PM - Functional location and measuring points

Dear all,
is there any table that stores the link between a functional location and measuring points?
Thanks in advance for any help.
Regards,
sb.

Hi
you can go for
EQUI                             Equipment master data
Arunima

Similar Messages

  • Functional location in Measuring Point and while creating M.plan or differe

    Hi,
    we found that functional location in Measuring point and M.plan functional location Measuring point are differrent, how to restrict that one ,we need automatically flow of functional location from measuring point to Maintenance plan.
    --Ganesh

    Hi,
    If you created the Measuring Point for the selected FL, then that measuring point will be populated automatically. If you have more than one measuring point, then you can select using Possible entries option.
    In this case, I think its not possible to restrict with configuration.
       IPRM0004 Maintenance plan / item: Customer check for time "SAVE"
    Use this user exit, while saving check for the functional location for the selected measuring point & give error message.
    Use tables IMPTT to get Object Number of FL. Use IFLOT to get the FL.
    Regards,
    Maheswaran.

  • Function Modules for creation of characteristics and Measurement Points

    Hello everybody
    I'm new in ABAP (trainee) and especially the use of characteristics. I'd be very happy if somebody could help me :).
    Can anybody out there with some experience in creating characteristics and measurement points tell me how to create them with function-modules or by changing database tables?
    I'm happy about every hint and ready to give some reward points.
    Best Regards,
    Steffen

    FM and TABLES
    http://72.14.235.104/search?q=cache:71IXBMWcX_8J:reflexcontracts.co.uk/SAP_R3_QUICK_REF.xlsupdatetable+tse05&hl=en&ct=clnk&cd=1&gl=in
    FUNCTION MODULES
    http://www.erpgenie.com/abap/functions.htm
    http://www.sapdevelopment.co.uk/fmodules/fmssap.htm
    http://www.erpgenie.com/abap/index.htm
    http://www.geocities.com/victorav15/sapr3/abapfun.html
    Rewards if useful..........................
    Minal

  • Reg: measuring point creation and measuring point counter creation

    how to create measuring point and measuring point counter.
    what is the difference between these two.
    what is measuring point category,
    what is measuring point
    what is measuring point object
    what is measuring position.
    can anyone explain me in an easy for better understanding.

    Firstly a Measuring point is nothing but, a factor which you measure on an equipment/FL. (Temperature, Vibration etc)
    Then, a measuring point is created either on a Functional location or on an Equipment.
    IK01 is the T-code for creating it.
    If it is for F/L you have to use IFL as measuring point object, when it is an equipment you use IEQ
    Generally these two will be in use.
    In the IK01 screen if you tick the counter checkbox, the MP becomes a counter.
    Example for simple MP is temperature.
    And example for a Counter MP is 'Litres of petrol consumed'
    In the first case you don't need to add the temperature measurements, whereas in the petrol consumption you may wish to have the cumulative value of readings taken for a period of time.
    The measuring position: Example : If you are measuring the temperature of a Motor on the Drive side, you may put 'Drive End' in this field, or similar many applications.
    Category would group these MPs.
    In case of need you may define in customisation a sep[arate MP category.
    Then each time you read a MP through IK11 or other methods a Measuring Document is created.
    Regards
    Jogeswara Rao

  • Cost Center Linkage between Functional Location and Equipment.

    Hi Gurus,
    We have found in our analysis that it is impossible to copy the cost center of a superior functonal location to a subordinate one when the cost center of subordinate functional location is changed manually.
    We intend to do a mass change for our cost centers of all our functional locations and equipments for all our plants. We need to know how do we achieve this change of cost centers.
    Thanks:
    Siddharth

    Thanks All for your information.
    Actually the Master data team has to do a mass update of cost centers for the Functional locations and Equipments.
    And what we have found is that when we change the cost center for an equipment individually it changes the cost center origin of the equipment to "D" which means independent of the changes in the cost center at FL level.
    Be it IBIP or any other way what we have found that the linkage(cost center origin) between the FL and the EQUIP changes to "D"  when ever we change the cost center for the equipment.
    We don't want to change this linkage as it may have other consequences that we can not foresee at this point.
    So, my question is :
    If the FL and EQUIP linkage (cost center origin field) is changed(from H to D or D to H), what could be the effect on the FL and EQUIP relation?
    Cost center origin :
    D       Independent of changes in cost center at FL level
    H       It is dependent on the FL cost center.
    Thanks:
    Siddharth

  • Making system settings for measurement documents and measuring point

    What is the significance of making system settings for measurement documents and measuring point in spro?
    Edited by: Pallavi Kakoti on Jul 14, 2011 1:23 PM

    Hi,
    << Moderator message - Cut and paste response from http://www.consolut.com/en/s/sap-ides-access/d/s/doc/YY-OLI0IMRCCUST removed. Plagiarism is not allowed in SCN >>
    Regrds
    Jitender
    Edited by: Rob Burbank on Jun 6, 2011 10:53 AM

  • Relation between notification no and measuring point no or document

    Dear Expert's
    I want to link between notification no (qmnum) and measuring point no or measuring point document.
    I want to search measuring point number thorough notification no.
    plz suggest me ABAP purpose.
    thanks.
    regards:
    Neelesh Sonkar

    Hi,
    1. Get the EQUNR from the table "QMIH" using QMNUM.
    2. Get the MOVING_OBJECT from the table "IEQT_WL_MP" using EQUNR.
    3. Get the MDOCM (Measurement Document) POINT (Measuring Point) from the table "IMRG"
        using MOVING_OBJECT ( which is MDOCM ).
    Hope this will help you.
    Regards,
    Smart Varghese

  • Replication of functional location and equipment from ECC to CRM.

    Hi Guys
    I have activated the required BADI's and adapter objects for func loc and equipment. but i am not able to replicate the funcloc and equipment from ecc to crm.

    As of SAP CRM 7.0 you can replicate functional locations from SAP ERP to SAP CRM. This function is supported as of SAP enhancement package 4 for SAP ERP 6.0.
    In SAP CRM, functional locations are represented as object components of an installed base. The structure of functional locations is also replicated, and reflected in the installed base structure. If you replicate functional locations and pieces of equipment, the assignment of equipment to functional locations is also reflected in the installed base structure. The following replication processes are available:
    -     Initial download of functional locations from SAP ERP to SAP CRM in R3AS tcode.
    Bye,
    sekhar.

  • How to get Classes of Functional Location and Equipment

    Dear Experts,
    I would like to know how to get all the classes in Classificaition of Functional Location and Equipement, FM ITOB_GET_CLASS_STANDARD is only get 1 class, how do I get all declared classes inside classification?
    Any table or FM?
    Thank you.
    Regards,
    Weng

    Weng,
       Table KLAH would give you all the available classes for every class type.
        FM CLAF_CLASSIFICATION_OF_OBJECT would get you all the assigned classes of a particular type for a object.
    Regards
    Narasimhan

  • Table Link between Functional Location and Class

    Functional location has 'class' ( under section 'general data' in tab 'location'). Could anybody suggest the table name where I can get one to one mapping between the functional location and it's 'class'.
    I have put the functional location in KSSK-OBJEK   but when I am providing the functional location say 
    ?0100000000000838737 in this field of table KSSK, it is resulting no output. Could you please elaborate
    more or suggest something.
    Thanks,
    Hetal

    Hi Gurus
    I am also looking for same information.
    Would you please advise where to get this Internal Type?
    Also would you please advise what is the use of table KSSK in whole process?
    Thanks in advance
    Kris

  • Functional Location and Task List FM

    Hi
    Can you please suggest me Function module for Functional Location(TPLNR) and Task List(PLNTY)
    Thank you in advance

    I need to creat a BOM and FL report, in which user gives input through selection screen and gets some out put in ALV.
    as there are many fields and tables therefore I would like to use FM instead of writing SELECT queries to fetch data to overcome performance issue.
    I have already found CS_BOM_EXPL_EQU_V2 using which I can fetch something around 14 fields out of total 45 field which I need to fetch.
    The rest fields are related to Functional Location and Task List , therefore I need to find out some relevant FM to fetch those fields.
    If you can even suggest me some useful Function Group also, I can search the FMs in it.
    Thanks in advance
    Saeid

  • Functional location and cost center link

    Hi All,
    I need to know the table that contains the details of functional location and the cost center mapped to that.
    I know a table IFLOT which gives details of the functional location, however i do not see field for cost center in that.
    Let me know if there is any other table which gives this data.
    Thanks,
    Regards
    Raghavendra

    Raghavendra,
    Pass the ILOAN of your Functional location to ILOA table and get 'KOSTL' - Cost center.
    Babu

  • Sending Functional Location and Equipments using ALE

    I want to knbow the transaction code for sending the Functional Locations and Equipments.
    Like for Material we have BD10, I need the TCode for both Functional Locations and Equipments
    Also please let meknow the message type and basic types for the same.
    Thanks in advance

    I dont think there is any standard t-code available for distribution of functional area and equipment.  Anyway check the menu path SAP Menu -> Tools -> ALE -> Distribution in applications/Master data distribution.
    For IDOC and Message type details check transaction codes WE30 and WE81.
    Regards
    Vinod

  • Table Link between the Functional Location and work order

    Hi Gurus,
    I am stuck in a big problem and have to find a way to list down the work order with a specific user status in the system. I am trying to link it based on the functional location as the inputs will have to be functional location and the date. Can any one guide me with the tables to link these two???
    Thanks in advance
    Anoop

    Hi,
    Depending on your exact requirement, you might be able to select from view VIAUFKST_IFLOS. This would allow selection based on order, functional location and various dates. The field IPHAS will give you some system status information - value will indicate which status the order has reached. Example value = 3 indicates order is technically completed.
    To get the exact system status (or user status) you need to read the JEST table. Read this table by OBJNR. The object number will have the format OR005000123456 (where 5000123456 is the order number). It will be available in the order tables.
    Status values in JEST are in the internal format - example I0002 = REL. Check transaction BS23 to see the link. User status values will have the format E0002. If INACT flag is set in a jest record then that status value is not active. If you want to check for a specific status value then call function STATUS_READ.
    -Paul

  • Extension functional location and equipment master data

    Hi,
    We have around 200 functional location (having 3 structure indicators) and 10,000 equipments (Having external number range) on a controlling area and on different company codes.
    Several orders have been created by this data and now company wants to change controlling area, company codes, maintenance plants and planning plants with having old data in the same system server and client.
    I want to know is it possible to create same codes functional locations and equipments on new maintenance plants and planning plants having new company codes and controlling area? (It has observed that once we assign maintenance plant, the system automatically picks company code and controlling area and these fields become highlighted and can't be changed) OR
    Is there any possibility to use old data in orders with reference of new plants company codes and controlling area?
    What will be the end solution, should I create the new structure indicators for functional locations and new equipment names that must not be matched with the old equipments?
    Regards,

    Hi,
    Thanks for prompt reply,
    a) If we change permanently then you mean to say the old master data record will remain in the system with all old transaction data, please confirm?
    **b)Alternatively, can I create same (exactly like old codes) functional locations and equipments codes on new maintenance plants (having new company coded and controlling area)?**
    I will have same client and server for the whole scenario 
    Please reply soon
    Best Regards,
    Edited by: PROCESSES EXPERT on Jun 29, 2010 8:36 AM

Maybe you are looking for

  • Query taking so long to execute.

    I have one table with 211 rows, When i am executing Delete from TEHSIL_TBL; its taking too long time to delete 211 rows. I execute explain plan then i am getting the following results. SQL> explain plan for delete from TEHSIL_TBL; Explained. SQL> @C:

  • Purchased videos not displaying on new iPad

    Hello, Recently upgraded to an iPad Air this weekend from an iPad3. The setup assistant was run on the Ipad Air, and I restored to it from my most recent iCloud backup. I noticed after the restore from backup that for some reason, the Videos app on t

  • Why can't I hear any soundtrack?

    Hallo, I am using now PrE 7. I have imported music from itunes (mp4). Everything seems to be perfect, but after reopening the project I can't hear anymore the soundtrack. What can I do? Please answer very simple, because I am really a beginner. Thank

  • I cannot open a file *.pages which has been created few days ago

    Hi All, 2 weeks ago I created a document with extension *.pages. I sent it to my private email box and today I downloaded it. When I am trying to open it, it gives me an error that this file cannot be opened. What happened? How I can open this file?

  • Palivion DV6-2090eo RAM Uppgrade 64-bit Home premium

    Hello! Today I uppgraded my ram memory from 4gb to 8gb. Bios find the memory and windows find it but  says that only 4gb is used out of 8gb installed. In Resource monitor it says that 4gb is hardware reserved. How can I use all of my memory`? Thanks!