PM Order Default Printing

Hi Experts,
We are printing the job card in mass throuh IW38.Here what happening system is printing all the pages once i give the print command.i want to avoid printing some shop paper like there are three shop paper as shown below
123
541
125
i want to print only one shop paper no. 541 may i know how to do this for user specific setting.
Regards,
Kavvya.

Hi,
In IW31, you have the option to select the shop papers based on your requirement. Even in IW38, you may select the shop papers, but its not feasible for the users to select for each & every order.
Its better to go with IMG settings.
Regards,
Maheswaran.

Similar Messages

Default printer in purchase order

Hi Experts,
I have defined one default printer in the message output condition (MN04). When i create purchase order and go to the message type, i can see this default printer there.
But in case i am creating new message in the purchase order, default printer is not appearing. Even i tried to assign default printer in user profile (SU3), but still in communication method, there is not any printer appearing while creating new message manually.
Regards,
Kamal

hi
as u can define the outputs in MN04 from here the printer will be defaulted for that message type
but when u add new message type in PO then u have to define the printer manually ,it will not poopup directly
so either create output manually or just repeate it by clicking repeate output button
or consult ur BASIS person if they have some settings
regards
KI

Changing default printer in Purchase order

Hi
This is Mohammed. Khan, when we are working with these purchase Order T-codes (IW32, IW21, IW28, IW38) When ever we are trying to give purchase order print, than automatically it will take $MECH,at present this printer is not available in our landscape, if there I donu2019t know where this printer is defined exactly, I am searching this particular printer in Output devices(SPAD) but this is not available in that list, can any body tell me how to change the default printer, from purchase order printing list, and also let me know how to set different printer in the place of $MECH printer..
Thank you,
Regards,
Mohammed. Khan

Hi
Try checking NACE transaction, for your output type the default printer assigned (in communication method). And also check defaults tab in user record in SU01 tcode.
Thanks

Work Order printer selection through dialog still picking default printer

Hi,
When i'm printing Work Order (trx: IW32) programs picks up default printer assigned to the user.
in my case this also happening when user selects different printer though dilog.
was trying to get it from NAST-LDEST but in my case NAST is empty and ITCPO pointing to LP01(Local Printer of user).
can anyone please help how to get printer name which is selected by user.
Thanks in advance,
Kian

Hi,
Below code show you the way to assign any printer to form. (Pls find the code in you print prog )
DATA: output_options        TYPE ssfcompop.
DATA: control_parameters TYPE ssfctrlop.
output_options-tdimmed       = 'X'.
output_options-tddest         = 'PR01'. --- > here we can hard code the printer name and pass to FM
control_parameters-no_dialog = 'X'.
CALL FUNCTION fm_name
    EXPORTING
      control_parameters = control_parameters
      output_options       = output_options
      user_settings        = ''
      nota_fiscal            = i_nota_fis
    EXCEPTIONS
      formatting_error   = 1
      internal_error       = 2
      send_error           = 3
      user_canceled     = 4
      OTHERS               = 5.
IF sy-subrc <> 0.
ENDIF.
As you need to know form where the value of output_options-tddest is coming then you can debug the flow and try to find the value of output_options-tddest ...
Pls tell me if you need to know anything else.
Regs,
Lokesh.

Problem printing plant maintenance order (DEFAULT PRINTERS)

Hi,
I configured default printer in SPRO --> Plant maintenance and customer service --> Maintenance and Service Processing --> Maintenance and service orders --> Print control --> Define printer
I created 2 plant maintenance orders to test the printings jobs.
For 2 different orders, I got the following error message in the printing logs (it's in french): INOPÉRANT (means not working in english). What config should I correct. Could the problem be in the orders? Thanks.
TEST IMPRESSION 31.03.2009 u2013 PROTOCOLE IMPRESSION u2013 BORDEREAU 11100942
000011100942 0010 5210A   YUL_CONTROL#2    2060 Bon de main-d'oeuv 3 VALLIEMA   31.03.09   07:20:53
000011100942 0020 5235    YUL_ENTR#6       2060 Bon de main-d'oeuv 2 VALLIEMA   31.03.09   07:20:53
000011100942 0030 5235A   YUL_ENTR#12      2060 INOPÉRANT
000011100942 0040 5235B   YUL_ENTR#9       2060 INOPÉRANT
000011100942 0050 5235C   YUL_ENTR#9       2060 INOPÉRANT
000011100942 0060 5280B   YUL_ENTR#4       2060 Bon de main-d'oeuv 2 VALLIEMA   31.03.09   07:20:53
000011100942 0070 7230I   YMX_ENT#2        2060 Bon de main-d'oeuv 2 VALLIEMA   31.03.09   07:20:53
TEST IMPRESSION 31.03.2009 u2013 PROTOCOLE IMPRESSION u2013 BORDEREAU 13208581
Ordre Nº     Opé. Poste   Uté sortie       APap Formulaire        Cop. Utilis.    Date       Heure
000013208581 0010 5235A   YUL_ENTR#12      2060 Bon de main-d'oeuv 1 VALLIEMA   31.03.09   08:03:16
000013208581 0020 5235B   YUL_ENTR#9       2060 INOPÉRANT
000013208581 0030 5235C   YUL_ENTR#9       2060 INOPÉRANT

Hi,
I am not sure but are you trying to print shop papers at default printer specified in config.First thing is are orders released,I presume they are released hence you are getting message.
Next thing is check config as below:
Application area - O for maint orders
Planning plant - * or define your plant
Planner group - * or same as above
Shop paper - Define shop paper or *
Output device - LOCL or your device property...It is advised to put LOCL as different users can ahave different printers.
Storage mode -1 for printing only
then select print immediately and delete after output.
After this in your master(SU01) define output device as LOCL and this will pick up your default printer of your desktop or working station as configured in windows.
Also check if right shopapers you have assigned to order type,you can confirm them if you see in print preview.
regds,
atul

OS 10.7 won't let me set my default printer

When I go to print, in most programs, it always selects the first lists the first printer in alphabetical order. I set default printer to Last Printer Used and it still brings up the first in line alphabetically. I tried setting default printer to Last Used. Closed the preferences and when I reopen the preferences window, it's been reverted back to Last Printer Used. I even tried clicking the lock to lock the settings, but it still reverts back. It's driving me crazy. The printer that always comes up is a wide format and I have come close to printing emails to it instead of the black and white laser printer.

See this thread with dominic23’s suggestions: https://discussions.apple.com/thread/5783326?tstart=0

Default printer resets at each reboot after installing Acrobat X Pro

I installed Acrobat X Pro yesterday, and updated it after the install to version 10.1.4. Since that time my default printer has been reset after each computer reboot to the first physical printer on my printers list - an HP 5900 series. I want my default printer to be my HP 6940, which is local, connected by USB, and have gone into Start/Printers and Faxes on my Windows XP Professional machine to do this. But each time I reboot, the default is switched back to the HP 5900. The printers have been installed on my machine for years with no issues, and I had Acrobat 9 Professional on my machine until yesterday - with no issues. I tried live chat for help, but the representative told my it was a physical printer issue and I needed to contact HP. Can you help me stop my computer from resetting the default printer each time it is shut down?
The order of printers listed on my machine:
Adobe PDF
HP 5900 Series
HP 6940
(several network printers listed below here)
Thanks!
Bryan

Hi William ,
Please perform the following steps .
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check
Regards
Sukrit Dhingra

Setting new Default print settings

I have a HP Photosmart 7525 All-In-One... I would like to know how to set my printer "Default Settings" to 'Fastdraft-Black and White'... I'm using Mac OS X 10.10.4 Yosemite... Help!

Hi,
Follow the steps below in order to print using Black Ink only:
1. From the application used to print, click the File menu and select Print.
The Print window appears.
NOTE: The Print window might be minimized: Click the Show Details button to see all available settings.
2. To access the color options, click the lowest selection box listed as the name of the program (e.g. TextEdit)
Will appear as Copies & Pages within Microsoft Office applications.
3. Select Paper Type/Quality from the drop-down menu.
4. Click the triangle next to Color Options to expend the settings.
5. Set the Color field as Grayscale.
6. Set the Grayscale Mode as Black Ink Cartridge Only and reduce the print quality.
You may save the settings for future use by clicking Presets > Save Current Settings as Preset... any used preset will remain default till using another preset.

Windows Default Printer to be picked automatically

Hi All,
My Client requirement is to have the Window's default printer to be used as the default printer to print the SAP documents (PO).
User insists not to change the SU3 default printer and want to leave it blank and want the printer assigned to system/machine to be considered as default printer. How can we meet this requirement?
Thanks in Advance
Shash

How did you test.
I usually test with printing a stock overview of a material from MMBE.
Purchase order printing is a kind different, as this is usually done via message conditions, but it can be setup to work with printer from user profile.
LOCL printer has to be defined by your basis team in transaction SPAD, and the link to the frontend printer is made there.

Default printer on domain computers changes when print spooler is restarted

Hi.
It has been brought to my attention that all of my Windows 8.1 machines on our domain change their network default printers when the print spooler is restarted. Printers are being assigned by group policy, using the print management tool, as Branch
Office Direct IP printers.
A little bit of research indicates that the default printer is changing "BY DESIGN!!!???" to the last printer being assigned in the OU. Gotta say....if this is by design, it's a bad design! As well as unacceptable. Then I discover
that the default printer precedence is something like 1. Locally installed printers, 2. Software installed printers, 3. Network printers in reverse order that they are assigned in the OU. COME ON!! I.e., changing the order of assignment in the
OU is useless because local printers and software installed printers are still taking precedence, and on every log in the users default printers are being changed to something as useless as WebEx Document Loader.
I know this is a radical thought.....but how about if the default printer stays set to whatever the user sets it to?? That way, they won't hate me and curse me. Selfish, I know.
I am shocked by the lack of information that I am finding for this simple and sensible option, and am accordingly loosing faith in Microsoft by the day, and beginning to feel that the end really is nigh for this platform, because I seriously don't appreciate
absorbing hostility that is better directed at them, and self-preservation instincts do eventually kick in.
Can somebody tell me how to prevent user selected default network printers on domain computer's from changing when the users log off, before the lynch mob gets here?
To be clear, these are domain computers. Users are not administrators. Printer assignments are made via group policy. Users do not wear glass slippers (so solutions requiring manipulation of special footwear will not be effective).
THANKS

Hi,
Please refer to this similar thread Althornin's solution to add the registry to see if it could be fixed.
Go and edit the users registry hive:
HKEY_USERS\USERS_SID_HERE\Printers\Connections
Found old printer connections there that were no longer valid. Upon clearing those out, after a reboot, the problem went away.
I also cleared out the HKEY_USERS\USERS_SID_HERE\Printers\Settings key - the users had old printer setting sid there also.
https://social.technet.microsoft.com/Forums/windows/en-US/316fd408-4957-43b1-92e3-8dda96dcdded/default-printer-keeps-changing
Karen Hu
TechNet Community Support

How to setup default print to landscape in Reportviewer (printmode activex)

We have an ASP.NET (2008) application and use the ReportViewer Web Control to show a Crystal Report on the client browser.
   - We set the "PrintMode" property to ActiveX in order to print to the client's local printer.
   - We set up the Landscape in Crystal Report Page setup.
   - We also put repdoc.PrintOptions.PaperOrientation = PaperOrientation.Landscape in the program.
The problem is when the user clicks the print icon, the report prints in portrait, not landscape.
Is there a solution for this or is this a software limitation?
Thanks.

How to setup default print to landscape in Reportviewer (printmode activex)
Hi David,
Yes, I tried that 1196969 solution first, but it didn't work. I saw all the discussion in the below thread and it seems a product issue mention by you on Aug 6, 2008 3:19 PM
CrystalReportViewer default PageOrientation ASP.NET VS 2008
I don't know if the fix works for CrystalReportWebFormViewer4 which is what we have on the web server. I put debug alert in the Javascript of the following file
WindowsMicrosoft.NETv2.0.50727ASP.NETClientFilesCrystalReportWebFormViewer4crystalprinthost.html
I can see the call goes to the file, but won't get to the window.dialogArguments.paperorientation condition.
When I write out: window.dialogArguments.paperorientation; it pops up "undefined".
Is there any updated solution for CrystalReportWebFormViewer4?
Thank you!!

LT31 - Default print code at User Level

Dear All,
Is it possible to default PRINT CODE(Print control data) in LT31 t-code at user level. Thanks in advance.
Regards
Ramprakash

In WM is in general no user-specific printing, but SAP offers 2 workarounds see the details in the KBA 1847818 - Unable to assign a specific printer to a user when printing Transfer Orders in WM

Default printer in classic environment

After upgrading to 10.4.4 the default printer in Classic is changed to the default printer in OSX.
If I want to print from a Classic application the first time before the print dialog is displayed I get an error message stating that apple events are not supported or that desktop printing is not installed. In the printer dialog that shows up my appletalk printer with the name I have given the printer in OSX is shown and when I select the os9 name printing is fine until classic restarts.
How can I select the default printer from wihtin Classic?

Guys, this should be a software problem with the system, so we should expect it would happen with all printers, with a Brother printer and also with a LaserWriter Pro (10+ years old!) but assuming that Cube does have identical symptoms to Erik there are at least two things going on here.
What it defaults to should be quite separate from those errors for AppleEvents and desktop printing software 2.0. Those seem to be about whether something is configured corrctly, not about what's selected.
If this is always solved by reselecting the correct printer, I'd grin and bare it.
However, with no other symptoms, those errors suggeset a mismatch or misconfiguration.
Some printers are much more fussy than they should be about the version of LaserWriter, and of auxilliary printing Extensions certainly including PrintingLib. The natural assumption is that the latest version will cover everything, but I've met printers which required downgrades…
Although I haven't seen this recently, for early Classic some printers needed their 9 drivers installing once while booted in pure 9, then again while running Classic over X - and if that's your case I hope your Macs are old enough to boot in pure 9.
With or without that, it may simply matter which order 9 and X drivers are installed in.
Again, are you using third-party RIP software? I don't know that desktop printing software 2.0 refers to anything from Apple and some time ago there was a spate of reports by people using a third-party utility with a name too like that to ignore, which no-one could find anywhere on the web but which turned out to refer to a third-party RIP that did work with 9 but never with Classic.
Meanwhile my Classic 9.2.2 over 10.4.4 on my G4 DP 1K defaults to the X printer but so does Classic 9.2.2 over 10.4.3 on my Titanium lappie, which seems to indicate this is not a 10.4.4 thing though I don't remember how the G4 behaved on 10.4.3 (and if I'd seen Cube's message one minute later, I would already have started the 10.4.4 updater running on the lappie. Phew!)
I very much doubt that can be solved: I suspect it's a design fault in the way Classic and X communicate and in my case I change printers so often that again, checking Chooser one extra time is hardly noticable.

Colour management and ordering Aperture prints

I have recently ordered some prints in Aperture. When they arrived the colours were not exactly true to the original picture on the screen.
The monitor was calibrated before ordering prints, but I wonder if there is anything else I need to do to improve the quality.
Should I be using gamma 1.8 or 2.2? Any tips on soft proofing the photos before I order them would be very much appreciated.
Thanks.
Adrian

My experience with the build-in ordering system of Aperture has not been very positive. I have stopped using it. My last set came out with too high a contrast and was over-sharpened. A previous order had noticeably different color for the same photo printed in two different sizes (and different again from my calibrated screen).
Depending on the country your living in, different labs will be used, so experiences will differ. I have got my prints from the Netherlands, although I do not live in the Netherlands directly.
I have since switched to a much more expensive local lab, color is much closer to what my screen shows. Matching general impression of brightness and contrast is still not perfect though.
It usually is best to use a gamma of 2.2, if only because once you leave a color managed world (eg, your photos are displayed on any other web browser than Safari, or vice versa, you view images with Firefox) the default assumption is almost always a gamma of 2.2.
One 'problem' with most cheapish labs is that they often apply some sort of automatic correction which can easily negatively affect your photos.
One indicator for a good lab is that they are offering ICC profiles.

Override default printing behaviour

Hi all,
I would like overriding the default printing delivery behaviour. What should I do in order to archive this? should I implement a java class? if yes, which class has have to be inherit from? and how to register the class such that this class is being called?
Thx
Reards,
whching

Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
http://forums.mozillazine.org/viewforum.php?f=25 <br />
You'll need to register and login to be able to post in that forum.

PM Order Default Printing

Similar Messages

Maybe you are looking for