI System PI 7.0.But there are some nodes that are missing under system errors in XI node of CCMS
Nodes present under system errors in XI:
outbinding
mapping
Nodes that are missing under system errors in XI:
XIcache
Rcvr_determination
if_determination
internal
message.
Any help greatly appreciated
Aravind

pls check the following URL:
- /people/dirk.jenrich/blog/2007/01/21/how-to-use-the-monitor-set-sap-ccms-technical-operation-templates
- /people/sap.india5/blog/2005/12/06/xi-ccms-alert-monitoring-overview-and-features
A+

IMG Setting for Fleet Management - Set Reference Object for Vehicles

On other SAP 4.7 systems I have been able to access in the IMG "Set Reference Object Screen for Vehicles" under the "Settings for Fleet Management". I am currently working in a system that doesn't have that option in the IMG. What do I have to do to get this menu in the IMG?

Hi,
All the extra features provided by business functions in PLM are documented in note [1389108|https://service.sap.com/sap/support/notes/1389108]. See the pdf attachment in that note.
-Paul

Illuminate keyboard in low light conditions box is missing under keyboard preferences and my keyboard backlight is not lit. Any help?

"illuminate keyboard in low light conditions " box is missing under keyboard preferences and my keyboard backlight is not lit.
Any help?

Did you used to have the option? I did, and when my keyboard backlight stopped working, I followed instructions on 'Resetting the System Management Controller' http://support.apple.com/kb/HT3964. After I did that, the menu option completely disappeared, and I can't get it back.
I have the 2010 MacBook Pro (Intel), it used to work, but since moving to Lion, it hasn't, and now the option is gone altogether.

Song and Artist Info missing under itunes but not in the original file, and putting track number next to certian songs. Help

i recently updated my itunes...today i opened it up and moticed abuout 100 songs missing...they are now at the bottom of itunes song list with a number next to them with information mission such as this the example below
01 human                                                                 (this song should have the killers name as artist and cd title, etc)
01 hosanna     hillsong united                                 (this song should have the cd title to it)
02 lay me down                                          burning light
02 leave out all the rest
02 let it be                       the beatles
03 papercut
when i go under the original folders and files in the itunes folder everything is normal no missing info, etc. but under itunes orgnising its picking and choosing the same songs and putting the track number next to it and others songs in the same cd not. plus info missing. under the infor when i click right button all info missing there...but not under original file.
please help

A response on this subject from another post:
It could be that you have inadvertently imported these CDs into iTunes as part of a compilation. If so, the artists won't show in the artists menu on the iPod.
To check, highlight the tracks on one of the offending artists CDs in iTunes, right click and select "get info". This brings up a multiple song info window, and from there you can check if you have 'yes' in the box marked "part of a compilation".
If you have, select 'no' instead and click 'ok'. Do this with any CD that has this issue. This will alter the info in iTunes, and you should then connect your iPod and synchronize the changes.
The problem arises because the information contained on the Gracenote CD Data Base (where iTunes gets all it's album/artist/track info from), is sometimes incorrect. It can show CDs as compilations when in fact they are not.
ramstigo wrote:
I had an earlier post on this subject with a similar problem. I tried what you suggested and it worked indeed. You can select the artists from your Ipod on Itunes and after highlighting the artists/albums affected, click NO on the compilation box and the issue is resolved: the artists appear on the list.
Thank you so much!!!!.

Download manager and download tab missing in options box.

The download manager and download tab missing in options box when I dropdown tool in menu bar.

The default Firefox Options window doesn't have a separate tab for Downloads, those prefs are on the General tab below Startup.

Unable to start Manager server using Node Manager

Hi,
I have deployed Admin server in one of my unix machine(machine1) and i able to start my Admin server using node manager, and when i try to start my Managed server in another machine(machine2) using the node manager(that machine node manager) its throwing error;
Note: am able to start Managed server using Adminurl and able to connect to Managed server node manager successfully,
but not able to start Managed server using node manager
its giving exception as below;
error:- wls:/nm/webdomain> nmStart('ms1')
Starting server ms1 ...
Error Starting server ms1: weblogic.nodemanager.NMException: Exception while starting server 'ms1'
Managed server log: -
<Dec 13, 2011 3:40:17 PM> <INFO> <NodeManager> <Working directory is '/root/Oracle/Middleware/user_projects/domains/webdomain'>
[root@LinuxVM ~]# cat /root/Oracle/Middleware/user_projects/domains/webdomain/servers/ms1/logs/ms1.out00071
<Dec 13, 2011 3:40:17 PM> <INFO> <NodeManager> <Starting WebLogic server with command line: /root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/bin/java -Dweblogic.Name=ms1 -Dbea.home=/root/Oracle/Middleware -Djava.security.policy=/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy -Djava.library.path="/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/lib/i386/jrockit:/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/lib/i386:/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/../lib/i386:/root/Oracle/Middleware/patch_wls1035/profiles/default/native:/root/Oracle/Middleware/patch_ocp360/profiles/default/native:/root/Oracle/Middleware/wlserver_10.3/server/native/linux/i686:/root/Oracle/Middleware/wlserver_10.3/server/native/linux/i686/oci920_8" -Djava.class.path=/root/Oracle/Middleware/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/Oracle/Middleware/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/lib/tools.jar:/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/root/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.5.0.jar:/root/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/root/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/root/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/root/Oracle/Middleware -Dweblogic.system.BootIdentityFile=/root/Oracle/Middleware/user_projects/domains/webdomain/servers/ms1/data/nodemanager/boot.properties -Dweblogic.nodemanager.ServiceEnabled=true weblogic.Server >
<Dec 13, 2011 3:40:17 PM> <INFO> <NodeManager> <Working directory is '/root/Oracle/Middleware/user_projects/domains/webdomain'>
Nodemanager log:
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Rotated server output log to "/root/Oracle/Middleware/user_projects/domains/webdomain/servers/ms1/logs/ms1.out00070">
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Server error log also redirected to server log>
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Starting WebLogic server with command line: /root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/bin/java -Dweblogic.Name=ms1 -Dbea.home=/root/Oracle/Middleware -Djava.security.policy=/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy -Djava.library.path="/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/lib/i386/jrockit:/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/lib/i386:/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/../lib/i386:/root/Oracle/Middleware/patch_wls1035/profiles/default/native:/root/Oracle/Middleware/patch_ocp360/profiles/default/native:/root/Oracle/Middleware/wlserver_10.3/server/native/linux/i686:/root/Oracle/Middleware/wlserver_10.3/server/native/linux/i686/oci920_8" -Djava.class.path=/root/Oracle/Middleware/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/Oracle/Middleware/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/lib/tools.jar:/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/root/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.5.0.jar:/root/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/root/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/root/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/root/Oracle/Middleware -Dweblogic.system.BootIdentityFile=/root/Oracle/Middleware/user_projects/domains/webdomain/servers/ms1/data/nodemanager/boot.properties -Dweblogic.nodemanager.ServiceEnabled=true weblogic.Server >
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Working directory is '/root/Oracle/Middleware/user_projects/domains/webdomain'>
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Rotated server output log to "/root/Oracle/Middleware/user_projects/domains/webdomain/servers/ms1/logs/ms1.out00071">
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Server error log also redirected to server log>
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Server output log file is '/root/Oracle/Middleware/user_projects/domains/webdomain/servers/ms1/logs/ms1.out'>
<Dec 13, 2011 3:40:26 PM> <INFO> <webdomain> <ms1> <Server failed during startup so will not be restarted>
<Dec 13, 2011 3:40:26 PM> <WARNING> <Exception while starting server 'ms1'>
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.AbstractServerManager.start(AbstractServerManager.java:200)
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:23)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:604)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:119)
at weblogic.nodemanager.server.Handler.run(Handler.java:71)
at java.lang.Thread.run(Thread.java:662)

You can start a managed server as follows:
print 'START NODE MANAGER';
startNodeManager(verbose='true', NodeManagerHome=nodemanagerhomelocation, ListenPort='5556', ListenAddress='localhost');
print 'CONNECT TO NODE MANAGER';
nmConnect(adminusername, adminpassword, 'localhost', '5556', domainname, domainlocation, 'ssl');
print 'START ADMIN SERVER';
nmStart('AdminServer');
nmServerStatus('AdminServer');
print 'CONNECT TO ADMIN SERVER';
connect(adminusername, adminpassword);
print 'START MANAGED SERVER';
start('VideotheekWebServer','Server');
nmServerStatus('VideotheekWebServer');
print 'START CLUSTER';
start('VideotheekCluster','Cluster');
nmServerStatus('VideotheekServer1');
nmServerStatus('VideotheekServer2');JVM properties are set using the admin console and edit the startup properties of your managed server (configuration, server start).
The properties file (startup.properties) is saved in the directory <domain-home>/servers/<server-name>/data/nodemanager.

Photoshop submenu is missing under tools menu in bridge

I Have downloaded the new Photoshop CC 2014 and updated Bridge. Trying to send some pictures from Bridge to photoshop as layers is not possible because the photoshop submenu is not available under tools.
Checking Bridge preferences > start up, does not show Photoshop.
Checking Library> Adobe > BridgeCC > start up, does not have Photoshop in it.
Can somebody help me restore the Photoshop submenu.
Thanks
Rene.

Today when I start Bridge it had a message asking if I want to install a "Photoshop extension”.
So my problem is solved.
Thanks.
René Born 
[email protected]
El 22-06-2014, a las 14:58, DavyAllan <[email protected]> escribió:
Photoshop submenu is missing under tools menu in bridge
created by DavyAllan in Adobe Creative Cloud - View the full discussion
I have the same problem when trying to do a photomerge.
Work around by opening files than doing 'add open files'
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6484656#6484656
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Creative Cloud by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

PM Fleet Management Consumtion Relevant node missing under SPRO

Similar Messages

Maybe you are looking for