PM order number range
I have 8 types of PM orders and I want to define separate number range for each
PM01 - 910000000 to 919999999
PM02 - 920000000 to 929999999
PM08 - 980000000 to 989999999
I have tried to insert new group for these number range. But it is not showing the group in the system.
Where m I mistaking ?
I have done same with notification number range it is happening there.
Regards,
VM
Edited by: V M on Jul 2, 2008 10:46 AM
Hi
Pls See the steps below
select the number range in SPRO
1.Click Change group Icon
2 Select group in application tool bar and select insert
3.Give Your number range
4.Give short discription
5.Click Select icon next to red cross icon
6.Now select your order type and under non assigned
7.Select the new number range group
8.Enter select
This way your oder type will be assigned to the new number range
Follow sam procedure for rest order type
Regards
Anil Kumar
Anil Kumar
Similar Messages
-
Service order number range creation
Hi,
Could anyone please tell me how can we create service order number range if we have done a new service order type creation, and what should we do: should we create the number range in development and then transport it to the production or we should directly create it in production.
Thanks and RegardsHi,
Please guide me what should we first do to transport the service order type transport request to prd.
1.Should we first transport the request for other components of the service order type?
2.Then should we transport the request for number range or we directly create it in production server?
Please guide.
Thanks and Regards
Edited by: MPVash Vash on Sep 8, 2008 7:53 AM -
Hi Gurus,
I am having two plants defined in one company code.
Is Planned order number range plant specific?
My planned order number range in plant-1 is 1000-2000 and it is same in the Plant-2. If I create the planned orders in both plants.
What is starting number for planned orders in each plant?
Can I create like this?
Thanks in advance.
Regards,
Jejesh
Edited by: jejesh yal on Sep 30, 2008 9:25 PMHello,
If you are creating Planned order using the MRP, you can set the plant specific Number range for planned Order at OPPQ
Please check with planned order Number range tab at OPPQ
Regards
Pradeep -
Demerger Purchase order number range.
Hi Friends,
We have demerger of 1 of hte business of the company & new entity will be using same client which we are using.
We will be Creating new Purcharse orders with open amounts for new legal entities.
Here requirement for purchase order number range is as belows. How can we achieve this.
Our advice for number range is to use a prefix + old PO number, to ensure the incoming invoices can be easily assigned.
Thanks,
KiranHI,
You may define external number range as shown below, for example:
Assign the same as external number range for the PO Doc type:
While creating the PO, maintain the number range externally with the required prefix + old PO number.
Test the same and revert back.
Regards,
AKPT -
Planned order number range in apo
Where planned order number range can be maintain in apo.
I am converting agreed plan into planned order but planned order number has generated.
Please somebody tell me.
Regards,
SunillPlanned order number ranges can be maintain in
sproaposupply chain planningppdsglobal settings--maintain number ranges for orders.
and then you assign the number ranges in
sproaposupply chain planningppdsglobal settings--maintain global parameters and defaults (in planning tab ) -
Why after new changes in internal orders settings order number ranges lost?
Dear Gurus,
We have noticed that order number ranges are being lost from time to time.
Than we have analysed that sometimes it happens after new transfers with new orders settings.
Why the system behaves like that?
And how can we avoid this problem?
With best regards,
Kamila.The process is as below to assign/change number ranges to order types
Create Order type at KOT2 (KOT2_OPA) and enter Order Category ...say 01
Enter Order type name and description and SAVE
Select Number range Interval assingment Icon
At last row of the number range screen you can see your newly created Order Type
(Put the cursor on your order type and press F2) and Select the check box of group under which you need to assign and press F5
Now the newly created order type has been assigned and new number range has been assigned
So you can change existing order type also as mentioned above (even after posting made to that order types)
This could be the reason for changing number ranges to order types
Please take care while assigning number ranges to a new order types. Do not touch number ranges of existing order types
Srinivas -
Best Practice for Change Maintenance Order Number Range
Hello
We have decided that our Maintenance Orders will always start with the year of the open date. Example 201112345155
Every year we will need to change the number ranges
What is the best practice to change the order number range? What is the best approach here?
I have also another question. Why the "Current Number" is not incremental?
Thanks for the helpHi,
The current number can be explained by use of buffering of the numbers. Buffering is defined via transaction SNRO, the AUFTRAG object is relevant for orders. When buffering is active, a set of unused numbers are assigned to each application server.
In your example - The fiirst 20 numbers were taken from the available number range and assigned to the buffer (possible 10 numbers to each of two servers). As orders are created a number is assigned from the buffer. Once the buffer values are used a further set of numbers are taken from the number range and the current number is increased (by buffer value).
-Paul -
Cannot create work order number ranges
Hi Gurus,
I am working on ECC->XI->SNC systems. I want to maintain work order number ranges in SNC but I am encountering an error or "User is not assigned to a suitable business partner" and also there is no Append Row button to define work order number ranges. Can you please help me configure the user properly? Also, how will the Append Row button appear in SNC? I would appreaciate if you can also provide reference materials on this. Thanks.Hi,
You are getting this error "User is not assigned to a suitable business partner" because the user through which you've logged in is not assigned to any Business Partner of type "Organisation".
If it it is an internet user, you should assign it to your plant (if he is on the customer side) or Vendor.
The relationship to be maintained it "Is SNC User of".
Regards,
Sandeep -
Dear All,
I have a Problem with process order Number ranges,
please find the sequence below.
21000200
21000220
21000240
21000260
21000280
21000300
21000320
21000321
21000322
21000340
21000360
21000380
21000381
21000400
21000401
21000402
21000403
21000420
21000421
21000422
21000423
Please anybody help me in this.
How to get contineus numbers.
Where I need to check, Please specify.
Thanks & Regards,
Anand.MDear,
Go to SNRO t-code.
In this t-code enter AUFTRAG object.
This object is for Order type.
Here you will get option No. of Numbers in buffer check it. This is the field which is responsible for number range buffering
Regards,
R.Brahmankar -
Hi Gurus,
How do you exactly add/create Number Range Groups for process orders?
Thanks,
KumarHi Kumar,
Assigning number range
There are two types of number assignment:
Internal
When saving a data record, the SAP System assigns a sequential number that lies within the corresponding number range interval.
External
When saving a data record, either you or an external system assigns a number. You need to ensure that the number lies within the corresponding number range interval.
In CO82..
Menu path Group -->maintain
In maintain number range group screen,
Group --> insert
Give text and from number and to number
say text = new order say For FG
range - 1xxxxxxxxx to 1999999999999 (tick ext check box if the range is external number range-manual input)
click on +
You can see your group at the end of list
In Not assigned group your new order type will be present
Place the curser on that order type and fallow the menu path as below
Edit -->select element
Select NEW order number range group check box
edit --> assign element group.
Now the number range is assigned to the order type. Save it, You will get a pop up, just ignore it.
Please try and come back.
Regards
R.Brahmankar -
Enhancement for Production Order Number Ranges
Hi
Are there any enhancements for production order number ranges. We have the setting as external numbering but need to set the order numbers (alphanumeric) based on certain conditions.
Thanks & Regards.
Sam.Hi Sam,
PPCO0007 .......check this one.....
i guess it is helpful
Regards,
Bhaskar -
Production Order Number Range - Not Continuous
Hi Team,
I have assigned the internal number range for my order type in CO82. When the system assigns the internal number (my production order is 10 digit number) to my production order, the number is getting assigned continuously. For example, if the last created production order number is 2481000001 , i am expecting the next number as 2481000002. But system is creating some number like 2481000023. In-between many numbers are missed. Why?
Production Order Number Range Assigned: From: 2481000000, To:2481999999 (Internal Number range)
ThanksHi Caetano,
As described in the note 62077, i can do the following setting.
1. Deactivate buffering: Choose 'Edit' -> 'Set Up Buffering' -> 'No Buffering'.
2. If you want to change the buffer size only, enter the corresponding value in the field 'No. of numbers in buffer'.
Case 1:
If i activate the option "No Buffering" for object "auftrag", will it have any negative impact like performance of the system?
Should i need to activate the option "No Buffering" for object "auftrag" before creating the production order?
Case 2:
I do not want to deactivate the buffering. But i will set the 'No. of numbers in buffer'as ONE (1). I think with this settings, the numbers will be always continuous. Will it have any system performance impact?
Thanks -
Purchase order number ranges plant wise
Hi ,
Requirement is , want to have purchase order number plant wise. I know that we can have different number ranges for different document types in standard SAP. But how to achieve different number ranges for purchase order plant wise.?
Is there any user exits available for this?
regards,
abiHi,
it is possible through a BADI to get the separate number ranges for plant wise PR/PO,
but u need to maintain a customised table with number ranges and plants,
whenever the user try to save a PO/PR the syatem will pick the number range from the customised table,
that BADI is ME_PROCESS_PO_CUST,
it is very useful if any client has number of plants like 30 or 40 plants,
and it is easy track the PO from where it has raised.
rgds -
Hi,
I hv 2 plants say 1000 & 2000
In both plants products are define with 2 different catergories say Residential and Industrial.
Now if m define order type as per above two category say Z001 and Z002 in both plants.
so can it possible to give different number ranges in both plants with same order type.
As per my knowledge number ranges is at client level.
But if i want to define at plant specific with same order type, so can it possible?
Plz clear me?
Regards
RajeshHi,
Its 100% Possible , You must be maintain Group and there Number range define , After that , Oder type assign here.
There order Type Number may be external or internal as per your requirement.
I hope your purpose will be solve -
Internal Order Number Ranges & Order Types
hi,
i am facing a problem when creating order groups & number ranges it is not appearing in the screen how to over come this problem
with regards,
jayaprakashHi
Goto TCode KONK
Select Groups
Goto Menu Group and select Insert and enter your text and interval number from and to which are not overlapping
Then Select the newly created Group and put a cursor on the element
Goto menu Edit and select Assign Element group
SAVE
Cheers
Srinivas -
Hi gurus
I moved my new Order type into QE and also the new number range to be used with this new Ordertype.
However when I look in the "Define Order type" configuration , the number range interval is "Not assigned".
If I go into "Maintain Number Ranges for Orders" and add my new order number interval
on transction KONK and click on Interval > transport, I get the message..
" In the target system, all intervals of selected number range object are
deleted first so that only the exported intervals exist after the import.
The number statuses are imported with the value that they had when exported
Dependent tables are not transported or
converted.
Do you want to transport the intervals?
Yes...NO cancel.
When I click Yes It is prompting for transport. My question, IF I move this transport into target client, will SAP erase all number intervals?, I am not sure as how to assign my new number interval for my new Internal Order type.
Many thanks in advance.
MSJHI,
In case of internal order, the number ranges are not transported to QA or Prod servers we have to configure the number ranges. After the transport
With Regards
Babu
Edited by: Babu on Feb 27, 2009 2:46 AM
Maybe you are looking for
-
Need to add text with box dynamically
Hello, I need to add a standard text created in so10 with a box at the end of the purchase order. This should trigger dynamically if the condition is correct. For ex : PO created in plant = 100 then this text should be displayed at the end of the PO
-
Sat P10: keyboard doesn't work because of liquid
hi! I spilled coca cola on my laptop...fortunately everything is working fine. The problem is that some keys in my keyboard are difficult to press as a result of the coca cola and i don't know how to clean it. Is it possible to remove it in order to
-
How to Change Appearance of "Top-Level" Wiki Server Pages?
In Mountain Lion Server t is easy enough to change the appearance of our Wikis, Personal pages and their attached blogs - simply by going to "Wiki Settings...->Appearance" or "My Settings...->Appearance". This allows us to change the background patte
-
Naming Conventions for Workflow
Hello, does anybody have a document for Naming Conventions for Workflow. I found nothing the last hour. Thanks in advance for any help ... Stefanie
-
I just d/lded the recent version upgrade, and now my thumbnails have disappeared, and my ability to select them under theview tab is greyed, so I cannot select same. Any suggestions?